Mechanical Engineering Commons^™

Observation Of Center Disaster Damage On Pariaman And Wasior Using Differential Sar Interferometry (Dinsar), Dodi Sudiana, Mia Rizkinia

Makara Journal of Technology

This study focuses on disaster observations in Pariaman (West Sumatera) and Wasior (Papua) using remote sensing techniques (differential SAR interferometry). Differential interferometry (DInSAR) method was performed on two PALSAR data sets with different acquisition months, i.e. about a month after and before disaster, respectively. The center damage of Pariaman earthquake and Wasior flood can be determined by deriving Land Subsidence using DInSAR method.

Coastal Physical Vulnerability Of Surabaya And Its Surrounding Area To Sea Level Rise, Sayidah Sulma, Eko Kusratmoko, Ratna Saraswati

Makara Journal of Technology

The study for coastal vulnerability to sea level rise was carried out in Surabaya and its surrounding area, it has focused on calculations of the physical vulnerability index were used coastal vulnerability index (CVI) methods. It was standardized by the multi criteria analysis (MCA) approach according to the study area. The score of each physical variable derived from remote sensing satellite data and the results of studies that have been done, such as modeling results and thematic maps, and then integrated into geographic information systems (GIS). Result of this study shows that the coastal areas of Gresik, Surabaya, and Sidoarjo …

The Effect Of Size And Crumb Rubber Composition As A Filler With Compatibilizer Pp-G-Ma In Polypropylene Blends And Sir-20 Compound On Mechanical And Thermal Properties, Erna Frida

Makara Journal of Technology

Having been researched the development of thermoplastic elastomer material of polypropylene and natural rubber SIR- 20 compound with Crumb Rubber as the filler. Reinforced polypropylene with size 60 mesh with 1 mm, and the composition of the Crumb rubber (30, 40, and 50) wt%. Observed mechanical properties are tensile strength, fracture elongation, Young's modulus, tear strength and impact strength. Thermal properties are analyzed by DSC and DTA/TGA. It is acquired that for the size of 60 mesh crumb rubber tensile strength, fracture elongation, Young’s modulus, tear strength and impact strength are bigger than 1mm size. The addition of 60 mesh …

Development Of Local-Economic-Development Small And Medium Industries (Led-Sme) In East Java, Rachmad Hidayat, Sabarudin Akhmad

Makara Journal of Technology

This paper presents the effects of Indonesian government’s developmental efforts of assistance and training performed on the growth of LED-SME business units and business performance. Both parameters of the government’s assistance and training were used to analyze the impact to the growth and performance of business unit. To achieve a comprehensive result, samples acquired in this research were about 190 entrepreneurs and managers of LED-SME from East Java. Based on the parameters above, there are five hypotheses made to prove the relationship of the assistance and training to the growth and performance of business units. The structural equation modeling (SEM) …

Cdm Potential In Palm Solid Waste Cogeneration As An Alternative Energy In Aceh Province, Mahidin Mahidin, Izarul Machdar, Muhammad Faisal, Muhammad Nizar

Makara Journal of Technology

Empty Fruit Bunch (EFB) as a solid waste in Crude Palm Oil (CPO) industry does not utilized yet as an alternative energy source to generate electricity. It is well known that use of solid wate (biomass) as an energy source is part of the Clean Development Mechanism (CDM) scheme due to direct reduction of Green House Gases (GHGs) emission and provide a direct contribution to sustainable development. Utilization of EFB as a source of energy is very potential to be implemented in Aceh since this province has 25 CPO Mills at the moment which actively produce about 870,000 ton EFB …

Small Scale Experiment: Thermal Performance Comparison Between Fiber-Cement Roof And Photovoltaic Roof In Malang, Indonesia, Nurhamdoko Bonifacius, Sri Nastiti Nugrahani Ekasiwi

Makara Journal of Technology

Irradiation on the surface of photovoltaic module heats up the photovoltaic module itself and the room underneath the roof of integrated photovoltaic building in the tropics area. Room heating reduces thermal condition and photovoltaic module surface heating reduces its performance in generating electricity. This paper discusses an experiment of measuring the surface temperature of photovoltaic modules and fiber-cement roof surface as a comparison. This experiment also measures the impact of rising temperatures in each space underneath. It used small-scale mock-ups exposed to direct sunlight. The result of the experiment shows that photovoltaic roof surface temperature is lower than fiber-cement roof …

