Mechanical Engineering Commons^™

Habitat For Humanity Case Studies, Florida Solar Energy Center, Janet Mcilvaine

FSEC Energy Research Center®

This document is a compilation of four separate case studies of Habitat for Humanity affiliates who have adopted Building America principles of high performance as standard construction. This work was compiled by the Building America Industrialized Housing Partnership (www.baihp.org ) for the U.S. Department of Energy to serve as a model for other affordable housing providers. BAIHP is led by the Florida Solar Energy Center of the University of Central Florida.

Pv Training Laboratory Design Manual, Florida Solar Energy Center, William Young

FSEC Energy Research Center®

This document serves as a written summary of some of the elements required for the design, specification, construction and operation of a successful laboratory for the training of photovoltaics systems. This document only discusses the equipment requirements for such a lab. A successful training lab for education and certification also requires qualified and trained personnel; in-service training to maintain competency; procedures and protocols for curriculum, evaluation, and reporting; careful adherence to the relevant Standards; protocols for quality assurance and calibration; detailed documentation of all procedures and protocols. Accreditation of the lab by an independent evaluating agency is also useful in …

Cost-Effective Energy-Efficiency And Florida's Residential Energy Code, Florida Solar Energy Center, Philip W. Fairey

FSEC Energy Research Center®

The 2007 Florida Legislature authorized the Florida Building Commission (FBC) and Department of Community Affairs (DCA) to evaluate cost effectiveness of energy conservation measures including appliance efficiencies that could be implemented through the Florida Energy Code for certain buildings. Additionally, Governor Crist's Executive Order #07-127 requires the Secretary of DCA to "convene the Florida Building Commission for the purposes of revising the Florida Energy Code for Building Construction to increase the energy performance of new construction in Florida by at least 15% from the 2007 Energy Code. The Commission should consider incorporating standards for appliances and standard lighting in the …

Experimental Evaluation Of The Nightcool Nocturnal Radiation Cooling Concept: Annual Performance Assessment In Scale Test Buildings, Florida Solar Energy Center, Danny Parker

FSEC Energy Research Center®

An experimental evaluation has been conducted on a night sky cooling system designed to substantially reduce space cooling needs in homes in North American climates. The system uses a sealed attic covered by a highly conductive metal roof (a roof integrated radiator) which is selectively linked by air flow to the main zone with the attic zone to provide cooling--largely during nighttime hours. Available house mass is used to store sensible cooling. Additional dehumidification is done during the evening hours as warranted by interior conditions.

An initial report describes a detailed simulation model of the relevant night cooling phenomenon, examining …

Pilot Evaluation Of Energy Savings From Residential Energy Demand Feedback Devices, Florida Solar Energy Center, Danny Parker

FSEC Energy Research Center®

Providing instantaneous feedback on household electrical demand has shown the promise to reduce energy consumption by 5-15%. This paper briefly reviews past research and describes a two year pilot evaluation of a low cost residential energy feedback system installed in twenty case study homes in Florida. Although not a statistical sample (the participants were self-selected), the study showed an average 7% reduction in energy use from feedback homes in the second year of monitoring after controlling for weather-related influences. A large identified advantage of the technology is that it provides better guidance on profitable areas to reduce household electrical demand--many …

Deploying Mobile Pv Emergency Power System In A Disaster, Florida Solar Energy Center, William Young

FSEC Energy Research Center®

Disasters can be as destructive as Hurricane Katrina, leaving several hundred-thousand people homeless, or as minor as an afternoon thunderstorm that brings down local power lines to your home. After a disaster, utility services may be damaged or destroyed, leaving people without water, sanitation, communication and electricity. In response to a disaster, first responders are deployed with life supporting resources, such as water, food, and medical supplies. Energy resources are often lacking, making recovery efforts difficult in our high-tech world of cell phones, television, computers, refrigerators and many other electronic devices.

