Mechanical Engineering Commons^™

The Anisotropic Hyperelastic Biomechanical Response Of The Vocal Ligament And Implications For Frequency Regulation: A Case Study, Jordan E. Kelleher, Thomas Siegmund, Mindy Du, Elhum Naseri, Roger W. Chan

School of Mechanical Engineering Faculty Publications

No abstract provided.

Laser Assisted Milling Of Difficult To Machine Materials, Gary Kent Hedberg

Open Access Theses

Titanium alloys are well known for their excellent strength to weight ratio and corrosion resistance and is highly sought after in the aerospace industry. Additionally, titanium alloys maintain a high biocompatibility for implants and other medical devices. However, these alloys are notorious for their poor machinability. As the demand for these alloys continue to increase, improved methods of manufacture must be explored. ^ This thesis describes Laser Assisted Milling (LAML) of Ti-6AL-4V (Ti-64) alloys, which studies localized preheating of the workpiece by a laser and characterizes the improvements to the machinability of these metals. Laser parameters are determined based on …

Cold Climate Field Test Analysis Of An Air-Source Heat Pump With Two-Stage Compression And Economizing, Stephen Lance Caskey

Open Access Theses

A Department of Defense project was established to conduct a field demonstration led by Purdue University with several industry partners. The technology investigated was an air-source, two-stage heat pump with closed-loop economizing. The field demonstration site was a military barracks on a National Guard base, Camp Atterbury, in southern Indiana. Two heat pumps were built at the Ray W. Herrick Laboratories and installed into two almost identical, barracks buildings. Data on the heat pump operation and building conditions were to be collected over an entire heating season. Due to complications with the system, the amount of runtime data collected from …

Age-Related Changes To The Production Of Linguistic Prosody, Daniel Richard Barnes

Open Access Theses

The production of speech prosody (the rhythm, pausing, and intonation associated with natural speech) is critical to effective communication. The current study investigated the impact of age-related changes to physiology and cognition in relation to the production of two types of linguistic prosody: lexical stress and the disambiguation of syntactically ambiguous utterances. Analyses of the acoustic correlates of stress: speech intensity (or sound-pressure level; SPL), fundamental frequency (F0), key word/phrase duration, and pause duration revealed that both young and older adults effectively use these acoustic features to signal linguistic prosody, although the relative weighting of cues differed by group. Differences …

Autonomous Orientation And Geolocation Via Celestial Objects, Cheng Liu

Open Access Theses

Based on a hemispherical sensor geometry, a novel celestial navigation system is developed to use celestial objects to determine the absolute location and orientation information without the aid of satellites via two different approaches.

The first approach employs a hemispherical arrangement of light intensity sensors to determine the vector to the dominant light source. We present the sensing system to measure the sun vector via least squares method and achieve the application of a low-cost, small-sized solar compass. The system is shown to work well under ideal conditions but is susceptible to noise and uncertainties in some situations.

The second …

Adaptive Nonlinear Control For Autonomous Ground Vehicles, William Spencer Black

Open Access Theses

We present the background and motivation for ground vehicle autonomy, and focus on uses for space-exploration. Using a simple design example of an autonomous ground vehicle we derive the equations of motion. After providing the mathematical background for nonlinear systems and control we present two common methods for exactly linearizing nonlinear systems, feedback linearization and backstepping. We use these in combination with three adaptive control methods: model reference adaptive control, adaptive sliding mode control, and extremum-seeking model reference adaptive control. We show the performances of each combination through several simulation results. We then consider disturbances in the system, and design …

A Study Of Inkjet Printed Line Morphology Using Volatile Ink With Non-Zero Receding Contact Angle For Conductive Trace Fabrication, Chenchao Shou

