Mechanical Engineering Commons^™

Test 2061: Challenger Mt755d, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Thermal Barrier Coatings (Tbc's) For High Heat Flux Thrust Chambers, Christopher Michael Bradley

Open Access Theses & Dissertations

The last 30 years materials engineers have been under continual pressure to develop materials with a greater temperature potential or to produce configurations that can be effectively cooled or otherwise protected at elevated temperature conditions. Turbines and thrust chambers produce some of the harshest service conditions for materials which lead to the challenges engineers face in order to increase the efficiencies of current technologies due to the energy crisis that the world is facing. The key tasks for the future of gas turbines are to increase overall efficiencies to meet energy demands of a growing world population and reduce the …

A Block Operator Splitting Method For Heterogeneous Multiscale Poroelasticity, Paul M. Delgado

Open Access Theses & Dissertations

Traditional models of poroelastic deformation in porous media assume relatively homogeneous material properties such that macroscopic constitutive relations lead to accurate results. Many realistic applications involve heterogeneous material properties whose oscillatory nature require multiscale methods to balance accuracy and efficiency in computation.

The current study develops a multiscale method for poroelastic deformation based on a fixed point iteration based operator splitting method and a heterogeneous multiscale method using finite volume and direct stiffness methods. To characterize the convergence

of the operator splitting method, we use a numerical root finding algorithm to determine a threshold surface in a non-dimensional parameter space …

Pressure And Heat Flux Effects On The Heat Transfer Characteristics Of Liquid Methane, Chance Paul Garcia

Open Access Theses & Dissertations

The heat transfer effects on liquid methane are investigated with the use of a carbo-thermal rig at the Center for Space Exploration Technology Research (cSETR) located at the University of Texas at El Paso (UTEP). The cSETR carbo-thermal rig design approach is presented along with the design of a methane condensing mobile unit (MCMU) to supply the laboratory and rig with liquid methane. The proposed research will generate useful insight in to heat transfer coefficient behavior, non-dimensional correlations, different flow conditions, varied inlet conditions, and varied heat flux for a subscale test article applicable to a regenerative cooled rocket engine …

Ionization In Diesel Combustion For On-Board Diagnostics And Engine Control, Tamer Hassan Badawy

Wayne State University Dissertations

Diesel engines have been known for their high thermal efficiency and specific power output, but there is concern about engine-out NOx and particulate matter emissions. To meet the current emission standards, advanced diesel engines are fitted with electronically controlled fuel injection systems and sophisticated and expensive after-treatment devices. Further improvements are still needed to meet future goals in better fuel economy and the more stringent emission standards. In order to meet these goals, there is a need for the control of the combustion process to reduce engine-out emissions in real-time and reduce the demand on the after-treatment devices. This requires …

Structure Borne Noise Analysis Using Helmholtz Equation Least Squares Based Forced Vibro Acoustic Components, Logesh Kumar Natarajan

Wayne State University Dissertations

This dissertation presents a structure-borne noise analysis technology that is focused on providing a cost-effective noise reduction strategy. Structure-borne sound is generated or transmitted through structural vibration; however, only a small portion of the vibration can effectively produce sound and radiate it to the far-field. Therefore, cost-effective noise reduction is reliant on identifying and suppressing the critical vibration components that are directly responsible for an undesired sound. However, current technologies cannot successfully identify these critical vibration components from the point of view of direct contribution to sound radiation and hence cannot guarantee the best cost-effective noise reduction.

The technology developed …

Transparent Actuator Made With Few Layer Graphene Electrode And Dielectric Elastomer, For Variable Focus Lens, Taeseon Hwang, Hyeok-Yong Kwon, Joon-Suk Oh, Jung-Pyo Hong, Seung-Chul Hong, Youngkwan Lee, Hyouk Ryeo Choi, Kwang J. Kim, Mainul Hossain Bhuiya, Jae Do Nam

Mechanical Engineering Faculty Research

A transparent dielectric elastomer actuator driven by few-layer-graphene (FLG) electrode was experimentally investigated. The electrodes were made of graphene, which was dispersed inN-methyl-pyrrolidone. The transparent actuator was fabricated from developed FLG electrodes.The FLG electrode with its sheet resistance of 0.45 kΩ/sq (80 nm thick) was implemented to mask silicone elastomer. The developed FLG-driven actuator exhibited an optical transparency of over 57% at a wavenumber of 600 nm and produced bending displacement performance ranging from 29 to 946 μm as functions of frequency and voltage. The focus variation was clearly demonstrated under actuation to study its application-feasibility in …

Influence Of Mechanical And Thermal Boundary Conditions On Stabilizing/Destabilizing Mechanisms In Evaporating Liquid Films, Aneet Dharmavaram Narendranath

Dissertations, Master's Theses and Master's Reports - Open

Liquid films, evaporating or non-evaporating, are ubiquitous in nature and technology. The dynamics of evaporating liquid films is a study applicable in several industries such as water recovery, heat exchangers, crystal growth, drug design etc. The theory describing the dynamics of liquid films crosses several fields such as engineering, mathematics, material science, biophysics and volcanology to name a few.

