Mechanical Engineering Commons^™

Gradient-Based Trade-Off Design For Engineering Applications, Lena A. Royster, Gene Hou

Mechanical & Aerospace Engineering Faculty Publications

The goal of the trade-off design method presented in this study is to achieve newly targeted performance requirements by modifying the current values of the design variables. The trade-off design problem is formulated in the framework of Sequential Quadratic Programming. The method is computationally efficient as it is gradient-based, which, however, requires the performance functions to be differentiable. A new equation to calculate the scale factor to control the size of the design variables is introduced in this study, which can ensure the new design achieves the targeted performance objective. Three formal approaches are developed in this study for trade-off …

Optimal Domain-Partitioning Algorithm For Real-Life Transportation Networks And Finite Element Meshes, Jimesh Bhagatji, Sharanabasaweshwara Asundi, Eric Thompson, Duc T. Nguyen

Civil & Environmental Engineering Faculty Publications

For large-scale engineering problems, it has been generally accepted that domain-partitioning algorithms are highly desirable for general-purpose finite element analysis (FEA). This paper presents a heuristic numerical algorithm that can efficiently partition any transportation network (or any finite element mesh) into a specified number of subdomains (usually depending on the number of parallel processors available on a computer), which will result in “minimising the total number of system BOUNDARY nodes” (as a primary criterion) and achieve “balancing work loads” amongst the subdomains (as a secondary criterion). The proposed seven-step heuristic algorithm (with enhancement features) is based on engineering common sense …

Novel Approach For Non-Invasive Prediction Of Body Shape And Habitus, Emma Young

Electronic Theses and Dissertations

While marker-based motion capture remains the gold standard in measuring human movement, accuracy is influenced by soft-tissue artifacts, particularly for subjects with high body mass index (BMI) where markers are not placed close to the underlying bone. Obesity influences joint loads and motion patterns, and BMI may not be sufficient to capture the distribution of a subject’s weight or to differentiate differences between subjects. Subjects in need of a joint replacement are more likely to have mobility issues or pain, which prevents exercise. Obesity also increases the likelihood of needing a total joint replacement. Accurate movement data for subjects with …

Patient Movement Monitoring Based On Imu And Deep Learning, Mohsen Sharifi Renani

Electronic Theses and Dissertations

Osteoarthritis (OA) is the leading cause of disability among the aging population in the United States and is frequently treated by replacing deteriorated joints with metal and plastic components. Developing better quantitative measures of movement quality to track patients longitudinally in their own homes would enable personalized treatment plans and hasten the advancement of promising new interventions. Wearable sensors and machine learning used to quantify patient movement could revolutionize the diagnosis and treatment of movement disorders. The purpose of this dissertation was to overcome technical challenges associated with the use of wearable sensors, specifically Inertial Measurement Units (IMUs), as a …

Neuroevolution Application To Collaborative And Heuristics-Based Connected And Autonomous Vehicle Cohort Simulation At Uncontrolled Intersection, Frederic Jacquelin, Jungyun Bae, Bo Chen, Darrell Robinette

Michigan Tech Publications

Artificial intelligence is gaining tremendous attractiveness and showing great success in solving various problems, such as simplifying optimal control derivation. This work focuses on the application of Neuroevolution to the control of Connected and Autonomous Vehicle (CAV) cohorts operating at uncontrolled intersections. The proposed method implementation’s simplicity, thanks to the inclusion of heuristics and effective real-time performance are demonstrated. The resulting architecture achieves nearly ideal operating conditions in keeping the average speeds close to the speed limit. It achieves twice as high mean speed throughput as a controlled intersection, hence enabling lower travel time and mitigating energy inefficiencies from stop-and-go …

Importance Of Vegetation In Tsunami Mitigation: Evidence From Large Eddy Simulations With Fluid-Structure Interactions, Abhishek Mukherjee

Dissertations

Communities worldwide are increasingly interested in nature-based solutions like coastal forests for the mitigation of coastal risks. Still, it remains unclear how much protective benefit vegetation provides, particularly in the limit of highly energetic flows after tsunami impact. The present thesis, using a three-dimensional incompressible computational fluid dynamics model with a fluid-structure interaction approach, aims to quantify how energy reflection and dissipation vary with different degrees of rigidity and vegetation density of a coastal forest.

