Mechanical Engineering Commons^™

Test 1681: John Deere 7400 Powrquad Diesel 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE

General

Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure.

The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1684: Agco Allis 9690 Diesel 18-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE

General

Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure.

The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1685: White 6175 Diesel 18-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE

General

Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure.

The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

A Fringe Center Detection Technique Based On A Sub-Pixel Resolution, And Its Applications Using Sinusoidal Gratings, Ming Chang, Paul P. Lin, Wen Chih Tai

Mechanical Engineering Faculty Publications

A common problem in optical profilometry is the accuracy in locating fringe centers. This paper presents an accurate fringe center detection technique based on sub-pixel resolution using the fringe projection method. An optimum reconstruction filter is developed which has low sensitivity to noise. In fringe center detection, computer simulation results of using one-pixel and sub-pixel resolutions are compared. The detection technique is then applied to radius measurement of cylindrical objects and surface profile measurement of diffuse objects. The experimental results thus obtained through the proposed optimum reconstruction filter show significant improvement in measurement accuracy.

Test 1677: White 6145 Diesel 18-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1682: Case International 7220 Diesel 18-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE

General

Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure.

The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Development Of Strength Theories For Random Fiber Composites, Victor Giurgiutiu

Faculty Publications

A ressessment of existing theories for calculating the strength of random and quasi-random fiber composites is presented. Fundamental aspects regarding the physical model, macromechanics analysis, fiber distribution functions, generalized failure criterion, and progressive versus sudden failure models are covered first. Progressive ductile failure, progressive brittle failure, and sudden brittle failure are treated in detail. In each case, the original theory is briefly reviewed, and then its extensions accompanied by numerical examples are presented. Several limitations originally imposed by Hahn, such as the monotonically nonincreasing requirement on the failure strain curve, are lifted and the mathematical formulations are generalized. Some common …

Multigrid Acceleration Of Time-Dependent Solutions Of Navier-Stokes Equations, Sarafa Oladele Ibraheem

Mechanical & Aerospace Engineering Theses & Dissertations

Recent progress in Computational Fluid Dynamics is encouraging scientists to look at fine details of flow physics of problems in which natural unsteady phenomena have hitherto been neglected. The acceleration methods that have proven very successful in steady state computations can be explored for time dependent computations. In this work, an efficient multigrid methods is developed to solve the time-dependent Euler and Navier-Stokes equations. The Beam-Warming ADI method is used as the base algorithm for time stepping calculations. Application of the developed algorithm proved very efficient in selected steady and unsteady test problems. For instance, the inherent unsteadiness present in …

Study Of Single-Fiber Fiber Optic Lever Microphone, Trung Duc Nguyen

Electrical & Computer Engineering Theses & Dissertations

Fiber optic sensors are widely used in today's technological applications, providing many advantages that conventional sensors lack. In particular, there is a demand in hypersonic applications to develop microphones to measure acoustic pressure that performs in high temperature and noisy surroundings. This thesis analyzes fiber optic lever microphones (FOLM), since they perform at high temperatures. An FOLM system is an intensity modulated sensor, which is simple to implement and is small in size. Two models of the FOLM have been fabricated and calibrated. The first model uses a seven-element fiber array while the second uses a single-fiber to transmit and …

Three-Dimensional Transport Simulations Of The Dispersal Of Volcanic Aerosol From Mount Pinatubo, T. Duncan A. Fairlie

Mechanical & Aerospace Engineering Theses & Dissertations

A global finite-difference model that simulates the large-scale dynamics of the Earth's stratosphere and mesosphere is combined with a global spectral transport model to investigate aspects of the initial dispersal of the volcanic aerosol plume from the Mount Pinatubo eruption in 1991. Results of the modelling study are found to compare well with observations of the volcanic plume made from satellite instruments. Dynamical quantities, diagnosed from the simulated fields are used to provide insight into the evolution of the volcanic plume. Lagrangian trajectory analysis is used to help assess the performance of the Eulerian transport model and to highlight small-scale …

A Study Of The Interface Between A Turbulent Boundary Layer And The Irrotational Free Stream, Shih-Chao Lin

Mechanical & Aerospace Engineering Theses & Dissertations

A mathematical model has been developed to simulate the events which occur at the interface between a turbulent boundary layer and the irrotational free stream. By assuming the streamwise velocity component of this interface to be constant and that the interface is uncontorted initially, the solution to the equations of motion is used to derive the position functions of a point element on the interface. This analysis is restricted to a fully developed incompressible turbulent boundary layer with zero pressure gradient. Vertical velocity disturbances which are periodic in the spanwise direction and restricted to small streamwise domains are assumed.

