Mechanical Engineering Commons^™

Reaction Tuning Of Selectively Deposited Nano-Thermite Inks For Thrust And Heat Deposition, Raghav Ramachandran

Open Access Theses

Currently there is very little systematic work that quantifies the performance of energetic materials in terms of thrust or heat deposition applied to electronic circuits. A better understanding of the interactions between nano-scale energetic materials and electronic systems, as a function of stoichiometry is needed for enhanced defeat. Both of these needs are addressed in this research. Formulations of Al-CuO and Al-Bi2O3 nano-thermites were prepared at different equivalence ratios and selectively deposited onto silicon substrates and thrust and heat deposition of these materials was quantified. Both nano-thermite systems produced maximum thrust near stoichiometric ratios, and more fuel-rich mixtures led to …

Liquid Metal Particle Popping: Nanoscale To Macroscale, Trevor R. Lear

Open Access Theses

Liquid metal nanoparticles can be used to produce stretchable electronic devices. Understanding the mechanical properties of liquid metal nanoparticles is crucial to optimizing their use in various applications, especially printing of flexible, stretchable electronics. Smaller nanoparticles are desired for high-resolution printing and compatibility with existing scalable manufacturing methods; however, they contain less liquid metal and are more difficult to rupture than larger particles, making them less desirable for post-processing functionality. This study investigates the mechanics of liquid metal particle rupture as a function of particle size. We employ compression of particle films to characterize the composition of the particle core …

Investigation Of Thin Film Thermal Transport Using Micro-Raman Thermometry And Tip Enhanced Raman Spectroscopy, Mithun Srinivasan

Open Access Theses

In recent years, a steady increase in the need for packing more energy in smaller devices had driven the need for better understanding of thermal transport in thin films and designing methods to manipulate them. This can be attributed as the reason for numerous efforts made in the past decade to achieve temperature resolution at nanoscale. Such techniques can help us in understanding the thermal conductivity of thin films which can result in an improved performance of these devices. The temperature probing technique must be non-invasive to avoid damaging the vulnerable thin films, fast to study the energy transport and …

Analysis Of Composite Plates By Using Mechanics Of Structure Genome And Comparison With Ansys, Banghua Zhao

Open Access Theses

Motivated by a recently discovered concept, Structure Genome (SG) which is defined as the smallest mathematical building block of a structure, a new approach named Mechanics of Structure Genome (MSG) to model and analyze composite plates is introduced. MSG is implemented in a general-purpose code named SwiftComp™, which provides the constitutive models needed in structural analysis by homogenization and pointwise local fields by dehomogenization. To improve the user friendliness of SwiftComp™, a simple graphic user interface (GUI) based on ANSYS Mechanical APDL platform, called ANSYS-SwiftComp GUI is developed, which provides a convenient way to create some common SG models or …

Free Edge Stress Analysis Of Laminated Structures With Arbitrary Cross Sections Using Mechanics Of Structure Genome, Lingxuan Zhou

Open Access Theses

Composite laminates have been increasingly used in advanced structural applications, due to their excellent strength-to-weight properties and considerable flexibility on designing with respect to the laminate layup. However, the heterogeneity and anisotropy of composite laminates have brought many challenges for analysis and numerous researches have been devoted in this field. A well known problem which has been studied intensively is the so-called free-edge problem. It states that due to the mismatch in elastic properties of adjacent layers, full-scale three-dimensional (3D) and highly concentrated stress fields will occur in the vicinity of the free edges. The interlaminar stresses grow very rapidly …

Thermomechanical Properties Of Novel Lanthanum Zirconate Based Thermal Barrier Coatings - An Integrated Experimental And Modeling Study, Xingye Guo

Open Access Dissertations

Thermal barrier coatings (TBCs) are refractory materials deposited on gas turbine components, which provide thermal protection for metallic components at operating conditions. The current state-of-art TBC material is yttria-stabilized zirconia (YSZ), whose service temperature is limited to 1200 celsius, due to sintering and phase transition at higher temperatures. In comparison, lanthanum zirconate (La2Zr2O7, LZ) has become a promising candidate material for TBCs due to its lower thermal conductivity and higher phase stability compared to YSZ.

The primary objective of this thesis is to design a novel robust LZ-based TBC system suitable for applications beyond 1200 celsius. Due to LZ’s low …

Modeling Methods For Merging Computational And Experimental Aerodynamic Pressure Data, Jacob Courtney Haderlie

Open Access Dissertations

This research describes a process to model surface pressure data sets as a function of wing geometry from computational and wind tunnel sources and then merge them into a single predicted value. The described merging process will enable engineers to integrate these data sets with the goal of utilizing the advantages of each data source while overcoming the limitations of both; this provides a single, combined data set to support analysis and design. The main challenge with this process is accurately representing each data source everywhere on the wing. Additionally, this effort demonstrates methods to model wind tunnel pressure data …

Carbon Nanotube Thermal Interfaces And Related Applications, Stephen L. Hodson

Open Access Dissertations

The development of thermal interface materials (TIMs) is necessitated by the temperature drop across interfacing materials arising from macro and microscopic irregularities of their surfaces that constricts heat through small contact regions as well as mismatches in their thermal properties. Similar to other types of TIMs, CNT TIMs alleviate the thermal resistance across the interface by thermally bridging two materials together with cylindrical, high-aspect ratio, and nominally vertical conducting elements. Within the community of TIM engineers, the vision driving the development of CNT TIMs was born from measurements that revealed impressively high thermal conductivities of individual CNTs. This vision was …

Concurrent Detection And Isolation Of Cellular And Molecular Biomarkers, Wanfeng Huang

Open Access Dissertations

Detection of cancer markers such as protein biomolecules and cancer cells in bodily fluids is of great importance in early diagnosis, prognosis as well as evaluation of therapy efficacy. Numerous devices have been developed for detecting either cellular or molecular targets, however there has not yet been a system that can simultaneously detect both cellular and molecular targets effectively. Molecule and cell-based assays are important because each type of target can tell a different story about the state of the disease and the two types of information can potentially be combined and/or compared for more accurate biological or clinical assessments. …

A Method For Selecting Hvac Retrofit Solutions For Existing Small- And Medium-Sized Commercial Buildings, Bonggil Jeon

Open Access Dissertations

The primary purpose of the present study is to develop a framework and methodology for evaluating appropriate Heating, Ventilating, and Air Conditioning (HVAC) retrofit solutions that can be effectively retrofitted into different types of small- and medium-sized commercial buildings (SMSCB). Additionally, development of an advanced data-driven decision-making tool is introduced as a benefit of proposed framework. In recent years, considerable attention has been focused on retrofits of existing commercial buildings (IBE, 2013b). In fact, the Commercial Building Energy Consumption Survey (CBECS) 2003 (EIA, 2006) indicates that over 70% of existing commercial buildings across the United States are more than twenty …

Optimal Design Of Sound Absorbing Systems With Microperforated Panels, Nicholas Nakjoo Kim

Open Access Dissertations

As the development of technology makes economic prosperity and life more convenient, people now desire a higher quality of life. This quality of life is based not only on the convenience in their life but also on clean and eco-friendly environments. To meet that requirement, much research is being performed in many areas of eco-friendly technology, such as renewable energy, biodegradable content, and batteries for electronic vehicles.

