Mechanical Engineering Commons^™

Support For A Delivery Train Based Material Handling Mechanism, Sai P. Boyedapu

Electrical & Computer Engineering Theses & Dissertations

Modeling a delivery train system is more challenging than traditional forklift systems as the delivery train model consists of a tugger, cart and a controller that combine to deliver materials within a manufacturing plant. Also, the decision logic for selection of carts and tuggers, joining of loads to particular delivery trains is more complicated than forklift systems. Simulation software such as Arena, Automod and Flexsim do not provide direct support for modeling delivery train systems.

In this thesis, an object-oriented, platform and language independent model of a delivery train was designed. The model was then implemented as an extension to …

Design And Fabrication Of A Prototype Fabry-Perot Cavity For The Compton Polarimeter Upgrade At Jefferson Lab, Deepa Deepa

Mechanical & Aerospace Engineering Theses & Dissertations

Upcoming experiments at Hall A at Jefferson lab require 1 % absolute accuracy of the electron beam polarization measurement at 0.85 Ge V energy. The Compton polarimeter at Hall A is capable of measuring beam polarization with 3 - 4 % accuracies at this beam energy. Hence it was proposed to upgrade the present Compton by doubling the laser frequency [2]. The present Compton polarimeter operates with a 1064 nm, continuous wave laser at 200 mW. This power is enhanced to 1.5 kW using a 0.85 m long Fabry-Perot Cavity. Changing to 532 nm laser with the same power would …

Investigation And Applications Of Latin Hypercube Sampling Methods, Prashant K. Patel

Mechanical & Aerospace Engineering Theses & Dissertations

The Latin hypercube sampling method, sometimes called the stratified sampling method, is a commonly used variance reduction method. Recently, the optimal Latin hypercube sampling method (OLH) and the modified optimal Latin hypercube sampling method (MOLH) are introduced in the literature, which use the genetic algorithm to adjust the distance between sampled points.

This paper will compare the basic Latin hypercube, the optimal Latin hypercube and the modified optimal Latin hypercube methods for generating the sample points for statistical application and curve fitting, in te1ms of accuracy and efficiency. Analytical and structural examples are used in this thesis to facilitate the …

Rapid Prototyping For The Design Of Virtual Worlds, Prabhu V. Krishnan

Electrical & Computer Engineering Theses & Dissertations

Development of Virtual Reality (VR) applications is challenging where application developers are required to have expertise in the target VR technologies along with the problem domain expertise. New VR technologies impose a significant learning curve to even the most experienced VR developer. The proposed solution relies on synthesis to automate the migration of a VR application to a new unfamiliar VR platform/technology. To solve the problem, the Common Scene Definition Framework (CSDF) was developed, that serves as a superset/model representation of the target virtual world. Input modules were developed to populate the framework with the capabilities of the virtual world …

Static And Modal Analysis Of The Magnetic Levitation Vehicle, Santosh Kumar Desetty

Mechanical & Aerospace Engineering Theses & Dissertations

The magnetic levitation train project at Old Dominion University has been stalled due to many technical problems. The control system is the main component of the vehicle, which is supposed to maintain an intended gap of 1 cm between the vehicle and the track while traveling, hence providing a smooth ride. The goal of the project is to document the mathematics of the complete system so that the control algorithm can be implemented and modified with the expectation of obtaining an improved levitation and propulsion.

The complete system includes the vehicle, the track, and the concrete guide-way. The focus of …

Modeling Multilevel Supply Chain Systems To Optimize Order Quantities And Order Points Through Mathematical Models, Discrete Event Simulation And Physical Simulations, Alok K. Verma

Mechanical & Aerospace Engineering Theses & Dissertations

Managing supply chains in today's distributed manufacturing environment has become more complex. To remain competitive in today's global marketplace, organizations must streamline their supply chains. The practice of coordinating the design, procurement, flow of goods, services, information and finances, from raw material flows to parts supplier to manufacturer to distributor to retailer and finally to consumer requires synchronized planning and execution. Efficient and effective supply chain management assists an organization in getting the right goods and services to the place needed at the right time, in the proper quantity and at acceptable cost. Managing this process involves developing and overseeing …

Nonlinear Flutter Of Curved Panels Under Yawed Supersonic Flow Using Finite Elements, Mohamed Salim Azzouz

