Mechanical Engineering Commons^™

The Impact Of Gender Sensitization On Requirements Elicitation: A Controlled Experiment, Ruthbertha Kateule, Salome Maro, Leonard Peter Binamungu

Tanzania Journal of Engineering and Technology (TJET)

Previous studies in software engineering have reported the importance of considering gender aspects in various software engineering activities, including requirements engineering, however, to the best of our knowledge, no work has investigated the impact of gender sensitisation on eliciting gender inclusive software requirements. The objective of this study was to understand the impact of gender sensitisation on software requirements elicitation. We conducted a controlled experiment using 40 undergraduate students from three different computing programs at the University of Dar es Salaam. The 40 participants were divided into 9 groups with both males and females. The participants were asked to elicit …

Load Flow And Fault Performance Evaluation Of Interconnected Minigrids In Uganda Using Digsilent Powerfactory, Prossy Mutesi, Santos Kihwele, Emmanuel Matee

Tanzania Journal of Engineering and Technology (TJET)

The increasing demand for decentralized, reliable electricity in rural Sub-Saharan Africa has catalyzed the deployment of minigrids as an intermediate electrification strategy. This study investigates two solar photovoltaic (PV) mini-grids: Kyamugarura and Kanyegaramire, located in western Uganda, approximately 3km apart. Each mini grid initially consisted of 13 kW installed photovoltaic (PV) capacity, supplying power to households and small businesses. Due to rising demand and regular evening blackouts, both mini-grids are being upgraded to 57 kWp each. The integration of these upgraded systems into the national utility grid is proposed and simulated to evaluate performance improvements under two medium-voltage interconnection options: …

Ion Irradiation Of Microelectromechanical Resonators, Hengky Chandrahalim, David D. Lynes

AFIT Patents

A method of enhancing an electromechanical coupling coefficient of a microelectromechanical (“MEMS”) device. The method includes applying, to a fully fabricated MEMS device, heavy particle ion radiation to the MEMS device at a fluence of at least 1×10¹⁴ cm.⁻². According to other embodiments of the present invention are directed to a bandpass filter comprising a plurality of MEMS devices fabricated in accordance with the methods provided. The MEMS of the plurality are electronically or mechanically coupled.

Load Profile Analysis And Forecasting For Rural Mini Grids In Uganda, Prossy Mutesi, Santos L. Kihwele, Emmanuel S. Matee

Tanzania Journal of Science

Accurate load forecasting is essential for the reliable and cost-effective operation of rural mini grids, where constrained generation capacity and high penetration of renewable energy resources require well-informed operational decisions. This study examines electricity demand characteristics and forecasting performance for the Buzaami and Ssenyondo mini grids in Uganda, with particular focus on diurnal load profiles, peak demand behavior, and seasonal variability. 2022 operational data show extended peak demand from early morning to late evening, driven by socio-economic activities that strain resource scheduling and reliability management. To address these challenges, the study evaluates and compares Long Short-Term Memory (LSTM) networks, fuzzy …

Rapid-Prototyping Nanofabrication: Lcd-Based Projection Lithography And Physical Vapor Deposition, Sabeel Saleem Mohammmed

University Honors Theses

The semiconductor industry's continued growth, driven in large part by demand for artificial intelligence hardware, has highlighted the need for greater workforce development in regions adjacent to major fabrication centers like Oregon's Silicon Forest. This capstone project lays the groundwork for a small scale and student led semiconductor fabrication lab at Portland State University by demonstrating two of the core steps in chip manufacturing: photolithography and thin film deposition. Rather than relying on conventional fixed reticles, this work explores a unique, low cost approach to patterning that uses an ultraviolet-compatible liquid crystal display (LCD) as a programmable reticle, allowing arbitrary …

A Comparative Study Of Model Predictive Control And The Stanley Method For Vehicle Path Tracking Applications, Noah S. Fitzgerald

Master's Theses

This thesis compares a model predictive controller (MPC) and a lateral Stanley controller for vehicle path-tracking applications under simulation-based and perception-driven operating conditions. Both controllers were evaluated in simulation using a nonlinear dynamic bicycle model executing single and double lane change maneuvers. Following simulation-based evaluation, both controllers were implemented on hardware within a perception-driven steering-control pipeline. This pipeline utilized recorded sensor data from the MXcarkit 1/8^th-scale autonomous vehicle platform, incorporating lane instance segmentation and homography-based roadway estimation.

