The Design, Testing, And Manufacturing Of A Pin Fin Extrusion Heat Sink, Arash Michael Mira

Industrial and Manufacturing Engineering

My senior project focuses on the design, testing, and manufacturing of pin fin extrusion heat sinks that are you used to cool simple electronic applications across a multitude of markets. Without the modern day heat sink, electronics that we have become familiar with throughout our everyday lives will cease to exist. I will design these heat sinks using Solid Works 3D CAD. I will then test the heat sinks using ICEPAK CFD software, where I will model the heat sink against a 5 watt application, inside of a cabinet that models the chassis of a computer. After receiving these results, …

Evaluation And Design Of Potting Production Process Improvements For The Non-Profit Organization, Growing Grounds Farm, Maiya Avalon Bourland, Precilla Tang

Industrial and Manufacturing Engineering

This report focuses on the potting production process for the non-profit organization (NPO) Growing Grounds Farm (GGF), and aims to promote a standardized workflow system to enhance the working experience for Transitions‐Mental Health Association employees and volunteers. This project takes careful consideration into the process improvements proposed so to support the double bottom line of economic and social objectives. To address the equally important objectives, the Human Centered Design toolkit created by IDEO, specifically for third sector organizations, was integrated with the traditional Industrial Engineering design process methodology. Feasible alternatives were developed and evaluated based on the objectives. The selected …

Design Of An Automated Employee Scheduling System, Matthew Cameron, Yuriy Goldman

Industrial and Manufacturing Engineering

Many retail stores, as well as other organizations that employ a multitude of part-time employees, rely on developing schedules frequently, since the availabilities of the employees as well as the needs of the business change often. This process is often performed on a weekly basis, and is complex and time-consuming. The schedule must typically satisfy numerous requirements, including business needs, legal restrictions, and employee availability constraints. As a result, errors are common, and employee time that could have been spent on improving sales or operations is instead consumed by the scheduling task.

This project explores two solution methods for this …

Atk's Radial Airframe Forming Process Assessment, Andres Martinez

Industrial and Manufacturing Engineering

The purpose of this project was to provide ATK with a solution to increase efficiency in the R-02 radial forming center so that it could meet the increase in demand projected for the next 5 years. In addition, give ATK projected dates of when new machines would need to be implemented to be able to keep up with the demand. The system was analyzed through time studies to identify areas of possible improvement and eliminate any non-value added activities. Cycle times of each activity were used to simulate the current state of the system using ProModel software. Changes in operations …

Restaurant Design: An Industrial Engineering Perspective, Joseph Travis Spanu

Industrial and Manufacturing Engineering

The objective of this paper is to design a health food restaurant using current industrial engineering tools and practices. This includes creating a menu, determining the average gross profit per customer, determining the location, designing a 3-d layout, simulating service, and analyzing local food supply chains. Using a simplified menu and pricing quotes from a food distributor, the average gross profit per customer is estimated to be $3.50. Location is determined by comparing the predicted number of customers and the cost to rent at two different areas. A downtown location is determined to gross approximately $5,200 per month over a …

Novel Approach To Junctional Bleeding: Tourniquet Device Proposal For Battlefield Hemorrhage Control, Kyle W. Cabaniss

Master's Theses

This study investigated possible solutions to the current wartime problem of junctional hemorrhaging, or massive traumatic hemorrhaging in non-tourinquetable areas such as the neck, groin, or armpit. Junctional hemorrhaging has been identified as a major contributor to potentially survivable deaths seen on the battlefield today and therefore is a priority for the U.S. armed and coalition forces (Kragh et al., 2011a; Bozeman, 2011). Common tourniquets today are standard issue and carried by soldiers in the military, but are limited to distal extremity trauma. As the battlefield has changes however, trauma has transformed from commonly seen gunshot wounds to more extreme …

Design And Optimization Of A Keycard Encoding Machine, Elliott Oberg

Biomedical Engineering

Security on college campuses is a good thing, especially when it comes to your dorm room or apartment building. But due to high initial cost, the Housing and Business Department at Cal Poly, San Luis Obispo, has opted for a proprietary door lock system which requires encoding new keycards manually for every resident, every year. The goal of this project is to offset this labor cost and drain on resources by automating the keycard encoding process. This project will address the design specifications and economic advantages of automation while also exploring and comparing alternative solutions.

