Mechanical Engineering Commons^™

Slm Materials Development, Justin G. Reiner, Michael T. Schembri

Industrial and Manufacturing Engineering

The purpose of this project was to create a procedure to efficiently determine a “recipe” of parameter values that create a desired set of mechanical properties. Research was conducted into the laser powder bed fusion process with focus on underdeveloped materials. A design of experiment was used with a set of density correlated parameters to establish a method of producing nearly dense parts. Our methods include SLM printing, metrology, and statistical analysis. An experimental procedure for materials development was designed, but unable to be validated during the scope of this project, due to unforeseen safety issues (exposure to Chromium 6, …

Mobile Opera Backdrop, Juan Villalobos, Robbie Behlman, Kevin Valencia

Mechanical Engineering

Opera San Luis Obispo requires an acoustically projecting stage backdrop for their future plan of deploying a mobile opera house. The custom stage backdrop must be low-cost, easy to assemble and must project the performance sound to outdoor audiences. Other design requirements include being transportable in a step van, the ability to be assembled quickly by a crew of two, resistance to various outdoor conditions, the ability to mount accessories from the walls, and should meet a budget of $5,000. With the scope of the project understood, the three-quarter project is outlined. During the first quarter, the main deliverables included …

Purple Urchin Removal, Cullen Goss, Wil Gilbreath, Kevin Marshall

Mechanical Engineering

Soaring purple urchin populations have contributed to a greater than 90% reduction of northern California’s bull kelp forests. Human intervention to reduce the purple urchin population may allow localized kelp patches to grow. The California Department of Fish and Wildlife requested that our team develop a mechanical device to aid in the removal of the urchins. This document provides an update from the scope of work and details the process conducted to reach a scale final design. In this document, we provide background research to show our understanding of urchins and their effect on kelp forests. Then, we analyze the …

Team Joseph's Bike Trailer, Keely Thompson, Curtis Wathne, Ryan Meinhardt

Mechanical Engineering

This final design report shows the results of this senior project’s design process of creating a custom bike trailer for Team Joseph. As done in the Scope of Work, Preliminary Design report, and Critical Design report, current products, relevant technologies, and American Society for Testing and Materials (ASTM) standards are fully researched and benchmarked to aid in the design selection process. Customer requirements are looked at and developed into engineering specifications. A detailed design was created for CDR to show to Team Joseph, and manufacturing and testing plans were laid out. This final design report adds the final design revisions …

Universal Studios Hollywood Vip Trolley - Roller Frame, Jeffrey Ploss, Chase Montague, Lincoln Treanor

Mechanical Engineering

Statement of Confidentiality: The complete senior project report was submitted to the project advisor and sponsor. The results of this project are of a confidential nature and will not be published at this time.

Multi-Purpose Heart Valve Therapy Assembly Fixture, Alec John Foster, John Patrick Hofstetter, Emily Lim

Mechanical Engineering

STATEMENT OF CONFIDENTIALITY: The complete senior project report was submitted to the project advisor and sponsors. The results of this project are of a confidential nature and will not be published at this time.

Lightweight Tennis Ball Pick Up & Hopper, Alejandro Morales, George Degrandis, Tyler Noxon

Mechanical Engineering

Within this document, the “Pursuit of Hoppiness” team will clarify some of the details associated with completing this design project. The project is focused on designing a mechanism for tennis players and coaches of all ages that is able to collect tennis balls around a tennis court, specifically around the net and fence. The goal is to make the final product lightweight, inexpensive, and easy to use. With multiple ideation sessions, the team was able to brainstorm several ideas that serve the above functions and constraints.

The initial process began with choosing two different ideas that followed through until the …

Cal Poly Rotor Recovered Rocket, Melissa Woodard

Mechanical Engineering

Statement of Confidentiality: The complete senior project report was submitted to the project advisor and sponsor. The results of this project are of a confidential nature and will not be published at this time.

Heat Flow Characterization Of Speakers, Sabrina M. Gough, Lydia K. Hedge, Nicolas M. Jones

Mechanical Engineering

Statement of Confidentiality: The complete senior project report was submitted to the project advisor and sponsor. The results of this project are of a confidential nature and will not be published at this time.