Under idealized simulation conditions, the MPC demonstrated improved trajectory-tracking performance during aggressive maneuvers while requiring greater steering activity and computational effort …

Me3329 Modular Phonograph Gearbox, Garrett Andrik Leighton, Preston Robert Hupe, Gavin Carter Ebner, Andrew Renato Reyes

Mechanical Engineering

The Mechanical Engineering Department at California Polytechnic State University, San Luis Obispo (Cal Poly), seeks to develop a laboratory tool allowing students to reinforce concepts of gears for Mechanical Systems Design (ME329). Some current laboratories do not provide students with hands-on interaction, and the department lacks equipment and documentation to support a standardized lab. With ME329 expanding from ten to fifteen weeks, there is an opportunity to create a physical gearbox design lab allowing students to reinforce lecture material in engaging ways, while standardizing student learning. This senior project is presented and sponsored by Professor Alan Zhang. It will be …

Custom Animatronic Puppet, Jake Schuman, Fredy Herrarte, Madison Reedy, Jackson Reynolds

Mechanical Engineering

This project involved the design, fabrication, and implementation of a custom audio-animatronic puppet modeled after Dr. Brian Davis for the California Polytechnic State University Mechanical Engineering Department. The objective was to create an expressive, lifelike character capable of synchronized speech, head movement, arm gestures, and seated-to-standing motion while demonstrating the integration of mechanical design, controls, manufacturing, and artistic fabrication.

The final system consists of an 18-degree-of-freedom animatronic platform utilizing servo-driven facial and upper-body actuation combined with a pneumatic standing mechanism. A modular aluminum and 3D-printed structural framework was developed using SolidWorks and validated through engineering analysis. Character shells were digitally …

Mass - Modular Acoustic Suppression System, Julia Megargle, Michael A. Milner, Lucas Kaemmererer, Jonathan Corvera, Gabriel Choi, Emmi Cayer

Mechanical Engineering

The Modular Acoustic Suppression System (MASS) is a mass tuned damper that reverberates a membrane atop a cavity to absorb select acoustic frequencies produced by the Environmental Control and Life Support Systems (ECLSS) within NASA's Artemis Human Lander. The height of the reverberation chamber is adjusted to mitigate a range of varying tonal frequencies within the human lander.

Autonomous Vision-Based Litter Collection Rover, Dante Michael Benedetti, Benjamin Scott Tavares, Nathan Heil

Electrical Engineering

This report documents the design, implementation, and testing of an autonomous litter-collection rover developed as a Senior Project Design Lab (EE 460/463/464) at California Polytechnic State University. The rover integrates autonomy, computer vision, embedded real-time control, mecanum-wheel omnidirectional mobility, and a two-degree-of-freedom robotic arm to detect, approach, and collect small ground-level litter such as bottles, wrappers, and paper fragments.