In this study, tree trunks are represented as cylinders, and the elastic modulus of hardwood trees such as pine or oak is used to characterize …

Photonic Sensors Based On Integrated Ring Resonators, Jaime Da Silva

Mechanical Engineering Research Theses and Dissertations

This thesis investigates the application of integrated ring resonators to different sensing applications. The sensors proposed here rely on the principle of optical whispering gallery mode (WGM) resonance shifts of the resonators. Three distinct sensing applications are investigated to demonstrate the concept: a photonic seismometer, an evanescent field sensor, and a zero-drift Doppler velocimeter. These concepts can be helpful in developing lightweight, compact, and highly sensitive sensors. Successful implementation of these sensors could potentially address sensing requirements for both space and Earth-bound applications. The feasibility of this class of sensors is assessed for seismic, proximity, and vibrational measurements.

Du Undergraduate Showcase: Research, Scholarship, And Creative Works, Caitlyn Aldersea, Justin Bravo, Sam Allen, Anna Block, Connor Block, Emma Buechler, Maria De Los Angeles Bustillos, Arianna Carlson, William Christensen, Olivia Kachulis, Noah Craver, Kate Dillon, Muskan Fatima, Angel Fernandes, Emma Finch, Colleen Cassidy, Amy Fishman, Andrea Francis, Stacia Fritz, Simran Gill, Emma Gries, Rylie Hansen, Shannon Powers, Jacqueline Martinez, Zachary Harker, Ashley Hasty, Mykaela Tanino-Springsteen, Kathleen Hopps, Adelaide Kerenick, Colin Kleckner, Ci Koehring, Elijah Kruger, Braden Krumholz, Maddie Leake, Lyneé Alves, Seraphina Loukas, Yatzari Lozano Vazquez, Haley Maki, Emily Martinez, Sierra Mckinney, Audrey Mitchell, Kipling Newman, Audrey Ng, Megan Lucyshyn, Andrew Nguyen, Stevie Ostman, Casandra Pearson, Alexandra Penney, Julia Gielczynski, Tyler Ball, Anna Rini, Christina Rorres, Simon Ruland, Helayna Schafer, Emma Sellers, Sarah Schuller, Claire Shaver, Kevin Summers, Isabella Shaw, Madison Sinar, Claudia Pena, Apshara Siwakoti, Carter Sorensen, Madi Sousa, Anna Sparling, Alexandra Revier, Brandon Thierry, Dylan Tyree, Maggie Williams, Lauren Wols

DU Undergraduate Research Journal Archive

DU Undergraduate Showcase: Research, Scholarship, and Creative Works

The Future Is Now In Twisted Coil Polymer Actuators (Tcpa), Ryan Ronquillo

Electronic Theses and Dissertations

This thesis aimed to fabricate and test twisted coiled polymer actuators (TCPA) to understand the mechanical and thermal aspects of this artificial muscle fiber. The purpose of this thesis was to find a linear relationship using the LVDT sensor, fabricating TCPA fibers, and interpreting the data. The project tested whether nylon/polymer could be used as a better artificial muscle fiber.

This research accomplished three goals: (1) designing and fabricating a system capable of creating supercoiled muscle fibers consistently, (2) calibrating the Linear Variable Differential Transformer (LVDT) and Core, and (3) analyzing/interpreting the data of the Twisted Coiled Polymer Actuators (TCPA) …

Fabrication Of Solid Oxide Fuel Cell Components Using Stereolithography 3d Printing, Hannah Dyer

Mechanical & Aerospace Engineering Theses & Dissertations

Transitioning from fossil fuel supplied energy to renewable technology must meet cost efficient parameters throughout the manufacturing process while possessing the characteristics of a functioning and reliable power source. With a significant demand in renewable energy products, developmental techniques require adaptive approaches and procedures for novel materials in the manufacturing phase. This report proposes how a solid oxide fuel cell (SOFC), a renewable energy system, can employ additive manufacturing for directly 3D printing its components by utilizing stereolithography (SLA) 3D printing techniques. Fabrication of the printed components from the mixtures were first mixed with varying concentrations of ceramic powder and …

Using Immersive Technology To Improve Mechanical Design: Use Cases, A Review Of Current Technology, And An Experiment In Requirement Elicitation In Virtual Reality, William Hawthorne

All Theses

There has been a growing trend in the use of immersive technologies within engineering design. This research is focused on understanding how Virtual Reality (VR) technologies support design reviews. Modern tools including virtual reality hardware and software were tested for current capabilities and challenges. In a review of literature, two key gaps are identified: the rapid advancements of VR and AR technology and limited formal studies to determine the costs and benefits of immersive technology within engineering design reviews. This research has resulted in three key outcomes. First, use cases of immersive reality technologies are identified, through the lens of …

Trace Dna Detection Using Diamond Dye: A Recovery Technique To Yield More Dna, Leah Davis

Master's Theses

This study aspires to find a new screening approach to trace DNA recovery techniques to yield a higher quantity of trace DNA from larger items of evidence. It takes the path of visualizing trace DNA on items of evidence with potential DNA so analysts can swab a more localized area rather than attempting to recover trace DNA through the general swabbing technique currently used for trace DNA recovery. The first and second parts consisted of observing trace DNA interaction with Diamond Dye on porous and non-porous surfaces.

