Mechanical Engineering Commons^™

A Three-Dimensional, Time-Dependent Circulation Model Of Utah Lake, Eric V. Callister

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Spatial and temporal variations of Utah Lake’s flow field were modeled using the Estuary Lake and Computer Model from the Centre for Water Research (CWR-ELCOM) at the University of Western Australia as part of an effort to increase understanding of the lake’s natural processes in order to restore the lake to its pristine, clear-water state and preserve the habitat of the June sucker, an endangered species. The model was validated using temperature measurements taken by sensors in 2007. The water temperature was a strong function of air temperature and incident short wave radiation, and was influenced to a lesser degree …

Localised Galvanic Corrosion Processes In Thermal Spray Coated/Cast Aluminium Alloy Systems, David Culliton, Tony Betts, David Kennedy

Conference Papers

Cast Aluminium Alloys, because of the propensity of aluminium to react with impurities and alloying elements, are prone to developing IM impurities during the solidification process. These IM phases can act, in some fluids, as initiation sites for localised corrosion processes, resulting in degradation phenomena, such as pitting. Whilst Thermal Spray coatings can improve the wear resistance of Cast Aluminium Alloys, their corrosion performance may be hampered by the presence of through porosity within the coating.

The present work details some preliminary studies of the localised corrosion processes occurring at the interface area between a Thermal Spray coating and a …

Three-Dimensional Modeling Of The Plasma Arc In Arc Welding, Gu Xu, J. Hu, Hai-Lung Tsai

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Most previous three-dimensional modeling on gas tungsten arc welding (GTAW) and gas metal arc welding (GMAW) focuses on the weld pool dynamics and assumes the two-dimensional axisymmetric Gaussian distributions for plasma arc pressure and heat flux. In this article, a three-dimensional plasma arc model is developed, and the distributions of velocity, pressure, temperature, current density, and magnetic field of the plasma arc are calculated by solving the conservation equations of mass, momentum, and energy, as well as part of the Maxwell's equations. This three-dimensional model can be used to study the nonaxisymmetric plasma arc caused by external perturbations such as …

Progress Toward Meeting The Challenges Of Our Coastal Urban Future, Juile Pullen, Jason Ching, David J. Sailor, William Thompson, Bob Bornstein, Darko Koracin

Mechanical and Materials Engineering Faculty Publications and Presentations

The article provides information on the Seventh Conference on Coastal Atmospheric and Oceanic Prediction and Processes, and the Seventh Symposium on the Urban Environment in San Diego, California on September 9-13, 2008. Topics include the heterogeneity of urban areas, coastal vulnerabilities, urban planning, and emergency response modeling. The conference featured several speakers including Walter Dabberdt and James Voogt.

Numerical Simulation Of Thermo-Elasticity, Inelasticity And Rupture Inmembrane Theory, Michael Taylor

Mechanical Engineering

Two distinct two-dimensional theories for the modeling of thin elastic bodies are developed. These are demonstrated through numerical simulation of various types of membrane deformation. The work includes a continuum thermomechanics-based theory for wrinkled thin films. The theory takes into account single-layer sheets as well as composite membranes made of multiple lamina. The resulting model is applied to the study of entropic elastic elastomers as well as Mylar/aluminum composite films. The latter has direct application in the area of solar sails. Several equilibrium deformations are illustrated numerically by applying the theory of dynamic relaxation to a finite difference discretization based …

Virtualization Of Physical Experiments Using Real-Time Data Generation From A Computational Fluid Dynamics Code, Kaustubh A. Dharwadkar

Mechanical & Aerospace Engineering Theses & Dissertations

This work presents a methodology for mapping physical experiments into real-time, web-based virtual experiments. The four broad elements included in the physical-to-virtual experiment transformation methodology are: (a) computer solution of conservation equations of mass and momentum to generate velocity and pressure (virtual) data that serve as the foundation for recreating the physical phenomenon in the virtual domain; (b) use of virtual pressure and velocity sensing devices to generate signals or readings from computed virtual data that can be observed and read on a computer screen; (c) use of visualization software such as Macromedia FLASH to create a highly interactive environment …

2008 Fall Engr333 Project Assignment, Matthew K. Heun

ENGR 333

The Fall 2008 semester ENGR333 project assessed the feasibility of a Green Revolving Fund for Calvin College. I asked the students “What would it take to implement a Calvin Energy Efficiency Fund (CEEF)?”

