Mechanical Engineering Commons^™

Experimental Study Of Scour Around Monopile And Jacket-Type Offshore Wind Turbine Foundations, Hsin-Hung Chen

Journal of Marine Science and Technology–Taiwan

Wind turbines platforms and pillars on offshore wind farms are negatively affected by wave and current action. In Taiwan, the water depth of most planned wind turbine foundations is more than 15 m. At this water depth, scour around offshore wind turbine foundations is mainly subject to the ocean current, which causes damage or collapse of foundations. Therefore, this study focused on the influence of ocean current on the monopile and jacket-type foundations of offshore wind turbines. Hydraulic model experiments were conducted to investigate the maximum scour depth and range around pillars in these foundations. Under the effects of current, …

Wavelet Transform On Digital Rainbow Hologram Based On Spectral Compression For Quality Enhancement In 3d Display Media, Ucuk Darusalam, Panca Dewi Pamungkasari

Makara Journal of Technology

A digital rainbow hologram (DRH) is a potential next-generation three-dimensional display media for the development of modern and smart electronics devices. It is one of the methods that can support the characteristic whereby a realistic display media occupies the space that the real object would have occupied. Since a rainbow hologram records a large amount of spatial or temporal frequency component from the object that represents the rainbow spectrum, a large amount of information needs to be decoded digitally. In this paper, to reconstruct a DRH, we propose a novel method based on the modulation of red, green, and blue …

Molecularly Conductive Behavior Of Blended Polymer Electrolyte-Based Cmc/Pva, Noor Saadiah Mohd Ali, Dishen Zhang, Yuki Nagao, Ahmad Salihin Samsudin

Makara Journal of Technology

This study investigated the electrical conduction and structural behavior of blended polymer electrolyte (BPE)-based carboxymethyl cellulose (CMC) and polyvinyl alcohol (PVA) in the development of solid-state electrochemical devices. Based on impedance spectroscopy and correlating Fourier transform infrared (FTIR) with thermogravimetric analysis, a framework was proposed to explain the structural enhancement of the BPE system. As revealed by FTIR, the optimum conductivity of CMC/PVA BPEs was 9.21 × 10−6 Scm−1 for 80:20 composition attributed to the intermolecular attraction between the polymers. Thermal stability of the CMC/PVA was influenced by the formation of a hydrogen bond between the hydroxyl (-OH), carboxylate (-COO-), …

Multistage Sonication Effect On The Composition And Properties Of Degraded Chitosan Product, Nurul Laili Arifin, Emma Savitri, Anjar Indah, Fesa Putra, Sumarno Sumarno

Makara Journal of Technology

The sonication method randomly breaks polymer chains to produce a varied distribution of products. A scheme with multi-stage sonication steps is proposed to identify oligomers and low molecular weight chitosan based on changes to the degrad-ed product. For each sonication level, 1% (w/v) chitosan in 1% (v/v) aqueous acetic acid was sonicated for 120 min at 60 °C. The products of the sonication treatment were deprotonized by adding an alkali solution, freeze dried and insoluble product re-sonicated until a low molecular weight was produced. Low molecular weight chitosan/insoluble products were character-ized with Fourier-transform infrared spectra (FT-IR) and X-ray diffraction (XRD) …

Data Fusion Method Based On Adaptive Kalman Filtering, Bernadus Herdi Sirenden

Makara Journal of Technology

This paper discusses data fusion methods to combine the data from a rotary encoder and ultrasonic sensor. Both sensors are used in a micro-flow calibration system developed by the Research Center of Metrology LIPI. The methods studied are hierarchical data fusion and Kalman filtering. Three types of Kalman filters (KFs) are compared: the conventional Kalman filter and two adaptive Kalman filters. Moreover, a method to combine the uncertainty results from KF in hierarchical data fusion is proposed. The aim of this study is to find appropriate methods of data fusion that can be implemented in micro-flow calibration systems. Data from …

Study Of Zno Nanospheres Fabricated Via Thermal Evaporation For Solar Cell Application, Fatin Farisha Alia Azmi, Bouchta Sahraoui, Saifful Kamaluddin Muzakir

Makara Journal of Technology

A solar cell is a device that absorbs light energy to generate electrical energy. A typical example of a solar cell is the quantum dot solar cell (QDSC), which consists of three main components: (i) fluorophore: the component that absorbs light and generates excited state electrons and holes, (ii) photoelectrode: the component that transports the excited state electron and prevents recombination of excited state electrons and holes, and (iii) electrolyte: the component that re-plenishes the vacancy left by the excited electron in the hole. Despite the increasing number of research in the QDSC field, to date, a device with significant …

