Mechanical Engineering Commons^™

Additive Manufacturing Of Aluminum Alloy By Metal Fused Filament Fabrication (Mf3)., Luke J. Malone

Electronic Theses and Dissertations

This research studies metal-fused filament fabrication (MF3) for manufacturing aluminum alloy parts. An aluminum alloy powder-based feedstock with a polymer-binder system was extruded via capillary rheometry to form a filament. The filament was used to print green parts that were involved in a two-step debinding process combining solvent and thermal extraction of the polymer binder, then sintered in a partial vacuum. Resulting grain structure, sintered density, and mechanical properties will be characterized and compared to metal injection molded (MIM) specimens. The main objective is to gain an understanding of the MF3 process characteristics and the ensuing material properties and microstructure …

Passive Prosthetic Ankle Design Based On Indonesian Anthropometry, Wahyu Dwi Lestari

Journal of Mechanical Engineering Science and Technology (JMEST)

Foot prosthesis is a replacement for the foot to overcome activity limitations due to disease, birth defects, accidents, or amputations. Many foot prosthetics have been developed in recent years to treat patients. However, prostheses on the market today have drawbacks, including their high price, lack of comfort, stiff ankles, and low durability. The main objective of this study is to develop an existing ankle-foot prosthesis design that approximates the resemblance of a human foot according to the anthropometry of Asians, especially Indonesians. This study contains the design of a prosthetic foot with a skin design model and a support core. …

Surface Quality Of Fe, Ni And Cr Added Hyper-Eutectic Al-Si Automotive Alloys Under Up-Milling And Down-Milling Operation, Akib Abdullah Khan, Mashiur Rahman Shoummo, Mohammad Salim Kaiser

Journal of Mechanical Engineering Science and Technology (JMEST)

Effect of the elements Fe, Ni, and Cr on the surface quality under machining of hyper-eutectic aluminiumbased Al-Si automotive alloys has been carried out as the elements improve the properties of this alloy. Machining is done on a horizontal type milling machine using a high-speed steel slab milling cutter in dry condition. Only the cutting speed varies throughout the experiment, while the machining feed and depth of cut remain fixed. The experimental results show that the addition of these alloying elements increases the roughness and hardness specially due to formation of Fe-rich intermetallic ��-����5��������. However, the needle-like ��-����5�������� has been …

Effect Of Variation Of Sic Mass Fraction On Mechanical Properties Of Al-Sic Composite Using Stir Casting Method, Sumarji Sumarji, Naufal Fardio Albajili, Mahros Darsin, Rahma Rei Sakura, Andi Sanata

Journal of Mechanical Engineering Science and Technology (JMEST)

Al-SiC is a composite composed of AA6061 as a matrix and SiC as a reinforcement particle. The variation of mass added will affect the mechanical properties of the composite because Al-SiC is hardenable, which means that its mechanical properties can be improved by adding the reinforcement component. However, an excessive portion of SiC leads to a decrease in mechanical properties. The purpose of this study was to find the optimal composition of the addition of SiC into the aluminium matrix to gain maximum tensile strength and hardness. The mass fraction variation that would be used in this composite was the …

Effect Of Homogenization Pressure On Bacterial Cellulose Membrane Characteristic Made From Pineapple Peel Waste, Muhamad Muhajir, Heru Suryanto, Yanuar Rohmat Aji Pradana, Uun Yanuhar

Journal of Mechanical Engineering Science and Technology (JMEST)

Many studies were conducted to maintain the environment by reducing the waste, especially pineapple peel waste. This study aims to explore the effect of various pressure of the homogenization process on bacterial cellulose membrane surface morphology and structure produced using extract of pineapple peel waste. The methods include the preparation of pellicle samples from the product of the fermentation process of Acetobacter xylinum using a medium from the extract of pineapple peel waste. Bacterial cellulose pellicles were crushed using a blender. Mashed bacterial cellulose pellicle was homogenized in High-Pressure Homogenizer with pressure variation of 150 bar, 300 bar, 450 bar, …

Machine Vision For The Various Road Surface Type Classification Based On Texture Feature, Susi Marianingsih, Widodo Widodo, Marla Sheilamita S. Pieter, Evanita Veronica Manullang, Hendry Y. Nanlohy

Journal of Mechanical Engineering Science and Technology (JMEST)

