Mechanical Engineering Commons^™

Reduced Order Description Of Experimental Two-Phase Pipe Flows: Characterization Of Flow Structures And Dynamics Via Proper Orthogonal Decomposition, Bianca Fontanin Viggiano

Dissertations and Theses

Multiphase pipe flow is investigated using proper orthogonal decomposition for tomographic X-ray data, where holdup, cross-sectional phase distributions and phase interface characteristics within the pipe are obtained. Six cases of stratified and mixed flow with water content of 10%, 30% and 80% are investigated to gain insight into effects of velocity and proportion of water on the flow fields. Dispersed and slug flows are separately analyzed to consider the added interface complexity of the flow fields. These regimes are also highly applicable to industry operational flows. Instantaneous and fluctuating phase fractions of the four flow regime are analyzed and reduced …

A Functional Subnetwork Approach To Designing Synthetic Nervous Systems That Control Legged Robot Locomotion, Nicholas Szczecinski, Alexander J. Hunt, Roger Quinn

Mechanical and Materials Engineering Faculty Publications and Presentations

A dynamical model of an animal’s nervous system, or synthetic nervous system (SNS), is a potentially transformational control method. Due to increasingly detailed data on the connectivity and dynamics of both mammalian and insect nervous systems, controlling a legged robot with an SNS is largely a problem of parameter tuning. Our approach to this problem is to design functional subnetworks that perform specific operations, and then assemble them into larger models of the nervous system. In this paper, we present networks that perform addition, subtraction, multiplication, division, differentiation, and integration of incoming signals. Parameters are set within each subnetwork to …

Passive Bottom Reflection-Loss Estimation Using Ship Noise And A Vertical Line Array, Lanfranco Muzi, Martin Siderius, Christopher M. Verlinden

Electrical and Computer Engineering Faculty Publications and Presentations

An existing technique for passive bottom-loss estimation from natural marine surface noise (generated by waves and wind) is adapted to use noise generated by ships. The original approach—based on beamforming of the noise field recorded by a vertical line array of hydrophones—is retained; however, additional processing is needed in order for the field generated by a passing ship to show features that are similar to those of the natural surface-noise field. A necessary requisite is that the ship position, relative to the array, varies over as wide a range of steering angles as possible, ideally passing directly over the array …

Conditional Averaging And Classification In The Near Wake Of A Wind Turbine Array Boundary Layer, Sarah E. Smith

Maseeh Summer Undergraduate Research Experience

Flow perturbation induced by interaction with a turbine rotor produces considerable turbulence which can alter the productivity of subsequent units within a wind farm. Previous methods have characterized near wake vorticity of a single turbine as well as recovery distance for various turbine array configurations. This study aims to build from previous methods of analysis from the perspective of the rotor well within a turbine array and develop a model to examine points of significant imposition in relation to rotational effects. Hot wire anemometry was employed downstream of a turbine located in the middle of the third row in a …

Flux Focusing Axial Magnetic Gear, Robert J. Rutherford

Maseeh Summer Undergraduate Research Experience

Power transmission is traditionally achieved with a mechanical gear. These gears require maintenance, cause vibration, and have no overload protection. Magnetic gears (MGs) offer an innovative solution to these drawbacks as they do not require regular maintenance, have no need for lubrication, create very little acoustic noise, have built in overload protection and as a result of these advantages, have a longer lifetime of operation. The flux focusing axial magnetic gear (FFAMG) was assembled for future testing of power transmission, conversion, and generation applications.