Mechanical & Aerospace Engineering Theses & Dissertations

In the extensive published literature on panel flutter, a large number of papers are dedicated to investigation of flat plates in the supersonic flow regime. Very few authors have extended their work to flutter of curved panels. The curved geometry generates a pre-flutter behavior, triggering a static deflection due to a static aerodynamic load (SAL) over the panel as well as dynamic characteristics unique to this geometry. The purpose of this dissertation is to provide new insights in the subject of flutter of curved panels. Finite element frequency and time domain methods are developed to predict the pre/post flutter responses …

Ridding Ships' Ballast Water Of Microorganisms, Fred C. Dobbs, Andrew Rogerson

OES Faculty Publications

( First paragraph) A complex assemblage of microorganisms exists in nearly every aquatic system on earth. In lakes and oceans, every milliliter of water contains about 10² protists (single-celled eukaryotes), 10⁶ bacteria, and 10⁷–10⁹ viruses. Therefore, billions of microorganisms inevitably enter ships’ ballast tanks during normal operations. It has been argued that microorganisms must certainly be frequent invaders of coastal ecosystems, given the high densities of bacteria and viruses in ballast water—10⁸ and 10⁹ organisms per liter, respectively (1)—their potentially high reproductive rates, broad tolerances to physical conditions, and ability to form resting …

Physical Simulations In Classroom As A Pedagogical Tool For Enhancing Manufacturing Instruction In Engineering Technology Programs, Alok K. Verma, Han P. Bao, Anand Ghadmode, Swanand Dhayagude

Engineering Technology Faculty Publications

Lean is a powerful philosophy that advocates minimization of waste within an organization. The adoption of Lean Manufacturing philosophy by major manufacturers has created a demand for qualified personnel in this area. Higher education is not far behind in incorporating this philosophy into their curriculum. A number of universities have started offering both graduate and undergraduate courses in Lean Manufacturing. Physical simulations are often an integral part of these courses. Simulation based Lean enterprise concepts have been introduced in an undergraduate course in mechanical engineering technology program at Old Dominion University. Results show increased student participation and better understanding of …

Indium Growth On Si(100)-2 X 1 By Femtosecond Pulsed Laser Deposition, M. A. Hafez, M. S. Hegazy, H. E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

Indium was grown on Si (100) -2×1 at room temperature by femtosecond pulsed laser deposition. Reflection high-energy electron diffraction (RHEED) was performed in situ to study film morphology and in-plane lattice spacing. Indium was found to grow on Si (100) -2×1 by the Stranski-Krastanov mode. The initial two-dimensional In layer formed in the In-2×1 structure with a lattice constant of 3.65 Å. The full-width at half-maximum (FWHM) of the specular peak decreased during the growth, indicating an increase of the In islands size. Further In growth on the initial In-2×1 layer showed the formation of hexagonal, elongated, and hemispherical islands …

P-Version Time-Discontinuous Galerkin's Method For Nonlinear Transient Heat Transfer Analysis And Sensitivity Analysis, Ta-Cheng Chien

Mechanical & Aerospace Engineering Theses & Dissertations

The finite element method is a powerful tool for approximating the solution of most engineering problems. Traditionally, the finite element method uses linear approximation of field variables over each element, where numerical results converge to the exact solution by increasing the number of elements. A newer finite element method called the p-version finite element method uses higher-order elements which assume a polynomial of order p for the approximation on each element. Here, the approximation will achieve accuracy without increasing the number of elements but by increasing the value of order p.

The focus of this research is on …

Modal Analysis And Validation Of A Gasoline Fuel Injector Using Ansys And Laser Vibrometer, Ravi Kiran Kothamasa

Mechanical & Aerospace Engineering Theses & Dissertations

In the present day market it has been demonstrated that quality and speed make a product successful. An automobile has hundreds of components, which work in synchronization to make the automobile run smoothly. The fuel injector is one of the key components of an automobile. The primary functions of a fuel injector are: to deliver measured quantity of fuel to the engine, to atomize fuel for efficient combustion process, to deliver measured or atomized quantity of fuel to the desired target within manifold/head, and to shut off the fuel supply when no fuel is required. When this fuel injector is …