Cal Poly Supermileage Drivetrain, Michael Bolton, Justin Miller, Heather Fields

Mechanical Engineering

The following report details the full design process used by the Cal Poly Supermileage Drivetrain (CPSMD) Senior Project team in designing a new drivetrain system for the Cal Poly Supermileage Vehicle (SMV) Team. Included is the development stages of each component, the manufacturing of our parts, the final solution’s assembly, the testing of the project, and the results from the 2018 Shell Eco-Marathon Competition. After collecting data from several tests, only the final drivetrain efficiency and final sprocket alignment remain unknown. Otherwise, the project came in under budget, within our weight tolerance, and met all the other design objectives. The …

Human Knee Fea Model For Transtibial Amputee Tibial Cartilage Pressure In Gait And Cycling, Gregory Lane

Master's Theses

Osteoarthritis (OA) is a debilitating disease affecting roughly 31 million Americans. The incidence of OA is significantly higher for persons who have suffered a transtibial amputation. Abnormal cartilage stress can cause higher OA risk, however it is unknown if there is a connection between exercise type and cartilage stress. To help answer this, a tibiofemoral FEA model was created. Utilizing linear elastic isotropic materials and non-linear springs, the model was validated to experimental cadaveric data. In a previous study, 6 control and 6 amputee subjects underwent gait and cycling experiments. The resultant knee loads were analyzed to find the maximum …

Mechanical Characterization Of Selectively Laser Melted 316l Stainless Steel Body Centered Cubic Unit Cells And Lattice Of Varying Node Radii And Strut Angle, Christopher James Hornbeak

Master's Theses

An experimental study of several variants of radius and strut angle of the body centered cubic unit cell was performed to determine the mechanical properties and failure mechanisms of the mesostructure. Quasi static compression tests were performed on an Instron® universal testing machine with a 50kN load cell at 0.2mm/min. The test samples were built using a SLM Solutions 125 selective laser melting machine with 316L stainless steel. Test specimens were based on 5mm cubic unit cells, with a strut diameter 10% of the unit cell size, with skins on top and bottom to provide a cantilever boundary constraint. Specimens …

Finite-Difference Modeling Of The Batch Process Smoldering Combustion Of Wastewater, Laura H. Kawashiri

Master's Theses

A MATLAB model was developed for the smoldering combustion of wastewater in the context of a decentralized residential wastewater treatment appliance. Data from a batch process sewage smoldering experiment was simulated using implicit finite-difference approximations, assuming one-dimensional transient conductive heat transfer. The time-dependent temperature profiles within the column represented the main parameters of interest and were used to verify recoverable heat energy estimations. Given that the modeling method used for this thesis represents a unique approach, the assumptions and limitations of this model are thoroughly described in the context of reproducing results for other smoldering setups. A lack of convergence …

Dynamics Simulation And Optimal Control Of A Multiple-Input And Multiple-Output Balancing Cube, Felix K. Haimerl

Master's Theses

This thesis document outlines the development of a multibody dynamics simulation of an actively stabilized multiple-input, multiple-output, coupled, balancing cube and the process of verifying the results by implementing the control algorithm in hardware. A non-linear simulation of the system was created in Simscape and used to develop a Linear Quadratic Gaussian control algorithm. To implement this algorithm in actual hardware, the system was first designed, manufactured, and assembled. The structure of the cube and the reaction wheels were milled from aluminum. DC brushless motors were installed into the mechanical system. In terms of electronics, a processor, orientation sensor, motor …

Thermal Modelling And Validation Of Heat Profiles In An Rf Plasma Micro-Thruster, Alec Sean Henken

Master's Theses

The need and demand for propulsion devices on nanosatellites has grown over the last decade due to interest in expanding nanosatellite mission abilities, such as attitude control, station-keeping, and collision avoidance. One potential micro-propulsion device suitable for nanosatellites is an electrothermal plasma thruster called Pocket Rocket. Pocket Rocket is a low-power, low-cost propulsion platform specifically designed for use in nanosatellites such as CubeSats. Due to difficulties associated with integrating propulsion devices onto spacecraft such as volume constraints and heat dissipation limitations, a characterization of the heat generation and heat transfer properties of Pocket Rocket is necessary. Several heat-transfer models of …

Knee Angles And Axes Crosstalk Correction In Gait, Cycling, And Elliptical Training Exercises, Jordan M. Skaro

Master's Theses

When conducting motion analysis using 3-dimensional motion capture technology, errors in marker placement on the knee results in a widely observed phenomenon known as “crosstalk” [1-18] in calculated knee joint angles (i.e., flexion-extension (FE), adduction-abduction (AA), internal-external rotation (IE)). Principal Component Analysis (PCA) has recently been proposed as a post hoc method to reduce crosstalk errors and operates by minimizing the correlation between the knee angles [1, 2]. However, recent studies that have used PCA have neither considered exercises, such as cycling (C) and elliptical training (E), other than gait (G) nor estimated the corrected knee axes following PCA correction. …

