Mechanical Engineering Commons^™

Transient Heat Transfer To Rolling Or Sliding Drops On Inclined Heated Superhydrophobic Surfaces, Joseph Furner, Daniel Maynes, Brian D. Iverson, Julie Crockett

Faculty Publications

The thermal transport to drops that roll or slide down heated superhydrophobic surfaces is explored. High-speed infrared imaging is performed to provide time-resolved measurement of the heat transfer to the drop. Data are obtained for drops moving along smooth hydrophobic and structured superhydrophobic surfaces. Both post and rib style structures with surface solid fractions ranging from 0.06 to 1.0 are considered. The inclination angle of the surfaces was varied from 10 deg to 25 deg, and the drop volume was varied from 12 to 40 µL. The measurements reveal that the drop speed is a strong function of both the …

Trajectory Optimization Of Evtol And Conventional Aircraft: A Comparative Analysis Of Vortex Particle Method And Vortex Lattice + Blade Element Momentum Theory, Andrew Tagg, Ryan Anderson, Cibin Joseph, Andrew Ning

Faculty Publications

Trajectory optimization of aircraft transition maneuvers can significantly influence the design of these systems, particularly when making decisions about aircraft geometry, propulsion sizing, and control system design. This paper presents the trajectory optimization of air vehicles including electric vertical takeoff and landing (eVTOL) as well as conventional aircraft. The study evaluates the influence of fidelity in trajectory design by comparing the use of two aerodynamic methods in the context of trajectory optimization. The mid-fidelity method utilizes a vortex lattice method (VLM) to model lifting surfaces while employing blade element momentum theory (BEMT) to model rudimentary rotor-wing interactions. The high-fidelity approach …

Geometrically Exact Beam Theory For Gradient-Based Optimization, Taylor Mcdonnell, Andrew Ning

Faculty Publications

Decades of research have progressed geometrically exact beam theory to the point where it is now an invaluable resource for analyzing and modeling highly flexible slender structures. Large-scale optimization using geometrically exact beam theory remains nontrivial, however, due to the inability of gradient-free optimizers to handle large numbers of design variables in a computationally efficient manner and the difficulties associated with obtaining smooth, accurate, and efficiently calculated design sensitivities for gradient-based optimization. To overcome these challenges, this paper presents a finite-element implementation of geometrically exact beam theory which has been developed specifically for gradient-based optimization. A key feature of this …

Derivative Propagation Through Vortex Particle Method Simulation, Eric Green, Andrew Ning

Faculty Publications

Automatic differentiation (AD) is a powerful tool for evaluating numerical derivatives. In particular, reverse-mode AD provides numerical gradients in a way that is insensitive to the number of input variables. This makes reverse-mode AD well-suited for solving large optimization problems. However, reverse-mode AD has a particularly large associated memory cost because most intermediate values in operations need to be cached. This is problematic for large problems such as aerodynamics simulations, though, since the memory requirements can quickly become impractical. The solution implemented in this work is to provide analytic pullback expressions for functions for which many of the intermediate values …

Ductape: A Steady-State, Axisymmetric Ducted Fan Analysis Code Designed For Gradient-Based Optimization, Judd Mehr, Andrew Ning

Faculty Publications

Electric ducted fans have become an intriguing option for the propulsion systems of clean, quiet advanced air mobility technologies due to their potential benefits in both aerodynamic efficiency and reduced noise profiles compared to open rotor systems. Exploration of conceptual electric ducted fan design in the context of novel, and often complex, applications may be greatly aided by the use of optimization techniques. Specifically, gradient-based optimization lends itself to the exploration of large, complex, multi-disciplinary systems due to its inherent scalability. Despite ducted fans/propellers having been relatively well studied for the last century, modern, gradient-based, optimization-ready analysis tools for ducted …

Solving Unsteady Potential Flow Problems In O(N) Time, Ryan Anderson, Andrew Ning

Faculty Publications

Design of vertical takeoff and landing aircraft is challenging in part due to significant aerodynamic interactions between rotors and wings. Computational models can aid in their design, but are computationally expensive. 3-D panel methods coupled with vortex particle wakes offer an attractive solution, but solving for the panel strengths scales poorly for large problems. Multigrid methods, such as Krylov subspace methods in conjunction with the fast multipole method (FMM), have been demonstrated to reduce the scaling to O(𝑁). We explore the performance and limitations of the Krylov-FMM method, traditional matrix-powered GMRES, LU decomposition, and a novel O(𝑁) multigrid approach to …

Distributed Conflict Detection And Optimal 4d Trajectory Resolution Leveraging Polynomial Based Methods, Michael Klinefelter, Austin Stone, Joshua Miller, Cameron K. Peterson, John Salmon