Distal Placement Of An End-To-Side Bypass Graft Anastomosis A 3-D Computational Study, John Robert Di Cicco

Mechanical & Aerospace Engineering Theses & Dissertations

A three-dimensional computational fluid dynamics study of blood flow through stenotic arteries has been conducted. Flow phenomena, such as separation regions and turbulence, can be found distal to an arterial stenosis. Frequently, a bypass graft using an end-to-side technique is attached to a stenotic artery to restore adequate blood flow. However, a significant percentage of these grafts fail after thirty postoperative days due to intimal hyperplasia development around the distal anastomosis. Moreover, aberrant wall shear rates have been implicated as a factor in the development of intimal hyperplasia. Thus, the present study examines whether placement of the distal end of …

Effects Of Track Irregularities On Dynamic Responses Of A Moving Maglev Train, Aravind M. Hanasoge

Mechanical & Aerospace Engineering Theses & Dissertations

The Maglev project at Old Dominion University is a collaboration between Old Dominion, American Maglev Technology (AMT), Lockheed Martin, other industry participants and the federal and state governments. This project began at the Norfolk campus in 2002. Under this project, researchers are aiming for a demonstrable engineering prototype that will operate smoothly at speeds of 40 - 45 miles per hour along the 3400 feet long track.

During testing, the vehicle is found to vibrate violently when operated on the ground. Furthermore, the vehicle failed to levitate when operated on the elevated track. As part of the investigation to determine …

Effects Of Initial Seated Position On Whiplash In Low Speed Rear-End Impacts Comparison And Study Using The Tno Rear Impact Dummy (Trid) Model, Manjunath P. Venkataramana

Mechanical & Aerospace Engineering Theses & Dissertations

Despite numerous investigations devoted to its scrutiny, injury causing mechanism associated with rear-end impact collision producing injury such as Whiplash Associated Disorder (WAD) has remained a mystery. Several criteria have been proposed to predict the injury causing mechanism, but none have been universally accepted. The challenge lies in determining a set of testing procedures representative of real-world collisions, wherein the results obtained are not only the same as human testing, but remain consistent with various subjects and impact conditions. It is hypothesized that one of the most important considerations is the effect of initial seated position (ISP).

This thesis can …

An Algorithm For Locating Fundamental Frequency (F0) Markers In Speech, Princy Dikshit

Electrical & Computer Engineering Theses & Dissertations

Speech has been the principal form of human communication since it began to evolve at least one hundred thousand years ago. Speech is produced by vibrations of the vocal cords. The rate of vibration of the cords is called fundamental frequency (F0) or pitch. The objective of this thesis is to locate pitch period cycles on a cycle-by-cycle basis. The complexity in identifying pitch cycles stems from the highly irregular nature of human speech. Dynamic programming is used to combine two sources of information for pitch period marking. One source of information is the "local" information corresponding to the location …

Uncertainty Propagation And Robust Design In Cfd Using Sensitivity Derivatives, Michele M. Putko

Mechanical & Aerospace Engineering Theses & Dissertations

This study investigates and demonstrates a methodology for uncertainty propagation and robust design in Computational Fluid Dynamics (CFD). Efficient calculation of both first- and second-order sensitivity derivatives is requisite in the proposed methodology. In this study, first- and second-order sensitivity derivatives of code output with respect to code input are obtained through an efficient incremental iterative approach.

An approximate statistical moment method for uncertainty propagation is first demonstrated on a quasi one-dimensional (1-D) Euler CFD code. This method is then extended to a two-dimensional (2-D) subsonic inviscid model airfoil problem. In each application, given statistically independent, random, normally distributed input …

Field Effect Control Of Electrokinetic Transport Phenomena In Nanofluidics, Song Xue

Mechanical & Aerospace Engineering Theses & Dissertations

Naturally nanofluidics has applications demanding the samples to be handled in exceedingly small quantities due to the small size of the fluidic channels in nanofluidic devices, such as characterization of single biomolecules. Fluids confined in channels of nanometer characteristic dimensions exhibit physical behaviors not observed in large conduits. Charge properties of the nanochannel wall in contact with an aqueous solution play essential roles in the involved electrokinetic transport phenomena occurring in nanofluidic devices. In addition to tuning the charge properties of the nanofluidic channel wall by adjusting the solution properties such as pH and background salt concentration, field effect transistor …