After a disaster, the long time tradition used to …

Using Show Homes (And Sponsorships) To Persuade Commissioning Relevancy And Factory Crafted High Performance Modular Homes, Florida Solar Energy Center, Stephanie Thomas-Rees

FSEC Energy Research Center®

The International Builders' Show (IBS) sponsored by the National Association of Home Builders is a venue attracting over 100,000 builders and building related professionals every year. The increased attendances each year improves the educational sessions, vendor participation and "live" home construction demonstrations. The "live" home demonstrations are a great opportunity to integrate high performance construction and commissioning strategies into the marketplace to validate and distinguish products and the show home builders. At this past year's IBS show in February, Palm Harbor Homes built the GenX home that included an installed and operational 4.08kWp photovoltaic system with inverter and back up …

Mapping Of Pressure Losses Through Microchannels With Sweeping-Bends Of Various Angle And Radii, Chase Hansel

Electronic Theses and Dissertations

MEMS (Micro Electro Mechanical Systems) have received a great deal of attention in both the research and industrial sectors in recent decades. The broad MEMS category, microfluidics, the study of fluid flow through channels measured on the micrometer scale, plays an important role in devices such as compact heat exchangers, chemical and biological sensors, and lab-on-a-chip devices. Most of the research has been focused on how entire systems operate, both experimentally and through simulation. This paper strives, systematically, to map them through experimentation of the previous to untested realm of pressure loss through laminar square-profile sweeping-bend microchannels. Channels were fabricated …

Design And Fabrication Of Chemiresistor Typemicro/Nano Hydrogen Gas Sensors Usinginterdigitated Electrodes, Peng Zhang

Electronic Theses and Dissertations

Hydrogen sensors have obtained increased interest with the widened application of hydrogen energy in recent years. Among them, various chemiresistor based hydrogen sensors have been studied due to their relatively simple structure and well-established detection mechanism. The recent progress in micro/nanotechnology has accelerated the development of small-scale chemical sensors. In this work, MEMS (Micro-Electro-Mechanical Systems) sensor platforms with interdigitated electrodes have been designed and fabricated. Integrating indium doped tin dioxide nanoparticles, these hydrogen sensors showed improved sensor characteristics such as sensitivity, response and selectivity at room temperature. Design parameters of interdigitated electrodes have been studied in association with sensor characteristics. …

Methane And Dimethyl Ether Oxidation At Elevated Temperatures And Pressure, Christopher Zinner

Electronic Theses and Dissertations

Autoignition and oxidation of two Methane (CH4) and Dimethyl Ether (CH3OCH3 or DME) mixtures in air were studied in shock tubes over a wide range of equivalence ratios at elevated temperatures and pressures. These experiments were conducted in the reflected shock region with pressures ranging from 0.8 to 35.7 atmospheres, temperatures ranging from 913 to 1650 K, and equivalence ratios of 2.0, 1.0, 0.5, and 0.3. Ignition delay times were obtained from shock-tube endwall pressure traces for fuel mixtures of CH4/CH3OCH3 in ratios of 80/20 percent volume and 60/40 percent volume, respectively. Close examination of the data revealed that energy …

Water Footprint Of Aviation Fuel Synthesis By The Fischer Tropsch Process Using Sugar Cane Waste & Landfill Gas As Feedstocks, Slim Menzli

Electronic Theses and Dissertations

The recent spikes in oil prices have spurred an already bullish demand on biofuels as a source of alternative energy. However, the unprecedented price records set simultaneously by staple food have raised high concerns about potential impacts of biofuels on the global agricultural landscape as fuel and food markets are being inextricably coupled. The revival of interest in the Fischer-Tropsch (FT) process comes into full force since it offers a promising way to produce carbon-neutral liquid fuels which are readily usable with today's existing infrastructure. The FT synthesis offers the possibility of using crop waste as feedstock instead of the …

Fundamental Study Of Fc-72 Pool Boiling Surface Temperature Fluctuations And Bubble Behavior, Alison Griffin

Electronic Theses and Dissertations

A heater designed to monitor surface temperature fluctuations during pool boiling experiments while the bubbles were simultaneously being observed has been fabricated and tested. The heat source was a transparent indium tin oxide (ITO) layer commercially deposited on a fused quartz substrate. Four copper-nickel thin film thermocouples (TFTCs) on the heater surface measured the surface temperature, while a thin layer of sapphire or fused silica provided electrical insulation between the TFTCs and the ITO. The TFTCs were micro-fabricated using the liftoff process to deposit the nickel and copper metal films. The TFTC elements were 50 microns wide and overlapped to …