Gears are used to transmit power by converting low speed-high torque rotary motion into high speed-low …

Deposition Velocity Dependence On Urban Morphology, Rawand Muzafar Rasheed

Maseeh Summer Undergraduate Research Experience

Understanding the interactions between the atmospheric boundary layer and urban structures provides insights into emerging problems such as green building design as well as dispersion and deposition of pollutants on urban structures. Characterization of deposition velocity dependence through the naphthalene sublimation method on model urban structures is conducted herein where the analogous fundamental transport mechanisms of momentum and mass transport is obtained via mass of naphthalene transferred. Via wind tunnel experiments, results show that deposition velocity of naphthalene from urban structures increases with increased number of urban structures ahead of the point of investigation. This is attributed to the wakes …

The Aerodynamic Effects On Flight Patterns And The Evolutionary Changes In Pterosaurs, Johnathan D. Talik

Maseeh Summer Undergraduate Research Experience

Early pterosaurs were the first vertebrates to achieve powered flight, and remained small-to-medium sized from the Triassic Period to the end of the Jurassic Period. During that interval, lasting from 210 million years ago to 66 million years ago, pterosaurs underwent a notable changes at the end of the Jurassic Period and through the Cretaceous Period. They were abruptly replaced by much larger forms, characterized by great size and peculiar head ornamentation, among other unique and notable morphological features. While many different explanations theorize why and how the features of the pterosaurs changed over the Cretaceous Period, the aerodynamic influences …

Turbulent Boundary Layer Features Via Lagrangian Coherent Structures, Proper Orthogonal Decomposition And Dynamic Mode Decomposition, Naseem Ali, Murat Tutkun, Raul Bayoan Cal

Mechanical and Materials Engineering Faculty Publications and Presentations

High-speed stereo PIV-measurements have been performed in a turbulent boundary layer at Reθ of 9800 in order to elucidate the coherent structures. Snapshot proper orthogonal decomposition (POD) and dynamic mode decomposition (DMD) are used to visualize the flow structure depending on the turbulent kinetic energy and frequency content. The first six POD and DMD modes show the largest and the lowest amount of energy and frequency, respectively. Lagrangian coherent structure (LCS) based on the algorithm developed using the variational theory is also applied to track the flow via attracting and repelling trajectories. The shapes and the length of the trajectories …

The Effectiveness Of Sanitary Inspections As A Risk Assessment Tool For Thermotolerant Coliform Bacteria Contamination Of Rural Drinking Water: A Review Of Data From West Bengal, India, Christian Snoad, Corey L. Nagel, Animesh Bhattacharya, Evan A. Thomas

Mechanical and Materials Engineering Faculty Publications and Presentations

The use of sanitary inspections combined with periodic water quality testing has been recommended in some cases as screening tools for fecal contamination. We conducted sanitary inspections and tested for thermotolerant coliforms (TTCs), a fecal indicator bacteria, among 7,317 unique water sources in West Bengal, India. Our results indicate that the sanitary inspection score has poor ability to identify TTC-contaminated sources. Among deep and shallow hand pumps, the area under curve (AUC) for prediction of TTC > 0 was 0.58 (95% confidence interval [CI] = 0.53–0.61) and 0.58 (95% CI = 0.54–0.62), respectively, indicating that the sanitary inspection score was only …

Development And Training Of A Neural Controller For Hind Leg Walking In A Dog Robot, Alexander J. Hunt, Nicholas Szczecinski, Roger Quinn

Mechanical and Materials Engineering Faculty Publications and Presentations

Animals dynamically adapt to varying terrain and small perturbations with remarkable ease. These adaptations arise from complex interactions between the environment and biomechanical and neural components of the animal’s body and nervous system. Research into mammalian locomotion has resulted in several neural and neuro-mechanical models, some of which have been tested in simulation, but few “synthetic nervous systems” have been implemented in physical hardware models of animal systems. One reason is that the implementation into a physical system is not straightforward. For example, it is difficult to make robotic actuators and sensors that model those in the animal. Therefore, even …

Reversible Control Of The Magnetization Of Fe₃O₄ Via Lithium Ions, Guodong Wei, Lin Wei, Dong Wang, Yufeng Tian, Yanxue Chen, Shishen Yan, Liangmo Mei, Jun Jiao