Women's High Heel Discomfort Analysis And Prototype Solution, Kevin Blakley, Annamarie Kepple

Industrial and Manufacturing Engineering

ABSTRACT

WOMEN’S HIGH HEEL DISCOMFORT ANALYSIS AND SOLUTION

Kevin Blakley and Annamarie Kepple

Women love high heeled shoes, but this love comes at the cost of comfort. Wearing high heels causes a lot of pain and, in the long term, health complications. This project tries to overcome the problem by ultimately making high heels more comfortable. In order to do this, one must first understand the reasons that high heels are uncomfortable, such as arch angle, heel height, and the changes in walking motion. Once there is a true understanding of the factors that contribute to high heel discomfort, the …

Kase, The Laptop Cooling Case, Jana Morrison, Tyler Ries

Biomedical Engineering

This report describes the final design and analysis of a laptop cooling case as a marketable product for a group of entrepreneurial marketing student based out of California Polytechnic State University San Luis Obispo. Background market research and empirical measurements were taken in order to confirm that this would be a marketable product worth designing. Then previous solutions were researched in order to identity weaknesses and strengths. After rigorous research, it was determined that a passive cooling system, in which channels directed airflow to the computer fan would be the best system in terms of functionality, performance, and cost. A …

The Effect Of Sensor Mass, Sensor Location, And Delamination Location Of Different Composite Structures Under Dynamic Loading, Albert Darien Liu

Master's Theses

This study investigated the effect of sensor mass, sensor location, and delamination location of different composite structures under dynamic loading. The study pertains to research of the use of accelerometers and dynamic response as a cost-effective and reliable method of structural health monitoring in composite structures. The composite structures in this research included carbon fiber plates, carbon fiber-foam sandwich panels, and carbon-fiber honeycomb sandwich panels. The composite structures were manufactured with the use of a Tetrahedron MTP-8 heat press. All work was conducted in the Cal Poly Aerospace Structures/Composites Laboratory. Initial delaminations were placed at several locations along the specimen, …

Cal Poly Nano Hydro, Brandon N. Fujio, Alex J. Sobel, Andrew F. Del Prete

Mechanical Engineering

This projects goal was to design, construct, and test a machine capable of generating a usable amount of energy from naturally flowing water. The device conceived for this purpose is a portable raft with a turbine mounted to the underside. The turbine is mated directly to a low angular velocity generator which outputs to a power electronics system on shore. Using a Gorlov Helical turbine, this proof-of-concept is designed to output ~50 Watts of electricity to charge a battery for later use. Possible applications for this device include camping in remote locations, supplemental power generation for a home, or for …

Strider: Manufacturing Processes, Michael Warren-Angelucci

Industrial and Manufacturing Engineering

The goal of the Strider Project is to create a mobility device that can support a person with weakened leg strength and enable them to be supported and maintain a standing position. A prototype of the Strider was created by three Mechanical Engineering students as their senior project. The topic of this senior project was to analyze and create a manufacturing process for the manufacture of the Strider that will be ergonomic and cost effective.

There were many things that needed to be accomplished in order to create the manufacturing process. The first step was to verify that the prototype …

Micro-Grid Wind Energy System, Aaron Steinkraus, Brian Huntziker, Cesar Hurtado

Mechanical Engineering

With the completion of a 3.5kW wind turbine located on Esculea Ranch, the power generated from the turbine was dissipated through electric resistance heaters. ABC Wind was given the task to design, build, and implement a system what will efficiently use the turbine’s harnessed power. After interviewing with the Beef Operations Manager of Escuela Ranch, it was decided to use the turbine’s power to supply supplementary water to anywhere on the ranch where and when needed by grazing cattle. The purpose of this project was to research, design, build and implement a system that would harness the generated power and …

Handitrike - Recumbent Tricycle, Sean Higginson, Kevin Howie, Vinay Patel

Mechanical Engineering

This report covers the design and construction of the recumbent racing tricycle for Mr. Robert T. Kelly, a disabled veteran. Unfortunately Rob’s right leg is five inches shorter than his left one and therefore is unable to properly operate standard cranks. Our team HandiTrike is composed of Sean Higginson, Kevin Howie, and Vinay Patel and our project requires us to come up with a design that is feasible to complete within the given three quarters, as well as allow Rob to gain full use of his tricycle. Currently Rob ‘s trike uses the standard crank set up found on most …

Formula Sae Turbocharger Engine Development, Eric Griess, Kevin Mccutcheon, Matthew Roberts, William Chan

Mechanical Engineering

This project, Formula SAE Turbocharger System Development, was sponsored by the Cal Poly, San Luis Obispo Formula SAE team. The team proposed this project in order to have a powerful yet lightweight engine so they can be extremely competitive at their competition. The baseline output of the single cylinder 450cc engine (2006 Yamaha WR450F) was 46 horsepower and 27 ft-lb of torque. The goal of this project was to increase the output of that engine to 60 horsepower and 35 ft-lb through the use of a turbocharger.