Improved Optical Probe For Measuring Phytoplankton Suspension Concentrations Based On Optical Fluoresensce And Absorption, Retno Wigajatri Purnamaningsih, Nining Betawati Prihantini

Makara Journal of Technology

This paper discusses the results of improved optical probe that works according to optical fluorescence and absorption phenomena for measuring the phytoplankton suspension concentrations. Measurements are made on the Scenedesmus sp. culture. The laboratory test has shown that range of concentration from 104 up to around 1 x 106 cells/mL; fluorescence intensity at λ = 685 nm; and logarithmic of transmission intensity at λ = 405 nm are proportional to the cell concentration linear with proportional constant γ = 4 × 10-5 and β = –2 × 10-7 mL/cell respectively.

Mechanical And Thermal Properties Of Polypropylene Reinforced By Calcined And Uncalcined Zeolite, Nurdin Bukit

Makara Journal of Technology

This study was carried out to compare mechanical and thermal properties of polypropylene (PP) reinforced with uncalcined and calcined zeolites. The PP samples were reinforced with zeolites at various quantities of 2, 4, and 6 (wt %). The comparison of the two types of zeolite was based on mechanical properties, including tensile strength, elongation at break, and Young’s modulus, and thermal characteristics analyzed using DSC, and DTA/TGA technique. The results obtained clearly revealed that both zeolites were able to significantly increase tensile strength and Young’s modulus of the samples, with calcined zeolite was found to work better. Addition of calcined …

Benchmark For Country-Level Earthquake Strong-Motion Instrumentation Program, Widjojo Adi Prakoso, I Nyoman Sukanta

Makara Journal of Technology

An empirical study to develop benchmark models at country-level to assess the suggested number of earthquake strongmotion stations based on a framework encompassing geographic, demographic, and socio-economic parameters is reported. The models are to provide a working estimate of the required number of stations for improving the strongmotion instrumentation program of Indonesia. National earthquake strong-motion networks of New Zealand, Japan, Taiwan, Iran, Turkey, and Italy were used as the references. The parameter proposed is the number of stations in land area of 1,000 km2, and three models based on the exponential regression analysis are presented as functions of population density, …

Worst Case Of Relative Disturbance Gain Array For Uncertain Distillation System, Rudy Agustriyanto, Jie Zhang

Makara Journal of Technology

This article discusses the constrained nonlinear optimization formulation for calculating the worst case of lower and upper bounds of relative disturbance gain array (RDGA) for uncertain process models. The proposed approach seeks the minimum and maximum values of the relative disturbance gains subject to the constraints in which the process and disturbance gains are within their uncertainty ranges. RDGA ranges are useful for control structure determination and the related robustness, as they provide information regarding the sensitivity to gain uncertainties. The proposed method is demonstrated by ternary distillation column case study. Closed loop simulation results support the analysis based on …

Biodiesel Production From Waste Cooking Oil Using Hydrodinamic Cavitation, Muhammad Dani Supardan, Satriana Satriana, Mahlinda Mahlinda

Makara Journal of Technology

The aim of this research was to study biodiesel production from low cost feedstock of waste cooking oil (WCO) using hydrodynamic cavitation apparatus. A two-step processes esterification process and transesterification process using hydrodynamic cavitation for the production of biodiesel from WCO is presented. The first step is acid-catalyzed esterification process for reducing free fatty acid (FFA) content of WCO and followed by base-catalyzed transesterification process for converting WCO to biodiesel as the second step. The result of esterification process with methanol to oil molar ratio of 5 and temperature of 60 oC showed that the initial acid value of WCO …

Knowledge Dictionary For Information Extraction On The Arabic Text Data, Wahyu Syaifullah Jauharis Saputra, Agus Zainal Arifin, Anny Yuniarti

Makara Journal of Technology

Information extraction is an early stage of a process of textual data analysis. Information extraction is required to get information from textual data that can be used for process analysis, such as classification and categorization. A textual data is strongly influenced by the language. Arabic is gaining a significant attention in many studies because Arabic language is very different from others, and in contrast to other languages, tools and research on the Arabic language is still lacking. The information extracted using the knowledge dictionary is a concept of expression. A knowledge dictionary is usually constructed manually by an expert and …

