Mechanical Engineering Commons^™

A Minimum-Impact Method For Measuring Corrosion Rate Of Steel-Hulled Shipwrecks In Seawater, Matthew A. Russell, David Conlin, Larry E. Murphy, Donald L. Johnson, Brent Wilson, James Carr

Department of Mechanical and Materials Engineering: Faculty Publications

Current research on USS Arizona is focused on a minimum-impact technique for calculating corrosion rate of the battleship’s steel hull by analyzing physical and chemical properties of marine encrustation covering the exposed hull. An equation is derived that allows concretion thickness, density, and total iron content to be used to calculate corrosion rate of steel hull plate.

Comparative Modeling Of Performance Limits Of Solid State Neutron Detectors Based On Planar B-Rich Capture Layers, A. D. Harken, Brian W. Robertson

Department of Mechanical and Materials Engineering: Faculty Publications

Solid-state neutron detectors based only on boron-rich semiconductors are of interest for their potential to provide the highest thermal neutron detection efficiencies of any solid-state neutron detectors. A simple physical model, recently shown to generate thermal neutron capture product spectra that agree quantitatively with full-physics GEANT4 simulation, is used to compare the capture product energy spectra and the upper limits to neutron detection efficiency of planar conversion layer, sandwich and all-boron-carbide detectors for the case of normally incident, mono-energetic, thermal neutrons. All-boron-carbide semiconductor detectors are deduced to be greatly superior to all other boron-rich solid-state detector types in their maximal …

Non-Operative Management Of Posterior Tibialis Tendon Dysfunction: Design Of A Randomized Clinical Trial [Nct00279630], Kornelia Kulig, Amy B. Pomrantz, Judith M. Burnfield, Stephen F. Reischl, Susan Mais-Requejo, David B. Thordarson, Ronald W. Smith

Department of Mechanical and Materials Engineering: Faculty Publications

Background: Posterior tibialis tendon dysfunction (PTTD) is a common cause of foot pain and dysfunction in adults. Clinical observations strongly suggest that the condition is progressive. There are currently no controlled studies evaluating the effectiveness of exercise, orthoses, or orthoses and exercise on Stage I or IIA PTTD. Our study will explore the effectiveness of an eccentric versus concentric strengthening intervention to results obtained with the use of orthoses alone. Findings from this study will guide the development of more efficacious PTTD intervention programs and contribute to enhanced function and quality of life in persons with posterior tibialis tendon dysfunction. …

The Role Of Electrospinning In The Emerging Field Of Nanomedicine, S. Y. Chew, Y. Wen, Yuris A. Dzenis, K. W. Leong

Department of Mechanical and Materials Engineering: Faculty Publications

The fact that in vivo the extracellular matrix or substratum with which cells interact often includes topography at the nanoscale underscores the importance of investigating cell-substrate interactions and performing cell culture at the submicron scale. An important and exciting direction of research in nanomedicine would be to gain an understanding and exploit the cellular response to nanostructures. Electrospinning is a simple and versatile technique that can produce a macroporous scaffold comprising randomly oriented or aligned nanofibers. It can also accommodate the incorporation of drug delivery function into the fibrous scaffold. Endowed with both topographical and biochemical signals such electrospun nanofibrous …

Test 1891: Kubota L5030 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1881: Mccormick Xtx 200/Mtx 185 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1875: Challenger Mt 635b Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1878: Challenger Mt 665b Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1883: Agco Lt75a Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1889: John Deere 8430t 16 Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1871: John Deere 5203 Diesel 9-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Test 1870: John Deere 5103 Diesel 9-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Test 1884: John Deere 8130 Diesel 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Test 1888: John Deere 8330t Diesel 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Test 1887: John Deere 8330 Diesel 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Test 1885: John Deere 8230 Diesel 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Test 1882: Mccormick Xtx 215 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1876: Challenger Mt 645b Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1890: John Deere 8530 Ivt, Nebraska Tractor Test Lab, John Deere

Nebraska Tractor Tests

No abstract provided.

