Mechanical Engineering Commons^™

The Pressure Distribution Of Rotating Cylinders Using An Onboard Wireless Data Acquisition System, Nathan Eller

Master's Theses

This thesis presents a novel, cost-effective method for mapping the pressure distribution on a rotating cylinder in cross flow, a phenomenon central to the Magnus effect. Utilizing commercial-off-the-shelf (COTS) micro-electromechanical system (MEMS) pressure sensors, a high-resolution data acquisition system was developed and integrated into a rotating cylinder model. Compared to traditional approaches, such as slip rings or one-off designs, this method proved significantly cheaper and faster while achieving comparable or superior resolution. The experimental setup, including a modified continuous rotation technique and adaptable model design, facilitated rapid testing across a broad range of Reynolds numbers and reduced frequencies, exceeding the …

Design And Implementation Of A Vision-Based Deep-Learning Protocol For Kinematic Feature Extraction With Application To Stroke Rehabilitation, Juan Diego Luna Inga

Master's Theses

Stroke is a leading cause of long-term disability, affecting thousands of individuals annually and significantly impairing their mobility, independence, and quality of life. Traditional methods for assessing motor impairments are often costly and invasive, creating substantial barriers to effective rehabilitation. This thesis explores the use of DeepLabCut (DLC), a deep-learning-based pose estimation tool, to extract clinically meaningful kinematic features from video data of stroke survivors with upper-extremity (UE) impairments.

To conduct this investigation, a specialized protocol was developed to tailor DLC for analyzing movements characteristic of UE impairments in stroke survivors. This protocol was validated through comparative analysis using peak …

Product Design For Repairability: Identifying Failure Modes With Topic Modeling And Designing For Electronic Waste Reuse, Claire J. Franz

Master's Theses

Design for repairability is imperative to making products that last long enough to justify the resources they consume and the pollution they generate. While design for repairability has been gaining steady momentum, especially with recent advances in Right to Repair legislation, there is still work to be done. There are gaps in both the tools available for repair-conscious designers and the products coming onto store shelves. This thesis work aims to help set sails in the right direction on both fronts.

This research explores the use of topic modeling (a natural language processing technique) to extract repairability design insights from …

Ross Dam Micro Hydro Project, Marirose Evenden, Tyler Reents, Elena Ryan, Tevan Kim

Mechanical Engineering

The Ross Dam and reservoir in Angels Camp needs a reliable power source for powering its SCADA system which monitors its water level and flow rate. Currently, the existing hydro power supply is very unreliable and needs to be replaced with a micro hydro generator system that can consistently produce power to charge the onsite batteries. This paper details the design and implementation of a micro hydro Pelton wheel replacement system designed by our senior project team.

Outlined in this report is our design overview of the system and how our project will redesign and optimize the use of the …

Prosthetic Aid For Lifting (Pal), Emma Caringella, Cameron Yartz, Dawn Veditz

Biomedical Engineering

Approximately 1.7 million people in the United States use a limb prosthetic [1]. For these individuals, their prosthetic often enables them to engage in their choice of physical activities. Many prosthetic companies design prosthetic limbs for use in specific athletic activities such as weightlifting. These devices are not designed for everyday wear or a large variety of tasks but enable the person to interact with free weights and workout machines. According to an email conversation between the team and Bob Radocy, Founder of Therapeutic Recreational Services (TRS Inc.) and upper limb amputee, while he could not reveal how many people …

Automated Expanding Christmas Tree, Ben Mosemann, Zoey Camarillo, Xiomara Medina, Will Tedone

Mechanical Engineering

The Civic Ballet of San Luis Obispo (SLO) needs a new expanding Christmas tree for their 2024 production of The Nutcracker. This Final Design Review Report outlines pertinent information regarding the Cal Poly Mechanical Engineering Senior Project of Team F14 (“D.R.E.I.D.E.L.S.”), who was tasked of designing and building the new expanding Christmas tree frame. Our team’s name, “D.R.E.I.D.E.L.S.,” stands for Design and Research of Expansion Integrated Dramaturgy Ergonomic Leveraging Systems. We thought this would be a fun, creative, and ironic name for our team.