Rotordynamic Analysis Of Theoretical Models And Experimental Systems, Cameron R. Naugle

Master's Theses

This thesis is intended to provide fundamental information for the construction and

analysis of rotordynamic theoretical models, and their comparison the experimental

systems. Finite Element Method (FEM) is used to construct models using Timoshenko

beam elements with viscous and hysteretic internal damping. Eigenvalues

and eigenvectors of state space equations are used to perform stability analysis, produce

critical speed maps, and visualize mode shapes. Frequency domain analysis

of theoretical models is used to provide Bode diagrams and in experimental data

full spectrum cascade plots. Experimental and theoretical model analyses are used

to optimize the control algorithm for an Active Magnetic Bearing …

Sensel Morph: Product Communication Improvement Initiative, Kasper W. Lui-Delange, Samuel Distler, Rafael Paroli

Industrial and Manufacturing Engineering

Sensel is a startup company that recently launched their first product. The Morph is a multi-functional touch interface that interacts with a wide range of software through touching enabled silicon overlays. The support documentation was believed to cause confusion, which is leading to limited sales and increased returns. We focused on the structures of its website and product documentation, which were initially developed without end user testing. Our team explored Sensel’s current state to develop two multiphase design alternatives. These designs provide multiple user-facing testing frameworks as well as determine the root-cause of the Morph’s current communication issues. The designs …

Improving Warehouse Capacity For Synergy Manufacturing, Brian Garcia

Industrial and Manufacturing Engineering

This report aims to aid Synergy Manufacturing (a well-recognized producer of high-performance components for off-roading vehicles) to improve in-house production capacity in wake of an expanded facility space and substantial increase in the number of current available products over the span of a few years. Current warehouse issues include struggling to meet demand, high inventory, and an unsafe overcrowding of WIP on the floor space. The steps taken to resolve these issues are to collect setup times, operational times, total process times, machine tool usage, and flow process from a selected group of five high-demand items from Synergy Manufacturing’s current …

Building A Database For A Startup: Boltabout, Danielle Tran

Industrial and Manufacturing Engineering

BoltAbout is a young start-up based out of San Luis Obispo, CA. Their primary business is renting out bikes via monthly-subscription with the opportunity to lease to own. BoltAbout has seen great success over the past 2 years and is looking to expand. The company currently has 200 bikes, but the demand is far outweighing the supply. The CEO of BoltAbout hopes to grow to grow the company’s inventory to 500 bikes by the end of 2017 and 1500 by the end of the school year. As the company continues to expand, it will need to be able to accurately …

Crystal Engineering Manufacturing Facility Analysis, Maximiliano Cortes, Eric Dustin Kornrumpf, Sthefano Alvarado

Industrial and Manufacturing Engineering

This report will encompass a two-quarter long senior project effort to provide a recommendation for the client, Crystal Engineering. Crystal Engineering is currently in the process of introducing three new products, one now and two within the next six months. However, their existing lines already occupy the available production space and as a result, they are unable to determine how to effectively incorporate new production lines within the facility. Therefore, the main objectives of this project were to deliver several facility redesign layouts backed by a holistic justification for each. The formulation of the facility redesign layouts incorporated several industrial …

Cal Poly Rose Float Overheight Mechanism, Ali A. Harake, Breanna H. Tran, Morgan K. Montalvo, Sergio B. Gutierrez

Mechanical Engineering

The Cal Poly Universities jointly build and enter a floral entry, commonly known as a float, into the Pasadena Tournament of Roses Rose Parade. At the end of this parade route, there is a 16’6” bridge all floats must drive under. The scope of our project is to design and build a mechanism roughly described as an “overheight” mechanism, as its function is to raise and lower large heavy structures so the float is able to pass under the bridge. This hydraulic mechanism is powered via the float animation system.