The system uses a two-layer compute architecture: an NVIDIA Jetson Orin Nano running ROS 2 for perception, SLAM, and path planning, paired with an STM32L4A6ZG microcontroller for real-time motor control and odometry. The robot is built on a multi-level aluminum frame …

Evaluation Of The Effect Of Vibration On Signal Reflection In Coaxial Cable Connectors For Vibration Sensing In Aircraft Structures And Systems, Saidanvar Esanjonovich Valiev, Anthony C. Okafor, Jeremiah J. Rittenhouse, Daniel S. Stutts, Jie Huang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper investigates the effects of vibration on signal reflection (S11) in aerospace data transmission line (ADTL) and commercial data transmission line (DTL) connectors for their alternative use as vibration sensors. The impact of vibration on the S11 signal was investigated on five ADTL and four DTL connectors at six vibration frequencies (20 Hz, 40 Hz, 80 Hz, 160 Hz, 320 Hz, and 640 Hz) and four vibration accelerations (0.5G, 1 G, 2 G, and 4G). The experiment was conducted using a split-plot design with a cable type assigned as the main-plot factor, with vibration frequency and acceleration as subplot …

Design And Parametric Study Of A Mems-Based Reservoir Computer For Reinforcement Learning, Andrew P. Carr

Master's Theses

Single-node reservoir computing (RC) is a hardware-efficient approach to machine learning, leveraging the dynamics of physical systems. In this work, two reinforcement learning algorithms, Q-learning and Proximal Policy Optimization (PPO), are applied to a simulated micro-electro-mechanical system (MEMS)-based reservoir computer to solve both discrete and continuous control tasks. MEMS-based reservoirs are low-power, compact, and their natural frequencies (kHz to MHz) pair well with real-time control loops. To explore the relationship between reservoir dynamics and learning performance, a parametric study is conducted on two reservoir hyperparameters, reservoir size and neuron separation, using CartPole-v1 and MountainCar-v0. The RC successfully learns multiple tasks …

Safe Control Design For Quadruped Locomotion In Unstructured Environments Using Linear Transfer Operators, Sriram Sundar Krishnamoorthy Shankara Narayanan

All Dissertations

Deploying quadruped robots in unstructured, obstacle-rich environments requires control and planning methods that remain safe and reliable despite complex terrain geometry, limited sensing, and inevitable modeling errors. This thesis develops operator-theoretic tools for safe control design of robotic systems using linear transfer operators, with a focus on quadruped locomotion in unstructured environments. The central goal is to develop a unified operator-theoretic framework for safe control design based on the Perron–Frobenius (P–F) and Koopman operators. In particular, the thesis leverages \emph{density functions} to develop safe navigation frameworks in the dual space of densities. In the operator-theoretic perspective, the P–F operator governs …

Versatile Exoskeleton Control Paradigms For Agile Human Locomotion: Task-Agnostic And Stability-Augmented Assistance, Miao Yu

All Dissertations

Lower-limb exoskeletons have shown great potential for assisting human locomotion, but designing controllers that provide assistance across diverse locomotor tasks and under external perturbations remains a major challenge. Many existing controllers for steady-state walking rely on pre-defined reference trajectories, which constrain voluntary human motion and limit adaptability across tasks. Moreover, they usually assume stable walking, while their performance under unstable conditions remains largely unexplored. In addition, existing gait stability augmentation controllers are often reactive rather than proactive to unstable conditions. In this dissertation, we propose control frameworks that preserve voluntary human motion while addressing two major challenges: providing task-agnostic assistance …

Development Of Low-Cost Triaxial Force Sensor For Measurement Of Human-Exoskeleton Interaction Forces, Hamdan Khan Sarvathullah

All Theses

Contemporary research suggests that shear force is a major contributor to discomfort and pressure injury. However, the variation of shear forces during human-exoskeleton interaction dynamics is a highly unexplored field. The high cost of commercial triaxial force sensors may be a major factor in the notable lack of research in this field. Therefore, in this paper, we present a low-cost, 3D-printed triaxial force sensor designed specifically to measure the triaxial interaction forces between an exoskeleton and its user. The triaxial force sensor uses Carbon-Black/Silicone Rubber (CB/SR) strings to measure shear forces, whereas the normal force is measured with a Force …

The Pid-Based Three Quadcopter Uavs Formation Control Under External Disturbance, Vo Van An, Trinh Luong Mien