Fuzzy Statistical Refinement For The Forecasting Of Tenders For Roadway Construction, Jeng-Wen Lin, Cheng-Wu Chen, Ting-Chang Hsu

Journal of Marine Science and Technology–Taiwan

Due to market competition, construction companies often place low bids when tenders are invited for domestic public construction projects. Over-competition can lead to vicious price wars to win a tender, which can in turn seriously affect the quality of construction. This study aims to establish an accurate Taiwan based model for the forecasting of the tendered price for roadway construction. This model is designed to assist the public sector to determine what would be a reasonable reserve price or award price. In order to ensure accurate predictions, a data classification system is established using fuzzy set theory. For each category …

Rust-Expansion-Crack Service Life Prediction Of Existing Reinforced Concrete Bridge/Viaduct Using Time-Dependent Reliability Analysis, Ming-Te Liang, Jiang-Jhy Chang, Han-Tung Chang, Chi-Jang Yeh

Journal of Marine Science and Technology–Taiwan

It is necessary to develop a calculation method to help in the making of feasible, reliable, and serviceable predictions for the service lives of bridge or viaduct structures. This article presents the basis for doing rust-expansion-crack service life predictions for existing reinforced concrete (RC) bridges and viaducts in chloride-laden environments based on timedependant reliability modeling due to the corrosion of steel in concrete. The corrosion process has three stages, the initiation (diffusion or carbonation) time (ti = tc), the depassivation time (tp), and the propagation (corrosion) time (tcorr). The rustexpansion-crack service lives (tcr) of existing RC bridges or viaducts can …

Studies Of The Effect Of Diffusion-Induced Chloride Binding On Chlorination Life Predictions For Existing Reinforced Concrete Bridges, Ming-Te Liang, Jiang-Jhy Chang, Tung-Wei Yu

Journal of Marine Science and Technology–Taiwan

The chloride ions diffusion is one of important factors of corrosion of reinforced concrete (RC) structures. The total chloride concentration penetrated into concrete can be expressed as the sum of bound and free chloride concentrations. The principal purpose of this paper is to study the chlorination life prediction of existing RC bridges due to chloride binding effect. The investigation method is that the no binding, linear binding, Langmuir and Freundlich adsorption isotherms are substituted into the analytical solutions of linear (diffusivity D = constant) and non-linear (D ≠ constant) diffusion equations associated with initial and boundary conditions, respectively. The chlorination …

Study On The Seismic Behavior Of Self-Anchored Suspension Bridges, Wen-Liang Qiu, Chang-Huan Kou, Chin-Sheng Kao, Shih-Wei Ma, Jiun Yang

Journal of Marine Science and Technology–Taiwan

The suspension bridge has a beautiful structural shape and an excellent spanning ability. The self-anchored suspension bridge has its main cables anchored directly on the two ends of the main girders, saving construction costs and time incurred during the anchorage construction of an earth-anchored suspension bridge. However, the feasibility of a self-anchored suspension bridge in a strong earthquake zone and the use of dampers to reduce seismic responses have yet to be fully investigated. Using the Yellow-River Road Bridge in Mainland as an example, this study sets out to analyze and investigate a series of seismic responses of a self-anchored …

A Manifold-Based Exponentially Convergent Algorithm For Solving Non-Linear Partial Differential Equations, Chein-Shan Liu

Journal of Marine Science and Technology–Taiwan

For solving a non-linear system of algebraic equations of the type: Fi(xj) = 0, i, j = 1, …, n, a Newton-like algorithm is still the most popular one; however, it had some drawbacks as being locally convergent, sensitive to initial guess, and time consumption in finding the inversion of the Jacobian matrix ∂Fi /∂xj. Based-on a manifold defined in the space of (xi, t) we can derive a system of non-linear Ordinary Differential Equations (ODEs) in terms of the fictitious time-like variable t, and the residual error is exponentially decreased to zero along the path of x(t) by solving …

Design Of Planning Level Ship Product Model For Ship Initial Design, Sungchul Shin, Soon-Sup Lee, Jong-Kap Lee, Kyung-Ho Lee

Journal of Marine Science and Technology–Taiwan

This paper introduces a design of planning level ship product model (called SPPM hereinafter) based on ISO 10303 Standard for The Exchange of Product Model data (STEP). For the design of this model, the information modeling methodologies such as Integration Definition (IDEF) methods and Unified Modeling Language (UML) were reviewed, and a hybrid method was established. By using this method, ship initial design process was analyzed, and STEP-based information model and class libraries for SPPM were defined. For the data structure of this model, the shipbuilding Application Protocols (AP215, AP216 and Ship Common Model) of STEP were investigated and utilized …