Design And Experimental Study Of An Integrated Vapor Chamber -" Thermal Energy Storage System, Krishna Kota

Electronic Theses and Dissertations

Future defense, aerospace and automotive technologies involve electronic systems that release high pulsed waste heat like during high power microwave and laser diode applications in tactical and combat aircraft, and electrical and electronic systems in hybrid electric vehicles, which will require the development of an efficient thermal management system. A key design issue is the need for fast charging so as not to overheat the key components. The goal of this work is to study the fabrication and technology implementation feasibility of a novel high energy storage, high heat flux passive heat sink. Key focus is to verify by theory …

Thermal Modeling And Laser Beam Shaping For Microvias Drilling In High Density Packaging, Chong Zhang

Electronic Theses and Dissertations

Laser drilling of microvias for organic packaging applications is studied in present research. Thermal model is essential to understand the laser-materials interactions and to control laser drilling of blind micro holes through polymeric dielectrics in multilayer electronic substrates. In order to understand the profile of the drilling front irradiated with different laser beam profiles, a transient heat conduction model including vaporization parameters is constructed. The absorption length in the dielectric is also considered in this model. Therefore, the volumetric heating source criteria are applied in the model and the equations are solved analytically. The microvia drilling speed, temperature distribution in …

Meshless Hemodynamics Modeling And Evolutionary Shape Optimization Of Bypass Grafts Anastomoses, Zaher El Zahab

Electronic Theses and Dissertations

Objectives: The main objective of the current dissertation is to establish a formal shape optimization procedure for a given bypass grafts end-to-side distal anastomosis (ETSDA). The motivation behind this dissertation is that most of the previous ETSDA shape optimization research activities cited in the literature relied on direct optimization approaches that do not guaranty accurate optimization results. Three different ETSDA models are considered herein: The conventional, the Miller cuff, and the hood models. Materials and Methods: The ETSDA shape optimization is driven by three computational objects: a localized collocation meshless method (LCMM) solver, an automated geometry pre-processor, and a genetic-algorithm-based …

An Improved Thermoregulatory Model For Cooling Garment Applications With Transient Metabolic Rates, Johan Westin

Electronic Theses and Dissertations

Current state-of-the-art thermoregulatory models do not predict body temperatures with the accuracies that are required for the development of automatic cooling control in liquid cooling garment (LCG) systems. Automatic cooling control would be beneficial in a variety of space, aviation, military, and industrial environments for optimizing cooling efficiency, for making LCGs as portable and practical as possible, for alleviating the individual from manual cooling control, and for improving thermal comfort and cognitive performance. In this study, we adopt the Fiala thermoregulatory model, which has previously demonstrated state-of-the-art predictive abilities in air environments, for use in LCG environments. We validate the …

Pressure Losses Experienced By Liquid Flow Through Pdms Microchannels With Abrupt Area Changes, Jonathan Wehking

Electronic Theses and Dissertations

Given the surmounting disagreement amongst researchers in the area of liquid flow behavior at the microscale for the past thirty years, this work presents a fundamental approach to analyzing the pressure losses experienced by the laminar flow of water (Re = 7 to Re = 130) through both rectangular straight duct microchannels (of widths ranging from 50 to 130 micrometers), and microchannels with sudden expansions and contractions (with area ratios ranging from 0.4 to 1.0) all with a constant depth of 104 micrometers. The simplified Bernoulli equations for uniform, steady, incompressible, internal duct flow were used to compare flow through …

User-Defined Patterning Of Neural Progenitor Cells On 3d Micropillar Arrays Using Round Cross-Sectional Geometry, Specific Dimen, Andrea Wesser