Makara Journal of Technology

This paper presents the design and evaluation of a formation control strategy for three quadcopter UAVs, based on a PID controller in a leader–follower structure, under the influence of external disturbances. Each UAV employs a six-degree of-freedom dynamic model and utilises a cascade PID control architecture, in which the inner control loop stabilises the attitude. In contrast, the outer control loop regulates position and maintains the formation. The PID parameters are tuned using the Ziegler–Nichols method to ensure simple implementation and low computational cost. The performance of the control system is evaluated through simulations in the MATLAB environment for two …

Techno-Economic Analysis Of Hybrid Systems As A Solution For Electricity Supply During The Dry Season At The Bakaru Run-Of-River Hydropower Plant, Zamharir Aditya Febri, Mohammad Akita Indianto, Sheila Tobing

Journal of Materials Exploration and Findings

Within the South Sulawesi power system (Sulbagsel), the Bakaru Hydro Power Plant serves as a key facility expected to provide consistent and reliable electricity supply. However, since the Bakaru plant operates under a Run of River scheme, its energy output is highly dependent on river discharge rates. In 2024, a significant decrease in water flow was recorded between August and October, which led to a drastic reduction in power generation. To address this challenge, a hybrid energy system is proposed to ensure continuous load coverage, particularly during the dry season. The optimal configuration of this hybrid system was modeled and …

Leveraging Convolutional Neural Networks For Through-The-Wall Radar Imaging: Challenges, Impacts, And Future Directions, Tumaini Edgar, Abdulla F. Ally, Abdi T. Abdalla

Tanzania Journal of Engineering and Technology (TJET)

Through-the-wall radar imaging (TWRI) is an essential technology for military and rescue applications; however, its performance in detecting and visualizing high-quality images of targets behind walls is significantly degraded by multipath reflections and signal attenuation. This paper reviews the current state of TWRI and its challenges, and explores the transformative potential of deep learning, particularly convolutional neural networks (CNNs), in addressing these challenges. Peer-reviewed articles published from 2018 to 2024 were analysed to examine CNN applications in addressing TWRI challenges. The analysis reveals that using CNNs, TWRI systems can be more effective by filtering wall distortions, reducing noise, lowering computational …

Engineering Problem Solving In First Robotics Competition, Jingyuan Fu

SACAD: Scholarly Activities

FIRST Robotics Competition is a program in which high school students design, build, and program robots for a new engineering challenge each year. Within that environment, robot development requires more than mechanical construction alone, since successful performance depends on strategy, subsystem integration, software development, and continuous iteration. This poster examines how game analysis shaped the robot’s overall development, including design priorities, system layout, material choices, and coding decisions. It also highlights how programming and tuning were used to improve subsystem performance and increase effectiveness in competition. This project demonstrates how the FIRST Robotics Competition can serve as a practical setting …

Implantable, Sensor-Embedded Vascular Graft Towards Wireless Monitoring Of Stenosis, Nnamdi Dike

LSU Master's Theses

Arteriovenous (AV) grafts are commonly used to provide vascular access for hemodialysis in patients with end-stage renal disease. Despite their widespread use, AV grafts are prone to complications such as stenosis and thrombosis. Early detection of these conditions remains challenging with current monitoring methods too costly or insufficient. This work presents the design, fabrication, and validation of an LC pressure sensor embedded within a model AV graft to enable real-time monitoring. The proposed system integrates a parallel-plate capacitive pressure sensor with a spiral inductor to form an LC circuit embedded within an elastomeric graft wall. The Ecoflex 00-30 dielectric layer …

Mathematical Modelling And Optimisation Of The Reactor For The Esterification Process Of Safflower Oil With N-Butyl Alcohol, Sadritdin Makhamatdinovich Turabdjanov Academician, Hasan Sadriddin Ugli Fozilov, Ozoda Bakhronovna Axmedova, Sadriddin Fayzullayevich Fozilov