The project emerged from the work of the previous year’s students who uncovered the concept of green revolving funds.

Immediately after the Fall 2008 semester, I went on sabbatical to South Africa for all of 2009. While I was away, the Calvin administration established the Calvin Energy Recovery Fund (CERF). Over the next decade, CERF saved hundreds of thousands of dollars in energy costs and was …

Deep Sea Underwater Robotic Exploration In The Ice-Covered Arctic Ocean With Auvs, Clayton Kunz, Chris Murphy, Richard Camilli, Hanumant Singh, John Bailey, Ryan M. Eustice, Chris Roman, Michael Jakuba, Claire Willis, Taichi Sato, Ko-Ichi Nakamura, Robert A. Sohn

Graduate School of Oceanography Faculty Publications

The Arctic seafloor remains one of the last unexplored areas on Earth. Exploration of this unique environment using standard remotely operated oceanographic tools has been obstructed by the dense Arctic ice cover. In the summer of 2007 the Arctic Gakkel Vents Expedition (AGAVE) was conducted with the express intention of understanding aspects of the marine biology, chemistry and geology associated with hydrothermal venting on the section of the mid-ocean ridge known as the Gakkel Ridge. Unlike previous research expeditions to the Arctic the focus was on high resolution imaging and sampling of the deep seafloor. To accomplish our goals we …

Predicting The Longevity Of Dvdr Media By Periodic Analysis Of Parity, Jitter, And Ecc Performance Parameters, Daniel Patrick Wells

Theses and Dissertations

For the last ten years, DVD-R media have played an important role in the storage of large amounts of digital data throughout the world. During this time it was assumed that the DVD-R was as long-lasting and stable as its predecessor, the CD-R. Several reports have surfaced over the last few years questioning the DVD-R's ability to maintain many of its claims regarding archival quality life spans. These reports have shown a wide range of longevity between the different brands. While some DVD-Rs may last a while, others may result in an early and unexpected failure. Compounding this problem is …

A Finite Difference Method For Studying Thermal Deformation In Three-Dimensional Thin Films Exposed To Ultrashort Pulsed Lasers, Suyang Zhang

Doctoral Dissertations

Thermal analysis related to ultrashort-pulsed lasers has been intensely studied in science and engineering communities in recent years, because the pulse duration of ultrashort-pulsed lasers is only the order of sub-picoseconds to femtoseconds, and the lasers have exclusive capabilities in limiting the undesirable spread of the thermal process zone in the heated sample. Studying the thermal deformation induced by ultrashort-pulsed lasers is essential for preventing thermal damage. For the ultrashort-pulsed laser, the thermal damage is different from that caused by the long pulsed lasers and cracks occur after heating.

This dissertation presents a new finite difference method for studying thermal …

Development Of A Genetic Algorithm Based Search Strategy Suited For Design Optimisation Of Internal Combustion Engines, Nalitolela G

Tanzania Journal of Engineering and Technology (TJET)

Engine design optimisation is a multi-objective, multi-domain problem in a discontinuous design space. The state of the art of optimisation techniques shows that only methods of direct and adaptive search are appropriate for this type of problem. These include, adaptive random search, simulated annealing, evolution strategies and genetic algorithms. Of these methods, the genetic algorithms have been shown to be the most suited for the optimisation of multi-modal response functions in a discontinuous design space. This paper considers the important characteristics of genetic algorithms and their adaptation for use in parametric design optimisation of internal combustion engines. In order to …

Accuracy Analysis For Kolmogorov Entropy Used In Studying The Chaotic Dynamics Of Cfb Reactors Based On Solids Concentration Fluctuations, Samwel V. Manyele

Tanzania Journal of Engineering and Technology (TJET)

A study on the chaotic dynamics of a high flux circulating fluidized bed (CFB) riser (10-m high and 76-mm i.d.) using the maximum likelihood estimate of the Kolmogorov entropy (KML) is reported. The signals used were measured by using a solids concentration fiber optic probe, accuracy of which is reported based on statistical analysis. The sensitivity analysis of the parameters used for computing KML was conducted to identify optimum settings, based on the standard error, s(KML) and the nature of PDF of the b-values from the reconstructed phase space trajectories. The length of time series, N, sampling frequency, fs, and …