Absorber Geometry Optimization For A New Wave Energy Converter, Rachel A. Durren

Masters Theses

Alternative energy technologies are on the forefront of research due to the rising costs of oil and natural gas. One relatively under development source of energy is ocean waves. In order to make the use of ocean waves economically viable, the amount of energy absorbed by wave energy converters (WEC) must be optimized. The research within presents a new conceptual design, "Aqua Fly", for a WEC with emphasis on maximizing the amount of energy absorbed. The energy absorption component of the "Aqua Fly" was isolated and a small scale 2-D study of energy absorption. First, the amount of energy in …

Re-Evaluation Of Resistance Prediction For High-Speed Round Bilge Hull Forms, Jae Won

Theses and Dissertations

Predicting the resistance of a high-speed monohull has been of interest to Naval Architects for several decades. Even though considerable amount of research has been carried out in this area, there remains a degree of uncertainty in the accurate resistance prediction in the early design stage. This research thesis attempts to investigate a method for enhancing the accuracy of resistance prediction methods for high-speed round-bilge monohull form vessels for a wide range of volumetric Froude numbers (Fn). While a number of systematic series are in existence, their data are either not readily available or scattered in various internal reports and …

Numerical Modeling Of Lifting Flows In The Presence Of A Free Surface, Leonardo R. Carmona Vasquez

LSU New Orleans Theses and Dissertations

This thesis work started as an attempt to create a computational tool to model hydrodynamics problems involving lifting flows. The method employed to solve the problem is potential flow theory.

Despite the fast evolution of computers and the latest developments in Navier-Stokes solvers, such as the Ranse methods; potential flow theory offers the possibility to create or use existing computational tools, which allow us modeling hydrodynamics problems in a simpler manner. Navier-Stokes solver can be very expensive from the computational point of view, and require a high level of expertise in order to achieve reliable models.

Based on the above, …

Correlation Of Shear Strength Between Longitudial And Transverse Specimens, Erasto A. Fernandez

LSU New Orleans Theses and Dissertations

In this thesis, new methods for shear strength are proposed and backed up through extensive experimentation, ABAQUS models and data analysis of Titanium welds of three different alloys. The results are compared with those obtained by using the procedure outlined by AWS B4 for calculating Shear Strength in the transverse and longitudinal directions; this equation is widely used by the American Welding Society (AWS) and all those in search of more efficient designs involving welding.

It is a well-documented issue that the equation provided by AWS yields a large discrepancy between the values for shear strength of longitudinal and transverse …

Constructing The Comprehensive Subsurface Structure Of Lanyang Plain, Chih-Hao Hsu, Sao-Jeng Chao, Shuh-Gi Chern, Howard Hwang

Journal of Marine Science and Technology–Taiwan

This study presents an integral approach to construct a comprehensive subsurface structure of Lanyang Plain. It is well known that geophysicists and engineers use different techniques to investigate the subsurface structure, and each of these techniques has its own advantages. Therefore, in this study, the excellent results from these two fields are selected and combined to provide a comprehensive profile of the subsurface structure of Lanyang Plain. In this study, the subsurface information on nine recording stations and digital boundary lines of Lanyang Plain based on the digital geologic map published by the Central Geological Survey are utilized to create …

Slamming Induced Dynamic Response Of A Floating Structure, Mohammad Ali Lotfollahi-Yaghin1, Mehdi Rastgar, Hamid Ahmadi

Journal of Marine Science and Technology–Taiwan

Study of the slamming phenomenon is one of the most important branches of the floating structure dynamics. Experimental study of the floating structure dynamics can be very expensive because it requires a long wave flume and a moving model. Hence, numerical methods are considered to be very useful and efficient tools for modeling and dynamic analysis of floating structures. In the present paper, slamming induced impulsive loads are investigated firstly. Afterwards, dynamic response of a barge under the slamming excitation is studied, and the natural frequencies and mode shapes are determined, using the FE software package, ANSYS. Critical cross sections …