Mechanical and Materials Engineering Faculty Publications and Presentations

In this report, a reversible control of Fe₃O₄ saturated magnetization by Li ions is demonstrated. A miniature Li ion battery (LIB) was assembled using a Fe₃O₄ nanoparticle layer as the active cathode. A stable magnetism modulation is realized by a nondestructive electrochemical process in which the lithium insertion results in a valence change and partial redistribution of Fe cations in the crystal structure. The relation between the discharge voltage and the chemical phases were studied by ex situ X-ray diffraction and magnetic measurement. In a suitable discharge potential range, a reversible control of Fe₃O₄ saturated magnetization was obtained without structural …

Fifty-Plus-Year Postflight Analysis Of First Fluid Experiment Aboard A Spacecraft, Mark M. Weislogel, Yongkang Chen, William J. Masica, Fred J. Kohl, Robert D. Green

Mechanical and Materials Engineering Faculty Publications and Presentations

This year marks the 55th anniversary of the first fluid physics experiment performed aboard a spacecraft during the Mercury-Atlas 7 mission. Since then, NASA has conducted over 80 fluids physics experiments aboard a variety of spacecraft, many of which have enhanced the understanding of large-length-scale capillary phenomena relevant to liquid management in the weightless state. As both celebration and demonstration, the Mercury-Atlas 7 fluids experiment is revisited in light of the current understanding of large-length-scale capillary fluidics. Employing a modern numerical tool, a rich variety of experimental outcomes are discovered that were not observed during the flight experiment. Interestingly, experimental …

Reversible Control Of The Magnetization Of Spinel Ferrites Based Electrodes By Lithium-Ion Migration, Guodong Wei, Lin Wei, Dong Wang, Yanxue Chen, Yufeng Tian, Shishen Yan, Liangmo Mei, Jun Jiao

Mechanical and Materials Engineering Faculty Publications and Presentations

Lithium-ion (Li-ion) batteries based on spinel transition-metal oxide electrodes have exhibited excellent electrochemical performance. The reversible intercalation/deintercalation of Li-ions in spinel materials enables not only energy storage but also nondestructive control of the electrodes’ physical properties. This feature will beneft the fabrication of novel Li-ion controlled electronic devices. In this work, reversible control of ferromagnetism was realized by the guided motion of Li-ions in MnFe₂O₄ and γ-Fe₂O₃ utilizing miniature lithium-battery devices. The in-situ characterization of magnetization during the Li-ion intercalation/deintercalation process was conducted, and a reversible variation of saturation magnetization over 10% was observed …

Anisotropic Character Of Low-Order Turbulent Flow Descriptions Through The Proper Orthogonal Decomposition, Nicholas Hamilton, Murat Tutkun, Raúl Bayoán Cal

Mechanical and Materials Engineering Faculty Publications and Presentations

Proper orthogonal decomposition (POD) is applied to distinct data sets in order to characterize the propagation of error arising from basis truncation in the description of turbulence. Experimental data from stereo particle image velocimetry measurements in a wind turbine array and direct numerical simulation data from a fully developed channel flow are used to illustrate dependence of the anisotropy tensor invariants as a function of POD modes used in low-order descriptions. In all cases, ensembles of snapshots illuminate a variety of anisotropic states of turbulence. In the near wake of a model wind turbine, the turbulence field reflects the periodic …

Development Of 3d Accelerometer Testing System, Mohammed Abbas Soudai Alsaedi

Dissertations and Theses

Accelerometers are used in numerous industries including aircrafts and missile navigations systems, rotary machines, and electronic devices such as tablets, cell phones, and cameras. Accelerometers of different purposes and specifications are being produced in large quantities. The large demand for accelerometers forces the need for accelerometer testing methodology that is more convenient and accurate. Inertial Micro-Electromechanical Systems Accelerometer (MEMS) require a series of tests that include physical stimuli. One of the key challenges is the cost associated with testing. Therefore, the accurate prediction of the sensor functions not only reduces the testing time but also more importantly contributes to reducing …

Investigating Co2 Removal By Ca- And Mg-Based Sorbents With Application To Indoor Air Treatment, Elliott T. Gall, Cem Sonat, William W. Nazaroff, Cise Unluer