Open Access Theses

Inkjet printed lines on a homogeneous solid substrate are studied under the condition that ink evaporation is not negligible and the contact angle exhibits hysteresis with non-zero receding contact angle (NRCA). A new family of line instability is discovered, featured by formation of agglomerations within a line. The agglomeration is explained by a hydrodynamic flow that consistently drives a bead on the substrate towards fresh deposited droplets due to concentration-induced surface tension gradient. Morphologies of lines printed with multiple layers are also explored for the purpose of conductive trace fabrication. A non-uniform morphology is observed across a multi-layer line when …

Operational Modal Analysis And Force Characterization Of An Unstable Liquid Rocket Engine, Kevin Charles Buechele

Open Access Theses

Combustion instability has plagued the rocket industry since its beginnings. It is characterized by sustained pressure oscillations in the combustion chamber due to the coupling of natural pressure fluctuations with unsteady heat release. Typically, combustion instabilities are identified and mitigated during ground testing. Occasionally combustion instabilities do not present themselves until after a system is fielded and may only occur in a flight environment. While ground tests are heavily instrumented, operational flight data may not contain any direct measurement of the combustion forcing function. Post-event efforts to characterize anomalous combustion instabilities with existing instrumentation have had little success.

Accelerometers, which …

Performance-On-Demand Mems (Podmems): Electrical Control Of Effective Mass, Damping, And Stiffness, Shehrin Sayed

Open Access Theses

We propose the use of electrostatic force feedback to control the stiffness, damping, or mass of MEMS. If feedback forces are proportional to sensed displacement, velocity, or acceleration of a MEMS proof mass, then feedback can be used to increase or decrease the apparent stiffness, damping, and or mass of the MEMS. Such feedback can be used to compensate for process variations, packaging stress, thermal drift, viscous damping, etc. Prior efforts by others include position or velocity based feedback for modifying frequency, bandwidth, quality factor, or sensitivity of resonators. We present a means of quantitative control of stiffness, damping, and …

Strategy For Health Monitoring And Fault Detection In Heavy-Duty Diesel Engines, Aniketjayant Vagha

Open Access Theses

Performance tuning, health monitoring, fault diagnosis, etc. are important aspects of testing a pre-production engine out in the field. To fulfill these tasks, a robust data-based strategy for detecting anomalies in diesel engines is proposed in this work. Such a strategy separates the healthy data from outlying, anomalous trends of faulty data. The data classifier used here is based on fundamental principles of statistical learning and derived from linear discriminant analysis.

Further efforts to improve the classification performance led to the finding that steady state data makes for a more accurate classification of the working conditions of individual trucks. Hence …

Health Diagnosis Of Lithium-Ion Battery Cell Using Vibration-Based Test And Analysis, Huan Le Pham

Open Access Theses

With their superior advantages of high capacity and low percentage of self-discharge, lithium-ion batteries, which are most commonly used as power sources for hand-held electronic devices, have become the most popular choice for power storage in electric vehicles. Due to the increased potential for long life of lithium-ion batteries in vehicle applications, manufacturers are pursuing methodologies to increase the reliability of their batteries. Methods are now being developed to monitor the health of lithium-ion batteries throughout their life cycle. The work in this thesis is focused on utilizing non-destructive vibration diagnostic testing methods to monitor changes in the physical properties …

Modeling Of Legged Locomotion With A Suspended Load In The Sagittal Plane, Karna P. Potwar

Open Access Theses

Walking or running while carrying loads has always been a tedious task, more so when the loads are heavy. Such a task of carrying loads not only requires extra effort but also leads to physical pain and in some cases injury. Prior studies on human locomotion with a suspended load have used models that are restricted in their DOFs and so are not able to take into account the fore aft movement in human beings. The objective of this thesis is to model the dynamics of sagittal plane center-of-mass locomotion with a suspended load and apply findings to carrying loads …