In this report, our team will discuss how we procured the materials required and manufactured and …

The Wildland Firefighter Respiratory Protection Device, Oliver Pilon, Xaviera Pons, Calder Wood, Tommy Ozawa, Jack Adema, Payton Mayer

Biomedical Engineering

This paper presents the development of First Respire and their design of a powered air-purifying respirator (PAPR) specifically curated for wildland firefighter while simultaneously addressing the critical absence of respiratory protection for wildland firefighters operating in the challenging wildland-urban interface (WUI) environments. Current respiratory protection options, such as bandanas and N95 masks, fall short in providing adequate defense against toxic particulate matter and gases, exposing firefighters to increased risks of health complications, including cancers and respiratory diseases. Through collaborative efforts of the Wildfire Conservancy, the WUI Fire Institute at Cal Poly, and CAL FIRE, First Respire aims to create a …

Focused Led Sintering, Dylan Defazio, Nilav Maulik, Branden Majors, Michael Fontillas

Mechanical Engineering

This report provides a detailed overview of the final design of our light-emitting diode (LED) focusing system. Our system incorporates a converging lens and a specially designed "glass funnel," which acts as a thick fiber optic that narrows the light to a fine point through internal reflection. The glass components of our system are precisely housed in a part made using advanced computer-numeric controlled (CNC) Mill and CNC Lathe manufacturing processes. This ensures high precision and durability of the overall system. Our LED focusing system is designed with a 60-watt stage light. The decision to use a glass funnel as …

Port Adapter For Unported Pressure Sensors, Peter Kristjaan Tomson, Yasser Fahad Aldaoud, Terak Benjamin Hornik

Mechanical Engineering

Boundary layer research is an exciting and ever-changing field in fluid mechanics; thus, the need for high-quality empirical data is ever-growing in importance. Dr. Westphal, a professor at California Polytechnic State University, San Luis Obispo’s (Cal Poly) Mechanical Engineering Department in conjunction with Northrup Grumman is conducting just such research. Dr. Westphal has elected to make the change to pressure sensors that do not come with a built-in port to connect to pitot-static tubes. This necessitates a solution to adapt an unported pressure sensor to his testing apparatus which requires a tubed connection. This document outlines the Final Design Review …

Cal Poly Battle Bot, Jyotaaver S. Nirula, Johnathan W. Waldmire, Andrew D. Peterson, Nathaniel Ab Davis

Mechanical Engineering

This senior project endeavored to design, construct, and optimize a 120lb robot combatant tailored for the competitive arena of combat robotics. The project is a collaborative effort between mechanical, computer, and electrical engineering students at Cal Poly, combining diverse expertise to achieve a unified goal. Our competition, RoboGames, was in April of this year in Northern California.

The mechanical engineering team assumed primary responsibility for the physical components of the battle bot, focusing on three pivotal components: a robust drivetrain, armor, and a highperformance vertical spinner. These elements constitute the foundation of the battle bot's offensive and defensive capabilities, crucial …

Nsf-Eri Evolution Of Liquid Sheet Edges Project: Soap Film Frame Withdrawal And Positioning Apparatus, Samir S. Patel, Sophia Young, Nicole N. Morgan

Mechanical Engineering

The experimental investigation of instabilities along retracting liquid sheet edges seeks to answer a fundamental fluid mechanics question. We’ve successfully delivered an experimental apparatus to conduct research and answer this question. This document chronicles a design overview of our apparatus, our manufacturing process, our design verification, and recommendations for future steps. The final product is a document outlining our final design (i.e., our ‘Final Design Review’ (FDR)).

