Mechanical Engineering Commons^™

2-D Path Planning For Direct Laser Deposition Process, Swathi Routhu, Divya Kanakanala, Jianzhong Ruan, Xiaoqing Frank Liu, Frank Liou

Computer Science Faculty Research & Creative Works

The zigzag and offset path have been the two most popular path patterns for tool movement in machining process. Different from the traditional machining processes, the quality of parts produced by the metal deposition process is much more dependent upon the choice of deposition paths. Due to the nature of the metal deposition processes, various tool path patterns not only change the efficiency but also affect the deposition height, a critical quality for metal deposition process. This paper presents the research conducted on calculating zigzag pattern to improve efficiency by minimizing the idle path. the deposition height is highly dependent …

College Of Engineering Senior Design Competition Fall 2010, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs, and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge.

The senior design competition helps to focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects …

Spatial Light Dilution As A Technique For Conversion Of Solar Energy To Algal Biomass, Daniel J. Dye

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

A photobioreactor has been designed and developed to efficiently utilize solar irradiance through spatial dilution of sunlight. The concept of spatial light dilution is simple: incident sunlight is spread over a large surface area, thus reducing the photon flux density of the light. The implementation of this technique, however, is difficult. The reactor described within uses a new approach to spatial light dilution, utilizing recently-developed optical components to diffuse concentrated sunlight inside an algae culture. Preliminary productivity tests indicate a 2-3 fold increase in productivity per unit aperture (sunlight collection area) over a control reactor with direct-sunlight. Aperture productivity of …

Agenda: 2010 World Energy Justice Conference: Emerging Solutions For The Energy Poor: Technological, Entrepreneurial And Institutional Challenges, University Of Colorado Boulder. Center For Energy & Environmental Security, Colorado Journal Of International Environmental Law And Policy

2010 World Energy Justice Conference (November 5)

This conference is a sequel to the 2009 World Energy Justice Conference (WEJC 2009) which began examining ways of mainstreaming safe, clean, and efficient energy for the world's Energy Poor (EP). The EP number two and a half billion people living on less than $1-2 a day who have no access to modern energy services. WEJC 2010 more fully develops these themes. WEJC 2010 will explore how the next round of global warming meetings in Cancun could design new flexibility mechanisms that give credits, for example, for the reduction of black carbon by the adoption of cookstoves, and embrace small …

Autonomous Underwater Vehicles As Tools For Deep-Submergence Archaeology, Christopher N. Roman, Ian Roderick Mather

Graduate School of Oceanography Faculty Publications

Marine archaeology beyond the capabilities of scuba divers is a technologically enabled field. The tool suite includes ship-based systems such as towed side-scan sonars and remotely operated vehicles, and more recently free-swimming autonomous underwater vehicles (AUVs). Each of these platforms has various imaging and mapping capabilities appropriate for specific scales and tasks. Broadly speaking, AUVs are becoming effective tools for locating, identifying, and surveying archaeological sites. This paper discusses the role of AUVs in this suite of tools, outlines some specific design criteria necessary to maximize their utility in the field, and presents directions for future developments. Results are presented …

Impact Investigation Of Reactor Fuel Operating Parameters On Reactivity For Use In Burnup Credit Applications, Tanya N. Sloma

UNLV Theses, Dissertations, Professional Papers, and Capstones

When representing the behavior of commercial spent nuclear fuel (SNF), credit is sought for the reduced reactivity associated with the net depletion of fissile isotopes and the creation of neutron-absorbing isotopes, a process that begins when a commercial nuclear reactor is first operated at power. Burnup credit accounts for the reduced reactivity potential of a fuel assembly and varies with the fuel burnup, cooling time, and the initial enrichment of fissile material in the fuel. With regard to long-term SNF disposal and transportation, tremendous benefits, such as increased capacity, flexibility of design and system operations, and reduced overall costs, provide …

Prediction Of Shock Diamonds And Mach Disk In An Under-Expanded Air Jet, Praveen D. Malali

Mechanical & Aerospace Engineering Theses & Dissertations

The present study involves performing simulations, using the commercially available CFD code Fluent, to obtain under-expanded jet flow structures for different values of nozzle pressure ratio (NPR). A fluid flow domain comprised of a converging nozzle attached to a plenum chamber is discretized, using triangular cells, in the pre-processing software Gambit, companion software to Fluent. The test of grid independence is carried out by performing simulations for NPR value of 10 using three discretized flow domains, referred to as a mesh or a grid, with varying cell numbers. Two models, namely the inviscid compressible flow model, employing Euler equations, and …

2010 Fall Engr333 Project Assignment, Matthew K. Heun

ENGR 333

The Fall 2010 ENGR333 project focused on heating and air-conditioning in campus dormitories, which are notoriously leaky and inefficient.