Analysis Of An Actuated Two Segment Leg Model Of Locomotion, Nikhil Vinayak Rao

Open Access Theses

Research studies on dynamic models of legged locomotion have generally focused on telescoping-type leg models. Such telescoping spring loaded inverted pendulum (SLIP) models have been able to accurately predict observed center of mass (CoM) trajectories. There have been comparatively fewer studies on dynamics of locomotion

with segmented legs. Some earlier studies on the dynamics due to leg segmentation appear straightforward. For example, a simple model with the only joint moment being due to a passive springy knee has been shown to behave similarly to a telescoping spring-mass model. However, in real-life animal locomotion, there are multiple joint-moments acting at the …

Rotor Blade Operational Data Analysis Methods And Applications For Health Monitoring Of Wind Turbines Using Integrated Blade Sensing, Noah Jacob Myrent

Open Access Theses

Wind energy is one of the fastest growing sources of power production in the world today. In order to extract the maximum potential amount of energy from the wind, a wind turbine's reliability must be a top priority. As utility scale wind turbines increase in size and initial capital investment cost, there also comes an increasing need to monitor the health of the turbine. Currently, most wind turbines do not incorporate blade mounted inertial sensing in addition to blade strain measurements. This approach has the potential to detect inevitable blade damage types early on so that a maintenance schedule can …

Assessing The Engineering Performance Of Affordable Net-Zero Energy Housing, Jordan P. Wallpe

Purdue Polytechnic Masters Theses

The purpose of this research was to evaluate affordable technologies that are capable of providing attractive, cost-effective energy savings to the housing industry. The research did so by investigating the 2011 Solar Decathlon competition, with additional insight from the Purdue INhome. Insight from the Purdue INhome verified the importance of using a three step design process to design a net-zero energy building. In addition, energy consumption values of the INhome were used to compare and contrast different systems used in other houses.

Evaluation of unbiased competition contests gave a better understanding of how a house can realistically reach net-zero. Upon …

Improving Manufacturing Processes Through Energy Monitoring, Andrew Grzelak

Purdue Polytechnic Masters Theses

Energy efficiency and sustainability are very popular topics in the current field of manufacturing. With the increase in use of automation technology as well as the recent growth in the area of energy management, there is much focus on the overall improvement of manufacturing processes. For this research a project was completed to create a system that could improve both process efficiency as well as decrease energy consumption. By taking a look at the machine level energy consumption of an automated piece of manufacturing equipment, by eliminating waste in process, both energy efficiency and operational efficiency can be improved.

Using …

Acoustic Emission Detection Of Metals And Alloys During Machining Operations, Jameson K. Nelson

Purdue Polytechnic Masters Theses

Nelson, Jameson K. M.S., Purdue University, May 2012. Acoustic Emission Detection of Metals and Alloys During Machining Operations. Major Professor: Rodney G. Handy.

Practical correlation between material deformation attributes and theoretical concepts of machining has proven difficult to attain. The purpose of this study was to further explore trends and relationships using acoustic emission detection of materials undergoing single-point lathe turning machine processes. The majority of machining experiments that incorporate acoustic emissions focuses on tool degradation for the purposes of optimizing consumables required to manufacture mechanical devices. Experiments were implemented varying recording location, mechanical barrier condition, and machine parameters. The …

Evaluating Net-Zero Energy Houses From The U.S. Department Of Energy Solar Decathlon 2011, Jordan P. Wallpe, William J. Hutzel, Gregory Lasker, Clark Cory

School of Engineering Technology Faculty Publications

The Solar Decathlon is a two year, international project where university students compete to design, build, and test energy-efficient, net-zero homes. By definition, net-zero energy houses annually produce as much electricity as they consume. The 2011 Solar Decathlon, held in Washington D.C., had 19 university teams from around the world.