Liftwalker, Kai A. De La Cruz, Lexie Caterine, Adam Monroe, Jame Whealan

Mechanical Engineering

The LiftWalker’s purpose is to lift users with degenerative diseases from a seated to standing position and support them as they practice the motion of walking as a form of physical therapy. The current LiftWalker is upward of $5,000 so we redesigned the LiftWalker to be more accessible around the world. This meant using affordable and accessible materials and manufacturing processes. To achieve this, we made our design mostly out of bike parts and off-the-shelf components. When it came to the lift system, we found that to maintain a safe and comfortable design it was best to purchase a trailer …

Solar Farm, Parker Folsom, Jon Copeland, Julia Fay, Aiden Taylor

Mechanical Engineering

This senior project focused on creating a portable single-axis solar follower. The purpose of this solar follower is to allow for single-axis tracking of the sun at various points on our sponsor's property to gather information on solar power production. This data will be utilized to locate future sites for a utility-scale solar farm.

The final design of the solar follower comprises four subsystems: two legs, the frame, and the panel assembly. This modular design allows for portability and adjustability on challenging terrain. Following the design stage, our team purchased and manufactured all of the necessary components. All manufacturing work …

Autolacing The Dml, Harrison Hong, Chanh Tu Derek Lam, Candice Espitia, Paolo Navarro

Mechanical Engineering

The design challenge present is the design of a system to efficiently speed up the lacing of the dry mat loop (DML), part of the GAF production line. For this year, the scope of the project focuses on research and creating a proof of concept for the mechanism responsible for moving the mat within the DML. Compiled research focuses on competitor solutions, material properties, and possible mover mechanisms to be integrated into the major design. Competitor solutions provide an idea of raw material manipulation options. Material properties and possible mover mechanisms provide the foundation for ideation and concept prototyping. The …

2024 Marine Energy Collegiate Competition, Nora Riedinger, Miles Mikkelsen, Brendan Stratford, Derek Tom, Zach Kwast, Harmon Yanikian-Sutton, Kennedy Urcelay, Tori Thomas, Brady Caron

Mechanical Engineering

PolyWave Energy is the second team from California Polytechnic University at San Luis Obispo to compete in the Marine Energy Collegiate Competition. PolyWave Energy consists of Mechanical Engineering, Electrical Engineering, and Business Administration students who have worked together from September 2023 to May 2024 on designing, building, and testing a marine power device to serve a selected market.

In response to the escalating concerns surrounding carbon emissions, climate change, and the depletion of fossil fuels, California Polytechnic State University’s Polywave Energy team has developed a sustainable and reliable energy source for Autonomous Underwater Vehicle (AUV) charging. Through extensive research of …

Robot Rodeo, Daniel Rickers, Tyler Vaughn, Vinayak Sharath, Berent Baysal, Promit Das Gupta

Mechanical Engineering

This document outlines the Final Design Review (FDR) for an autonomous robot developed in response to the Naval Surface Warfare Center (NSWC) Ship Maintenance Robot Rodeo Challenge. Through extensive analysis, we selected a design concept, built a verification prototype, and tested the prototype in the NSWC Robot Rodeo Competition. The design overview portion of this report will present the details of our design while explaining how it will function. Next, is our implementation section, which provides evidence about our procurement, manufacturing, and assembly of our product. Our design verification follows and explains the tests that we conducted on the robot …

Scitechatorium Exhibit, Adam Khan, Cole Busch, Logan Femling, Alan Onuma

Mechanical Engineering

This document outlines the final stages of development and analysis of our interactive children’s exhibit for the Bellevue-Santa Fe Charter School’s SciTechatorium. We will showcase the final form of our ball and track display, giving a detailed look at each component and subsystem.

To describe how our final prototype will be built we have included a detailed manufacturing summary for our design. Our models have been designed with manufacturability in mind, and we have outlined which processes were used to produce all our parts.

There are also detailed descriptions of testing that were conducted to verify the performance of the …

Feasibility And Characterization Of Leak-Tight Single-Track Thin Walls Produced By Laser Powder Bed Fusion In 316l Stainless Steel, Peyton J. Archibald

Master's Theses

This thesis explores the optimization of process parameters for producing single-track thin walls using Laser Powder Bed Fusion (LPBF) additive manufacturing. Using two different coupon designs, the study assesses the feasibility of creating the thinnest possible leak-tight structures within LPBF and evaluating their mechanical properties, including burst pressure and modulus of elasticity under pressure loads. A series of experimental iterations were conducted, varying laser power and laser speed to identify optimal conditions. The findings indicate that a narrow range of process parameters can produce consistently leak-tight thin walls. The results contribute to understanding how to achieve high quality, reliable thin …