Sorption-Based Energy Storage Systems: A Review, Kyaw Thu, Nasruddin Nasruddin, Sourav Mitra, Bidyut Baran Saha

Makara Journal of Technology

Mismatched timing between the supply and demand of energy calls for reliable storage systems. Energy storage systems have become further significant with the widespread implementation of renewable energy. These systems can mitigate problems that are often associated with renewable energy sources such as supply unreliability while meeting the de-mand during peak hours. Energy can be stored in various forms, yet storage systems can be generally grouped based on their output forms, namely (i) electricity and (ii) heat or thermal energy. Electrical energy is the most convenient and effective form since it can power almost all modern devices. However, the electricity …

Electrical Properties Of A Novel Solid Biopolymer Electrolyte Based On Algi-Nate Incorporated With Citric Acid, Ahmad Faizrin Ahmad Fuzlin, Noor Syahida Ismail, Yuki Nagao, Ahmad Salihin Samsudin

Makara Journal of Technology

In the present study, a novel solid biopolymer electrolyte (SBE) system is introduced by doping citric acid into alginate polymer. A sample of the alginate-citric acid SBE system was prepared via a solution casting technique. Using electrical impedance spectroscopy (EIS), the electrolytes of alginate-citric acid analyzed from 5 Hz to 1 MHz achieved the highest conductivity at 20 wt.% of 5.49 × 10-7 S cm-1. The temperature dependence of various citric acid amounts obeyed the Arrhenius rule with R2~1, where all SBE systems were thermally activated with increasing temperature. The dielectric studies of the alginate-citric acid SBE system showed non-Debye …

Numerical Study On Seakeeping Performance Of Hydrofoil Assisted Submersible Trimaran (Hast), Yuchen Lin

Theses and Dissertations

The present study focuses on the seakeeping characteristics of Hydrofoil Assisted Submersible Trimaran (HAST). The seakeeping performance is an important part in ship design because it effects the comfort, control, resistance and safety. The motions in wave will reduce the performance of ship which is designed and optimized in calm water. The heave and pitch motions of HAST in calm water and regular waves have been investigated by STAR CCM+, a CFD analysis program. The theory of numerical simulation based on STAR CCM+ has been presented. The basic theory of seakeeping performance studies has been discussed. A series of simulations …

The Tides They Are A-Changin’: A Comprehensive Review Of Past And Future Nonastronomical Changes In Tides, Their Driving Mechanisms And Future Implications, Ivan D. Haigh, Mark D. Pickering, J.A. Mattias Green, Brian K. Arbic, Arne Arns, Soenke Dangendorf, David Hill, David A. Jay, Multiple Additional Authors

Civil and Environmental Engineering Faculty Publications and Presentations

Scientists and engineers have observed for some time that tidal amplitudes at many locations are shifting considerably due to non-astronomical factors. Here we review comprehensively these important changes in tidal properties, many of which remain poorly understood. Over long geological time-scales, tectonic processes drive variations in basin size, depth, and shape, and hence the resonant properties of ocean basins. On shorter geological time-scales, changes in oceanic tidal properties are dominated by variations in water depth. A growing number of studies have identified widespread, sometimes regionally-coherent, positive and negative trends in tidal constituents and levels during the 19th, 20th and early …

Closed Loop Energy Maximizing Control Of A Wave Energy Converter Using An Estimated Linear Model That Approximates The Nonlinear Froude-Krylov Force, Yaqzan Mohd Yaqzan

Dissertations, Master's Theses and Master's Reports

Wave energy converters (WECs) exploit ocean wave energy and convert it into useful forms such as electricity. But for WECs to be successful on a large scale, two primary conditions need to be satisfied. The energy generated must satisfy the network requirements, and second, energy flow from waves to the grid needs to be maximized. In this dissertation, we address the second problem. Most control techniques for WECs today use the Cummins' linear model to simulate WEC hydrodynamics. However, it has been shown that under the application of a control force, where WEC motions are amplified, the linear model diverges …

Development Of A Fused Deposition 3d Printed Buoy And Method For Quantifying Wave Tank Reflections, Samantha G. Swartzmiller