Electronic Theses and Dissertations

The ability to control stem cell functions, particularly neuronal progenitors, has long since been believed to be the key to successful treatment of neurodegenerative disorders such as Alzheimer's, Parkinson's and accidents involving head trauma. The neurology field calls for many new solutions to address the controlled neural stem cell seeding and placement of cells for neural tissue regeneration. Self-assembled monolayers (SAM) from the alkanethiol group provide a straightforward applicable, reliable treatment for cell adhesion. An ODT/gold treatment was used to adhere the cells to patterned areas, due mainly to a high confluence of cells attracted to it, as well as …

A Customer Programmable Microfluidic System, Miao Liu

Electronic Theses and Dissertations

Microfluidics is both a science and a technology offering great and perhaps even revolutionary capabilities to impact the society in the future. However, due to the scaling effects there are unknown phenomena and technology barriers about fluidics in microchannel, material properties in microscale and interactions with fluids are still missing. A systematic investigation has been performed aiming to develop "A Customer Programmable Microfluidic System". This innovative Polydimethylsiloxane (PDMS)-based microfluidic system provides a bio-compatible platform for bio-analysis systems such as Lab-on-a-chip, micro-total-analysis system and biosensors as well as the applications such as micromirrors. The system consists of an array of microfluidic …

Effect Of Pressure Gradient And Wake On Endwall Film Cooling Effectiveness, Sylvette Rodriguez

Electronic Theses and Dissertations

Endwall film cooling is a necessity in modern gas turbines for safe and reliable operation. Performance of endwall film cooling is strongly influenced by the hot gas flow field, among other factors. For example, aerodynamic design determines secondary flow vortices such as passage vortices and corner vortices in the endwall region. Moreover blockage presented by the leading edge of the airfoil subjects the incoming flow to a stagnating pressure gradient leading to roll-up of the approaching boundary layer and horseshoe vortices. In addition, for a number of heavy frame power generation gas turbines that use cannular combustors, the hot and …

Low Reynolds Number Water Flow Characteristics Through Rectangular Micro Diffusers/Nozzles With A Primary Focus On Major/Minor P, Kyle Hallenbeck

Electronic Theses and Dissertations

The field of microfluidics has recently been gathering a lot of attention due to the enormous demand for devices that work in the micro scale. The problem facing many researchers and designers is the uncertainty in using macro scaled theory, as it seems in some situations they are incorrect. The general idea of this work was to decide whether or not the flow through micro diffusers and nozzles follow the same trends seen in macro scale theory. Four testing wafers were fabricated using PDMS soft lithography including 38 diffuser/nozzle channels a piece. Each nozzle and diffuser consisted of a throat …

Improved Duct Systems Task Report With Stagegate 2 Analysis, Florida Solar Energy Center, Neil Moyer

FSEC Energy Research Center®

The Building America Industrialized Housing Partnership's work with two industry partners, Cavalier Homes and Southern Energy Homes, in constructing and evaluating prototype interior duct systems will be summarized. Issues of energy performance, comfort, DAPIA approval, manufacturability and cost will be addressed. A stage gate 2 analysis will address the current status of project showing that there are still refinements needed to the process of incorporating all of the ducts within the air and thermal boundaries of the envelope.

Orange County Convention Center Energy Analysis And Energy Information System, Florida Solar Energy Center, Charles Withers, Jr.

FSEC Energy Research Center®

The Orange County Convention Center (OCCC) has the 2nd largest convention facility utilization in the nation. Two primary buildings provide about seven million square feet of conditioned space to approximately 1.5 million visitors per year. In efforts to reduce energy conservation, OCCC began implementing several energy conservation measures beginning in 2005 and continuing over the last 2 years with plans to continue additional efforts in the future. An analysis of monthly chilled water and electricity used by the West and North/South Buildings has been completed in an effort to investigate reductions in energy use resulting from conservation measures. This final …

Commissioning High Performance Residences In Hot, Humid Climates, Florida Solar Energy Center, Ken Fonorow

FSEC Energy Research Center®

Since 2001, the authors have engaged several builders in the Gainesville, FL area to build over 500 high performance new energy efficient homes in multiple sub divisions. The builders keep building to increased levels of energy efficiency. Each home is individually designed, inspected, rated and commissioned for optimum performance. This paper summarizes the experiences to date with two production builders who have cost shared with the Building America program to deliver these outstanding results. Keys to success are commitment from the final decision maker; scopes of work for subcontractors with specific performance criteria; clear communication with the trades often accompanied …