The mechanized ability to specify the way surface type is a piece of key enlightenment for autonomous transportation machine navigation like wheelchairs and smart cars. In the present work, the extracted features from the object are getting based on structure and surface evidence using Gray Level Co-occurrence Matrix (GLCM). Furthermore, K-Nearest Neighbor (K-NN) Classifier was built to classify the road surface image into three classes, asphalt, gravel, and pavement. A comparison of KNN and Naïve Bayes (NB) was used in present study. We have constructed a road image dataset of 450 samples from real-world road images in the asphalt, gravel, …

Gasohol Engine Performance With Various Ignition Timing, Hendry Y. Nanlohy, Suyatno Suyatno, Helen Riupassa, Marthina Mini, Trismawati Trismawati, Mebin Panithasan

Journal of Mechanical Engineering Science and Technology (JMEST)

Experimental research has been conducted on the effect of ignition timings on the characteristics and performance of gasohol engines such as power, torque, specific fuel consumption, and thermal efficiency. The fuel used in this research is pure gasoline and a mixture of 50% bioethanol (BE50). The results show that the ignition timing that gives the maximum effect occurs at the top and bottom dead points of 9 degrees for gasoline and 12 degrees for BE50 fuel. Furthermore, the maximum power is obtained at 6,500 rpm, and at an ignition time of 12 degrees BTDC the maximum power generated is 4.63 …

Bbt Acoustic Alternative Top Bracing Cadd Data Set-Norev-2022jun28, Bill Hemphill

STEM Guitar Project’s BBT Acoustic Kit

This electronic document file set consists of an overview presentation (PDF-formatted) file and companion video (MP4) and CADD files (DWG & DXF) for laser cutting the ETSU-developed alternate top bracing designs and marking templates for the STEM Guitar Project’s BBT (OM-sized) standard acoustic guitar kit. The three (3) alternative BBT top bracing designs in this release are
(a) a one-piece base for the standard kit's (Martin-style) bracing,
(b) 277 Ladder-style bracing, and
(c) an X-braced fan-style bracing similar to traditional European or so-called 'classical' acoustic guitars.

The CADD data set for each of the three (3) top bracing designs includes …

Machine Learning Approach For Classifying Power Outage In Secondary Electric Distribution Network, Stephan Mgaya, Hellen Maziku

Tanzania Journal of Engineering and Technology (TJET)

Power outage is the problem that hinders social and economic development especially for developing countries like Tanzania. Frequent power outages damage electric equipment, and negatively affect the industrial production process. Power outages cannot be completely eradicated due to uncontrolled cause like natural calamities but technical challenges can be managed and hence reducing power outages. The existing manual methods used to locate power outage like customer calls is inefficient and time consuming. On the other hand, modern method like the Advanced Metering Infrastructure (AMI) still faces a challenge in effectively classifying power line outage due to the nature of imbalanced datasets. …

An Iot Based Worker Safety Helmet Using Cloud Computing Technology, Yuthriya Iddi Khamis, Mahmoud Alawi, Waheed Muhammad Sanya

Tanzania Journal of Engineering and Technology (TJET)

Miner safety and security is a major challenge around the world due to the exposure to toxic gases that are frequently released in underground mines. Miners' health is adversely affected primarily by toxic gases, which endanger the workers' lives. Furthermore, human sensory abilities do not detect these dangerous gases. As a result, this paper proposes a safety monitoring system that includes a temperature sensor, humidity sensor, and gas sensors to detect harmful gases and alert miners to those harmful gases using the smart helmet they wear. These gases are transmitted to the control station via the cloud using Internet of …

Octopus-Inspired Adhesive Skins For Intelligent And Rapidly Switchable Underwater Adhesion, Sean T. Frey, A. B. M. Tahidul Haque, Ravi Tutika, Elizabeth V. Krotz, Chanhong Lee, Cole B. Haverkamp, Eric J. Markvicka, Michael D. Bartlett

Department of Mechanical and Materials Engineering: Faculty Publications

The octopus couples controllable adhesives with intricately embedded sensing, processing, and control to manipulate underwater objects. Current synthetic adhesive–based manipulators are typically manually operated without sensing or control and can be slow to activate and release adhesion, which limits system-level manipulation. Here, we couple switchable, octopus-inspired adhesives with embedded sensing, processing, and control for robust underwater manipulation. Adhesion strength is switched over 450× from the ON to OFF state in <50 ms over many cycles with an actively controlled membrane. Systematic design of adhesive geometry enables adherence to nonideal surfaces with low preload and independent control of adhesive strength and adhesive toughness for strong and reliable attachment and easy release. Our bio-inspired nervous system detects objects and autonomously triggers the switchable adhesives. This is implemented into a wearable glove where an array of adhesives and sensors creates a biomimetic adhesive skin to manipulate diverse underwater objects.