The third part involved applying the Diamond Dye solution by spraying it onto …

Machine Learning-Based Data And Model Driven Bayesian Uncertanity Quantification Of Inverse Problems For Suspended Non-Structural System, Zhiyuan Qin

All Dissertations

Inverse problems involve extracting the internal structure of a physical system from noisy measurement data. In many fields, the Bayesian inference is used to address the ill-conditioned nature of the inverse problem by incorporating prior information through an initial distribution. In the nonparametric Bayesian framework, surrogate models such as Gaussian Processes or Deep Neural Networks are used as flexible and effective probabilistic modeling tools to overcome the high-dimensional curse and reduce computational costs. In practical systems and computer models, uncertainties can be addressed through parameter calibration, sensitivity analysis, and uncertainty quantification, leading to improved reliability and robustness of decision and …

Metastability And Degradation In Cu(In,Ga)Se2 Thin-Film Solar Cells, Mohsen Jahandardoost

UNLV Theses, Dissertations, Professional Papers, and Capstones

Cu(In,Ga)(S,Se)2 or CIGS is a thin-film semiconductor that has shown a device efficiency of 23.35% and 24.2% for single-junction and perovskite/CIGS tandem solar cells, respectively. CIGS offers promising properties such as tunable bandgap and ease of processing making them great candidates for thin-film tandem devices. However, knowledge of the effect of material defects, buffer materials, and post-deposition treatment (PDT) on degradation and metastability behavior in these devices is not well understood.In this dissertation, metastability and long-term degradation of CIGS thin-film solar cells have been investigated under combinatorial stress factors of heat, light, and voltage bias to systematically understand the effect …

Super P-Sulfur Cathodes For Quasi-Solid-State Lithium-Sulfur-Batteries., Milinda Bharatha Kalutara Koralalage

Electronic Theses and Dissertations

Lithium-Sulfur (Li-S) batteries have become a promising candidate to meet the current energy storage demand, with its natural abundance of materials, high theoretical capacity of 1672 mAhg-1, high energy density of 2600 Whkg-1, low cost and lower environmental impact. Sulfide based solid state electrolytes (SSEs) have received greater attention due to their higher ionic conductivity, compatible interface with sulfur-based cathodes, and lower grain boundary resistance. However, the interface between SSEs and cathodes has become a challenge in all solid-state Li-S batteries due to the rigidity of the participating surfaces. A hybrid electrolyte containing SSE coupled with a small amount of …

Modeling, Simulation And Control Of Microrobots For The Microfactory., Zhong Yang

Electronic Theses and Dissertations

Future assembly technologies will involve higher levels of automation in order to satisfy increased microscale or nanoscale precision requirements. Traditionally, assembly using a top-down robotic approach has been well-studied and applied to the microelectronics and MEMS industries, but less so in nanotechnology. With the boom of nanotechnology since the 1990s, newly designed products with new materials, coatings, and nanoparticles are gradually entering everyone’s lives, while the industry has grown into a billion-dollar volume worldwide. Traditionally, nanotechnology products are assembled using bottom-up methods, such as self-assembly, rather than top-down robotic assembly. This is due to considerations of volume handling of large …

An Exploration Of The Application Of Desalination In Disaster Relief, Emma Sager

Senior Honors Theses

This paper aims to explore the application of small-scale desalination systems to provide clean water in the wake of marine natural disasters. A lack of clean water is a devastating impact of many natural disasters. Desalination technologies, both thermal and membrane, show potential for being scaled down and self-powered by renewable energy. Desalination can transform ocean water and contaminated drinking water with a high salt content into drinkable, usable water. While these techniques are not perfected, and the solution to a need for clean water is multifaceted, desalination shows potential. Through further research and ever-advancing technology, small-scale desalination could develop …

Rattus Norvegicus As A Biological Detector Of Clandestine Remains And The Use Of Ultrasonic Vocalizations As A Locating Mechanism, Gabrielle M. Johnston