Unfortunately, many past Solar Decathlon houses have traditionally been very costly. However, the 2011 Solar Decathlon was the first competition to have an affordability contest. The affordability contest required each home to be valued under an estimated builder’s cost of $250,000, forcing the teams to select economically feasible solutions for …

Resolving Structure And Mechanical Properties At The Nanoscale Of Viruses With Frequency Modulation Atomic Force Microscopy, David Martinez-Martin, Carolina Carrasco, Mercedes Hernando-Pérez, P. J. De Pablo, Júlio Gómez-Herrero, Rebeca Pérez, Mauricio Garcia Mateu, José López Carrascosa, Daniel Roy Kiracofe, John C. Melcher, Arvind Raman

School of Mechanical Engineering Faculty Publications

Structural Biology (SB) techniques are particularly successful in solving virus structures. Taking advantage of the symmetries, a heavy averaging on the data of a large number of specimens, results in an accurate determination of the structure of the sample. However, these techniques do not provide true single molecule information of viruses in physiological conditions. To answer many fundamental questions about the quickly expanding physical virology it is important to develop techniques with the capability to reach nanometer scale resolution on both structure and physical properties of individual molecules in physiological conditions. Atomic force microscopy (AFM) fulfills these requirements providing images …

Automating The Fret Slotting Process Using A Plc Controlled 1.5 Axis Mill, James Stratton

Purdue Polytechnic Masters Theses

Stratton, James A. M.S., Purdue University, August 2011. Automating the Fret Slotting Process Using a PLC Controlled 1.5 Axis CNC Mill. Major Professor: Richard Mark French.

Can automation assist small job shops and hobbyists in the production of stringed instruments? This research set out to answer the question using a quantitative approach to determine if an economical CNC machine could be produced in such a fashion as to seamlessly join the workshop as an affordable, yet precise instrument to aid in the production of stringed instruments. The key was to incorporate common industrial automation equipment into the operation of the …

Stereoscopic Vision's Impact On Spatial Ability Testing, George Takahashi

Purdue Polytechnic Masters Theses

A look into spatial ability testing tools and the variations that past researchers made to focus on key factors that affect test scores, will demonstrate the need for tuning traditional testing methods to accommodate a wider demographic and provide more accurate results. Due to technological limitations of the time, a large variety of past spatial tests were developed by hand-drawings. Within this research, the addition of stereoscopic vision is analyzed to determine the value of said changes on human perception of spatial entities.

A Digital Hydraulic Valve, Actuated Using A Piezoelectric Linear Motor, Brian C. Bevill

Purdue Polytechnic Directed Projects

Proportional control in hydraulics is widely utilized. The most widely used current types of proportional valves utilize solenoid technology. While this technology has been around for decades and has been proven an effective means of control, there is always a demand for improved performance of advancing technologies. Integrating piezoelectric devices as a means to control hydraulic systems helps advance control for hydraulic systems.

Piezoelectric stack devices have been used to control hydraulic systems with success. Advantages of these stacks include being relatively small with a high power to weight ratio, using less energy than solenoid operations, and being fast acting. …

Virtual Prototyping Of A Mechatronics Device, Ryne P. Mchugh

Purdue Polytechnic Directed Projects

Mechanical, electrical, and embedded software engineering are being combined in modern products. This combination has come to be known as mechatronics. The high level of multidisciplinary interaction makes it difficult for collaboration and use of computers in Mechatronics’ design.

Dassault Systems’ SolidWorks and National Instruments’ LabVIEW are industrial grade softwares that can be used in the development and deployment phase of engineering design. SolidWorks is used for physical modeling and analysis of geometric parts, while LabVIEW is used as a programming language for control logic and data acquisition. National Instruments has developed a module, known as SoftMotion, which allows communication …

Quantifying Multiple Types Of Damping Acting On Bronze-Wound Guitar Strings, Jonathan Christian

Purdue Polytechnic Masters Theses

The goal of this study was to quantify the contributions of multiple damping types acting on guitar strings for each mode over a wide frequency range so that design variables could be identified to one day create frequency based damping in guitar strings. Structural dynamic testing was used to obtain the time-response of a vibrating string in open air and in a vacuum. From this signal, each harmonic was filtered and the decay envelope was curve-fitted with a function that was a linear summation of decay functions. From the curve-fits, the damping coefficients for aerodynamic, friction, and material damping were …

Control System For Mass Spectrometer, Jian Xu

Purdue Polytechnic Masters Theses

Mass spectrometry (MS) is a very popular analytical methodology that measures the mass of ions using a mass spectrometer. It is widely used for determining masses of chemicals, the elemental composition of a sample and molecule structure. The process of mass spectrometry normally consists of ionizing chemical compounds to ions and measuring their ratios of mass to charge for analysis.