This tendency is also obvious in the acoustics area, where there are continuing attempts to replace fiber-glass sound absorbers with fiber-free materials. The combination of microperfoated panels (MPP) (one of the fiber-free sound …

Evaluating The Performance Of Passive Chilled Beams With Respect To Energy Efficiency And Thermal Comfort, Janghyun Kim

Open Access Dissertations

Existing modeling approaches for passive chilled beams determined from tests on individual chilled beams in a laboratory are not adequate for assessing overall energy usage and occupant comfort within building simulation programs. In addition, design guidelines for passive chilled beam systems are needed for identifying appropriate applications and optimal configurations. This thesis includes (i) extensive experimental studies for characterizing the performance of passive chilled beams, in both laboratory settings and in field studies, (ii) development of passive chilled beam performance prediction models, (iii) integration of these models into building simulation models/tools and (iv) use of building simulation for overall assessment …

Modifying Burning Rate And Agglomeration Size In Aluminized Composite Solid Propellants Using Mechanically Activated Metals, Hatem Mohamed Belal

Open Access Dissertations

Agglomeration reduction techniques are important field in solid propellant industry, Large agglomeration results in excessive two phase losses. Tailored composite particles has been applied to tailor aluminum particle ignition and combustion. In this research, mechanical activated aluminum magnesium powders are synthesized, tested in both laser ignition using CO2 and propellant. Prepared powders categorized into particle size that suitable for propellant application. Laser ignition tests showed that the prepared powder are more reactive than magnalium which has the same Al:Mg weight ratio. Agglomeration capturing showed that the prepared powder produce much less than neat aluminum or even similar physical mixture of …

Energy Localization And Heat Generation In Composite Energetic Systems Under High-Frequency Mechanical Excitation, Jesus O. Mares

Open Access Dissertations

In this work, the ability to use high frequency mechanical excitation to generate significant heating within plastic bonded explosives, as well as single energetic particles embedded within a viscoelastic binder, is studied. In this work, the fundamental mechanisms associated with the conversion of high-frequency mechanical excitation to heat as applied to these composite energetic systems are thoroughly investigated.

High-frequency contact excitation has been used to generate a significant amount of heat within samples of PBX 9501 and representative inert mock materials. Surface temperature rises on the order of 10 °C were observed at certain frequencies over a range from 50 …

Hydrodynamics Of Swimming Microorganisms In Complex Fluids, Gaojin Li

Open Access Dissertations

Swimming motion of microorganisms, such as spermatozoa, plankton, algae and bacteria, etc., ubiquitously occurs in nature. It affects many biological processes, including reproduction, infection and the marine life ecosystem. The hydrodynamic effects are important in microorganism swimming, their nutrient uptake, fertilization, collective motions and formation of colonies. In nature, microorganisms have evolved to use various fascinating ways for locomotion and transport. Different designs are also developed for the locomotion of artificial nano- and microswimmers. In this study, we use several different computational models to investigate the behavior of microswimmers.

Microorganisms typically swim in the low Reynolds number regime, where inertia …

Experimentally Validated 3d Md Model For Afm-Based Tip-Based Nanomanufacturing, Rapeepan Promyoo

Open Access Dissertations

In order to control AFM-based TBN to produce precise nano-geometry efficiently, there is a need to conduct a more focused study of the effects of different parameters, such as feed, speed, and depth of cut on the process performance and outcome. This is achieved by experimentally validating a MD simulation model of nanomachining, and using it to conduct parametric studies to guide AFM-based TBN. A 3D MD model with a larger domain size was developed and used to gain a unique insight into the nanoindentation and nanoscratching processes such as the effect of tip speed (e.g. effect of tip speed …

Fracture Analysis In Biomimetic Bouligand Architectures, Nobphadon Suksanqpanya

Open Access Dissertations

The Bouligand structure, which is found in many biological materials, is a hierarchical architecture that features uniaxial fiber layers assembled periodically into a helicoidal pattern. Many studies have highlighted the high damage-resistant performance of Bouligand structures and its biomimetic materials. One of the outstanding species with the Bouligand structures is the smashing Mantis Shrimp, Odontodactylus Scyllarus, (or stomatopod) due to its capability of generating high speed, high acceleration blows using its raptorial appendage to defeat highly armored preys. The load-bearing part of this appendage, the dactyl club, contains an interior region, which is mainly characterized by the Bouligand structure. This …