Manufacturing Of A Carbon Fiber Part With Complex Geometry, Caitlyn Pellemeier, Eric Rodan, Alex King, Nicolas Carlucci

Mechanical Engineering

The purpose of this study is to determine the best method for manufacturing a part with precision tolerances and a small deflection requirement. The desired tolerances include a flatness of 0.002in, parallelism of 0.005in, heat tolerance of 60℃, and a max deflection at the loaded end of the part of 0.28mm. To accomplish this, our team uses carbon fiber as the part material because compared to traditional metals it is stiffer and lighter. Carbon fiber molding processes are explored and narrowed down to Liquid Composite Molding (LCM) and Resin Transfer Molding (RTM). These processes use dry fiber combined with epoxy …

Powder Bed Surface Quality And Particle Size Distribution For Metal Additive Manufacturing And Comparison With Discrete Element Model, Irene Yee

Master's Theses

Metal additive manufacturing (AM) can produce complex parts that were once considered impossible or too costly to fabricate using conventional machining techniques, making AM machines an exceptional tool for rapid prototyping, one-off parts, and labor-intensive geometries. Due to the growing popularity of this technology, especially in the defense and medical industries, more researchers are looking into the physics and mechanics behind the AM process. Many factors and parameters contribute to the overall quality of a part, one of them being the powder bed itself. So far, little investigation has been dedicated to the behavior of the powder in the powder …

Student Shop Access And Inventory Control In The College Of Architecture And Environmental Design Shops, Ryan Raj Mattel, Chris Steven Chen, Kevin Michael Gallagher

Industrial and Manufacturing Engineering

The Cal Poly College of Architecture and Environmental Design shops, directed by David Kempken, give the opportunity for thousands of students to use the “Learn By Doing” philosophy and operate various machinery, tooling, and devices to complete projects inside and outside of the classroom. These students are able to check out tools and machinery to complete these projects on a weekly basis. This report will discuss the complexities and shortcomings of the current database system, FileMaker Pro, that is used for these transactions. The report will furthermore discuss the design and methodology of replacing this system with an improved integrated …

Reducing Same Day Missed Appointments, Lucas Madison, Tyler Moore, Jolani Chun-Moy

Industrial and Manufacturing Engineering

Radiology Associates (RA) is a diagnostic imaging center that offers high-quality, digital medical imaging and interventional radiology services for patients, physicians and healthcare organizations across the Central Coast. They are an ongoing problem that involves a considerable portion of their patients not showing up for their appointments Our project aims to reduce same day missed appointments at Radiology Associates. Radiology Associates currently has a no-show rate of 13.48%. They lose approximately $240 for every same day missed appointment. Our goal was to find new ways to reduce their no-show rate to 8%. Based on our calculations, Radiology Associates could save …

Manufacture Of Complex Geometry Component For Advanced Material Stiffness, David Russell Bydalek

Master's Theses

The manufacture, laminate design, and modeling of a part with complex geometry are explored. The ultimate goal of the research is to produce a model that accurately predicts part stiffness. This is validated with experimental results of composite parts, which refine material properties for use in a final prototype part model. The secondary goal of this project is to explore manufacturing methods for improved manufacturability of the complex part. The manufacturing portion of the thesis and feedback into material model has incorporated a senior project team to perform research on manufacturing and create composite part to be used for experimental …

Resistance Temperature Detectors In A Cryostat Refrigeration System, Kirsten Marie Manahan, Alice Callen

STAR Program Research Presentations

The Large Synoptic Survey Telescope (LSST) is a ground-based telescope that will survey the Southern sky every few nights. Located in the telescope will be a 3.2 gigapixel digital camera. To ensure proper instrumentation of the camera, there must be a monitored stable temperature. As part of my research, I assembled resistance temperature detectors and tested them to verify their reliability in measuring temperature in the camera’s cryostat refrigeration cooling system. Resistance temperature detectors function by the principle of thermal resistivity, in which their electrical resistances vary as temperature varies. Through testing, I was able to determine whether these particular …

Usa Boccia Ball Ramp For Athletes With Quadriplegia, Alissa A. Koukourikos, Matthew Lee, Nathan Bernards

Mechanical Engineering

In this report, the design process in creating an assistive device for Boccia Classification 3 (BC3) players is outlined. The initial research steps, including research into the rules of the game, capabilities of the players, and existing products is documented to show where ideas for the product stemmed from. This transitions into requirements that the sponsor requested, and preliminary designs and ideas for the product. Finally, this report explains the details of the final design, which has been analyzed for safety, ease of use, and ability to function under different conditions. The processes of manufacturing and testing will also be …

Real Time And High Fidelity Quadcopter Tracking System, Tyler Mckay Hall

Computer Engineering

This project was conceived as a desired to have an affordable, flexible and physically compact tracking system for high accuracy spatial and orientation tracking. Specifically, this implementation is focused on providing a low cost motion capture system for future research. It is a tool to enable the further creation of systems that would require the use of accurate placement of landing pads, payload acquires and delivery. This system will provide the quadcopter platform a coordinate system that can be used in addition to GPS.

Field research with quadcopter manufacturers, photographers, agriculture and research organizations were contact and interviewed for information …