Student Works

This paper presents a methodology for distributed conflict detection and resolution of aircraft following time-dependent flight paths. We use parametric fifth-order polynomial splines to define the full, time-based paths of vehicles. This representation can be exploited to rapidly detect conflicts and calculate optimal resolution solutions that minimize deviations from the original path. Conflicts are identified using a Sturm sequencing procedure and resolutions are found using gradient-based optimization techniques. Simulations show the locally optimal resolution of complex multi-vehicle conflicts and large-scale scenarios. Also, a method of fitting the flight path model to data sets is presented and flight path trajectories are …

Comparison Of Empirical And Analytical Eigenfunctions As Bases For Reduced Order Methods In Heat Transfer, Jakob G. Bates, Matthew R. Jones, Christopher R. Dillon, John Tencer

Student Works

Reduced order methods using spectral representations show promise in facilitating and accelerating heat transfer analyses. This paper proposes a taxonomy for reduced order methods, classifying a method as reduced order compression, modelling, or analysis. The performance of bases formed with analytical and empirical eigenfunctions are compared for representative reduced order tasks. The Akaike Information Criterion is applied in a novel way to compare the performance of these bases. The present study finds that both bases are parsimonious for reduced order compression tasks. Empirical eigenfunctions are more robust to for reduced order modelling with variations in modelling parameters such as thermal …

Ifn-𝜸 And Il-10 Immunosensor With Vertically Aligned Carbon Nanotube Interdigitated Electrodes Toward Pen-Side Cattle Paratuberculosis Monitoring, Shaowei Ding, Benjamin J. Brownlee, Kshama Parate, Cicero C. Pola, Bolin Chen, Jesse M. Hostetter, Douglas Jones, John Jackman, Brian D. Iverson, Jonathan C. Claussen

Faculty Publications

Highly sensitive vertically aligned carbon nanotube arrays (VANTAs) interdigitated electrode (IDE) arrays are developed for electrochemical biosensing of two cytokines (i.e., interleukin-10 (IL-10) and interferon-gamma (IFN-𝜸)) that are useful for early detection Johne’s disease (Bovine Paratuberculosis) in cattle. The high aspect ratio VANTA-IDEs (50–60 μm in height) are grown through a chemical vapor deposition process from an iron (Fe) catalyst that is lithographically patterned on a silicon wafer with equal finger width and inter-finger spacing of 25 μm. After functionalization with distinct antibodies the VANTA-IDEs are capable of selective detection of both IL-10 and IFN-𝜸 within an actual biological matrix …

Characterization Of Magnetically Stabilized Hinges For Origami-Inspired Mechanisms, Larry L. Howell, H T. Pruett, Philip Klocke, Spencer Magleby

Faculty Publications

Origami-inspired mechanisms provide opportunities for deployable systems, including reflectarray antennas. There is a need for approaches to deploy and stabilize such arrays. Magnetic mechanisms show promise for meeting those needs and methods for modeling their behavior would facilitate their design and analysis. We demonstrate the existence of bistability in select configurations of magnetically stabilized hinges and characterize their equilibrium positions as a function of parameters estimated from simulation data for these mechanisms. Other relevant information such as potential energy, axial force data, angular position of unstable equilibria, and transition values from bistability to monostability are also modeled. The results are …

The Surrogate Fold Catalog: A Design Tool For Origami-Inspired Mechanical Systems, Larry L. Howell, Ivy Running, Phebe Ramsdell, Carolina Wright, Spencer P. Magleby

Faculty Publications

Origami has inspired work in many fields of science and engineering. However, it can be difficult to transfer the motion of an origami design from folded paper to thicker, stiffer materials. When using engineering materials, creases from an origami fold pattern are usually replaced with “surrogate folds”. While many different surrogate folds have been developed, it is challenging for a designer to quickly survey and compare potential surrogate folds. Surrogate folds can improve many origami-inspired designs and applications by changing how the designs are manufactured and how they behave. This work categorizes compliant mechanisms that may be effective as surrogate …

Leveraging Compliance To Design A Minimally Invasive, Expandable Interbody Cage Capable Of Customized Anatomical Fit For Spinal Fusion Surgery, Larry L. Howell, Daniel J. Orr, Anton E. Bowden, Christian Payne, Hailey Jones, Bruce M. Frankel, James Anderson, Alek Sperry, Brandon Sargent

Faculty Publications

As spinal fusion surgery continues to transition to less invasive techniques, there remains an unmet need for ever smaller and more complex interbody cages to meet the unique needs of this difficult surgery. This work focuses on the hypothesis that this need can be met using the inherent advantages of compliant mechanisms in a way no previous device has. Deployable Euler Spiral Connectors optimized using a gradient based optimization algorithm were used as the foundation for a device that can stow to a very small size for device insertion then bilaterally deploy to a substantially larger device footprint. Additionally, a …

Ifn-𝜸 And Il-10 Immunosensor With Vertically Aligned Carbon Nanotube Interdigitated Electrodes Toward Pen-Side Cattle Paratuberculosis Monitoring, Shaowei Ding, Benjamin J. Brownlee, Kshama Parate, Cicero C. Pola, Bolin Chen, Jesse M. Hostetter, Douglas Jones, John Jackman, Brian D. Iverson, Jonathan C. Claussen

Faculty Publications

Highly sensitive vertically aligned carbon nanotube arrays (VANTAs) interdigitated electrode (IDE) arrays are developed for electrochemical biosensing of two cytokines (i.e., interleukin-10 (IL-10) and interferon-gamma (IFN-𝜸)) that are useful for early detection Johne’s disease (Bovine Paratuberculosis) in cattle. The high aspect ratio VANTA-IDEs (50–60 μm in height) are grown through a chemical vapor deposition process from an iron (Fe) catalyst that is lithographically patterned on a silicon wafer with equal finger width and inter-finger spacing of 25 μm. After functionalization with distinct antibodies the VANTA-IDEs are capable of selective detection of both IL-10 and IFN-𝜸 within an actual biological matrix …

Review Of The Cavity Effect: Modeling And Impact Of Cavity Shape On Apparent Radiative Surface Properties, Ehsan Mofidipour, Matthew R. Jones, Brian D. Iverson

Faculty Publications

Radiative surface properties play a critical role in the analysis, design, and optimization of thermal systems. Geometry has a strong influence on the emission and absorption characteristics of a surface. Modification of radiative surface properties may be achieved by using engineered surfaces or cavities by capitalizing on the cavity effect. A model for the apparent emissivity of an arbitrarily shaped cavity with spectrally and directionally dependent radiative surface properties is presented in this work. This model is verified through comparison with published models of the apparent radiative properties of cylindrical cavities. The merit of this model is demonstrated by obtaining …

Review Of Computational Models For Large-Scale Mdao Of Urban Air Mobility Concepts, Darshan Sarojini, Marius L. Ruh, Jiayao Yan, Luca Scotzniovsky, Nicholas C. Orndorff, Ru Xiang, Han Zhao, Joshua J. Krokowski, Michael Warner, Sebastiaan Pc Van Schie, Ashley Cronk, Alexandre T. R. Guibert, Jeffrey T. Chambers, Lauren Wolfe, Rachel Doring, Robin Despins, Cibin Joseph, Ryan Anderson, Andrew Ning, Hyunjune Gill, Seongkyu Lee, Zeyu Cheng, Zhi Cao, Chunting Mi, Y Shirley Meng, Christopher Silva, Jiun-Shyan Chen, H. Alicia Kim, John T. Hwang

Faculty Publications

The advent of Urban Air Mobility (UAM) has necessitated a paradigm shift in aircraft design from traditional regression methods to physics-based analysis and the use of modern computational methods. This paper explores the intricacies of UAM aircraft design, acknowledging the limitations of historical empirical equations and advocating for the use of physics-based tools in the early stages of the design process. It underscores the importance of Multidisciplinary Design, Analysis, and Optimization (MDAO) as a means to integrate physics-based tools for conceptual design, facilitating decisions on configuration and sizing. The paper presents a comprehensive survey and review of computational models across …

Methodology For Designing And Improving Novel Kirigami Patterns Using The Hamiltonian Circuit Framework, Larry L. Howell, Nathan Coleman, Mckaelin Edralin, Specer P. Magleby, Denise Halverson, Zhong You

Faculty Publications

The ability to compactly fold arrays to be deployed in space has seen an increasing demand in the aerospace industry. In this work, we build on existing methods to create kirigami patterns which can stow compactly and deploy out to a predictable shape using Hamiltonian circuits. We detail how designers can use this method to create novel kirigami patterns for a desired deployed shape and area. We also discuss techniques for modifying and improving the behavior and performance of kirigami patterns created using this method, and then show example applications including as a deployable radio frequency antenna of this method …

Drop Retention And Departure In Adiabatic Shear Flow On Structured Superhydrophobic Surfaces, Blake M. Lyons, Daniel Maynes, Julie Crockett, Brian D. Iverson

Faculty Publications

Drops are retained or held on surfaces due to a retention force exerted on the drop by the surface. This retention force is a function of the surface tension of the liquid, drop geometry, and the contact angle between the drop and the surface. When external or body forces exceed the retention force, the drop begins to move. This work explores the conditions for which drop departure occurs on structured superhydrophobic surfaces in the presence of an applied shear flow. Drop departure is explored for five microstructured superhydrophobic surfaces, one nanostructured carbon nanotube surface and one smooth hydrophobic surface. Surface …

Reducing Food Scarcity: The Benefits Of Urban Farming, S.A. Claudell, Emilio Mejia

Journal of Nonprofit Innovation

Urban farming can enhance the lives of communities and help reduce food scarcity. This paper presents a conceptual prototype of an efficient urban farming community that can be scaled for a single apartment building or an entire community across all global geoeconomics regions, including densely populated cities and rural, developing towns and communities. When deployed in coordination with smart crop choices, local farm support, and efficient transportation then the result isn’t just sustainability, but also increasing fresh produce accessibility, optimizing nutritional value, eliminating the use of ‘forever chemicals’, reducing transportation costs, and fostering global environmental benefits.

Imagine Doris, who is …

A Personal Tribute To Professor Ashok Midha, Larry L. Howell

Faculty Publications

When I received the news that Professor Ashok Midha had passed away, I was grieved by the unexpected news. But I also felt another emotion: gratitude for having known him. I am grateful for him, for the opportunity I had to learn from him, and for the influence he has had on my life and career. I wanted to honor his memory in some way. This document is in response to that desire.

Some of my thoughts at his passing are summarized in the first chapter and the conclusion. The other writing is taken from a draft of my personal …

Thermal Atomization On Superhydrophobic Surfaces Of Varying Temperature Jump Length, Eric D. Lee, Daniel Maynes, Julie Crockett, Brian D. Iverson

Faculty Publications

This paper presents an experimental study of drop impingement and thermal atomization on hydrophobic and superhydrophobic (SH) surfaces. Superhydrophobic surfaces having both microscale and nanoscale geometry are considered. Microscale SH surfaces are coated with a hydrophobic coating and exhibit micropillars and cavities which are classified using the surface solid fraction and center to center pitch. The solid fraction and pitch values explored in this study range from 0.05-1.0 and 8-60 μm respectively. Nanoscale textured surfaces are created by applying a blanket layer of carbon nanotubes. Both types of surfaces are further classified by a temperature jump length (λ …

Data And Cad Models Of Cyclic Testing Of Membrane Hinges For Use In Origami-Inspired Design, Mitchel Skinner

ScholarsArchive Data

The following includes results and CAD models of cyclic testing of membrane hinges for use in origami-inspired design. The results include the number of cycles until both visual damage and complete failure occurred in 7 different membrane materials. The CAD models of the testing setup are also included.

Dynamic Skin Strain Fields In The Lumbar Region During Functional Movement, Andrew Gibbons, Anton Bowden, Ulrike H. Mitchell, David T. Fullwood

Student Works

Increasing efforts to leverage skin mounted wearables has exposed a gap in our understanding of skin strain in the lumbar region. Lumbar skin is known to be both inhomogenous and anisotropic, and experiences dramatic material strain during activities of daily living (ADLs). Previous efforts to quantify strain fields during ADLs has been limited to a few activities (primarily flexion) and have neglected inhomogeneity or anisotropy. The purpose of the present work was to address this gap by measuring large-deformation skin strain tensors in healthy volunteers during a cadre of functional movements.

36 tightly packed retro-reflective markers were mounted to the …

Trumpet Directivity From A Rotating Semicircular Array, Samuel D. Bellows, Joseph E. Avila, Timothy W. Leishman

Directivity

The directivity function of a played musical instrument describes the angular dependence of its acoustic radiation and diffraction about the instrument, musician, and musician’s chair. Directivity influences sound in rehearsal, performance, and recording environments and signals in audio systems. Because high-resolution, spherically comprehensive measurements of played musical instruments have been unavailable in the past, the authors have undertaken research to produce and share such data for studies of musical instruments, simulations of acoustical environments, optimizations of microphone placements, and other applications. The authors acquired the data from repeated chromatic scales produced by a trumpet played at mezzo-forte in an anechoic …

Pectus Carinatum Patient Brace Data, Brandon Scott Sargent, Katie Varela, Dennis Eggett, Emily Mckenna, Christina Bates, Rebeccah Brown, Victor Garcia, Larry Howell