Predicting The Hydrogen Pressure To Achieve Ultralow Friction And Diamondlike Carbon Surfaces From First Principles, Haibo Guo, Yue Qi, Xiaodong Li

Faculty Publications

Hydrogen atmosphere can significantly change the tribological behavior at diamond and diamondlike carbon (DLC) surfaces and the friction-reducing effect depends on the partial pressure of hydrogen. We combined density functional theory modeling and thermodynamic quantities to predict the equilibrium partial pressures of hydrogen at temperature T, P_H2 (T), for a fully atomic hydrogen passivated diamondsurface. Above the equilibrium P_H2 (T), ultralow friction can be achieved at diamond and DLC surfaces. The calculation agrees well with friction tests at various testing conditions. We also show that P_H2 (T) …

College Of Engineering Senior Design Competition Spring 2008, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs, and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge.

The senior design competition helps to focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects …

Incorporation Of Evidences Into An Intelligent Computational Argumentation Network For A Web-Based Collaborative Engineering Design System, Xiaoqing Frank Liu, Ekta Khudkhudia, Ming-Chuan Leu

Computer Science Faculty Research & Creative Works

Conflicts among the stakeholders are unavoidable in the process of collaborative engineering design. Resolution of these conflicts is a challenging task. In our previous research, a web based intelligent collaborative system was developed which provides decision-making support, using computational argumentation techniques. Enhancements were done to this system to incorporate the priorities of the stakeholders and to detect arguments that self conflict. As an effort to make this system more effective and more objective in the process of decision making, we develop a method to assess the effect of evidences in the argumentation network, using Dempster-Shafer theory of evidence and fuzzy …

Digital Media Agco Challenger, Nebraska Tractor Test Lab

Nebraska Tractor Tests

Images and videos of the 2008 Agco Challenger Tractor Testing.

Tractor Inventory, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Benefits Of Leed Designs In Arkansas K-12 Schools, Philip Thrift

Mechanical Engineering Undergraduate Honors Theses

This paper provides and evaluation of an existing LEED certified sustainable green building for energy-efficiency, environmental impact, economic value, and occupant health. The new Bethel Middle School located in Bryant, Arkansas was the first LEED (Leadership in Energy and Environmental Design) certified public school building in the state. Based on actual building specifications and validated with the first year's utility bills, a simulation model was used to evaluate various design aspects of the school building. The building's baseline energy usage was compared with numerous energy and environmental scenarios. Results include both environmental and economic assessments. Overall, the study found that …

Caffeine Model Identification For Vigilance Performance Prediction, Chun-Hui Huang

Mechanical & Aerospace Engineering Theses & Dissertations

The pharmacodynamics and pharmacokinetics of caffeine have been well characterized. In this study, a caffeine dynamic model is developed to describe its pharmacodynamic effects on vigilance performance. Validated biomathematical models developed to address both individual and group fatigue and alertness in a non-laboratory setting represent a tremendous commercial opportunity. First, a test data set with caffeine effects isolated from circadian and homeostatic effects is created. Then a modeling approach for input and output effects is developed and different model structures for the caffeine effects are considered. Observer/Kalman filter Identification (OKID) algorithm is proposed and developed to identify the caffeine model …

Parallel Mpi/Fortran Finite Element Symmetrical/Unsymmetrical Domain Decomposition, Siroj Tungkatara

Civil & Environmental Engineering Theses & Dissertations

MPI/FORTRAN finite element analysis software based on Domain Decomposition (DD) formulas has been developed in this work. Efficient input data storage/data communication schemes, domain partitioning, fast symbolical and numerical sparse assembly, symmetrical/unsymmetrical sparse solver and robust symmetrical/unsymmetrical iterative solvers algorithms are all incorporated into the developed code. Parallel Precondition Conjugated Gradient (PCG) and Flexible Generalized Minimum Residual (FGMRES) are developed. Efficient computational techniques used in the developed code are explained. Numerical performance and the accuracy of the developed code are conducted on acoustic examples with medium to large grid sizes. The results obtained from ODU Wilbur cluster (under parallel processing …