A Pilot Study On The Nanoscale Properties Of Bone Tissue Near Lacunae In Fracturing Women, Wen Qian, Roman Schmidt, Joseph A. Turner, Sue P. Bare, Joan M. Lappe, Robert R. Recker, Mohammed P. Akhter

Department of Mechanical and Materials Engineering: Faculty Publications

The goal of this study is to investigate the causes of osteoporosis-related skeletal fragility in postmenopausal women. We hypothesize that bone fragility in these individuals is largely due to mineral, and/or intrinsic material properties in the osteocyte lacunar/peri-lacunar regions of bone tissue. Innovative measurements with nanoscale resolution, including scanning electron microscope (SEM), an atomic force microscope that is integrated with infrared spectroscopy (AFM-IR), and nanoindentation, were used to characterize osteocyte lacunar and peri-lacunar properties in bone biopsies from fracturing (Cases) and matched (Age, BMD), non-fracturing (Controls) postmenopausal healthy women. In the peri-lacunar space, the nanoindentation results show that the modulus …

Microfluidic Device For Localized Electroporation, Justin Brooks, Arian Jaberi, Ruiguo Yang

Department of Mechanical and Materials Engineering: Faculty Publications

Electroporation is a common method of transfection due to its relatively low risk and high transfection efficiency. The most common method of electroporation is bulk electroporation which is easily performed on large quantities of cells yet results in variable levels of viability and transfection efficiency across the population. Localized electroporation is an alternative that can be administered on a similar scale but results in much more consistent with higher quality transfection and higher cell viability. This paper discusses the creation and use of a simple and cost-effective device using porous membrane for performing localized electroporation.

Phase Space Analysis Of Nonlinear Wave Propagation In A Bistable Mechanical Metamaterial With A Defect, Mohammed A. Mohammed, Piyush Grover

Department of Mechanical and Materials Engineering: Faculty Publications

We study the dynamics of solitary waves traveling in a one-dimensional chain of bistable elements in the presence of a local inhomogeneity (`defect'). Numerical simulations reveal that depending upon its initial speed, an incoming solitary wave can get transmitted, captured or reflected upon interaction with the defect. The dynamics are dominated by energy exchange between the wave and a breather mode localized at the defect. We derive a reduced-order two degree of freedom Hamiltonian model for wave-breather interaction, and analyze it using dynamical systems techniques. Lobe dynamics analysis reveals the fine structure of phase space that leads to the complicated …

Effects Of Pulsatile Flow Rate And Shunt Ratio In Bifurcated Distal Arteries On Hemodynamic Characteristics Involved In Two Patient-Specific Internal Carotid Artery Sidewall Aneurysms: A Numerical Study, Hang Yi, Mark Johnson, Luke C. Bramlage, Bryan Ludwig, Zifeng Yang

Mechanical and Materials Engineering Faculty Publications

The pulsatile flow rate (PFR) in the cerebral artery system and shunt ratios in bifurcated arteries are two patient-specific parameters that may affect the hemodynamic characteristics in the pathobiology of cerebral aneurysms, which needs to be identified comprehensively. Accordingly, a systematic study was employed to study the effects of pulsatile flow rate (i.e., PFR−I, PFR−II, and PFR−III) and shunt ratio (i.e., 75:25 and 64:36) in bifurcated distal arteries, and transient cardiac pulsatile waveform on hemodynamic patterns in two internal carotid artery sidewall aneurysm models using computational fluid dynamics (CFD) modeling. Numerical results indicate that larger PFRs can cause higher wall …

Real-Time Data Analytics For Monitoring Electricity Consumption Using Iot Technology, Waheed Muhammad Sanya, Gaurav Bajpai, Omar Haji Kombo, Evariste Twahirwa

Tanzania Journal of Engineering and Technology (TJET)

Rising electricity bills as a result of climate variability and new home electrical and electronic appliances are becoming a major source of concern for most end users. Consumers are typically unaware of their household electricity consumption patterns and the costs associated with them, making proper planning and budgeting difficult. Monitoring and controlling energy consumption on appliances can reduce energy costs for end-users. The Internet of Things (IoT) has the potential to provide remote monitoring and control of devices via automated monitoring and control. In this study, we propose an IoT-enabled system for monitoring and controlling energy consumption in homes to …

Group-Based Data Offloading Techniques Assisted By D2d Communication In 5g Mobile Network, Juma S Ally

Tanzania Journal of Engineering and Technology (TJET)