Mechanical and Materials Engineering Faculty Publications and Presentations

Indoor carbon dioxide (CO 2 ) levels serve as an indicator of ventilation sufficiency in relation to metabolic effluents. Recent evidence suggests that elevated CO 2 exposure (with or without other bioeffluents) may cause adverse cognitive effects. In shelter-in-place (SIP) facilities, indoor CO 2 levels may become particularly elevated. This study evaluates four low-cost alkaline earth metal oxides and hydroxides as CO 2 sorbents for potential use in indoor air cleaning applications. Sorbents studied were MgO, Mg(OH) 2 , Ca(OH) 2 and commercially available soda lime. Uncarbonated sorbents characterized with nitrogen adsorption porosimetry showed BET surface areas in the 5.6–27 …

Focused-Based Multifractal Analysis Of The Wake In A Wind Turbine Array Utilizing Proper Orthogonal Decomposition, Naseem Ali, Hawwa Falih Kadum, Raúl Bayoán Cal

Mechanical and Materials Engineering Faculty Publications and Presentations

Hot-wire anemometry measurements have been performed in a 3×3 wind turbine array to study the multifractality of the turbulent kinetic energy dissipation. A multifractal spectrum and Hurst exponents are determined at nine locations downstream of the hub height, bottom and top tips. Higher multifractality is found at 0.5D and 1D downstream of the bottom tip and hub height. The second order of the Hurst exponent and combination factor shows the ability to predict the flow state in terms of its development. Snapshot proper orthogonal decomposition (POD) is used to identify the coherent and incoherent structures and to reconstruct the stochastic …

Investigation Of Jet Dynamics In Cross-Flow: Quantifying Volcanic Plume Behavior, Graham Freedland

Dissertations and Theses

Volcanic eruption columns inject high concentrations of ash into the atmosphere. Some of this ash is carried downwind forming ash clouds in the atmosphere that are hazardous for private and commercial aviation. Current models rely on inputs such as plume height, duration, eruption rate, and meteorological wind fields. Eruption rate is estimated from plume height using relations that depend on the rate of air entrainment into the plume, which is not well quantified. A wind tunnel experiment has been designed to investigate these models by injecting a vertical air jet into a cross-flow. The ratio of the cross-flow and jet …

Bioaerosol Deposition On An Air-Conditioning Cooling Coil, Yan Wu, Ailu Chen, Irvan Luhung, Elliott T. Gall, Qingliang Cao, Victor Wei-Chung Chang, William W. Nazaroff

Mechanical and Materials Engineering Faculty Publications and Presentations

This study is concerned with the role of a fin-and-tube heat exchanger in modifying microbial indoor air quality. Specifically, depositional losses of ambient bioaerosols and particles onto dry (not cooled) and wet (cool) coil surfaces were measured for different airspeeds passing through the test coil. Total, bacterial and fungal DNA concentrations in condensate water produced by a wet coil were also quantified by means of fluorescent dsDNA-binding dye and qPCR assays. Results revealed that the deposition of bioaerosols and total particles is substantial on coil surfaces, especially when wet and cool. The average deposition fraction was 0.14 for total DNA, …

Distribution Of Mean Kinetic Energy Around An Isolated Wind Turbine And A Characteristic Wind Turbine Of A Very Large Wind Farm, Gerard Cortina, Marc Calaf, Raul Bayoan Cal

Mechanical and Materials Engineering Faculty Publications and Presentations

An isolated wind turbine and a very large wind farm are introduced into large-eddy simulations of an atmospheric boundary layer. The atmospheric flow is forced with a constant geostrophic wind and a time-varying surface temperature extracted from a selected period of the CASES-99 field experiment. A control volume approach is used to directly compare the transfer of mean kinetic energy around a characteristic wind turbine throughout a diurnal cycle considering both scenarios. For the very large wind farm case, results illustrate that the recovery of mean kinetic energy around a wind turbine is dominated by the vertical flux, regardless of …