Modeling The Acoustic Transmission Line With Applied Damping, Connor C. Getz

Master's Theses

The transmission line is an underappreciated style of loudspeaker enclosure characterized by an acoustic labyrinth stemming from the rear of the speaker driver. In practice, the transmission line enclosure produces airy sound uncharacteristic of other styles, at the cost of more pronounced resonant peaks. The most important practical drawback of this loudspeaker enclosure design is the difficulty of properly applying damping to these enclosures. Ideally, this difficulty can be mitigated using an analytical model that accurately predicts the SPL frequency response of a transmission line loudspeaker system for a given geometry and mass of damping material.

This research takes the …

Barcode Medication Administration (Bmca): 2023-24, Krishan R. Patel, Carlos E. Sosa, Mary Grace Sy

Industrial and Manufacturing Engineering

The Barcode Medication Administration is an important system implemented within a hospital. It is the process in which nurses and other healthcare professionals prescribe and distribute medication to the patients. It aids in organizing which patient got prescribed which medication from which doctor and provides records on who was given care by who. The whole BCMA system is a multi-step process from getting the medication prescribed, to the nurses having to pick up the medication from the medication cabinet, and then having to scan the patient and the medication to finally administer medications.

The current BCMA system implemented at the …

Supermileage Competition: Vehicle Chassis, Enrico Miguel Sangalang, Walter Oppelt, Adam Ponce, Vincent Corella

Mechanical Engineering

The Supermileage Urban Concept Vehicle Chassis Project was proposed by the Cal Poly Supermileage club. The goal of this project is to deliver a fully assembled vehicle chassis by the end of the 2023-2024 school year to be used by the club in the 2025 Shell Eco-Marathon competition. The competition requires a four-wheeled vehicle to comply with various requirements outlined in the Shell Eco-Marathon rulebook, such as dimensions and some safety requirements. The team selected a backbone-style chassis as the design direction. This design consists of a main structural beam that supports all other chassis and vehicle components. This main …

Advanced Wildfire Hose Clamp, Sean King, Christopher Tokarse, Connor Buchinski, Isaac Maddox-White

Mechanical Engineering

This report describes in detail the manufacturing, assembly, and testing of our hose clamp. We start with a review of the changes we have made to our design since our last report, namely a new automatic latching system, and continue with our manufacturing and assembly processes. Then we detail our testing procedures that we created to evaluate how well our design meets user needs and discuss the results of our tests. Unfortunately, our design did not meet our residual flow rate criteria and showed excessive leaking when clamped, so we end with some discussion of the issues our design has, …

Sizing Wind Tunnel Heater For High Enthalpy Conditions, Justin M. Slavick

Master's Theses

This paper determines the feasibility of adding a heater to an existing blowdown supersonic wind tunnel to unlock new high-enthalpy test applications, considering cost and power requirements at a variety of different states. This process includes both modeling the current range of test section properties in Cal Poly's blowdown wind tunnel and determining the new range of properties that a heat exchanger could induce. These results are verified with a computational fluid dynamics study. Additionally, sublimation and ablation properties of materials are explored to create appropriate models to study atmospheric re-entry once the heat exchanger is implemented.

It is found …

Impact Force Helmet Device For Concussion Monitoring, Patrice Mulligan, Karina Mealey, Zack Borthwick, Benjamin Fick

General Engineering

To track head trauma in football, our device is placed inside a football helmet to measure both linear and gyroscopic (rotational) accelerations. These measurements are taken using an ADXL375 linear accelerometer and an LSM6DSOX accelerometer and gyroscope. The data from these sensors is processed and transmitted wirelessly by a SparkFun Thing Plus microcontroller to another SparkFun Thing Plus microcontroller connected to a laptop on the sidelines. Our program on the laptop stores the acceleration impact data into a .csv file for each player. If a likely concussive impact is detected, the program displays a popup warning. Testing results were promising …

Smart Manufacturing For Cal Poly's Ime Curriculum, Grace L. Guarraia, Eric F. Ledesma