Numerical Study Of Combustion Of Hydrogen And Ethylene In A Two-Dimensional Dual-Mode Scramjet Combustor, Robert A. Carson

Mechanical & Aerospace Engineering Theses & Dissertations

This thesis presents computational fluid dynamics results for two-dimensional flow geometries utilizing two fuels, hydrogen (H2) and ethylene (C2H4). Upstream interaction was evident with the use of both fuels due in part to recirculation in the combustor, the inlet pressures and the combustion process. Results were obtained for hydrogen using a reduced chemical kinetic model while results obtained for ethylene employed a reduced chemical kinetic model as well as an expanded chemical kinetic model.

Initially, an examination of grid composition was conducted in order to select the most numerically efficient and accurate grid for reacting flow in the current combustor …

Mapping Of Thermo-Fluids Laboratory Experiments Into Web-Based Experiments, Sushil Chaturvedi, Rick Mckenzie, O. A. Akan, A. Priyadershini

Mechanical & Aerospace Engineering Faculty Publications

A methodology is being developed for transforming physical experiments from the undergraduate thermo-fluids laboratory into a web-based virtual experiments. Important characteristics of physical experiments are identified in order to preserve them in physical to virtual domain mapping. Several commercially available software are employed to incorporate in the web-based experiments characteristics such as recreation of physical phenomenon in the virtual domain, measurement of physical quantities on a computer screen, assembly of virtual probes and coupling of the virtual experiment with a data acquisition software. A virtual reality software has been incorporated to enable web-based students to navigate through the virtual laboratory, …

Design Optimization Module For Hierarchical Research And Learning Environment, Oktay Baysal, Mehti Koklu, Ahmed K. Noor

Mechanical & Aerospace Engineering Faculty Publications

The present paper describes a learning module on design optimization courses within a hierarchical research and learning network (HRLN). In this environment a knowledge organization can be created as a hierarchical learning network to link diverse inter- and trans- disciplinary teams from a consortium of universities, industry, government agencies and the providers of learning technologies. It is an approach that builds on computer-based training, intelligent tutoring systems, interactive learning, collaborative-distributed learning, and learning networks. The present design optimization module has been developed and described herein, as a demonstrator of a learning module in this environment. This module allows for the …

Fantasy And The Concert Hall: Musical Performance In The Electroacoustic Age, Matthew Malsky

Reconstruction: Studies in Contemporary Culture

[First paragraph]

In 1941, the famously despondent Theodor Adorno worried about the detrimental effects of radio broadcast upon the symphony. He theorized that much of value was lost when listeners experienced an orchestral performance of a composition in symphonic form through its electronic transmission to their kitchens rather than in a concert hall. Based upon empirical research done in collaboration with Paul Lazarsfeld and the Princeton Radio Research Project, he argued that the presence of music was lost to the radio listener, and with it a part of music's auratic spell, its uniqueness in time and place, its ritual, cultish …

Computation Of Shock Induced Noise In Imperfectly Expanded Supersonic Jets, Bulent Imamoglu

Mechanical & Aerospace Engineering Theses & Dissertations

Screech noise exists only in imperfectly expanded jets. The exit pressure of imperfectly expanded jets does not match ambient pressure, so expansion or compression waves appear out of the nozzle and generate shock cell patterns. Screech is generated by the interaction of shock cells and instability waves. Many experiments and computations have been done to model screech noise, but it is not yet a very well known subject.

A numerical study is performed to understand screech generation mechanisms and to compare with latest experiments. A supersonic underexpanded jet of 25.4 mm diameter is modeled for cases of Mach numbers of …

Design And Analysis Of An Air Filter Sensor For A Residential Heating And Cooling System, Cheng Y. Lin, Steve C. Hsiung, Alok K. Verma, Gary R. Crossman

Engineering Technology Faculty Publications

This is a design project of an air-filter sensor to be used in home heating and cooling system. The project includes conceptual design, analysis, implementation, tests and modifications. First, the air quality and power consumption between a clean air filter and a dirty air filter is studied. Then, a photo sensor circuit with an ultra high brightness LED emitter and a phototransistor receiver is used to detect dust particles. A red warning LED lights up when a specified amount of dust is collected on the filter and blocks the light beam between the emitter and the receiver. The emitter and …

Analysis Of Human Thermal Comfort Using A Coupled Model For Predicting Human Body-Environment Heat And Mass Exchange, Ahmed M. Al-Mogbel

Mechanical & Aerospace Engineering Theses & Dissertations

Recent advances in computational fluid dynamics (CFD) make it possible to accurately predict many features of airflow within ventilated spaces. The present study investigates thermal comfort aspects of an occupant in a conditioned space, using a CFD code.