Solar Turbines Creep Test Fixture, Rene Maciel, Eric Nelson, Chris Ewald

Mechanical Engineering

No abstract provided.

Integrating Qplm And Biomedical Test Data With An Anisotropic Fiber Distribution Model And Predictions Of Tgf-Β1 And Igf-1 Regulation Of Articular Cartilage Fiber Modulus, Michael E. Stender, Christopher B. Raub, Kevin A. Yamauchi, Reza Shirazi, Pasquale Vena, Robert L. Sah, Scott J. Hazelwood, Stephen M. Klisch

Mechanical Engineering

A continuum mixture model with distinct collagen (COL) and glycosaminoglycan elastic constituents was developed for the solid matrix of immature bovine articular cartilage. A continuous COL fiber volume fraction distribution function and a true COL fiber elastic modulus ( Ef) were used. Quantitative polarized light microscopy (qPLM) methods were developed to account for the relatively high cell density of immature articular cartilage and used with a novel algorithm that constructs a 3D distribution function from 2D qPLM data. For specimens untreated and cultured in vitro, most model parameters were specified from qPLM analysis and biochemical assay results; consequently, Ef was …

Design And Simulation Of Passive Thermal Management System For Lithium-Ion Battery Packs On An Unmanned Ground Vehicle, Kevin Kenneth Parsons

Master's Theses

The transient thermal response of a 15-cell, 48 volt, lithium-ion battery pack for an unmanned ground vehicle was simulated with ANSYS Fluent. Heat generation rates and specific heat capacity of a single cell were experimentally measured and used as input to the thermal model. A heat generation load was applied to each battery and natural convection film boundary conditions were applied to the exterior of the enclosure. The buoyancy-driven natural convection inside the enclosure was modeled along with the radiation heat transfer between internal components. The maximum temperature of the batteries reached 65.6 °C after 630 seconds of usage …

Process Improvements For Establishing Cmmi Certification At Company Xyz, Megan Farrell

Industrial and Manufacturing Engineering

CMMI stands for Capability Maturity Model Integration and is an enterprise-wide Process-Improvement model that provides a set of best practices that addresses productivity, performance, costs, and stakeholder satisfaction. This improvement model is generally used in computer software companied and not only does it improve their processes, but many contracts will only be awarded with those companies who are CMMI certified, so it is very important for Company XYZ. This goal of this project was to help improve the CMMI efforts at Company XYZ in 4 of the 20 distinct processes areas to attain a CMMI Maturity Level of 3. Improvement …

Design And Manufacture Of Natural Composite Canoe, Derek Baptista

Industrial and Manufacturing Engineering

Abstract

This report looks into the application and feasibility of manufacturing natural composite canoes. The main fabrics that were analyzed are flax, hemp, and jute. These were then compared to carbon fiber and fiberglass to see the difference in mechanical properties. It was found that the natural fibers have lower mechanical properties but that this could be overcome by designing a balsa wood core with ribs running up the walls. After manufacturing a hemp canoe, many lesson were learned and areas of interest were further explored. With the use of different natural fibers, these canoes can greatly reduce the carbon …

Chsr Clothing: How To Start A Small Business Clothing Line To Be Run Efficiently With Minimum Capital And Maximum Profit, Kayvon Banisalam

Industrial and Manufacturing Engineering

Executive Summary

Many clothing brands have failed because they did not design marketable products with a suitable business plan. Often times, clothing brand owners do not use the capital they possess in efficient ways. They can get caught off guard with unexpected costs and are not running the business in the most resourceful and professional way.

The goal of this project is to create a clothing brand that portrays distinctive designs to go along with an effective business model. This includes implementing decision analysis at several points of the planning phase, along with quality and cost controls. Creating quality products …

Facilities Planning For An Aerospace Manufacturing Company, William Petrossi

Industrial and Manufacturing Engineering

Absolute Technologies Inc. (ATI) has been growing for years, and is running out of space at their current manufacturing facility in Yorba Linda, CA. ATI will be moving to a much larger facility this winter. They are looking for an efficient way to utilize this space. The machine positions were taken as fixed, seeing as a lean expert was brought in to give advice on placement. With the machines fixed, the scope was narrowed to other areas.