Dissertations, Master's Theses and Master's Reports

Testing model scale prototypes is integral to the development of wave energy converter (WEC) technology. Model scale WECs are tested in wave tanks where they are subjected to repeatable wave fields. Their presence in water creates radiated waves that eventually reflect off tank walls disrupting the intended wave field. Fabrication of model scale WECs is another developing aspect of tank testing. Often model WECs are built of foam. Additive manufacturing is a promising alternative although the most common method, fused deposition modeling (FDM) 3D printing, does not typically produce waterproof parts. The goals of this work were 1) develop a …

Optimization And Control Of Arrays Of Wave Energy Converters, Jianyang Lyu

Dissertations, Master's Theses and Master's Reports

Wave Energy Converter Array is a practical approach to harvest ocean wave energy. To leverage the potential of the WEC array in terms of energy extraction, it is essential to have a properly designed array configuration and control system. This thesis explores the optimal configuration of Wave Energy Converters (WECs) arrays and their optimal control. The optimization of the WEC array allows both dimensions of individual WECs as well as the array layout to varying. In the first optimization problem, cylindrical buoys are assumed in the array where their radii and drafts are optimization parameters. Genetic Algorithms are used for …

Examination Of Ice Impactor And Mold, Matt Wilson

Williams Honors College, Honors Research Projects

This research project investigates impact and damage response of composite sandwich structures impacted with solid ice at extreme low-temperature. Composite sandwich structures of carbon fiber reinforced polymer sheets lining a polyvinyl chloride foam core are subjected to low-velocity impact at arctic temperatures. This impact will be delivered by a solid ice tool-tip via a drop impact testing machine. Data and test results acquired will be composed into a research report that will be submitted to The University of Akron and published in a scientific journal. This project builds upon the earlier study by Elamin, Li, & Tan (2018).

Surf Zone Tilt Current Meter, Troy Heitmann

Link Foundation Ocean Engineering and Instrumentation Fellowship Reports

Coastal tides and free surface gravity waves locally interact with the nearshore bathymetry generating spatially diverse circulation cells. Collectively, the cells form a current velocity flow field where net transport of geological, chemical, or biological, particulates takes place. Within the surf zone, dynamic instabilities lead to chaotic evolution and mixing, where single point, observations fail to quantitatively char­acterize the system as a whole. Governed by advanced theories, numerical models provide the necessary sampling resolution to study surf zone processes over large do­mains, but the model must be validated with field observations to draw meaningful conclusions. The acoustic Doppler current profiler …

Developing In Situ Dissolved Inorganic Carbon Dioxide Instrumentation, Beckett Colson

Link Foundation Ocean Engineering and Instrumentation Fellowship Reports

The ocean carbon system plays a critical role in regulating carbon dioxide content in the atmosphere. With increased anthropogenic carbon input, it is even more important to understand the system through measurements, models, and predictions. Unfortunately, the spatiotemporal resolution of ocean carbon system measurements is limited by a lack of in situ instrumentation. The support of the Link Foundation Ocean Engineering and Instrumentation Fellowship has enabled me to make significant progress in developing an in situ carbon system instrument for the deep sea. The instrument will measure both total dissolved inorganic carbon (DIC) and the partial pressure of carbon dioxide …

Link Foundation Fellowship Report, Eric Nieves

Link Foundation Ocean Engineering and Instrumentation Fellowship Reports

Magnetic anomaly detection (MAD) is a leading technique for the detection and localization of obscured magnetic targets via exploiting the field anomalies they create. This is especially true in marine environments when looking for unexploded ordnance (UXO), because the DC magnetic field is not highly influenced by numerous types of media (i.e. water) or weather conditions. MAD is also a passive technique, which allows it to go unnoticed by the target. Whereas current applications of MAD have been shown to be effective for localizing single targets at a time, the development of a method for multiple localization would the robustness …

Feasible Form Parameter Design Of Complex Ship Hull Form Geometry, Thomas L. Mcculloch

LSU New Orleans Theses and Dissertations

This thesis introduces a new methodology for robust form parameter design of complex hull form geometry via constraint programming, automatic differentiation, interval arithmetic, and truncated hierarchical B- splines. To date, there has been no clearly stated methodology for assuring consistency of general (equality and inequality) constraints across an entire geometric form parameter ship hull design space. In contrast, the method to be given here can be used to produce guaranteed narrowing of the design space, such that infeasible portions are eliminated. Furthermore, we can guarantee that any set of form parameters generated by our method will be self consistent. It …

Conversion Of Heat Energy From Cooling Water Of Diesel Engine To Electrical Energy Using Thermoelectric Generator, Muhammad Hasan Albana

Makara Journal of Technology

This research objective is to convert heat from the radiator fluid of a diesel engine to electrical energy by utilizing a thermoelectric generator (TEG). The TEG consists of 20 semiconductors (TE modules) and is equipped with a heat sink. The research shows that using the TEG, the heat of radiator fluid can be converted to electrical energy, although the electricity generated is small. The maximum electrical voltage generated by the TEG when modules were connected in series was 10 volts. When the TE modules were connected in parallel and series-parallel, the maximum voltages generated were 2.11 and 2.53 volts, respectively. …

Immittance Response On Carboxymethyl Cellulose Blend With Polyvinyl Alcohol- Doped Ammonium Bromide-Based Biopolymer Electrolyte, Norfatihah Mazuki, Yuki Nagao, Ahmad Salihin Samsudin

Makara Journal of Technology

The blended carboxymethyl cellulose (CMC) and polyvinyl alcohol (PVA) doped with various compositions of ammonium bromide (NH4Br)-based solid biopolymer electrolytes (SBEs) were prepared by using the casting method. In this present work, CMC/PVA–NH4Br SBE thin film was used to investigate the electrical conductivity via electrical impedance spectroscopy. The maximum conductivity obtained was 3.21 X 10−4 S cm−1 for sample AB20 at ambient temperature (303 K), and this result might be due to the increased number of charge carrier. A dielectric study was conducted to understand the conductivity behavior. The electrical properties have been measured as a function of frequency of …

Transition Metal Dichalcogenide For High-Performance Electrode Of Supercapacitor, Saifful Kamaluddin Muzakir, Ahmad Salihin Samsudin, Bouchta Sahraoui

Makara Journal of Technology

Molybdenum dichalcogenides have been reviewed from the perspectives of bandgap, conductivity, and oxidation states of transition metal. Researchers have concluded that a narrow-bandgap transition metal dichalcogenide with high conductivity could be achieved for the high-performance electrode of a supercapacitor.

Automated Compilation Test System For Embedded System, Mohamad Khairi Ishak, Ooi Jun Hwan, Teh Jiashen, Nor Ashidi Mat Isa

Makara Journal of Technology

Embedded system testing involves testing an integration of software and hardware. It is increasingly difficult to evaluate the functionality of each module within a short time because of the increasing number of tests required. In this paper, a novel stepwise methodology involving the use of an automated compilation test system (ACTS) is proposed, to improve the quality of testing and optimize the testing time using automation. Using the proposed method, the testing coverage can be maximized, while minimizing the manual work and testing time required. This ACTS was used to automate the test code compilation and execution for different hardware …

Activated Carbon Fixed-Bed Adsorber Design For Treating Chromium Hexavalent Wastewater, Tedi Hudaya, Velicia Rachmat

Makara Journal of Technology

Pollution caused by industrial wastewater containing heavy metals is a major issue, primarily due to its toxic nature. A cheap yet effective method to deal with such wastewater is activated carbon adsorption. The purpose of this research is to evaluate and design a fixed bed adsorber with granular activated carbon as an adsorbent to process wastewater-containing chromium hexavalent (Cr 6+). Experiments show that the Langmuir isotherm fits the equilibrium data as effectively as the Freundlich isotherm. Activated carbon used in this research is Jacobi 2000® derived from bituminous coal. The lab scale inlet volumetric flow is 100 mL/h with different …

A 2.3/3.3-Ghz Dual Band Low Noise Amplifier Using Switchable Load Inductor In 0.18-Um Cmos Technology, Taufiq Alif Kurniawan, Hsiao-Chin Chen

Makara Journal of Technology

In this paper, the dual band low noise amplifier is designed in 0.18-μm CMOS technology. By combining the proposed switchable load inductor for gain controlling and the conventional inductive source degeneration topology, narrow band gain and good impedance matching are achieved at 2.3/3.3-GHz frequency bands. The new mathematical analysis of low noise amplifier design is derived to define the component parameters of the proposed circuits. The proposed low noise amplifier exhibits gain of 17.18 dB and 15.5 dB, and noise figure of 2.67 dB and 2.52 dB at the two frequency bands, respectively.

Ascorbic Acid Degradation In Cut Lemon Packaged Using Oxygen Scavenging Active Film During Storage, Kurniawan Yuniarto, Setyo Purwanto, Bruce Ari Welt, Anang Lastriyanto

Makara Journal of Technology

Oxygen scavenging active film can be used to prevent diffusion of free oxygen due to the action of permeation mechanism. In this study, biodegradable oxygen scavenging plastic film was designed by incorporating an antioxidant agent into plasticized polylactic acid or PLA-PEG (PPLA). Butylated hydroxytoluene (BHT) was added at different concentrations into the matrix of the PPLA film using a direct casting method to produce oxygen scavenging active film. The antiradical activity of the oxygen scavenging active film was observed, which could be applied for preventing vitamin C degradation in cut lemon during storage. The antiradical activity of the active film …

The Importance Of Usability Aspect In M-Commerce Application For Satisfaction And Continuance Intention, Yassierli Yassierli, Vinsensius Vinsensius, M. S. Syed Mohamed

Makara Journal of Technology

There has been a rapid growing of m-commerce application in recent years due to the development of mobile communication technology and e-commerce business. However, only about 30% of online users, who conduct online searching, make online purchases. The low conversion rate seems to be correlated with poor usability aspect of most m-commerce applications and poor satisfaction reported by users. Research has reported that satisfaction and continuance intention in using m-commerce applications have relationships with service quality and information quality. In this study, a new model of user satisfaction and continuance intention in the context of mobile application was proposed by …

Development, Testing, Analysis, And Efficiency Of A Variable Area Dredge In Combination With A Mobile Ferrate-Based Treatment Facility, Leigh Ann Provost

Theses and Dissertations

This thesis proposal outlines the development and testing of a mobile slurry treatment trailer coupled with a variable area suction head and further expands on results and procedures shown in Feasibility of Muck Removal in the IRL Watershed and Subsequent Ferrate Treatment to Remove Excess Nutrients. The purpose of this thesis is to evaluate the efficiency and effectiveness of the suction head based on the percent solids maintained during dredging. This thesis also evaluates a scaled design and associated costs for a fully scaled dredging project utilizing the suction head. Additional statistics involving further fitting sediment data to a Weibull …

The Corrosion And Biofouling Characteristics Of Sealed Vs. Perforated Offshore Monopile Interiors: Experiment Design Comparing Corrosion And Environment Inside Steel Pipe, Monica M. Maher

Theses and Dissertations

This research addresses the need to improve on the existing methods for the corrosion control of the monopile interiors used to support wind powered turbines by incorporating a design that also enhances marine habitats and fisheries. Retrofitting monopile interiors with cathodic protection has been attempted on existing windfarms to mitigate corrosion, however, this can cause new problems including water acidification and hydrogen sulfide formation. Such chemistry changes can lead to unique localized corrosion concerns. This study investigated internal corrosion, chemistry and biofouling inside partially submerged hollow steel pipes. Watertight pipes with stagnant water inside were compared to pipes with holes …

Hydrodynamics Of An Anguilliform Swimming Motion Using Morison’S Equation, Naga Sasi Devarakonda

LSU New Orleans Theses and Dissertations

In this study, the hydrodynamic performance of anguilliform swimming motion is computed using Morison’s equation. This method was shown to predict the servo motor torques well. The anguilliform swimming motion is sinusoidal with increasing amplitude from head to tail. A “wakeless” swimming motion proposed by Vorus and Taravella (2011) with zero net circulation is considered.

This method is compared to the existing slender body theory and is validated with reference to the experimental results of NEELBOT-1.1 (Potts, 2015). The results for the study indicates that self-propulsion speed of the motion is independent of the oscillating tail amplitude at a constant …

Internet Traffic Forecasting Model Using Self Organizing Map And Support Vector Regression Method, Enrico Laoh, Fakhrul Agustriwan, Chyntia Megawati, Isti Surjandari

Makara Journal of Technology

Internet traffic forecasting is one of important aspect in order to fulfill the customer demand. So, the service quality of internet service provider (ISP) can be maintained at the good level. In this study self-organizing map (SOM) and support vector regression (SVR) algorithm are used as forecasting method. SOM is first used to decompose the whole historical data of traffic internet into clusters, while SVR is used to build a forecasting model in each cluster. This method is used to forecast ISPs traffic internet in Jakarta and surrounding areas. The result of this study shows that SOM-SVR method gives more …