The heat and mass transfer between the human body and the surrounding environment is analyzed by a coupled model that accounts for dispersal of metabolically generated heat in the body to the surroundings by the combined mechanisms of radiation, convection, respiration and evaporation. A two-node model in which two coupled non-linear algebraic equations govern the skin temperature and the body core temperature …

Wind-Induced Exchange In Semi-Enclosed Basins, Rosario Sanay

OES Theses and Dissertations

The wind-induced circulation over laterally varying bathymetry was investigated in homogeneous and in stratified systems using the three-dimensional Regional Ocean Model (ROMS). For homogeneous systems, the focus was to describe the influence of the earth's rotation on the lateral distribution of the flow with particular emphasis on the transverse circulation. Along-basin wind-stress with no rotation caused a circulation dominated by an axially symmetric transverse structure consisting of downwind flow over the shoals and upwind flow in the channel along the whole domain. Transverse circulation was important only at the head of the system where the water sank and reversed direction …

Analytical Model Of A Thermomechanical Hot Channel Coupled To A Friction Stir Welding Process, Saptarshi Mandal

Mechanical & Aerospace Engineering Theses & Dissertations

Although fusion welding techniques are well established, recent developments in solid state joining techniques have produced high quality welds in materials that are difficult to fusion weld. Friction Stir Welding (FSW) was developed in 1991 as a robust solid-state joining technique that uses a specially shaped rotating tool to generate heat and plasticize material around the tool. The tool then mixes plasticized material along the joint line to produce the weld. Over the last decade, FSW has become increasingly popular for welding aluminum. The combination of attractive properties of the weld and cost-efficiency has led researchers to investigate the feasibility …

Optimization-Based Architecture For Managing Complex Integrated Product Development Projects, Hisham Mohamed El-Sayed Abdelsalam

Mechanical & Aerospace Engineering Theses & Dissertations

By the mid-1990's, the importance of early introduction of new products to both market share and profitability became fully understood. Thus, reducing product time-to-market became an essential requirement for continuous competition. Integrated Product Development (IPD) is a holistic approach that helps to overcome problems that arise in a complex product development project. IPD emphasis is to provide a framework for an effective planning and managing of engineering projects. Coupled with the fact that about 70% of the life cycle cost of a product is committed at early design phases, the motivation for developing and implementing more effective methodologies for managing …

Piezoelectric Sensor In The Application Of Rolling Bearing Health Monitoring, Yinyin Liu

Mechanical & Aerospace Engineering Theses & Dissertations

A condition-based monitoring concept for rolling element bearings in machinery utilizing a piezoelectric load sensor is investigated in this thesis. The radially polarized cylindrical piezoelectric sensor is modeled in its specific coordinates. The sensor registers the stress occurring in all directions around it. The sensor's behavior due to several typical loads is analyzed. Based on the induced stresses in the sensor, the sensor's output as an electric charge can be obtained using the method of integration.

Considering both the normal and tangential loads distributed on the rolling beating's roller-raceway contact surface, the dynamic stress distribution in the outer raceway was …

Diode Laser Crystallization Of Hydrogenated Amorphous Silicon Thin Films For Solar Cell Applications, Brian A. Eaton

Mechanical & Aerospace Engineering Theses & Dissertations

The research objectives were to prove the crystallization of hydrogenated amorphous silicon (a-Si:H) thin films using a diode laser operating at an 805 nm wavelength and to provide morphology trends in laser crystallized samples. This work was primarily intended for solar cell applications.

One industry goal was to produce a high-efficiency and low-cost solar cell capable of competing economically with other energy sources at large scale in the world market. Excimer laser crystallization was one very promising technique. However, two important problems still hindered economic competition. This research addressed the problems associated with excimer laser crystallization by utilizing a diode …