MS instruments consist of three modules: Ionization, Analysis and detection. A LabVIEW system was developed to control the three modules of a mass spectrometer, giving the required signals in a right sequence. Experiments can be carried out by using the …

How Much Do U.S. University Students Know, And Want To Know, About Sustainability And Green Building? The Findings Of A Survey, And Possible Implications For General Elective Curricula., Jeremy R. Farner

Purdue Polytechnic Masters Theses

Using the survey approach, this investigation examined the attitudes and interest of college students at two universities in different geographic locations within the United States.  Approximately 24,000 students from all disciplines and majors at Weber State University (WSU) in Utah, and 4,000 at Purdue University in Indiana, were invited to participate in a study to determine current knowledge, familiarity, and interest in topics within the sustainability and Green Building educational arena. The goal of this study was to determine what students already know, would like to know, and how much interest there would be in developing …

Mechatronics Application To Solar Tracking, Danny L. Rodriguez Jr

Purdue Polytechnic Directed Projects

The purpose of this was to design and implement a two-axis solar tracking system utilizing the National Instruments C-Rio real time controller. In order to accomplish this a prototype was modeled in CAD. This prototype used two 12 V DC motors to change a solar panel's rotation and tilt based on feedback data from three cadmium sulfide photoresistors. This configuration was chosen for its ability to create both a left-right rotational and an up/down tilt differential. In Addition this approach uses National Instruments Labview to control a solar tracking system. Using Labview add uniqueness to this project by adding a …

Estimating The Yield Strength Of Thin Metal Films Through Elastic-Plastic Buckling-Induced Debonding, S Goyal, K Srinivasan, G Subbarayan, Thomas Siegmund

School of Mechanical Engineering Faculty Publications

In this paper, we propose a procedure to estimate the yield strength of thin films by debonding films from their substrate by elastic-plastic buckling under thermally-induced compressive loading. The out-of-plane displacement of the metal lines under conditions of elastic-plastic buckling is dependent on the yield strength of the film. Thus, an inverse estimate of the yield strength is made from measurements of the out-of-plane displacements of the buckled metal lines. The procedure is demonstrated to estimate the yield strength of aluminum lines consistent with measurements by other techniques.

Comparative Analysis Of A Low-Speed Wind Tunnel Designed For Renewable Energy Applications, Craig A. Zehrung

Purdue Polytechnic Masters Theses

This thesis describes the design, testing, and validation of an open-circuit, mid-sized wind tunnel used for the teaching of undergraduate courses and testing of green energy wind turbines. This thesis uses computational fluid dynamics to determine theoretical values for flow of the wind tunnel which were statistically compared to actual values of fluid flow. An overall analysis of efficiency and effectiveness were also performed. However, aerodynamic testing of actual prototype turbines will not be covered in this thesis, as it does not concern the tunnels adherence to theoretical flow values.

Toward A Zero Energy Home: Applying Swiss Building Practices/Attitudes To U.S. Residential Construction, Daphene C. Koch, William Hutzel, Jason M. Kutch, Eric A. Holt

School of Engineering Technology Faculty Publications

This project evaluated typical U.S. and Swiss homes to identify construction practices that are most energy efficient and have economic payback. A net zero energy home (ZEH) produces as much energy as is consumed in it over time. Students in a College o f Technology in a Midwest Indiana State University and a technical University in Switzerland resulted in developing models of homes that combined U.S. and Swiss standards. The project was completed in two phases: during the first phase o f this project, construction costs, energy use, and economic payback was calculated for six homes that were designed using …