Effect Of Fiber Material On Ozone Removal And Carbonyl Production From Carpets, Omed A. Abbass, David J. Sailor, Elliott T. Gall

Mechanical and Materials Engineering Faculty Publications and Presentations

Indoor air quality is affected by indoor materials such as carpets that may act as sources and/or sinks of gas-phase air pollutants. Heterogeneous reactions of ozone with carpets may result in potentially harmful products. In this study, indoor residential carpets of varying fiber types were tested to evaluate their ability to remove ozone, and to assess their role in the production of carbonyls when exposed to elevated levels of ozone. Tests were conducted with six types of new unused carpets. Two sets of experiments were conducted, the first measured ozone removal and ozone deposition velocities, and the second measured primary …

Inverse Structure Functions In The Canonical Wind Turbine Array Boundary Layer, Bianca Viggiano, Moira Gion, Naseem Ali, Murat Tutkun, Raúl Bayoán Cal

Mechanical and Materials Engineering Faculty Publications and Presentations

Wind tunnel measurements for a 3×3 canonical wind turbine array boundary layer are obtained using hot-wire anemometer velocity signals. Two downstream locations are considered, referring to the near- and far-wake, and 21 vertical points are acquired per profile. Velocity increments and exit distances are used to quantify inverse structure functions at both downstream locations. Inverse structure functions in the near-wake show a similar profile for the main vertical locations, but diverge as the moment is increased. In the far-wake, inverse structure functions converge toward a single function for all vertical location and moments. The scaling exponents for inverse structure functions …

Assessing Latrine Use In Rural India: A Cross-Sectional Study Comparing Reported Use And Passive Latrine Use Monitors, Antara Sinha, Corey L. Nagel, Evan A. Thomas, Wolf P. Schmidt, Belen Torondel, Sophie Boisson, Thomas Clasen

Mechanical and Materials Engineering Faculty Publications and Presentations

Although large-scale programs, like India's Total Sanitation Campaign (TSC), have improved latrine coverage in rural settings, evidence suggests that actual use is suboptimal. However, the reliability of methods to assess latrine use is uncertain. We assessed the reliability of reported use, the standard method, by comparing survey-based responses against passive latrine use monitors (PLUMs) through a cross-sectional study among 292 households in 25 villages in rural Odisha, India, which recently received individual household latrines under the TSC. PLUMs were installed for 2 weeks and householders responded to surveys about their latrine use behavior. Reported use was compared with PLUM results …

Minimum Conditions For Visible Mold Growth, G. A. Tsongas, Frank Riordan

Mechanical and Materials Engineering Faculty Publications and Presentations

Considerable confusion and misunderstanding exists over the conditions required for visible mold growth at a surface in buildings. That is evident in papers and articles authored by engineers and other scientists, including various ASHRAE, ASTM and Canada Mortgage Housing Corporation publications. One of the major problems is that many HVAC engineers, building scientists, practitioners and others believe there exists a single critical value of the relative humidity (RH) of the indoor or ambient air well away from surfaces, below which mold will not grow on surfaces. However, that is not the case. The purpose of this article is to clarify …

Frequency Based Noise Coherence-Function Extension And Application To Passive Bottom-Loss Estimation, Lanfranco Muzi, Martin Siderius, Peter L. Nielsen

Electrical and Computer Engineering Faculty Publications and Presentations

Accurate modeling of acoustic propagation in the ocean waveguide is important to SONAR-performance prediction. Particularly in shallow waters, a crucial contribution to the total transmission loss is the bottom refection loss, which can be estimated passively by beamforming the natural surface-noise acoustic field recorded by a vertical line array of hydrophones. However, the performance in this task of arrays below 2 m of length is problematic for frequencies below 10 kHz" role="presentation" style="display: inline; line-height: normal; word-spacing: normal; word-wrap: normal; white-space: nowrap; float: none; direction: ltr; max-width: none; max-height: none; min-width: 0px; min-height: 0px; border: 0px; padding: 0px 2px 0px …