Machine type communication devices proposed as one of the substantial data collections in the 5G of wireless networks. However, the existing mobile communication network is not designed to handle massive access from the MTC devices instead of human type communication. In this context, we propose the device-to-device communication assisted a mobile terminal (smartphone) on data computing, focusing on data generated from a correlated source of machine type communication devices. We consider the scenario that the MTC devices after collecting the data will transmit to a smartphone for computing. With the limitation of computing resources at the smartphone, some data are …

Assessment Of Energy Efficiency In Beverage Industry, Mahamudu H. Mtebwa

Tanzania Journal of Engineering and Technology (TJET)

The brewery industry has a significant contribution to the national income. However, it is also associated with energy intensive processes and pollution. In this work, the energy efficiency assessment of the largest brewery in Tanzania i.e., Tanzania Breweries Limited has been conducted. Energy consumption analysis was conducted according to IEEE SA 739 1995. Important parameters used to assess brewery energy efficiency were boiler efficiency and losses, equipment energy productivity as well as load factor. It was found that the main energy consumers are packaging (54.63%), brewing (29.30%) and utilities (15.17%). More importantly, it was found that about 68% of the …

A Model For Sustainable Adoption Of Solar Photovoltaic Technology In Tanzania, Joseph Kihedu

Tanzania Journal of Engineering and Technology (TJET)

The aim of the study was to develop a sustainable model for enhancement of the solar PV technology adoption in Tanzania. The model was developed based on the identified barriers that hinder the adoption of solar PV technology and adopted the best strategies from successful projects. Further, the drivers and activities were developed based on selected best strategies from successful projects. The identified barriers to the adoption of solar PV technology, which are grouped into five associated categories and their significances, are lack of access to finance (32%), non-enforcement of policy and regulation (31%), technical (18%), lack of awareness (9%) …

Cyber Security Challenges, Its Emerging Trends On Latest Information And Communication Technology And Cyber Crime In Mobile Money Transaction Services, Hakeem J. Pallangyo

Tanzania Journal of Engineering and Technology (TJET)

This paper investigates the challenges emerging trends on latest Information and Communication Technology and cybercrime in mobile money transaction services in Tanzania. The objective of this is to evaluate the challenges associated with this rapid growth in ICT and to determine factors influencing Cybersecurity readiness and Cybercrimes in mobile money transaction services. Cyber Security plays a significant role in the field of Information and Communication Technology especially on mobile money transaction services. The study recognizes the provision of mobile money services by both telecommunication companies and local banks, the fact is that whenever we think about the cyber security, the …

Effect Of Dispersions Of Al2o3 On The Physical And Mechanical Properties Of Pure Copper And Copper-Nickel Alloy, Samah El-Khatib, A. H. Elsayed, A. Y. Shash, A. El-Habak

Future Engineering Journal

This paper illustrates the mechanical and physical properties of pure Cu and Cu-Ni (50-50 wt. %) alloy mixed with Al₂O₃ (1-4 wt. %) as micro-particles reinforcement materials. The attained composite alloy specimens' characteristics were estimated such as microstructure, relative density, electrical and thermal conductivity, hardness, and compression yield stress properties to adjust the suitable optimum percentage of reinforcing material which has the best physical and mechanical properties with different main matrix materials whether pure Cu powder or Cu-Ni mechanical alloy. The micron-sized Al₂O₃ was added to enhance the mechanical and physical properties of the …

The Dark Annulus Of A Drop In A Hele-Shaw Cell Is Caused By The Refraction Of Light Through Its Meniscus, Sangjin Ryu, Haipeng Zhang, Carson Emeigh

Department of Mechanical and Materials Engineering: Faculty Publications

Knowing the meniscus shape of confined drops is important for understanding how they make first contact and then coalesce. When imaged from the top view by brightfield microscopy, a liquid drop (e.g., corn syrup) confined in a Hele-Shaw cell, surrounded by immiscible liquid (e.g., mineral oil), had a dark annulus, and the width of the annulus decreased with increasing concentration of corn syrup. Since the difference in the annulus width was presumed to be related to the meniscus shape of the drops, three-dimensional images of the drops with different concentrations were obtained using confocal fluorescence microscopy, and their cross-sectional meniscus …

Modular Cable - Driven Surgical Robots, Carl A. Nelson, Nicholas Nelson

Department of Mechanical and Materials Engineering: Faculty Publications

A surgical robot can be configured for minimally invasive surgery ( MIS ) and other types of surgery with modular link geometry and disposable components. In some examples, the surgical robot includes a cable driver comprising at least one drive motor configured for tensioning a cable. The surgical robot includes an articulated surgical tool coupled to the drive motor by the cable. The articulated surgical tool comprises at least first and second articulated links and a joint coupling the first and second articulated links. The cable passes through the joint, and the joint comprises an elastic antagonist biased in opposition …