Master's Theses

In investigations, locating missing persons and clandestine remains are imperative. One way that first responder and police agencies can search for the remains is by using cadaver dogs as biological detectors. Cadaver dogs are typically used due to their olfactory sensitivity and ability to detect low concentrations of volatile organic compounds produced by biological remains. Cadaver dogs are typically chosen for their stamina, agility, and olfactory sensitivity. However, what is not taken into account often is the size of the animal and the expense of maintaining and training the animal. Cadaver dogs are typically large breeds that cannot fit in …

The Characterization Of Atmospheric Turbulence And Its Effect On Laser Beam Propagation, Michael Cox

All Theses

Having a controlled environment to measure atmospheric turbulence is essential to understanding its effects on different laser beam characteristics. The Clemson Variable Turbulence Generator (VTG) has the capability to propagate a laser beam up to 100 m and be able to dial many turbulence settings up to a heat flux of 357 W/m². A high-speed camera, power detector, and high-resolution temperature probes characterize the VTG with theoretical turbulence spectrums. The exponent associated with the Rayleigh-Bénard (RB) temperature structure constant equation is studied. Two different laser beam profiles are used throughout this work: Gaussian and Asymmetric Perfect Vortex (APV). …

A One-Dimensional Analysis Of A Microbial Fuel Cell For Efficient Acetate Removal And Power Density Output, David Rouhani

UNLV Theses, Dissertations, Professional Papers, and Capstones

Microbial fuel cells (MFCs) are electrochemical devices that utilize microorganisms to convert organic matter into electrical energy. MFCs have been discussed to have potential application for sustainable wastewater treatment due to their ability to generate electricity while simultaneously treating contaminated water. To optimize MFC performance, numerical models can be used to understand the complex electrochemical and biological processes occurring in the system. In this study, a numerical model was developed to simulate the performance of MFCs under varying operating conditions and to investigate the performance of a MFC for treating wastewater fuel. More specifically, the MFC was modeled to oxidize …

Optical Fiber Tip Micro Anemometer, Jeremiah C. Williams, Hengky Chandrahalim

AFIT Patents

A passive microscopic flow sensor includes a three-dimensional microscopic optical structure formed on a cleaved tip of an optical fiber. The three-dimensional microscopic optical structure includes a post attached off-center to and extending longitudinally from the cleaved tip of the optical fiber. A rotor of the three-dimensional microscopic optical structure is received for rotation on the post. The rotor has more than one blade. Each blade has a reflective undersurface that reflects a light signal back through the optical fiber when center aligned with the optical fiber, the blades of the rotor shaped to rotate at a rate related to …

Rubber Band Car Activity, Admin Stem For Success, Natalie Wilson

STEM for Success Showcase

Student learn about forces and engineering by designing a car powered by rubber bands

Sharprazor: Automatic Removal Of Hair And Ruler Marks From Dermoscopy Images, Reda Kasmi, Jason Hagerty, Reagan Harris Young, Norsang Lama, Januka Nepal, Jessica Miinch, William V. Stoecker, R. Joe Stanley

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Background: The removal of hair and ruler marks is critical in handcrafted image analysis of dermoscopic skin lesions. No other dermoscopic artifacts cause more problems in segmentation and structure detection. Purpose: The aim of the work is to detect both white and black hair, artifacts and finally inpaint correctly the image. Method: We introduce a new algorithm: SharpRazor, to detect hair and ruler marks and remove them from the image. Our multiple-filter approach detects hairs of varying widths within varying backgrounds, while avoiding detection of vessels and bubbles. The proposed algorithm utilizes grayscale plane modification, hair enhancement, segmentation using tri-directional …

Hydrothermal Liquefaction Of Saccharina Latissima For The Production Of Biofuel, Mayokun A. Oke

Mechanical Engineering Theses

We performed hydrothermal liquefaction of brown macroalga (Saccharina latissima) in the presence of homogenous and heterogenous catalysts such as KOH, Na₂CO₃, Pd/C, HZSM-5, Ce/HZSM-5, and Ni/SiO₂-Al₂O₃ in hot compressed water, to investigate their effects on product yield and composition in the biocrude. To investigate hydrocarbon production, we used methanol as co-solvent (methanol-to-water 1/4 vol.%) and as the only liquefaction solvent. We carried out the experiments in a batch reactor at 330^oC and 120-130 bar, and varying temperature, algae-to-water ratio, residence time, and pretreatment method. The biocrude yields …

Effects Of Various Dietary Carbohydrate Sources On The Growth Performance And Body Composition Of The Dog Conch, Laevistrombus Canarium, Jen-Hong Chu