Test 1873: John Deere 8430 16 Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1874: John Deere 8430 Ivt, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1872: John Deere 5303 Diesel 9-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Test 1886: John Deere 8230t Diesel 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Nebraska Summary 559: Massey Ferguson 5470 Dyna 4 Diesel 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Test 1877: Challenger Mt 655b Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

E(Fg)2: A New Fixed-Grid Shape Optimization Method, Florin Bobaru Ph.D., Srinivas Rachakonda

Department of Engineering Mechanics: Faculty Publications

We propose a shape optimization method over a fixed grid. Nodes at the intersection with the fixed grid lines track the domain’s boundary. These “floating” boundary nodes are the only ones that can move/appear/disappear in the optimization process. The element-free Galerkin (EFG) method, used for the analysis problem, provides a simple way to create these nodes. The fixed grid (FG) defines integration cells for EFG method. We project the physical domain onto the FG and numerical integration is performed over partially cut cells. The integration procedure converges quadratically. The performance of the method is shown with examples from shape optimization …

Optimization Of Multilayer Wear-Resistant Thin Films Using Finite Element Analysis On Stiff And Compliant Substrates, R. K. Lakkaraju, Florin Bobaru, S. L. Rohde

Department of Engineering Mechanics: Faculty Publications

Extensive research has been carried out by researchers on the growth and characterization of multilayer protective coatings, but the design of these coatings still remains largely empirical. In this regard, recent progress has been made in developing a design approach for optimizing a multilayer coating structure before deposition, which would help save time and material. In pursuit of an optimal design, finite element analysis using a plane strain Hertzian contact model was developed to investigate the stress/ strain behavior within the layers of the system. The present study looks to find the optimal thicknesses of individual layers in a multilayer …

A Model For Predicting The Evolution Of Multiple Cracks On Multiple Length Scales In Viscoelastic Composites, David H. Allen, C. R. Searcy

Department of Engineering Mechanics: Faculty Publications

A model is presented herein for predicting the evolution of numerous cracks on multiple length scales, the objective of such a model being to develop the capability to predict failure of structural components to perform their intended tasks. Such a capability would then be useful as a predictive tool for designing structural components so as not to fail, but rather to succeed in performing their intended tasks. The model developed herein is somewhat involved, being based in continuum mechanics and thermodynamics, but is nevertheless expected to be cost effective (wherever sufficient accuracy permits) when compared to more costly experimental means …

Efficient Inverted Polymer Solar Cells, G. Li, C.-W. Chu, V. Shrotriya, Jinsong Huang, Y. Yang

Department of Mechanical and Materials Engineering: Faculty Publications

We investigate the effect of interfacial buffer layers—vanadium oxide (V₂O₅) and cesium carbonate (Cs₂CO₃)—on the performance of polymer solar cells based on regioregular poly-(3-hexylthiophene) and [6,6]-phenyl C₆₀ butyric acid methyl ester blend. The polarity of solar cells can be controlled by the relative positions of these two interfacial layers. Efficient inverted polymer solar cells were fabricated with the structure of indium tin oxide (ITO)/Cs₂CO₃/polymer blend/vanadium oxide (V₂O₅)/aluminum (Al). Short-circuit current of 8.42 mA/cm2, open-circuit voltage of 0.56 V, and power conversion efficiency of …

Improving The Power Efficiency Of White Light-Emitting Diode By Doping Electron Transport Material, Jinsong Huang, Wei-Jen Hou, Juo-Hao Li, Gang Li, Yang Yang

Department of Mechanical and Materials Engineering: Faculty Publications

Highly efficient white light emission was realized via the partial energy transfer from blue host polyfluorene (PF) to orange light emission dopant rubrene. A more balanced charge transport was achieved by adding an electron transport material, 2-(4-biphenylyl)-5-(4-tertbutylphenyl)-1,3,4-oxadiazole (PBD), into the PF-rubrene system to enhance the electron transportation. Efficiency improvement by as much as a factor of 2 has been observed through the addition of PBD. These devices can easily reach high luminance at low driving voltages, thus achieving high power efficiency at high luminance (14.8, 13.5, and 12.0 lm/W at the luminances of 1000, 2000, and 4000 cd/m², …