I asked the students “What would it take to retrofit the Bolt-Heyns-Timmer (BHT) dormitory heating and air-conditioning systems in a manner that achieves LEED certification?”

Customer

The customer for this project was Calvin’s VP for finance Henry DeVries.

Earth Systems Lesson Plan: Size And Forces Of The Solar System, Getaway Special Team 2010

Education and Outreach

No abstract provided.

Physics Lesson Plan: How Far And Fast Does It Travel?, Getaway Special Team 2010

Education and Outreach

No abstract provided.

Elementary And Middle School Science Lesson Plan: Solid, Liquid, Gas, What Is It?, Getaway Special Team 2010

Education and Outreach

No abstract provided.

User's Guide To Mbc3: Multi-Blade Coordinate Transformation Code For 3-Bladed Wind Turbine, G. S. Bir

Publications (E)

The dynamics of wind turbine rotor blades are conventionally expressed in rotating frames attached to the individual blades. The tower-nacelle subsystem though, sees the combined effect of all rotor blades, not the individual blades. Also, the rotor responds as a whole to excitations such as aerodynamic gusts, control inputs, and tower-nacelle motion—all of which occur in a nonrotating frame. Multi-blade coordinate transformation (MBC) helps integrate the dynamics of individual blades and express them in a fixed (nonrotating) frame. MBC involves two steps: transforming the rotating degrees of freedom and transforming the equations of motion. Reference 1 details the MBC operation. …

Modeling Acoustic Scattering From The Seabed Using Transport Theory, Jorge Quijano, Lisa M. Zurk

Electrical and Computer Engineering Faculty Publications and Presentations

Radiative Transfer (RT) theory has established itself as an important tool for electromagnetic remote sensing in parallel plane geometries with random distributions of scatterers, and most recently it has also been proposed as a model for the propagation of elastic waves in layered ocean sediments. In this work the capabilities of this model are illustrated, as the RT method is used to predict backscattering strength from laboratory models of random media. The RT model is characterized by its flexibility on accommodating scatterers in a broad variety of sizes, shapes, and acoustic contrast relative to the background media. Additionally, this formulation …

Wind Flow Modeling For Wind Energy Analysis Of The Nellis Dunes Area In Nevada, Upendra Rangegowda

UNLV Theses, Dissertations, Professional Papers, and Capstones

A wind energy analysis of the Nellis Dunes area in Nevada was conducted. A DEM file which contains the elevation data was used to generate the surface model and to create a 3-D mesh of the region. Local meteorological tower data collected for a period of one year was used to generate the diagnostic initial wind fields. Upper level wind fields were created using a surface boundary layer technique along with linear interpolation of the tower level wind fields. The vertical components of the velocities were adjusted using the equation of continuity. Mass consistent 3-D wind fields were then calculated …

Analytic Construction Of Periodic Orbits In The Restricted Three-Body Problem, Mohammed A. Ghazy

Mechanical & Aerospace Engineering Theses & Dissertations

This dissertation explores the analytical solution properties surrounding a nominal periodic orbit in two different planes, the plane of motion of the two primaries and a plane perpendicular to the line joining the two primaries, in the circular restricted three-body problem. Assuming motion can be maintained in the plane and motion of the third body is circular, Jacobi's integral equation can be analytically integrated, yielding a closed-form expression for the period and path expressed with elliptic integral and elliptic function theory. In this case, the third body traverses a circular path with nonuniform speed. In a strict sense, the in-plane …

The Applications And Limitations Of Printable Batteries, Matthew Delmanowski

Graphic Communication

This study focuses on the potential applications for printed batteries and how they could affect the printing industry. It also analyzes the main problems associated with manufacturing this technology and what needs to be done to overcome these issues. To find the answers to these questions, two methods of research were used. The first was through the elite and specialized interviewing of Dr. Scott Williams of Rochester Institute of Technology and Professor Nancy Cullins from Cal Poly. The second form of research was a common, yet useful, method called secondary research. This entailed looking at recent written research papers about …

Application Of Structured Light Imaging For High Resolution Mapping Of Underwater Archaeological Sites, Chris Roman, Gabrielle Inglis, James Rutter

Graduate School of Oceanography Faculty Publications

This paper presents results from recent work using structured light laser profile imaging to create high resolution bathymetric maps of underwater archaeological sites. Documenting the texture and structure of submerged sites is a difficult task and many applicable acoustic and photographic mapping techniques have recently emerged. This effort was completed to evaluate laser profile imaging in comparison to stereo imaging and high frequency multibeam mapping. A ROV mounted camera and inclined 532 nm sheet laser were used to create profiles of the bottom that were then merged into maps using platform navigation data. These initial results show very promising resolution …

Hydrogen Separation Membranes, University Of North Dakota. Energy And Environmental Research Center

EERC Brochures and Fact Sheets

Technical brief describing hydrogen separation membranes and their potential to reduce cost of hydrogen production and CO₂ separation. Outlines membrane types, commercially available membranes, and new technological developments. [This item is an outdated or superseded version and retained for historical purposes only. It may no longer reflect current information, policies, or practices.]

College Of Engineering Senior Design Competition Spring 2010, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Each student in his or her senior year chooses, plans, designs, and prototypes a product in this required element of the curriculum. The senior design project encourages the student to use everything learned in the engineering program to create a practical, real-world solution to an engineering challenge.

A highlight of the year-long senior design project is the senior design competition. This competition, which usually takes place the week before finals each semester, helps focus the senior students on increasing the quality and potential for commercial application for their design projects.

Judges from local industry evaluate the projects on innovation, commercial …

Follow Up Nucleate Boiling On-Flight Experiment, Andrew Fassmann

Presentations

No abstract provided.

Morphological Evolution Of Single-Crystal Ultrathin Solid Films, Mikhail Khenner

Mathematics Faculty Publications

An introduction to mathematical modeling of ultrathin solid films and the role of such modeling in nanotechnologies: Educational presentation for senior physics majors

Morphological Evolution Of Single-Crystal Ultrathin Solid Films, Mikhail Khenner

Mathematics Faculty Publications

An introduction to mathematical modeling of ultrathin solid films and the role of such modeling in nanotechnologies: Educational/Research presentation for senior physics majors

Numerical Investigation Of Pre-Detonator Geometries For Pde Applications, Robert T. Fievisohn

Theses and Dissertations

A parametric study was performed to determine optimal geometries to allow the successful transition of a detonation from a pre-detonator into the thrust tube of a pulse detonation engine. The study was performed using a two-dimensional Euler solver with progress variables to model the chemistry. The geometrical configurations for the simulations look at the effect of shock reflections, flow obstructions, and detonation diffraction to determine successful geometries. It was observed that there are success and failure rates associated with pre-detonators. These success rates appear to be determined by the transverse wave structure of a stably propagating detonation wave and must …

Solar Power And The Electric Grid, Energy Analysis, Nrel Energy Analysis

Publications (E)

In today’s electricity generation system, different resources make different contributions to the electricity grid. This fact sheet illustrates the roles of distributed and centralized renewable energy technologies, particularly solar power, and how they will contribute to the future electricity system. The advantages of a diversified mix of power generation systems are highlighted.

Funboe (Follow-Up Nucleate Boiling On-Flight Experiment), Getaway Special Team 2010

Education and Outreach

No abstract provided.

Gravitational Effects On Thin-Wire Subcooled Nucleate Boiling Dynamics, Justin Koeln, Andrew Fassmann, Troy Munro, Rob Barnett

Education and Outreach

No abstract provided.

Gravitational Effects On Thin-Wire Subcooled Nucleate Boiling Dynamics, Justin Koeln, Andrew Fassmann, Troy Munro, Rob Barnett

Presentations

No abstract provided.

Oscillatory And Monotonic Modes Of Long-Wave Marangoni Convection In A Thin Film, Sergey Shklyaev, Mikhail Khenner, Alexei Alabuzhev

Mathematics Faculty Publications

We study long-wave Marangoni convection in a layer heated from below. Using the scaling k=O Bi, where k is the wave number and Bi is the Biot number, we derive a set of amplitude equations. Analysis of this set shows presence of monotonic and oscillatory modes of instability. Oscillatory mode has not been previously found for such direction of heating. Studies of weakly nonlinear dynamics demonstrate that stable steady and oscillatory patterns can be found near the stability threshold.

The Gas Team And Nasa (Aka Boil, Boil, Toil And Trouble), Get Away Special Team 2010

Education and Outreach

No abstract provided.

Oscillatory And Monotonic Modes Of Long-Wave Marangoni Convection In A Thin Film, Sergey Shklyaev, Mikhail Khenner, Alexei Alabuzhev

Mathematics Faculty Publications

We study long-wave Marangoni convection in a layer heated from below. Using the scaling k=O Bi, where k is the wave number and Bi is the Biot number, we derive a set of amplitude equations. Analysis of this set shows presence of monotonic and oscillatory modes of instability. Oscillatory mode has not been previously found for such direction of heating. Studies of weakly nonlinear dynamics demonstrate that stable steady and oscillatory patterns can be found near the stability threshold.