A systematic approach to facilities design is utilized. First, a goal needs to be defined. The goal is to reduce the time wasted …

Consolidation Of Company Abc, Estelle Sillari-Owen

Industrial and Manufacturing Engineering

This project aims to solve Company ABC’s issues in order to keep the company afloat and to keep the company profitable. This was done by reducing Company ABC’s organizational and inventory build-up issues. The project aims to reduce the company’s dependence on outside storage, with plans of consistent inventory reduction over the next year. An implementation plan was created to ensure the company keeps on track to increase profits and prevent against increasing inventory costs.

Wolfpack Gear Inc. Composite Frame Firefighter Backpack, Gabriel Mountjoy, Blair Ridings, Carl Drummond Buchenroth

Mechanical Engineering

No abstract provided.

Silicon Wafer Temperature Distribution, Daniel Gonzalez, Nathan Jones, Dylan Justice

Mechanical Engineering

Applied Materials is a global company that designs equipment for use in the semiconductor manufacturing industry. The scope of this project covers process chambers used for depositing thin chemical films onto silicon wafers. These processes must take place in particularly specific environments– including extremely low pressures and high temperatures. One challenge engineers face when designing these processes is carefully controlling the thermal behavior of silicon wafers. Typically, behavior is predicted using time consuming and computationally expensive CFD simulations. We have been asked to address this issue with a simpler, faster model which will allow engineers to reduce the total number …

Hepa Filter Evaluation Furnace Control Unit, Matt Gainer, Marc Goupil, Andrew Woolrich

Mechanical Engineering

No abstract provided.

Work In Progress: Outreach Assessment: Measuring Engagement, Lizabeth Schlemer, John Oliver, Katherine Chen, Sophia Rodriguez Mata, Eric Kim

Industrial and Manufacturing Engineering

The Learn By Doing Lab (LBDL) at Cal Poly, San Luis Obispo is an on-campus laboratory where 5th through 8th grade students are taught by undergraduates who may be planning a careers in teaching. The two populations - elementary students and undergraduates - are equally important in the process. Since 2008, the lab has seen over 4000 elementary and junior high students and over 100 undergrads have participated. In most outreach assessment the number of individuals participating is an important metric, but this last Spring we experimented with a more in depth measure of effectiveness. As in any learning experience …

Warehouse Redesign, Cristine Carmel Dewar

Industrial and Manufacturing Engineering

A young, growing biomedical company is expanding its warehouse space to keep up with the increasing production. This project’s goals were to recommend a layout and improve a process that would minimize the distance traveled by the material handlers, increase the safety of the warehouse by implementing visual controls, implement ergonomics to reduce chance of injury, and save money for the company. To achieve this first I familiarized myself with their current processes and department and the space required for their current and future production levels. Next I created two alternative layouts, the first (Layout A) to minimize distance and …

Finite Element Model Updating For Rotary Machinery, Nathalie Gotin

Master's Theses

The main approach of this thesis was to develop a mathematical model that represents a rotary machine. Experimental data was used to define a finite element model (FEM). In order to obtain the experimental data, the rotary machine had to be balanced. An impact hammer test made it possible to obtain frequency response functions (FRF). The frequency response functions were curvefitted in order to obtain the mode shapes and natural frequencies.

Mathematical models have been created with ABAQUS and Matlab. For the Matlab Model the assumption has been made that the rotor machine consists of a specific number of beam …

Technology Portal For Energy Efficient Buildings, Larry D. Hermanson, Daniel Studer, Annie Mroz

STAR Program Research Presentations

Project: Technology Portal for Energy Efficient Buildings

Date: August 2, 2012

Author: Larry Hermanson

Mentor: Daniel Studer

Cohort: Annie Mroz

Lab site: National Renewable Energy Laboratory (NREL)

Buildings account for 71% of the electricity demand and 39% of the primary energy consumption in the United States. The Commercial Buildings Group at NREL provides builders, designers and building owners accurate information to significantly improve the energy efficiency of new and existing buildings. The Technology Portal for Energy Efficient Buildings will increase the accessibility of standardized and credible energy performance data for all building systems, thereby allowing building owners to better evaluate …