Gross Positioning Device And Related Systems And Methods, Mark A. Reichenbach, Shane M. Farritor

Department of Mechanical and Materials Engineering: Faculty Publications

Disclosed herein are gross positioning systems for use with robotic surgical devices to provide gross positioning of the robotic surgical devices. The gross positioning systems have a base, a first arm link operably coupled to the base, a second arm link operably coupled to the first arm link, a third arm link operably coupled to the second arm link, and a slidable coupling component slidably coupled to the third arm link.

Bbt Side Mold Assy, Bill Hemphill

STEM Guitar Project’s BBT Acoustic Kit

This electronic document file set covers the design and fabrication information of the ETSU Guitar Building Project’s BBT (OM-sized) Side Mold Assy for use with the STEM Guitar Project’s standard acoustic guitar kit. The extended 'as built' data set contains an overview file and companion video, the 'parent' CADD drawing, CADD data for laser etching and cutting a drill &/or layout template, CADD drawings in AutoCAD .DWG and .DXF R12 formats of the centerline tool paths for creating the mold assembly pieces on an AXYZ CNC router, and support documentation for CAM applications including router bit specifications, feeds, speed, multi-pass …

New Advances In Fluid–Structure Interaction, Wenli Chen, Zifeng Yang, Gang Hu, Haiquan Jing, Junlei Wang

Mechanical and Materials Engineering Faculty Publications

Fluid–structure interactions (FSI) play a crucial role in the design, construction, service and maintenance of many engineering applications, e.g., aircraft, towers, pipes, offshore platforms and long-span bridges. The old Tacoma Narrows Bridge (1940) is probably one of the most infamous examples of serious accidents due to the action of FSI. Aircraft wings and wind-turbine blades can break because of FSI-induced oscillations. To alleviate or eliminate these unfavorable effects, FSI must be dealt with in ocean, coastal, offshore and marine engineering to design safe and sustainable engineering structures. In addition, the act of wind on plants and its resultant wind-induced motions …

Evaluating The Effects Of Granulated Rubber And Glass Fibers In Polymer Concrete As A Structural Material For Wafer Grinding Machines, Kevin Gabriel Kuehn, Philip Randall Streeter

Materials Engineering

Polymer concrete is a composite material used to replace cast iron and steel in wafer grinding machines for vibration damping. During the grinding and lapping processes of manufacturing silicon wafers, excessive vibrations may cause subsurface damage which requires additional polishing and reduces yield. Nine compositions containing various levels of granulated rubber and glass fibers were manufactured. CRM WRF-10 granulated rubber was examined at 0%, 5%, and 10% and Corning Cem-Fil glass fibers were added at 0%, 0.5%, and 1% by weight. Smooth-On EpoxAcast 690 epoxy resin was held constant at 16% for each composition. Crushed granite aggregate from Martin Marietta, …

Me-Em Enewsbrief, June 2022, Department Of Mechanical Engineering-Engineering Mechanics, Michigan Technological University

Department of Mechanical and Aerospace Engineering eNewsBrief

No abstract provided.

Investigation Of Topological Phonons In Acoustic Metamaterials, Wenting Cheng

Dissertations

Topological acoustics is a recent and intense area of research. It merges the knowledge of mathematical topology, condensed matter physics, and acoustics. At the same time, it has been pointed out that quasiperiodicity can greatly enhance the periodic table of topological systems. Because quasiperiodic patterns have an intrinsic global degree of freedom, which exists in the topological space called the hull of a pattern, where the shape traced in this topological space is called the phason. The hull augments the physical space, which opens a door to the physics of the integer quantum Hall effect (IQHE) in arbitrary dimensions. In …

Monolithic Integration Of Hybrid Perovskite Single Crystals With Silicon For Highly Sensitive X - Ray Detectors, Jinsong Huang, Wei Wei

Department of Mechanical and Materials Engineering: Faculty Publications

Perovskite single crystal X - ray radiation detector devices including an X - ray wavelength - responsive active layer including an organolead trihalide perovskite single crystal, a substrate layer comprising an oxide, and a binding layer disposed between the active layer and the substrate layer. The binding layer including a binding molecule having a first functional group that bonds to the organolead trihalide perovskite single crystal and a second functional bonds with the oxide. Inclusion of the binding layer advantageously reduces device noise while retaining signal intensity.