Study Of Multibody Dynamics Using Matlab, Kalyani Soman

Mechanical & Aerospace Engineering Theses & Dissertations

Research in computational dynamics has gained importance in the past few years because of the demand for analysis and simulation of various multi-body systems in the growing mechanical and aerospace industry. These multi-body systems are made of individual bodies that are interconnected via mechanical joints. Mathematically, these joints that connect the bodies can be described as constraint equations imposed upon the motions of the involved free bodies. This process will result in an equation of motion expressed in the form of a differential-algebraic equation. It is the main objective of this thesis to develop a solution algorithm that can take …

Output Feedback Controller For Operation Of Spark Ignition Engines At Lean Conditions Using Neural Networks, Jonathan B. Vance, Brian C. Kaul, Jagannathan Sarangapani, J. A. Drallmeier

Electrical and Computer Engineering Faculty Research & Creative Works

Spark ignition (SI) engines operating at very lean conditions demonstrate significant nonlinear behavior by exhibiting cycle-to-cycle bifurcation of heat release. Past literature suggests that operating an engine under such lean conditions can significantly reduce NO emissions by as much as 30% and improve fuel efficiency by as much as 5%-10%. At lean conditions, the heat release per engine cycle is not close to constant, as it is when these engines operate under stoichiometric conditions where the equivalence ratio is 1.0. A neural network controller employing output feedback has shown ability in simulation to reduce the nonlinear cyclic dispersion observed under …

Electrically Steerable Diffraction Gratings For Hyperspectral Imaging: A Microelectromechanical System Design And Fabrication, Saban Atinc Delican

Theses and Dissertations

The current research is focused on the design and fabrication of an electrically programmable diffraction grating using standard micro electro mechanical systems (MEMS) technology. The goal is to design a beam steering element required to build very small hyperspectral imaging (HSI) sensors. The diffraction grating will be used to perform beam-dispersion - a critical step in the imaging process. The proposed transmissive diffraction grating based approach will minimize the overall size and the number of components in the physical design of the hyperspectral imagers, thereby enabling us to exploit the traditional advantages of MEMS such as increased reliability, smaller size, …

Knowledge-Based Information Resource Management System For Materials Of Sodium-Cooled Fast Reactor, Sean Hsieh

Reactor Campaign (TRP)

In the development of advanced fast reactors, materials and coolant/material interactions pose a critical barrier for higher temperature and longer core life designs. For advanced burner reactors (sodium cooled) such as EBR-II and FFTF, experience has shown that the qualified structural materials and fuel cladding severely limits the economic performance. In other liquid metal cooled reactor concepts, advanced materials and better understanding and control of coolant and materials interactions are necessary for realizing the potentials.

Liquid sodium has been selected as the primary coolant candidate for Gen. IV nuclear energy systems. Global Nuclear Partnership (GNEP) Advanced Burned Reactor (ABR) has …

Lectures On Computational Numerical Analysis Of Partial Differential Equations, James M. Mcdonough

Mechanical Engineering Textbook Gallery

From Chapter 1:

The purpose of these lectures is to present a set of straightforward numerical methods with applicability to essentially any problem associated with a partial differential equation (PDE) or system of PDEs independent of type, spatial dimension or form of nonlinearity.

Predictive Control Of A Munition Using Low-Speed Linear Theory, Nathan Slegers

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

"Modified linear theory provides reasonable impact predictions at high speeds. However, for typical small UAS mission speeds, less than 20-m/s impact errors were substantial due to large angles of attack and pitch rates. Low-speed linear theory was developed by including higher-order terms involving w and q that modified linear theory neglects. As a result, the angle of attack, pitch, and yaw predictions are significantly improved, leading to accurate impact predictions even at very low speeds. A predictive control scheme was developed to reduce dispersion using control surfaces near the tail. The predictive controller uses low-speed linear theory to rapidly predict …

Tractor Test 1920: New Holland Tt 75a, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S673 New Holland T6030 Elite Pc, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S651 Massey Ferguson 8680, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Morphologies And Kinetics Of A Dewetting Ultrathin Solid Film, Mikhail Khenner

Mathematics Faculty Publications

The surface evolution model based on geometric partial differential equation is used to numerically study the kinetics of dewetting and dynamic morphologies for the localized pinhole defect in the surface of the ultrathin solid film with the strongly anisotropic surface energy. Depending on parameters such as the initial depth and width of the pinole, the strength of the attractive substrate potential and the strength of the surface energy anisotropy, the pinhole may either extend to the substrate and thus rupture the film, or evolve to the quasiequilibrium shape while the rest of the film surface undergoes phase separation into a …