Journal of Marine Science and Technology–Taiwan

This study investigates the effects of dietary supplementation with various carbohydrate sources on the growth and dietary nutrient utilization efficiency of a 0.72-g dog conch, Laevistrombus canarium. Five treatment diets had supplementation with alpha-starch (Sta), dextrin (Dex), pullulan gum (Pg), xanthan gum (Xg), and carboxymethyl cellulose (CMC). At the end of the feeding trial, the best growth performance (weight gain, 442.23%) and diet efficiency (protein efficiency ratio, 1.25, and feed conversion ratio [FCR], 2.04) were exhibited by the dog conch fed the Sta diet, whereas the lowest growth performance was observed in the dog conch fed the Xg and CMC …

Cost Advantages Of Far East/Europe Trunk Route Deployment With Port Selection In East Asia, Tai Hui-Huang, Chang Chin-Wei

Journal of Marine Science and Technology–Taiwan

To cater to the gradually increasing sizes of ships, several traditional container ports in East Asia built deep-water wharves to attract shipping carriers to berth, a decision that is considered highly reasonable because it allows for shipping carriers to gain a cost advantage. For traditional Far East/Europe (F/E) trunk routes, shipping carriers must deploy vessels that are large enough at hub ports to maintain low transshipment costs. However, for a port to attract shipping carriers, it should be able to first meet the cargo demand of these carriers. The port would also need to improve the loading ratio to enjoy …

Influence Of Vacuum Condition On Rapid Chloride Migration (Rcm) Test For Chloride Penetration Resistance Of Concrete, Chih-Yen Lin, Chun-Fu Chang, Chung-Chia Yang

Journal of Marine Science and Technology–Taiwan

NT Build 492 regulates that the pressure be set at 7.5–37.5 torr and be maintained for 3 h for vacuum processing. This large range of acceptable vacuum pressure is awkward for research, and 3 h of pump-down time may be excessive. In this study, vacuum conditions were divided into vacuum pressure and pump-down time groups: various vacuum pressures and pump-down times were used to preprocess specimens to explore the effect of vacuum conditions on the RCM test. The salt ponding test was also conducted to identify the optimal vacuum conditions. It is shown that the relationship between vacuum pressure and …

Exhaust Noise Elimination Using Silencers Fortified With Perforated Tubes, Extended Tubes, Penetrable Resin Inlet And Orifice Plate, Min-Chie Chiu, Ho-Chih Cheng

Journal of Marine Science and Technology–Taiwan

Pneumatic equipment in marine diesel engine and associated piping system often emit extremely high level of noises when releasing pressure. Concerning the crew’s hearing health, discovering an efficient noise silencing device becomes essential. A silencer fortified with extended tubes, perforated tubes, orifice plate, and penetrable resin inlet is presented in order to competently dampen the blown-up noises. A simplified objective function by means of FEM, Artificial Neural Networks (ANNs), and a Genetic Algorithm (GA) is established to enable the numerical calculation when using a finite element method. Three silencer designs, silencer A (with element A, a penetrable resin inlet), B …

Deep Learning–Based, Oceantdlx Sea Ice Detection Model For Sar Image, Liu Lin, Li Wanwu, Li Hang, Sun Yi

Journal of Marine Science and Technology–Taiwan

This study constructs four deep-learning OceanTDLx series models and uses a WinR-AdaGrad gradient descent algorithm to train and optimize the constructed models. Through an analysis of the loss, accuracy, and time consumption of the four models (i.e., OceanTDL2, OceanTDL3, OceanTDL5 and OceanTDL8), we reveal that the models’ performance does not improve when the number of layers is increased and that OceanTDL5 provides the optimal performance. OceanTDL5 is compared with OceanTDA9 (a model that we previously constructed), and the curves for training loss_batch and training accuracy_batch indicate that OceanTDL5 is more suitable than OceanTDA9 for detecting distributed targets, particularly semi-melted sea …

Application Of Unmanned Aerial Vehicle–Based Infrared Images In Determining Characteristics Of Sea Surface Temperature Distribution, Hsing-Yu Wang, Hui-Ming Fang, Yun-Chih Chiang

Journal of Marine Science and Technology–Taiwan

This study investigated the temperature field of a body of water by using rotary-wing unmanned aerial vehicles (DJI Mavic 2 Enterprise Dual) comprising visible light and infrared cameras to determine sea temperature distribution. With a flight height of 150 m, image overlap of 80%, and image resolution of 4.75 cm/pixel, the proposed method was more effective than the conventional portable conductivity–temperature–depth device in rapidly measuring sea surface temperature and determining sea temperature distribution. The discharged heated water of the Hoping Power Plant traveled 100–330 m from the wastewater outfall and then gradually diffused in the range of 100–490 m before …