Technical science and innovation

This study addresses the mathematical modelling and optimisation of a reactor for the esterification of safflower oil with n-butyl alcohol. To improve process controllability and reduce the need for numerous pilot-scale trials, an ideal-mixing continuous stirred-tank reactor (CSTR) model was adopted. Incorporating reaction kinetics, the effect of contact time on the relative viscosity of the product mixture was analysed. The modelling results indicate that achieving an acceptable degree of feedstock conversion is difficult when a single ideal-mixing reactor is used. Therefore, a CSTR cascade was proposed, and the configuration with N = 2 reactors was selected as the most appropriate …

Theoretical And Practical Foundations Of Healthcare System Digitalization, Sanjarbek Bekturdiev Sharifboyevich Phd, Muxlisa G‘Ulom Qizi G‘Ofurova

Technical science and innovation

The digital transformation of healthcare represents a key direction in improving the accessibility, quality, and efficiency of medical services. This study examines the main components of eHealth, including telemedicine, electronic health records, cloud technologies, and mobile applications, as well as the role of international organizations in promoting national digital health strategies. Particular attention is given to the current state of digital healthcare in the Republic of Uzbekistan, where significant progress has been made in developing infrastructure and implementing information systems, although challenges related to integration, standardization, and regulatory support remain. The work identifies the main trends in the development of …

Adaptive Multi-Stage Fuzzy Logic Approach With Dynamic Weight Adjustment For Robust Power Transformer Diagnostics, Dilafruz Rustamovna Abdullabekova, Odiljon Muhammadjonovich Kutbidinov

Technical science and innovation

An adaptive multi-level fuzzy logic framework with dynamic weight adjustment for power transformer fault diagnosis and health index assessment was proposed in this study. A comprehensive analysis of existing transformer diagnostic approaches was performed, and their limitations related to static weighting schemes and uncertainty handling were identified. A hierarchical fuzzy inference structure was introduced, integrating multi-source diagnostic data, including dissolved gas analysis, transformer oil quality indicators, thermal parameters, and electrical measurements. At the first level, individual fuzzy subsystems were developed to evaluate partial condition indices associated with insulation degradation, oil aging, and thermal–electrical stress. At the second level, a global …

Development Of New Methods For Calculating Pressure And Energy Losses For Pumping Station Water Intakes, Faxriddin Jaylovovich Nosirov, Oleg Yakovlevich Glovatsky, Jurabek Abdyrahmon O'G'Li Urolov, Abduqodirkhon Samatkhonovich Abdullakhaev, Anvar Mamur Ugli Uzokov

Technical science and innovation

The aim of this study is to improve the efficiency of water resource management methods. Improvements to the water intake of the Karshi Main Canal are considered using calculations of pressure losses at the entry and exit of liquid into the flow, which differ from pressure losses in a stationary medium. The article considers some of the methods for using renewable energy sources, where the change in gravitational potential energy does not depend on the way of using energy and the operating scheme is a gravitational energy pump. The implementation of control and monitoring systems is necessary to ensure optimal …

Refinement Of Wind Speed Estimation At Turbine Hub Height Using Satellite Data And Regression Analysis Under Complex Terrain Conditions, Isroil Abriyevich Yuldoshev, Tulqin Rustamovich Jamolov, Sa'dullo Sayfiddin Ugli Fazliddinov, Jumanazar Farhodjon OʻGʻL Abdurashidov

Technical science and innovation

Reliable assessment of wind energy potential in regions characterized by complex terrain is often constrained by the limited availability of ground-based meteorological measurements. This study proposes an improved regression-based approach for refining wind speed estimates at the wind turbine hub height of 65 m using satellite-derived data from the NASA POWER database combined with a logarithmic vertical wind profile. The proposed methodology is validated using real operational data from a 750 kW wind power plant located in the mountainous Bostanlyk district of Uzbekistan for the period 2018–2021. The regression analysis demonstrates a strong linear relationship between the extrapolated wind speed …