Interfacial instabilities typically manifest by the undulation of an interface from a presumed flat state or by the onset of a secondary flow state from a primary quiescent state or both. To study the instabilities affecting liquid films, an evaporating/non-evaporating Newtonian …

Development Of Nanostructured Graphene/Conducting Polymer Composite Materials For Supercapacitor Applications, Punya A. Basnayaka

USF Tampa Graduate Theses and Dissertations

The developments in mobile/portable electronics and alternative energy vehicles prompted engineers and researchers to develop electrochemical energy storage devices called supercapacitors, as the third generation type capacitors. Most of the research and development on supercapacitors focus on electrode materials, electrolytes and hybridization. Some attempts have been directed towards increasing the energy density by employing electroactive materials, such as metal oxides and conducting polymers (CPs). However, the high cost and toxicity of applicable metal oxides and poor long term stability of CPs paved the way to alternative electrode materials. The electroactive materials with carbon particles in composites have been used substantially …

Human Intention Recognition Based Assisted Telerobotic Grasping Of Objects In An Unstructured Environment, Karan Hariharan Khokar

USF Tampa Graduate Theses and Dissertations

In this dissertation work, a methodology is proposed to enable a robot to identify an object to be grasped and its intended grasp configuration while a human is teleoperating a robot towards the desired object. Based on the detected object and grasp configuration, the human is assisted in the teleoperation task. The environment is unstructured and consists of a number of objects, each with various possible grasp configurations. The identification of the object and the grasp configuration is carried out in real time, by recognizing the intention of the human motion. Simultaneously, the human user is assisted to preshape over …

Project Haiti 2012: Providing An Experiential Learning Experience Through The Design And Delivery Of A Water Purifier In Haiti, Yung Wong, Johnathon Camp, Shavin Pinto, Kyle Fennesy, Marc Compere, Yan Tang

Publications

In this paper, we share our experiences and lessons learned from Project Haiti 2012, a project to design and install a water purification system serving 20,000 people per day in the largest tent city in Haiti. Project Haiti 2012 was the third and largest system we have built for Haitians and represents a huge success for all participants and stakeholders. This paper discusses the unique experiential learning opportunity involved in the design and delivery of the water purifier in a foreign developing country. Multiple positive educational, social, and economic outcomes were achieved including students applying knowledge gained from coursework towards …

Development Of Dynamic Thermal Performance Metrics For Eco-Roof Systems, Seth Sinclair Moody

Dissertations and Theses

In order to obtain credit for an eco-roof in building energy load calculations the steady state and time-varying thermal properties (thermal mass with evapotranspiration) must be fully understood. The following study presents results of experimentation and modeling in an effort to develop dynamic thermal mass performance metrics for eco-roof systems. The work is focused on understanding the thermal parameters (foliage & soil) of an eco-roof, further validation of the EnergyPlus Green Roof Module and development of a standardized metric for assessing the time-varying thermal benefits of eco-roof systems that can be applied across building types and climate zones. Eco-roof foliage, …

College Of Engineering Senior Design Competition Fall 2012, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Senior Design Experience

Part of every UNLV engineering student's academic experience, the Senior Design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs and prototypes a product in this required element of the curriculum. Working in teams, the senior design project encourages students to use everything learned in the engineering and computer design programs to create a practical, real world solution to an engineering challenge.

Beyond the classroom ...

Because of the requirement to work in teams, students also build good communication skills, presentation skills and even business writing skills. They also have to …

The Design And Testing Of A Solar Autoclave With Broad Spectrum Sterilization Capabilities, Sarah S. Trabia

Honors College Theses

Energy is difficult to come by in developing countries and this interferes with the ability of doctors to provide good healthcare to their patients. Without decent sterilization, patients can become infected and diseases can spread throughout hospitals. This study involves designing a solar autoclave for developing countries that is as efficient as electrical autoclaves. The design is intended to not require any electrical input and to be affordable to those who cannot afford advanced medical equipment. Once the solar autoclave is designed, it will be tested to determine if it can sterilize equipment against a variety of different bacteria, including …

Development Of A Lightweight, Monolithic, Aspheric Mirror Utlizing Fdm Technology, Josiah Thomas

Von Braun Symposium Student Posters

No abstract provided.