The …

Motorized Throttle Plate, John D. Crawford

Opportunities for Undergraduate Research Experience Program (OURE)

The objective of this project was to develop a throttle plate mechanism that can be used to simulate transient engine operation. This throttle plate was designed so as to regulate the quantity of air flow entering a Port Fuel Injected (PFI) spark ignition engine prior to the combustion of the fuel-air mixture. The throttle plate is linked to a data acquisition system in order to study the port fuel injection characteristics of the fuel-air mixture. This data acquisition system links the throttle plate angular position information to data obtained using a nonintrusive laser based diagnostic technique, therefore enabling the study …

Performance Analysis For The Ccn Collection Apparatus, Deborah K. Bircher

Opportunities for Undergraduate Research Experience Program (OURE)

This paper concerns the performance testing of a system to collect and chemically analyze cloud condensation nuclei (CCN). These are the atmospheric particles which nucleate cloud drops.

The air is humidified by passage through the "haze chamber", consisting of parallel vertical plates that are covered with cotton cloth and are kept wet by water supplied at the top edge. The plates are adiabatic , and should equilibrate in temperature at the wet bulb temperature of the incoming air. Measurements of the plate temperature with eighty thermocouples indicate behavior consistent with theory.

Another part of the system is called the CFD …

Two Methods For Attenuation Of Vibration In Structures, Kevin Mark Mcclendon

Opportunities for Undergraduate Research Experience Program (OURE)

The purpose of this report is to discuss methods of suppressing vibration in space trusses. The discussion is centered on the approach, structural attributes, and effectiveness of each method. One approach uses structural active members which are actuated to produce “anti-vibration” to cancel vibrations in the truss. The other method is to implement passive and active damping devices at the base of the space truss, where it will absorb vibrations by fluctuating the stiffness of the structures foundation.

Damage Assessment Of Composite Structures With Embedded Optical Fibers, Peter E. Hackett

Opportunities for Undergraduate Research Experience Program (OURE)

One of the important features of smart composite structures is their capability to observe their own performance for proper functioning and self-diagnostic purposes. The low velocity impact damage of composite structures (matrix cracking, fiber breakage, delamination, etc.) is often difficult to detect visually and can significantly reduce the strength of the structure. The objective of this research is to develop a technique for fabricating composite laminates that will facilitate the embedment of optical fibers. Composite test specimens will be fabricated in the composite material laboratory. The fabrication of composite laminates with a health monitoring and damage assessment system capable of …

Active Buckling Control Of Composite Plates, Bradley Wayne Gentelin

Opportunities for Undergraduate Research Experience Program (OURE)

The objective of the research project is to investigate the feasibility of using the rapidly growing technology of smart materials in actively controlling the buckling of laminated composite plates. Advanced composite structures are susceptible to structural instabilities under compression loadings, and the proper control of such instabilities is essential to the effective performance of the structures. The focus of the research activity is to perform an experimental study of using embedded piezoelectric materials for enhancing the critical buckling loads of laminated composite plates. The forces induced by the piezoelectric actuators under the applied voltage fields will be used to counterbalance …

Catalysis Of Charcoal Emissions, James M. Horak

Opportunities for Undergraduate Research Experience Program (OURE)

This paper is about the development of a system to reduce the emissions of charcoal kilns with the catalyst from automotive catalytic converters. This device, called the charcoal kiln emissions oxidizer (CKEO), was designed and fabricated to meet the goal of a cost effective means to reduce the carbon monoxide and hydrocarbon emissions from charcoal kilns. Testing of the CKEO was never carried out as a test site could not be secured by this writing. The need for the CKEO, the theory behind it, and a procedure to test it are presented.

Soil Sampling Made Easier, Mike Bolland, Mike Baker

Journal of the Department of Agriculture, Western Australia, Series 4

A new rotary blade soil sampler has taken the hard work out of collecting soil samples from Western Australia's hard-setting soils to test for soil phosphorus levels .

Conceived and developed by Department of Agriculture technical officer Mike Baker, it should enable soil testing to be more widely adopted. Fortunately, the soil calibration tests that were developed using pogo samples can also be used for the new sampler.

Test 1667: John Deere 7700 Powershift Diesel 19-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1497/3: Same Argon 50 Vdt/Agco Allis 5650 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1501/3: Same Argon 60 Vdt/Agco Allis 5660 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Nebraska Summary: S172 Massey Ferguson 3120t, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S142 Case-Ih 5220, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S143 Case-Ih 5230, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S144 Case-Ih 5240, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S299 Agco Allis 5660, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S298 Agco Allis 5650, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 1670: John Deere 8570 Powersync Diesel 12 And 24 Speeds, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

A Magnetic Suspension System With A Large Angular Range, Colin P. Britcher, Mehran Ghofrani

Mechanical & Aerospace Engineering Faculty Publications

In order to explore and develop technology required for the magnetic suspension of objects over large ranges of orientation, a small-scale laboratory system, the large-angle magnetic suspension test fixture (LAMSTF) has been constructed at NASA Langley Research Center. This apparatus falls into the category of large-gap, actively stabilized magnetic levitation systems. The hardware comprises five conventional electromagnets in a circular arrangement, each driven from a separate bipolar power amplifier. Electromagnet currents are commanded by a digital control system, implemented on a microcomputer, which in turn derives the position and attitude of the suspended element from an infrared optical system. The …

Test 1672: John Deere 8870 Powersync Diesel 12 And 24 Speeds, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …