Mechanical Engineering Commons^™

Fatigue And Fracture Of Electron Beam Melting Ti-6al-4v, William A. Grell

Electronic Theses and Dissertations

For applications in the aerospace field, selection of materials for a given design requires an understanding of critical properties, like fatigue and fracture, in addition to static mechanical and physical properties. With the ongoing advancements in metallic additive manufacturing techniques and the interest in applying the process to aerospace applications, there is a clear need to fully characterize properties. Arguably, the most attractive alloy for applications in aerospace is the Ti-6Al-4V alloy. The current dissertation examines the mechanical properties of the alloy, made by the Electron Beam Melting (EBM) Powder Bed Fusion (PBF) method. As illustrated in this work, the …

Life Cycle Energy Assesment Of Advanced Fiber Reinforced Composite Design And Manufacturing Methodologies, Urjit Lad

All Theses

Automotive industry at large is focused on vehicle light-weighting since a 6%-8% increase in fuel efficiency can be achieved with a 10% reduction in vehicle weight [1]. With the growing demand for cost-effective and sustainable light weighting of automobile structures, interest has increased in the application of fiber reinforced plastic (FRP) composites for use in the Body-in-White (BiW), which can account for up to 40% of the total vehicle weight. Traditional FRP composite manufacturing processes like vacuum assisted resin transfer molding, autoclave consolidation or use of automated fiber placement have been successfully used for marine and aerospace applications. However, these …

Chemical And Physical Interaction Mechanisms And Multifunctional Properties Of Plant Based Graphene In Carbon Fiber Epoxy Composites, Daniel W. Mulqueen

Mechanical & Aerospace Engineering Theses & Dissertations

Graphene has generated substantial interest as a filler due to its exceptional strength, flexibility, and conductivity but faces obstacles in supply and implementation. A renewable, plant-based graphene nanoparticle (pGNP) presents a more accessible and sustainable filler with the same properties as mineral graphenes. In this study, the mechanisms of graphene reinforcement in carbon fiber reinforced plastic (CFRP) were examined, along with the resulting improvements to mechanical strength, resistance to crack propagation, electrical and thermal conductivity at elevated temperatures. pGNP, produced from renewable biomass, was shown to have a graphitic structure with flakes 3-10 layers thick and a median lateral size …

Multiscale Modeling And Gaussian Process Regression For Applications In Composite Materials, Joshua Arp

All Dissertations

An ongoing challenge in advanced materials design is the development of accurate multiscale models that consider uncertainty while establishing a link between knowledge or information about constituent materials to overall composite properties. Successful models can accurately predict composite properties, reducing the high financial and labor costs associated with experimental determination and accelerating material innovation. Whereas early pioneers in micromechanics developed simplistic theoretical models to map these relationships, modern advances in computer technology have enabled detailed simulators capable of accurately predicting complex and multiscale phenomena.

This work advances domain knowledge via two means: firstly, through the development of high-fidelity, physics-based finite …

Double Cantilever Beam Mode-I Testing Validation In Large-Scale Additive Manufacturing Carbon Composite, Luis Alfonso Camacho

Open Access Theses & Dissertations

Testing for mechanical properties for additive manufacturing has been based on already existing standards for traditional manufacturing methods. For composites in large scale additive manufacturing there is a research gap in bond strength and fracture toughness for a single layer interface. By using Double cantilever beam Mode I, this thesis manuscript validates testing parameters and protocols to describe the intricacies of ABS matrix 20 wt.% carbon filled composite, specifically on the layer-to-layer interface. Studies suggest that fracture toughness is sensitive to process parameters, like deflection speed and sharpened crack tip at the layer interface of BAAM 3D printed part and …

Characterization Of Mechanically Recycled Polylactic Acid (Pla) Filament For 3d-Printing By Evaluating Mechanical, Thermal, And Chemical Properties And Process Performance, Mahsa Shabani Samghabady

All Theses

Polylactic acid (PLA) is a biopolymer made from renewable resources such as sugar and corn. PLA filament is a popular material used in Fused Deposition Modeling (FDM) 3D-printing. While this material has many advantages, all the failed parts, support structures, rafts, nozzle tests, and the many prototype iterations during the 3D-printing process contribute to the plastic pollution and release of greenhouse gases. Although PLA is biodegradable, it can take years to degrade in landfills. Instead of throwing away PLA waste and buying new filaments, PLA can be recycled. Amongst the different recycling technologies, mechanical recycling is the most environmentally friendly. …

Mechanical Properties Of Biocomposite With Various Composition Of Caco3 And Starch, Agris Setiawan, Fransisca Diana Wahyuningsih, Riria Zendy Mirahati

Journal of Mechanical Engineering Science and Technology (JMEST)

Calcium carbonate has the potential to be used in the development of medical materials, including biomaterials. Biocomposite is composed of CaCO3 as matrix material and bioplastic from the combination of corn starch and cassava starch as reinforcement. This study aims to determine mechanical properties such as tensile strength and bending/flexural strength with varying compositions of CaCO3 and bioplastic. Characterization of the biocomposite uses Scanning Electron Microscope to observe the microstructure and composition elements of their structure. This study used 4 variations in the ratio of CaCO3 suspension: (Corn Starch + Cassava Starch). Each sample was characterized using specimen code A …

Synthesis And Characterization Of Nitrogen-Doped Activated Carbon For Lithium Battery Anode Applications, Prihanto Trihutomo, Poppy Puspitasari, Muhammad Bustomi Radja, Milzam Rahmat Busono

Journal of Mechanical Engineering Science and Technology (JMEST)

Nitrogen-dopped activated carbon was synthesized to see its effect on the characterization of the nitrogen surface functional groups, crystal size, and morphology of the resulting sample. Synthesis of nitrogen-doped activated carbon was carried out by varying the addition of Urea as a nitrogen doping source. Activated carbon compared its characteristics with variations in the concentration of added Urea to activated carbon, at 1:3 and 1:5. The FTIR results obtained were the presence of functional groups indicating the presence of nitrogen bonds in each sample. The crystallinity results showed that the samples were classified as crystalline and nitrogen doping influenced the …

Designing A Naabsa Class Tanker Ship With Bottom Protection From Ground, Victor A. Kulesh, Mathias B. Prasetio, Fam Chung Hiep

Journal of Mechanical Engineering Science and Technology (JMEST)

Indonesia is the world's largest archipelago country with a high potential for economic development and top producer and exporter of palm oil. As an archipelago country, the most efficient cargo transportation routes are through rivers and seas. Designing and building tankers, taking into account the specifics of the operation, are relevant. The paper considers the issues of designing a tanker for the transportation of crude palm oil with a defined operation area and route. The general concept of the vessel is proposed, taking into account the restrictions on the navigation area and draft for operation in the river. Particular attention …

Effect Of Grafting Nano-Tio2 On Sansevieria Cylindrica Fiber Properties, Chrisrulita Sekaradi Wiguna, Heru Suryanto, Aminuddin Aminuddin, Jibril Maulana, Joseph Selvi Binoj, Alamry Ali

Journal of Mechanical Engineering Science and Technology (JMEST)

Natural fibers, which are abundant, environmentally friendly, and biodegradable, are used as a replacement for synthetic fibers. The composite strength can be increased by treating the surfaces of natural fibers with suitable chemicals, which can also improve the interface interaction between fiber and matrix. Application of a coupling agent in chemical treatment is utilized to reinforce the bonding between fiber and matrix. The objective of the study is to determine the influence of silane concentration on the Sansevieria cylindrica fiber properties. The methods included fibers treatment using ethanol and coupling agent as dissolving and TiO2 with concentrations of 0%, 0.25%, …

The Combustion Characteristics Of Calophyllum Inophyllum Fuel In The Presence Of Magnetic Field, Imam Rudi Sugara, Nasrul Ilminnafik, Salahuddin Junus, Muh Nurkoyim Kustanto, Yuni Hermawan

Journal of Mechanical Engineering Science and Technology (JMEST)

The study objective is to investigate the combustion characteristics of Callophyllum inophyllum fuel in presence of a magnetic fields. To conduct the experiment, a bunsen burner was utilized, with fuel and air being dispensed via a syringe pump and compressor, both regulated by a flowmeter. The fuel and air pipes were heated to 532.15 (K) to facilitate fuel evaporation. The equivalent ratio of 0.5, 1, and 1.5 was adjusted to control air discharge and fuel. An 11,000 gausses artificial magnet was used, with N-S, N-S, N-N, and SS being the various magnetic pole configurations. The study found that the magnetic …

Effect Of Current And Pulse-On Time On Material Removal Rate And Surface Roughness Of Tungsten Carbide In Electric Discharge Machine Die-Sinking, Mochamad Deny Riyanto, Andoko Andoko, Heru Suryanto

Journal of Mechanical Engineering Science and Technology (JMEST)

The focus of manufacturing for tungsten carbide applications often demands a smooth surface quality as the result of the Electric Discharge Machine (EDM) die-sinking process, especially in the manufacture of die and mold with tungsten carbide material processed using a die-sinking EDM machine. The purpose of this study is to analyze the effect of electric current and pulse-on time on the Material Removal Rate (MRR) and surface roughness of tungsten carbide. Through the experimental method, the parameters varied, namely electric current 17 A, 20 A, 23 A, and pulse-on time 30 µs, 55 µs, and 80 µs. MRR was calculated …

Lap Joint On St.37 Steel Plate With Friction Welding Clamping Method, Widia Setiawan, Nugroho Santoso, Wiyadi Wiyadi, Muhammad Sulistiyo Aji, Rachmat Alamin, Achsan Tarmudi

Journal of Mechanical Engineering Science and Technology (JMEST)

Friction stir (FW) welding is a relatively fresh method that was created and has been continually refined and adapted to industrial applications due to its benefits. This approach for solid-state joining entails connecting the components at a temperature below their melting point and then heating them up. Clamp joint applications are widely used using external heating and hitting with high strength, but the clamped joints with the FW method are rarely done. The research studied the characteristic of clamped joints at various plate thicknesses using the FW method. In this study, 30 specimens were used in the form of a …

The Effect Of Cutting Speed Of Nitrogen Laser Cutting On The Surface Texture Of Sus 304 Plate, Yanuar Rohmat Aji Pradana, Raka Afrianto, Chandra Hairat Abdul Rahman, Andoko Andoko

Journal of Mechanical Engineering Science and Technology (JMEST)

The focus of today’s machining industry is on how to maintain high productivity and low cost achieved by high tool life during the operation. Laser cutting is considered the right solution because it offers cutting speeds of up to 170000 mm/min through a non-contact process regardless of the workpiece material hardness. The aim of this study is to analyze the effect of cutting speed on the surface texture aspects namely surface roughness, kerf shape, and dross height on the stainless steel 304 plate after laser cutting. The nitrogen laser was utilized with the cutting speed of 400, 1700, and 2000 …

Analysis Of Fire And Smoke Spread In Ki Hajar Dewantara Auditorium, State University Of Jakarta, Using Fire Dynamics Simulator, Pratomo Setyadi, Ariq Harits Arrizq

Journal of Mechanical Engineering Science and Technology (JMEST)

Fire behavior and smoke spread are influenced by various factors, including the amount and condition of combustible material, ventilation openings, and ceiling height. A high amount of combustible material in the auditorium poses a significant fire hazard, hence, efforts need to be made to minimize the risk. One approach is to use Computational Fluid Dynamic software, such as Fire Dynamics Simulator (FDS), to model fire combustion. In this research, it provides an overview of the heat release rate (HRR) of fires that occur as well as the effect of differences in ceiling height and the effect of ventilation on fire …

Effect Of Temperature Variations Of Corn (Maize) Oil Biodiesel On Torque Values And Thermal Efficiency Of Diesel Engines, Suardi Suardi, Rodlian Jamal Ikhwani, Ade Putri Rezki Aulia

Journal of Mechanical Engineering Science and Technology (JMEST)

The trend of consumption of hydrocarbon fuels in Indonesia, which is increasing every year, is not accompanied by the amount of production, which is decreasing. Alternative fuels to reduce dependence on hydrocarbon fuels. One form of alternative fuel is biodiesel, which is made from corn (maize) oil. Corn oil itself, if processed, can be an option for clean and environmentally friendly energy option and that is the main objective of this research is to determine the performance of biodiesel corn oil on diesel engines. The method used in this study is an experimental method where corn oil biodiesel is tested …

Optimization Of Alti Pld Coating By Increasing Ti Content, N2 And Annealing Which Used For Skd61 Pins In Aluminum Die Casting, Rusman Kosasih, Maria Margaretha Suliyanti Prof, Dedi Priadi, Wisnu Usni

Journal of Materials Exploration and Findings

The Alumunium Titanium Nitrogen (AlTiN) coating is known as one of the best coating materials for protective coating, while Pulsed Laser Deposition (PLD) is a laser coating process used for electric layer and superconductor applications, producing thin films up to 20 µm in thickness. The combination of these two matters has already been researched and is still in progress. One major challenge in the aluminium casting industry is to minimize the damage caused to tool steel pins made from SKD61, when aluminium material sticks to the pin, and halting production. Therefore, research on effective coatings for tool steels and testing …

Effect Of Heat Input On Microstructure And Mechanical Properties Of Submerged Arc Welded Sm570-Tmc Steel, Toni Yuhandri, Winarto Winarto, Diana Natalia

Journal of Materials Exploration and Findings

SM570TMC is high-strength steel (HSS), which is commonly used in structures that require higher-strength components. In this research, submerged arc welding (SAW)-welded SM570 TMC steels' microstructure and mechanical characteristics were examined. SM570 plates with 12mm thickness were multi-pass welded by using a 3.0 mm diameter of ESAB OK Autrod 13.40 (AWS A5.23: EG) filler metal. The joint design is a single V multi-pass butt weld with a backing strip. Two welded joints were prepared by using heat inputs of 2.2 and 2.9 kJ/mm. The microstructures of two welded joints were observed by using optical microscopy and scanning electron microscope (SEM). …

The Effect Of Current Density And Hard Chrome Coating Duration On The Mechanical And Tribological Properties Of Aisi D2 Steel, Indah Uswatun Hasanah, Dedi Priadi, Donanta Dhaneswara

Journal of Materials Exploration and Findings

The effect of hard chromium coating on AISI D2's mechanical properties and wear resistance has been investigated using the electrolysis technique with varying current and coating duration. The variations of current used are 0.8 A, 1.2 A, and 1.6 A, while the coating duration used are 300, 600 and 900 seconds. Characterization of the films was conducted using SEM-EDS, and XRD. It can be observed from SEM characterization that the chrome grains resulted from the electroplating process are fine. The XRD identify chrome compund on the surface coating. The highest hardness value was 520.6 HV on a sample with a …

The Effect Of Heat Treatment And Chemical Treatment On Natural Fibre To The Durability Of Wood Plastic Composites – A Review, Nuratiqah Asyiqin Mohd Nasharudin, Nur Fatihah Sulaiman, Nurul Aziemah Mohammad, Wan Nor Raihan Wan Jaafar, Falah Abu Dr., Siti Norasmah Surip

Journal of Materials Exploration and Findings

The application of WPC is not only limited to indoor applications but has been extended to exterior applications where properties of WPC could compromise during service life. WPC was derived from wood fiber of various sizes to reinforce polymers. Wood fiber has the advantage of a cheaper price, being abundantly available, and ease of processing, however, the critical factor is its hydrophilic nature, where moisture absorption is likely to occur. Thus, treatments for reducing the hydrophilicity of wood fibers are applied. By treatment of wood fiber, the surface impurities were removed, leaving the roughened surface of fibers, thus providing a …

A Strong And Ductile Cobalt-Free Solid-Solution Fe30ni30mn30cr10 Multi-Principal Element Alloy From Hot Rolling, Hans Pommerenke, Jiaqi Duan, Nathan Curtis, Victor Delibera, Adam Bratten, Andrew Hoffman, Mario Buchely, Ronald O'Malley, Haiming Wen

Materials Science and Engineering Faculty Research & Creative Works

Most of the face-centered cubic (FCC) multi-principal element alloys (MPEAs) developed thus far contain cobalt. for many applications, it is either required or beneficial to avoid cobalt, since cobalt has long-term activation issue (for nuclear applications), is expensive, and is considered a critical material. in addition, FCC structured solid-solution MPEAs tend to have relatively low strength. an FCC solid-solution Fe30Ni30Mn30Cr10 (at %) MPEA was fabricated via arc melting, followed by homogenization at 1100 °C for 12 h. the alloy was hot rolled at 1100 °C with a total reduction of up to 97 %. the microstructure was characterized, and mechanical …

The Plastics Collection Reference Packet, Special Collections Research Center

Special Collections Research Center

This reference packet is an informational tool to support further research into the history of plastics—whether interested in companies, individuals within the plastics industry's history, historical plastics materials, essays, and more. All content featured within this packet was previously published on the former plastics.syr.edu website as part of a Syracuse University Libraries and Special Collections Research Center (SCRC) partnership established in 2007 with the Plastics Pioneers Association (PPA)—an association of plastics industry professionals interested in preserving the plastics industry's past.

Additive Manufacturing Of Stretchable Strain Sensors: Fabrication, Optimization And Application, John Nady Shihat Bastawrous

Theses and Dissertations

In this project, a novel strain sensor design is fabricated employing different additive manufacturing techniques. The spring sensor's primary material is PLA-Like resin with a nanocomposite encapsulation layer as the functional material. The main principle of Straining the sensors results in a change in resistivity as the distances among the conductive carbon particles change according to the strain applied.

Sensor fabrication consists of two parts: spring manufacturing and development of nanocomposite encapsulation The nanocomposite matrix is developed through the dispersion of Graphene and Carbon nanotubes in Thermoplastic Polyurethane through sonication and magnetic hotplate stirring. While the spring itself is manufactured …

Uncovering Transient Dynamics And Equilibrium States Of Particle Aggregates With RaúL BayoáN Cal, RaúL BayoáN Cal

PDXPLORES Podcast

In this episode of PDXPLORES, Raúl Bayoán Cal, Professor of Mechanical & Materials Engineering at the Maseeh College of Engineering and Computer Science, discusses his latest National Science Foundation award-winning research, Uncovering Transient Dynamics and Equilibrium States of Particle Aggregates in Fluids, investigating transient dynamics of fluid mechanics in the absence of gravity. These experiments, which utilize the Dryden Drop Tower and research facilities aboard the International Space Station, will benefit the study of granular media in aggregation models such as pollen deposition, algae growth, and plastic pollution.

Click on the "Download" button to access the audio transcript.

Fungi In Flux | Designing Regenerative Materials And Products With Mycelium, Arvind Bhallamudi

Masters Theses

As the world grapples with the escalating crisis of climate threats and environmental degradation, this research delves into the synergistic potential of design and biology, developing safe and sustainable materials for applications in prototyping, furniture and interior design. Harnessing the power of a unique organism - fungi, the study proposes an accessible, efficient, and resilient material resource system. It utilizes local waste streams and mycelium (the vegetative part of fungi) to grow functional structures. An experimental and small-scale protocol is modeled by testing bio-fabrication and bio-printing methods. The composites' performance qualities and characteristics are evaluated through mechanical testing and a …

The Modernization Of Large Power Transformer Tanks, Babajide O. Williams

Electronic Theses and Dissertations

Due to the current demands placed on the power grid in terms of climate change, increasing urbanization, and terrorist attacks, the U.S. government in response to these demands, mandated that all the grid components be modernized in order to increase their reliability. As a critical component of the grid, Large Power Transformers (LPTs) play a key role in ensuring sustainable power generation and distribution. A literature search performed in this work and the analysis of data retrieved from the search showed that the tanks of these LPTs are critical to their durability, longevity, and reliability. Therefore, the reliability of LPTs …

Morphology And Hemodynamics Of Cerebral Arteries And Aneurysms In A Rare Pair Of Monozygotic Twins, Hang Yi, Zifeng Yang, Luke C. Bramlage, Bryan R. Ludwig

Mechanical and Materials Engineering Faculty Publications

In this preliminary study, the underlying pathophysiology mechanisms of cerebral aneurysms (CAs) in monozygotic twins (MTs) were investigated via a rare pair of MTs (twin A and twin B) involving four reconstructed arterial models using preclinical information. First, dimensions and configurated outlines of three-perspective geometries were compared. Adopting an in-vitro validated numerical CA model, hemodynamic characteristics were investigated in the MTs, respectively. Despite expected genetic similarities, morphological comparisons show that configurations of cerebral arteries exhibit significant differences between the twins. The ICA size of twin A is larger than that in twin B (2.23~25.86%), varying with specific locations, attributing to …

3d Printed Aircraft, Matthew Nagy, Charles D'Amico, Alexis Salgado Medina

Mechanical Engineering

This project is to design, build, and test a 3D-printable aircraft. The goal is to create a final design that will be able to fly for the longest duration possible, around 20 seconds. To determine the correct preliminary design and manufacturing process for a 3D printed RC aircraft, an analysis of multiple design options and manufacturing materials was performed. This allowed for a variety of choices for aircraft type, airfoil design, structure, among other topics to be narrowed down to the most promising option. It has been found that the aircraft will follow a design similar to industry motor-gliders, with …

Thermal Transport And Physical Characteristics Of Silver-Reinforced Biodegradable Nanolubricant, Jaime Taha-Tijerina, Karla Aviña, Nicolás Antonio Ulloa-Castillo, Dulce Viridiana Melo-Maximo

Informatics and Engineering Systems Faculty Publications

In this investigation, the thermal transport behavior of biodegradable lubricant reinforced with silver nanostructures (AgNs) at various filler fractions of 0.01, 0.05, 0.10, and 0.20 weight percent was evaluated over a temperature scan analysis, ranging from room temperature up to 60 °C. The experimental results revealed significant gradual enhancements in thermal conductivity as AgNs concentration and evaluating temperatures were increased. These improvements showed the important role of nanostructures’ interaction within the biodegradable lubricant. The thermal conductivity performance improved for nanolubricants ranging from 6.5% at 30 °C and 0.20 wt.% AgNs content up to a maximum 32.2%, which was obtained at …

Flexural Wave Manipulation By Non-Hermitian Planar Elastic Metasurface, Katerina Stojanoska

Theses and Dissertations

It has been demonstrated that metasurfaces with spatially asymmetric inner geometry exhibit unidirectional scattering effects, which can be used to control waves in a directional fashion. In this thesis, a planar Non-Hermitian elastic metasurface exhibiting unidirectional focusing of flexural waves is proposed. Asymmetrically loaded piezoelectric disks and metallic blocks comprise the unit cells. By using a negative capacitance shunting, a tunable material loss is embedded into the system. With suitable engineering of the induced loss profile, resonating building blocks are designed, which are capable of independently accessing unidirectional zero reflection. A planar metasurface is then created so that constructive interference …