Merrill-Cazier Library Gas Exhibition, Betty Rozum, Andrew Wesolek, Pamela N. Martin

Education and Outreach

This exhibition, presented in the Merrill-Cazier Library, captured the history and accomplishments of the GAS program. Click the download button to see a PowerPoint presentation featuring images and text from the exhibition.

Propagation Of Ultrasound Through Freshly Excised Human Calvarium, Armando Garcia Noguera

Department of Engineering Mechanics: Dissertations, Theses, and Student Research

The propagation of ultrasound through complex biological media, such as the human calvarium, poses a great challenge for modern medicine. Several ultrasonic techniques commonly used for treatment and diagnosis in most of the human body are still difficult to apply to the human brain, in part, because of the properties of the skull. Moreover, an understanding of the biomechanics of transcranial ultrasound may provide needed insight into the problem of blast wave induced traumatic brain injury (TBI). In the present study, the spatial variability of ultrasonic properties was evaluated for relevant frequencies of 0.5, 1, and 2.25 MHz. A total …

Numerical Analysis And Design Optimization Of Organic Bulk Hetero-Junction Solar Cells Using The Mixed Finite Element And Arc-Length Methods, James L. Dean

Mechanical & Aerospace Engineering Theses & Dissertations

Due to the high coupling and non-linear nature of the semiconductor equations, numerical stability becomes a major problem when using a purely Newtonian numerical method in solving these equations. Presented is a robust mixed finite element formulation with application for organic solar cell devices that incorporates the arc-length predictor-corrector method to bypass such stability issues. The simulated device represents a multilayered solar cell using organic bulk hetero-junction materials including donor materials Poly[2,1,3-benzothiadiazole-4,7-diyl[4,4-bis(2-ethylhexyl)-4H-cyclopenta[2,1-b:3,4- b']dithiophene-2,6-diyl]] (PCPDTBT) and poly 3-hexylthiophene (P3HT) with acceptor fullerene materials [6,6]-phenyl C61 butyric acid methyl ester (PC61BM) or [6,6]-phenyl C71 butyric acid methyl ester (PC71BM) as the photoactive …

The Influence Of Non-Equilibrium Pressure On Rotating Flows, Irfan Rashid Zardadkhan

Mechanical & Aerospace Engineering Theses & Dissertations

This study was undertaken to investigate the influence of pressure relaxation on steady, incompressible flows with strong streamline curvature. In the early part of this dissertation research, the significance of non-equilibrium pressure forces in controlling the structure of a steady, two dimensional axial vortex was demonstrated. In order to extend the study of pressure relaxation influences on more complex rotating flows, this dissertation has examined other rotating flow features that can be associated with hurricanes, tornadoes and dust devils. To model these flows, modified boundary layer equations were developed for a fluid column rotating near a solid plane including the …

Kinematic Analysis Of Gesture In Aphasia, Haroon Osmanzada

Mechanical & Aerospace Engineering Theses & Dissertations

Individuals who have experienced a left hemispheric stroke often develop aphasia, which results in a loss of effective verbal communication and reliance on gesturing to communicate. In this study we combined these two aspects of aphasic word retrieval difficulties and gesturing with three-dimensional kinematics. The purposes of this study were: 1) to develop a preliminary database of upper extremity movements for two common gestures used in gestural facilitation of naming (GES) training, slicing and hammering, in participants who experienced a left-hemisphere stroke and compare them to age-matched healthy controls, and 2) to perform a case study consisting of a single …

Development Of A Pyrotechnic Shock Simulation Apparatus For Spacecraft Applications, Joseph Binder, Matthew Mccarty, Chris Rasmussen

Aerospace Engineering

This report details the research, design, construction, and testing of a pyrotechnic shock simulation apparatus for spacecraft applications. The apparatus was developed to be used in the Space Environments Lab at California Polytechnic State University. It will be used for testing spacecraft components with dimensions up to 24”x12”x12” as well as CubeSats. Additionally, it may be used as an instructional or demonstrational tool in the Aerospace Department’s space environments course. The apparatus functions by way of mechanical impact of an approximately 20 lb stainless steel swinging hammer. Tests were performed to verify the simulator’s functionality. Suggestions for improvement and further …

Agent-Based Modeling Of Emergency Building Evacuation, Vi Q. Ha

Master's Theses

Panic during emergency building evacuation can cause crowd stampede, resulting in serious injuries and casualties. Agent-based methods have been successfully employed to investigate the collective human behavior during emergency evacuation in cases where the configurational space is extremely simple - usually one rectangular room - but not in evacuations of multi-room or multi-floor buildings. This implies that the effect of the complexity of building architecture on the collective behavior of the agents during evacuation has not been fully investigated. Here, we employ a system of self-moving particles whose motion is governed by the social-force model to investigate the effect of …

College Of Engineering Senior Design Competition Spring 2012, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Senior Design Experience

Part of every UNLV engineering student’s academic experience, the Senior Design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs and prototypes a product in this required element of the curriculum. Working in teams, the senior design project encourages students to use everything learned in the engineering and computer design programs to create a practical, real world solution to an engineering challenge.