ScholarsArchive Data

Data for the journal article "Modeling of the chest wall response to prolonged bracing in pectus carinatum" submitted to PLOS One in 2023 by Sargent et al. The data is a recording of prescribed brace pressures, patient reported hours of wear, and clinician recorded pressure to correct through the treatment process. The data file was compiled via Microsoft Excel as part of the Microsoft 365 Office Suite. The top row of each sheet within the file is the header line with the data in all subsequent rows. The journal article contains an in-depth definition of the variables used in the …

User Guide For Urban Canopy Modeling In Wrf. Version 1.0, Corey L. Smithson, Natalie J. White, Hans R. Klomp, Eric C. Monson, Bradley R. Adams

Faculty Publications

Researchers at Brigham Young University (BYU) have developed this guide for running a WRF simulation using a single layer urban canopy model (UCM). This was developed specifically for the Greater Salt Lake Area but is adaptable to other urban areas. This guide includes information on running WRF simulations to study theoretical urban growth scenarios.

Vortex Particle Method For Electric Ducted Fan In Non-Axisymmetric Flow, Eduardo Alvarez, Cibin Joseph, Andrew Ning

Faculty Publications

The vortex particle method has been reformulated in recent work as a large eddy simulation (LES) in a scheme that is both meshless and numerically stable, solving long-standing issues of numerical stability. In this study, we build upon this meshless LES scheme to create a simulation framework for electric ducted fans. This poses the challenge of introducing solid boundaries in the vorticity form of the Navier-Stokes equations without a mesh. Rotor blades are introduced in our computational domain through an actuator line model (ALM) following well-established practices for LES. A novel, vorticity-based, actuator surface model (ASM) is developed for the …

Large Eddy Simulation For Empirical Modeling Of The Wake Of Three Urban Air Mobility Vehicles, Denis-Gabriel Caprace, Andrew Ning

Faculty Publications

Recent advances in urban air mobility have driven the development of many new VTOL concepts. These vehicles often feature original designs departing from the conventional helicopter configuration. Due to their novelty, the characteristics of the super-vortices forming in the wake of such aircraft are unknown. However, these vortices may endanger any other vehicle evolving in their close proximity, owing to potentially large induced velocities. Therefore, improved knowledge about the wakes of VTOL vehicles is needed to guarantee safe urban air mobility operations. In this work, we study the wake of three VTOL aircraft in cruise by means of large eddy …

A Model For Multi-Input Mechanical Advantage In Origami-Based Mechanisms, Jared Butler, Adam Shrager, Timothy Simpson, Landen Bowen, Mary Frecker, Robert Lang, Eric Wilcox, Paris Von Lockette, Larry L. Howell, Spencer P. Magleby

Faculty Publications

Mechanical advantage is traditionally defined for single input and single-output rigid-body mechanisms. A generalized approach for identifying single-output mechanical advantage for a multiple-input compliant mechanism, such as many origami-based mechanisms, would prove useful in predicting complex mechanism behavior. While origami-based mechanisms are capable of offering unique solutions to engi neering problems, the design process of such mechanisms is complicated by the interaction of motion and forces. This paper presents a model of the mechanical advantage for multi input compliant mechanisms and explores how modifying the parameters of a model affects their behavior. The model is used to predict the force-deflection …

Large Deflection Analysis Of General Beams In Contact-Aided Compliant Mechanisms Using Chained Pseudo-Rigid-Body Model, Mohui Jin, Collin Ynchausti, Xianmin Zhang, Zhou Yang, Benliang Zhu, Larry L. Howell

Faculty Publications

The nonlinear analysis and design of contact-aided compliant mechanisms (CCMs) are challenging. This paper presents a nonlinear method for analyzing the deformation of general beams that contact rigid surfaces in CCMs. The large deflection of the general beam is modeled by using the chained pseudo-rigid-body model. A geometry constraint from the contact surface is developed to constrain the beam’s deformed configuration. The contact analysis problem is formulated based on the principle of minimum potential energy and solved using an optimization algorithm. Besides, a novel technique based on the principle of work and energy is proposed calculate the reaction force/moment of …

Heat Set Creases In Polyethylene Terephthalate (Pet) Sheets To Enable Origami-Based Applications, Brandon Sargent, Nathan Brown, Brian D. Jensen, Spencer P. Magleby, William G. Pitt, Larry L. Howell

Faculty Publications

Polyethylene terephthalate (PET) sheets show promise for application in origami-based engineering design. Origami-based engineering provides advantages that are not readily available in traditional engineering design methods. Several processing methods were examined to identify trends and determine the effect of processing of PET sheets on the crease properties of origami mechanisms in PET. Various annealing times, temperatures, and cooling rates were evaluated and data collected for over 1000 samples. It was determined that annealing temperature plays the largest role in crease response. An increase in the crystallinity of a PET sheet while in the folded state likely increases the force response …