High-Performance Self-Powered Photodetectors Based On Zno/Zns Core-Shell Nanorod Arrays, Hailing Lin, Lin Wei, Cuncun Wu, Yanxue Chen, Shishen Yan, Liangmo Mei, Jun Jiao

Mechanical and Materials Engineering Faculty Publications and Presentations

In recent years, there is an urgent demand for high-performance ultraviolet photodetectors with high photosensitivity, fast responsivity, and excellent spectral selectivity. In this letter, we report a self-powered photoelectrochemical cell-type UV detector using the ZnO/ZnS core-shell nanorod array as the active photoanode and deionized water as the electrolyte. This photodetector demonstrates an excellent spectral selectivity and a rapid photoresponse time of about 0.04 s. And the maximum responsivity is more than 0.056 (A/W) at 340 nm, which shows an improvement of 180 % compared to detectors based on the bare ZnO nanorods. This improved photoresponsivity can be understood from the …

Wake Character In The Wind Turbine Array: (Dis-)Organization, Spatial And Dynamic Evolution And Low-Dimensional Modeling, Nicholas Michael Hamilton

Dissertations and Theses

To maximize the effectiveness of the rapidly increasing capacity of installed wind energy resources, new models must be developed that are capable of more nuanced control of each wind turbine so that each device is more responsive to inflow events. Models used to plan wind turbine arrays and control behavior of devices within the farm currently make questionable estimates of the incoming atmospheric flow and update turbine configurations infrequently. As a result, wind turbines often operate at diminished capacities, especially in arrays where wind turbine wakes interact and inflow conditions are far from ideal. New turbine control and wake prediction …

Large Length Scale Capillary Fluidics: From Jumping Bubbles To Drinking In Space, Andrew Paul Wollman

Dissertations and Theses

In orbit, finding the "bottom" of your coffee cup is a non-trivial task. Subtle forces often masked by gravity influence the containment and transport of fluids aboard spacecraft, often in surprising non-intuitive ways. Terrestrial experience with capillary forces is typically relegated to the micro-scale, but engineering community exposure to large length scale capillary fluidics critical to spacecraft fluid management design is low indeed. Low-cost drop towers and fast-to-flight International Space Station (ISS) experiments are increasing designer exposure to this fresh field of study. This work first provides a wide variety of drop tower tests that demonstrate fundamental and applied capillary …

Dynamic Stall Of An Experimental Wind Turbine Blade, Matthew Scott Melius, Raúl Bayoán Cal, Karen Mulleners

Mechanical and Materials Engineering Faculty Publications and Presentations

To understand the complex flow phenomena over wind turbine blades during stall development, a scaled three-dimensional non-rotating blade model is designed to be dynamically similar to a rotating full-scale NREL 5 MW wind turbine blade. A time-resolved particle imagevelocimetry(PIV) investigation of flowbehavior during the stall cycle examines the processes of stall development and flow reattachment. Proper orthogonal decomposition (POD) and vortex detection techniques are applied to the PIV fields to quantify relevant flow characteristics such as vortex size, separation angle, and separation point throughout a dynamic pitching cycle. The behavior of the POD coefficients provides time scales for the transitional …

Semiconductor Film Grown On A Circular Substrate: Predictive Modeling Of Lattice-Misfit Stresses, Ephraim Suhir, Johann Nicolics, G. Khatibi, M. Lederer

Mechanical and Materials Engineering Faculty Publications and Presentations

effective and physically meaningful analytical predictive model is developed for the evaluation the lattice-misfit stresses (LMS) in a semiconductor film grown on a circular substrate (wafer). The two-dimensional (plane-stress) theory-of-elasticity approximation (TEA) is employed in the analysis. The addressed stresses include the interfacial shearing stress, responsible for the occurrence and growth of dislocations, as well as for possible delaminations and the cohesive strength of a buffering material, if any. Normal radial and circumferential (tangential) stresses acting in the film cross-sections and responsible for its short- and long-term strength (fracture toughness) are also addressed. The analysis is geared to the GaN …