Beyond the classroom...

Because of the requirement to work in teams, students also build good communication skills, presentation skills and even business writing skills. They also have to source …

College Of Engineering Senior Design Competition Spring 2018, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs, and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge. The senior design competition helps focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects on …

Energy Consumption And Greenhouse Gas Emissions From Commercial And Manufacturing Sectors Specific Studies On Hvac Equipment And Dairy Processing, Aik Jong Tan

Graduate Theses and Dissertations

Commercial and manufacturing sectors in United States consumed approximately 50% of the total End use energy in 2010. In 2009, 81.5% of the greenhouse gas (GHG) emitted in the United States was energy related. From the broad aspects of commercial and manufacturing sectors; two relatively narrow and specific topics, commercial building's HVAC equipment and dairy processing were chosen to increase the understanding of the energy use and GHG emission in these two sectors. Few published studies related to these two specific areas are available. The first study in this thesis discussed the energy use and GHG emissions by HVAC equipment …

Design Of Orbital Maneuvers With Aeroassisted Cubesatellites, Stephanie Clark

Graduate Theses and Dissertations

Recent advances within the field of cube satellite technology has allowed for the possible development of a maneuver that utilizes a satellite's Low Earth Orbit (LEO) and increased atmospheric density to effectively use lift and drag to implement a noncoplanar orbital maneuver. Noncoplanar maneuvers typically require large quantities of propellant due to the large delta-v that is required. However, similar maneuvers using perturbing forces require little or no propellant to create the delta-v required. This research reported here studied on the effects of lift on orbital changes, those of noncoplanar types in particular, for small satellites without orbital maneuvering thrusters. …

Perceptions Measurement Of Professional Certifications To Augment Buffalo State College Baccalaureate Technology Programs, As A Representative American Postsecondary Educational Institution, Christopher N. Brown

Industrial Technology Theses

The purpose of this study was to assess, measure, and analyze whether voluntary, nationally-recognized professional certification credentials were important to augment technology programs at Buffalo State College (BSC), as a representative postsecondary baccalaureate degree-granting institution offering technology curricula. Six BSC undergraduate technology programs were evaluated within the scope of this study: 1.) Computer Information Systems; 2.) Electrical Engineering, Electronics; 3.) Electrical Engineering, Smart Grid; 4.) Industrial Technology; 5.) Mechanical Engineering; and 6.) Technology Education. This study considered the following three aspects of the problem: a.) postsecondary technology program enrollment and graduation trends; b.) the value/awareness of professional certifications to employers …

Buffering Pv Output During Cloud Transients With Energy Storage, Yacouba Moumouni

UNLV Theses, Dissertations, Professional Papers, and Capstones

Consideration of the use of the major types of energy storage is attempted in this thesis in order to mitigate the effects of power output transients associated with grid-tied CPV systems due to fast-moving cloud coverage. The approach presented here is to buffer intermittency of CPV output power with an energy storage device (used batteries) purchased cheaply from EV owners or battery leasers. When the CPV is connected to the grid with the proper energy storage, the main goal is to smooth out the intermittent solar power and fluctuant load of the grid with a convenient control strategy. This thesis …

Improving Efficiency And Capacity Of Hydro-Turbines In The Western United States, Hoover Dam, Jonathan Sanchez

UNLV Theses, Dissertations, Professional Papers, and Capstones

The goal for this thesis is to minimize clearances and tolerances, in order to prevent water leakage. A proper seal on the seal rings does not let excess water flow through the turbine runner, thus conserving more water and wasting less energy. Moreover, water leakage past worn wear plates allows for an extra load for the turbine when operating in condense mode. When the wicket gates are closed, water leakage past worn plates wastes mechanical energy in the water; thus, decreasing the efficiency of the Francis turbine, especially when operating at partial loads. Furthermore, the wicket gates also known as …

Computational Simulations Of Carbon Dioxide Flow In Porous Media For Carbon Sequestration Applications, Eduardo Cordero^, Jesus D. Ortega, Dustin Crandall, Grant Bromhal, Vinod Kumar*

COURI Symposium Abstracts, Spring 2012

No abstract provided.