Preliminary Study Of Circular Lithium-Ion Battery Thermal Management System With Intermittent Cooling, Muhammad Luthfi, Leo Van Gunawan, Yudhy Kurniawan, Sabda Ikhwal Rahmatullah, Alfarikh Muhammad Daen

Journal of Mechanical Engineering Science and Technology (JMEST)

The active battery thermal management system is important to maintain the lithium-ion battery temperature within the optimum and safe range. However, current research has not considered the potential for excessive energy consumption due to the continuous operation of a fluid flow source, such as a fan. This research aims to investigate the effect of a novel approach called intermittent cooling on the cooling efficacy and energy consumption of the circular-configuration BTMS. Both transient computational fluid dynamic simulation and experiment were conducted in this work with 30 pieces of 18650 Lithium-Ion batteries positioned in a staggered circular configuration. From the result, …

A Platform For Acquiring And Classifying Low-Noise Electrocardiogram Signals For Applications In Cardiovascular Monitoring, Begmamat Berdimurodovich Dushanov, Narzullo Mamatov Dr.

Technical science and innovation

The early screening and continuous monitoring of cardiovascular diseases need effective acquisition and smart processing of electrocardiogram (ECG) signals. In this article, we introduce a compact platform designed for the acquisition of low-noise ECG signals and classification of the signals using a one-dimensional convolutional neural network (1D-CNN). Our compact platform consists of a low-noise analog front-end (AFE), including an instrumentation amplifier and a chain of analog filters, along with a data acquisition component designed to ensure effective suppression of baseline wander and high frequencies. Our compact platform consumes a low amount of power and can therefore be used for continuous …

Tuning And Performance Of Pid Controlled Low Complexity Systems, Timothy Evans

Honors Theses

Proportional integral derivative (PID) controllers are used for precise position and orientation control in systems such as autonomous underwater vehicles (AUVs). This project supports the University of Southern Mississippi’s (USM) Robotics Club’s RoboSub AUV effort by developing, troubleshooting, and manually tuning PID controllers to characterize tracking performance and settling time across systems of increasing complexity. Initially, the project hypothesized that tracking performance would be reduced and settling times would increase as system complexity advanced from one degree-of-freedom (DOF) to two DOF. However, prior research was found that suggests that for small disturbances around an equilibrium state, separate PID-controlled DOFs can …

Evaluating Uav Visual-Inertial Odometry Trajectory Error And Feature-Level Metrics Over Repetitive Floor Patterns, Anass El Mekkoussi

Doctoral Dissertations and Master's Theses

Visual-Inertial Odometry (VIO) is a widely used state estimation technique for Uncrewed Aerial Vehicle (UAV) navigation in environments where Global Navigation Satellite System (GNSS) signals are unavailable. VIO systems that rely on visual feature tracking are susceptible to performance degradation when operating over surfaces containing repetitive visual textures, where visually similar features can produce ambiguous correspondences that introduce errors into the trajectory estimate. Despite the prevalence of repetitive textures in indoor UAV operating environments such as warehouses, manufacturing facilities, and infrastructure corridors, the specific impact of different repetitive pattern geometries on per-surface VIO accuracy has received limited systematic study, and …

Ellie - Exteroceptive Light Locomotion In Eukaryote-Fungi, Brandon Etwarroo

Doctoral Dissertations and Master's Theses

Over the past decade, fungal research and its technological applications have expanded across multiple disciplines, including the emerging field of biohybrid systems. This thesis develops and evaluates a wireless, untethered mobile robot controlled by the action potential-like activity generated by Pleurotus ostreatus sporocarps under red, green, and blue optical stimulation. Light is applied to the sporocarps, the resulting electrical responses are recorded, and these signals are transmitted wirelessly to actuate the mobile robot. Both the action potential-like activity patterns and the robot’s movement trajectories were analyzed. The results demonstrate that wireless robotic control mediated by fungal electrophysiology is feasible. Overall, …