Fundamental Studies Of Flame Propagation In Lean-Burn Natural Gas Engines, Zhiyan Wang

Open Access Dissertations

Lean-burn natural gas engines offer enhanced thermal efficiencies and reduced soot and NOx emissions. However, cycle-to-cycle variability in combustion that can result from unreliable ignition, variability in equivalence ratio and quenching is a challenge. Reliability of ignition can be improved by employing a dual-fuel ignition strategy in which a small quantity of diesel fuel is injected to initiate ignition. Computational studies of n-heptane/methane-air mixing layers are performed to provide insight into the fundamental physics of dual-fuel ignition. The results show that the characteristic time required for steady premixed flame propagation has three components: time for autoignition to occur, time for …

On The Use Of Mechanical And Acoustical Excitations For Selective Heat Generation In Polymer-Bonded Energetic Materials, Daniel C. Woods

Open Access Dissertations

To address security issues in both military and civilian settings, there is a pressing need for improved explosives detection technologies suitable for trace vapor detection. In light of the strong dependence of vapor pressure on temperature, trace vapor detection capabilities may be enhanced by selectively heating target materials by external excitation. Moreover, polymer-bonded energetic materials may be particularly susceptible to heating by mechanical or acoustical excitation, due to the high levels of damping and low thermal conductivities of most polymers. In this work, the thermomechanical response of polymer-based energetic composites and methods for acoustical excitation are investigated in order to …

Photoelectrochemical And Photophysical Studies Of Carbon Nanotube And Molybdenum Disulfide Based Light Harvesting Devices, Hanyu Zhang

Open Access Dissertations

There is a critical need in utilizing solar radiation as a renewable energy source. While photovoltaic solar cells are widely used, much attention has been devoted in the past decade to developing nanotechnology for potential cost reduction and improved device efficiency and reliability. Low-dimensional materials offer unique physical properties which may be exploited for solar energy harvesting and conversion. Understanding their fundamental properties and developing relevant manufacturing strategies will thus pave the road toward high-performance, cost-effective, light-harvesting devices.

This thesis has investigated single-wall carbon nanotubes (SWCNTs) and molybdenum disulfide (MoS2) nanolayers for their light-harvesting ability in donor-acceptor systems. These materials …

Novel Closed-Loop Control Strategy For Inkjet-Based Additive Manufacturing System, Yunong Shi, Chunsheng Ye

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Study On Criterion Of Fabricating Columnar Dendrite Structure Dz466 Superalloy Based On Lmc Process, Xun Sun

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

A Coupled Finite Element-Free Galerkin Method For Simulating Viscous Pressure Bulging, Chunjun Dai

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Study On The Impact Abrasive Wear Of New Super-High Manganese Steel, Wenyan Wang

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Simulation Of Superplastic Forming Of Circular Edge-Welded Envelopes, Olga Tulupova

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Numerical Simulation On The Combustion Characteristic Of Iron Ore Sintering With Flue Gas Recirculation, Gan Wang, Zhi Wen, Guofeng Lou, Ruifeng Dou, Xunliang Liu, Fuyong Su, Sizong Zhang

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

A Parallel 3d Phase-Field Simulation Of Multi-Grain Growth Based On The Full Thread Tree, Ya-Jun Yin, Min Wang, Jian-Xin Zhou, Dun-Ming Liao, Xu Shen, Tao Chen

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Study On Criterion Of Fabricating Columnar Dendrite Structure Dz466 Superalloy Based On Lmc Process, Xun Sun, Guoyan Shui, Yang Guan, Guiqiao Su, Bo Yu, Lou Yanchun

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Study On Mechanical Properties Of Silicone Rubber Materials Used As Gaskets In Pem Fuel Cell Environment, Guo Li

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Simulation Investigation Of Temperature Distribution In Large Aluminium Panel During Autoclave Age Forming Process, Yongqian Xu

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.