Corrosion Rate Of Carbon Steel For Flowline And Pipeline As Transmission Pipe In Natural Gas Production With Co2 Content, Andi Rustandi, Muhammad Adyutatama, Enriko Fadly, Norman Subekti

Makara Journal of Technology

The purpose of this research is to investigate the corrosion rate of carbon steel as flowline and pipeline in natural gas production with CO2 content. The influence of variety of conditions that represent the actual conditions in practice such as CO2 partial pressure and solution composition, particularly NaCl percentage were performed. Research conducted by polarization test and simulation methods using PREDICTTM software. The result of this research is used to illustrate the level of corrosion rate of typical carbon steel i.e. API 5L X-52 occurred in natural gas pipelines due to the effect of dissolved CO2. From the experiments obtained …

Concurrent Engineering Of Tolerance Synthesis And Process Selection For Products With Multiple Quality Characteristcs Considering Process Capability, Mohamad Imron Mustajib

Makara Journal of Technology

The existences of variances that are very difficult to be removed from manufacturing processes provide significance of tolerance to the product quality characteristics target of customer functional requirement. Furthermore, quality loss incurred due to deviation of quality characteristics of the target with a specified tolerance. This article discusses the development of concurrent engineering optimization model of tolerance design and manufacturing process selection on product with multiple quality characteristics by minimizing total costs in the system, namely total manufacturing cost and quality loss cost as functions of tolerance, also rework and scrap costs. The considered multiple quality characteristics have interrelated tolerance …

Modification Of Flow Structure Over A Van Model By Suction Flow Control To Reduce Aerodynamics Drag, Harinaldi Harinaldi, Budiarso Budiarso, Warjito Warjito, Engkos Achmad Kosasih, Rustan Tarakka, Sabar Pangihutan Simanungkalit, I Gusti Made Fredy Lay Teryanto

Makara Journal of Technology

Automobile aerodynamic studies are typically undertaken to improve safety and increase fuel efficiency as well as to find new innovation in automobile technology to deal with the problem of energy crisis and global warming. Some car companies have the objective to develop control solutions that enable to reduce the aerodynamic drag of vehicle and significant modification progress is still possible by reducing the mass, rolling friction or aerodynamic drag. Some flow control method provides the possibility to modify the flow separation to reduce the development of the swirling structures around the vehicle. In this study, a family van is modeled …

Optimizing Fermentation Medium To Produce Cyclosporin A Using Response Surface Methodology, Rofiq Sunaryanto

Makara Journal of Technology

Response surface methodology (RSM) is a three factorial model which illustrates the relationship between one or more independent variables. RSM can be used to optimize the fermentation medium for the production of Cyclosporin A from the isolate Tolypocladium inflatum. The optimal point of the response surface area is predicted by using a seconddegree polynomial model and applying the statistic model obtained from the central composite design (CCD). The results of optimizing the fermentation medium for Cyclopsorin using the three independent variables of glucose, casein, and KH2PO4 show that all three of the independent variables affect the production of Cyclosporin A. …

Age, Gender, And Muscle Strength: A Study Based On Indonesian Samples, Henny Henny, Hardianto Iridiastadi, Iftikar Zahedi Sutalaksana

Makara Journal of Technology

Age and gender have been commonly used as a main criterion in accepting a job aplicant, but it is usually not clear how these affect job performance. While a number of recent studies have been done that describe the relationships between age, gender, and participants capacity (e.g., muscle strength), the results have been inconclusive. In Indonesia, in particular, such issues have been rarely investigated, and it is still important to study the issue since the relationships between these factors are population-specific. This study aimed at describing the relationships between age and muscle strength among workers for both genders. Ninety-six male …

Circularly Polarized Microstrip Array Antenna For Ground Segment In Quasi-Zenith Satellite System, Fitri Yuli Zulkifli, Eko Tjipto Rahardjo

Makara Journal of Technology

In satellite communication system, antenna plays an important role. Therefore, the antenna must meet some requirements, such as high gain, circular polarization, and good directivity. In this paper, a four element linear array triangular patch microstrip antenna with cross slot is designed to be used for Quasi-Zenith satellite system. A simulation study as well as experimental study was carried out. The simulation showed that the 3 dB axial ratio bandwidth of 87 MHz (2.569-2.656 GHz) is achieved while the measured results showed 96 MHz (2.556-2.652 GHz). The linear array of 4 element antenna has a gain of 13.73 dB and …