Closing The Gap: Getting Full Performance From Residential Central Air Conditioners. Task 4.2-Develop New Climate-Sensitive Air Conditioner, Design, Construction, And Testing, Florida Solar Energy Center, Don B. Shirey Iii

FSEC Energy Research Center®

This study evaluated the performance of a prototype air conditioning system. The configuration of the prototype was based on detailed simulation results performed as part of this study. The results of the previously completed simulation indicated that energy-efficient, properly-ventilated homes in humid climates need equipment options or configurations that can provide a modest amount of additional dehumidification capacity while coordinating their operation with conventional cooling and ventilation systems. A prototype air conditioning system was constructed using currently available components and provides a method to independently control sensible (temperature) and latent (moisture) building loads. The prototype system was tested in both …

Review Of Chilled Water And Electric Energy Use At The West And North/South Buildings Of The Orange County Convention Center, Florida Solar Energy Center, Charles Withers, Jr.

FSEC Energy Research Center®

The Orange County Convention Center (OCCC) has the 2nd largest convention facility utilization in the nation. Two primary buildings provide about seven million square feet of conditioned space to one million visitors per year. In efforts to reduce energy conservation, OCCC began implementing several energy conservation measures beginning in 2005 and continuing over the last 2 years with plans to continue additional efforts in the future. Examples of the types of energy conservation involved changing lighting and HVAC schedules and control methods, replacement of motors with higher efficiency, and turning off power to other unused equipment. An analysis of monthly …

Airflow Network Modeling In Energyplus, Florida Solar Energy Center, Lixing Gu

FSEC Energy Research Center®

The airflow network model in EnergyPlus provides the ability to simulate multizone wind-driven airflows. The model is also able to simulate the impacts of forced air distribution systems, including supply and return air leaks. The air distribution system portion of the model is currently applicable for constant-air-volume systems. Future enhancements will include adding hybrid ventilation control and possible extension to include variable-air-volume distribution systems.

This paper describes the input objects, calculation procedures, model validation, and example results. The model inputs consist of five main objects: simulation control, multizone data, node data, component data, and linkage data. The model calculates pressure …

A Simplified Hot Water Distribution System Model, Florida Solar Energy Center, Lixing Gu

FSEC Energy Research Center®

Water heating in the U.S. has been identified as a major component of total energy consumption used in buildings, mostly coming from the residential sector at around 11%. A potential opportunity for energy savings in water heating systems is to improve the design of hot water distribution systems (HWDS). Due to the complex heat losses of HWDS, models are needed to optimize HWDS by reducing heat losses. There are three models currently used to simulate thermal performance of hot water distribution systems (HWDS): HWSim, ORNL-HWDS, and TRNSYS. The first two models are used to study hot water distribution systems only …

Solar 2007: Florida's Emergency Shelters Go Solar, Florida Solar Energy Center, William Young

FSEC Energy Research Center®

Florida has its fair share of dangerous weather conditions including hurricanes, tornados and floods. Florida Legislature passed various laws and made revisions addressing disaster planning which required that the Department of Education, in consultation with school boards and county and state emergency management offices, develop design standards for public shelters to be incorporated into State Requirements for Educational Facilities.

Last year, Solar for Schools, a state program, provided funds to put photovoltaic systems on schools that are classified as shelters, adding a new dimension to the educational program. Middleton High School is an example of an application to power the …

Ucf Recommissioning Project Final Report, Florida Solar Energy Center, James Cummings

FSEC Energy Research Center®

A research project was carried out to examine the energy savings which occurred from recommissioning three University of Central Florida buildings. Recommissioning activities completed in two of the three buildings yielded chilled water and whole building electricity savings on the order of 15% to 30%. Recommissioning implementation is pending in the third building, where savings are projected to be in the range of 40% to 50% of total building energy use. Additionally, cooling energy savings were monitored (and calculated) for a green roof installation at one of these three buildings. Calculated savings were found to be 1.05 kWh/day for a …