Industrial and Manufacturing Engineering

California Polytechnic State University, San Luis Obispo (Cal Poly) takes pride of supporting one of the nation’s strongest undergraduate Industrial and Manufacturing Engineering programs. However, as industry evolves to accommodate advancing computing power, improved manufacturing algorithms, and improved robotics, it is imperative that Cal Poly’s curriculum evolves in parallel. Smart manufacturing is the future of the manufacturing industry, and Cal Poly is searching for the ideal method to teach and integrate Smart Manufacturing into its classes. With its upcoming switch to the semester system, coupled with its “Learn by Doing” motto, the department is at an ideal period for the …

3d-Printed Remote Controlled Aircraft, Sebastian Bessoudo, Jose Ramirez, Manny Ruiz, Andrew Edwards

Mechanical Engineering

The Senior Project for the 3D Printed Aircraft presents a compelling challenge to the team: design and fabricate an aircraft for the Cal State LA 3D-Printed Fixed-Wing Aircraft Competition, comprising three distinct events: Flight, Design, and Simulation. The objective of the flight competition is to achieve the longest flight duration, while the design event emphasizes innovation and originality. In the Simulation contest, our aircraft's CAD model undergoes Computational Fluid Dynamics analysis to assess its aerodynamic performance. These competitions are slated for May 2024.

While building the aircraft has its limitations due to the source of our construction being only 3D …

Snap It & Send It, Samantha Gonzales, Brienne Berger, Kelsea Clays, Jessica Schmok

Mechanical Engineering

This report details the final design, manufacturing and assembly, testing procedures and results, as well as future design recommendations of a device aimed at enhancing the mountain biking experience for individuals with limited thumb strength. This project particularly focused on the experience of our sponsor, Cal Poly Mechanical Engineering Professor Andrew Kean. Our team's objective was to create a secure, ergonomic handlebar grip system that does not require thumb strength and is adaptable to various mountain bike models. The final design utilizes a rigid hook that snaps onto mountain bike handlebars with a long, flat piece that slides into a …

Automated Expanding Fireplace, Fermin Moreno, Eduardo Hernandez, Wilbert Quiterio, Ben Hoefer

Mechanical Engineering

The Final Design Review (FDR) encompasses information regarding the final design verification prototype (FVP), manufacturing, testing, and future recommendations for the Expanding Fireplace Senior Project sponsored by the SLO Civic Ballet. The project aims to create the frame of an expanding fireplace set piece for The Nutcracker production at the Cal Poly Performing Arts Center in December 2024. The current set piece being used has unfavorable features that will be addressed with the new design. The current set piece being used has unfavorable features that have been addressed with the new design we have developed. Our sponsors have proposed several …

Miniature Train Engine, Jason Patrick Lacson Del Castillo, Renato Andrew Dilauro, Sophia Theresa Tiu, Robert John Pallares Iii

Mechanical Engineering

This report details the redesign of the Mini Train Prop for the SLO Civic Ballet’s The Nutcracker, aiming to create a lighter, more user-friendly, and easily maneuverable train. The Final Design Review (FDR) includes the design process, manufacturing plan, and justifications for decisions made. Key improvements are reducing the train's weight, automating the fake wheels, and enhancing maneuverability with a neutral pin and lever system. In this report we detail the significant changes since the Critical Design Review (CDR). The implementation covers procurement, manufacturing, and assembly, while design verification ensures compliance with cost, weight, turn radius, and structural integrity specifications. …

Bird Trail Stairway Access Replacement, Mackenzie Wright, William Spellman, Nicholas Buccino, Jack Long

Mechanical Engineering

Dana Adobe & Cultural Center, a non-profit organization in Nipomo, California, seeks to restore access to the Bird Trail located on their site. This project aims to design and manufacture a replacement stairway for safe creek bed crossing on the trail. Within this document, we have detailed our system design, function, and justification for our design. The procurement, manufacturing, and assembly plan have been outlined along with tests we completed.

One of the most important functions of our design is for the structure to be retractable so that it can be removed from the creek bed when needed. To address …