Mechanical Engineering Commons^™

Design Of A Launchable Remote-Controlled Rover And Protective Aeroshell, Matthew Loewer, Colby Weeks, Lake Williams, Jackson Zazzaro

Senior Theses

Planetary rovers, vehicles that can traverse challenging terrain, have excelled in their exploration missions to other celestial bodies. They have been especially suitable for exploring Mars, as rovers such as Opportunity and Perseverance have collected valuable geological, atmospheric, seismic, and magnetic information from the Martian surface. Rovers will remain vital in future space exploration missions, and it is necessary to understand their design and functionality. This paper focuses on the design and prototyping of a miniature rover that can survive the rough Martian terrain while collecting and submitting environmental data for scientific analysis. The design is based off proven Martian …

Comparison Of Conventional And Adaptive Acoustic Beamforming Algorithms Using A Tetrahedral Microphone Array In Noisy Environments, Megan Brittany Ewers

Dissertations and Theses

In situ acoustic measurements are often plagued by interfering sound sources that occur within the measurement environment. Both adaptive and conventional beamforming algorithms, when applied to the outputs of a microphone array arranged in a tetrahedral geometry, are able to capture sound sources in desired directions and reject sound from unwanted directions. Adaptive algorithms may be able to measure a desired sound source with greater spatial precision, but require more calculations and, therefore, computational power. A conventional frequency-domain phase-shift algorithm and a modified adaptive frequency-domain Minimum Variance Distortionless Response (MVDR) algorithm were applied to simulated and recorded signals from a …

Quantum-Powered Battery Scheduling In Modern Distribution Grids, Diba Ehsani

Electronic Theses and Dissertations

The rising need for exploiting a novel and evolved computation is an increasing concern in the power distribution system to address the exponential growth of distribution-connected devices. Scheduling numerous battery energy storage systems in an optimal way is one of the emerging challenges that will be more noticeable as the number of batteries, including residential, community, and vehicle batteries, increases in the grid. This thesis focuses on this topic and offers a necessary component in building the quantum-compatible distribution system of the future. Using a constrained quadratic model (CQM) on D-Wave’s hybrid solver as well as a binary quadratic model …

Steminism: Analyzing Factors That Improve Retention Of Women In Stem, Kira Carter, Jane Kelley, Jason Vasser-Elong, Rc Patterson

Dissertations

Our co-authored research ‘Steminism: Analyzing Factors That Improve Retention for Women as STEM Majors’ analyzed factors that contributed to the retention of women in science, technology, engineering, and mathematics (STEM) programs at Missouri University of Science & Technology (Missouri S&T). Women make up half of the US population, and while careers in (STEM) are an integral part of the US economy, women are underrepresented in these career fields. The purpose of our dissertation is to address the underrepresentation of women in STEM majors. Our methodology included homogeneous sampling to collect qualitative data. More specifically, we consulted with academic advisors and …

Development Of An Electromagnetic System For Wireless Magnetic Manipulation Of Soft Capsule Endoscope For Drug Delivery Applications, Nada Ashraf Hussein Mahmoud

Theses and Dissertations

Wireless capsule endoscopy (WCE) is a remarkable diagnostic device that examines the gastrointestinal (GI) tract. The WCE is a small capsule integrated with a camera that is used to visualize the inner mucosa of the GI tract. WCE has been proven to be the most effective method to diagnose GI diseases and GI cancers. The procedure reduces the discomfort and risk compared to conventional endoscopy methods. However, current WCEs lack the ability to take a biopsy or deliver a drug to a specific location. Those therapeutic functions can be introduced by wirelessly controlled WCEs. This thesis introduces an electromagnetic system …

Research On An Improved Cotton Cleaner Unit, Muzaffar Djurayev, Sherqul Hakimov, Ilhom Abbazov, Rashid Kaldybaev

Technical science and innovation

This article analyzes the results of changes to the working parts of a cotton cleaning unit from small and large impurities. It is known that the UXK installation uses continuous cleaning technology, that is, the cotton entering the purifier is cleaned in all its cleaning sections and then transferred to another process. In these sections, pieces of cotton wool from the separated waste are regenerated in a separate drum. Existing purifier suppliers use a manually operated mechanical system to monitor its performance. These factors do not make it possible to control the cleaning process when the quality indicators of cotton …

Improvement Of Convective Drying Equipment, A Ponasenko, Jasur Safarov, Shaxnoza Sultanova

Technical science and innovation

Drying of agricultural raw materials is an energy-consuming but integral process. Therefore, increasing the efficiency of drying and improving the quality indicators of dried material at minimum material and energy costs is relevant for producers of agricultural products. By present time numerous researches on improvement of constructions and processes of work of dryers providing satisfactory parameters of energy saving have been carried out. In some scientific materials it is shown that the use of generative gas and straw as fuel allows to reduce energy costs for the drying process in the fluidised bed dryer by 10-30%, the quality of seeds …

Existing Methods For Monitoring Power Autotransformers, Nurali Berdiyorovich Pyrmatov, Dilafruz Rustamjon Qizi Abdullabekova

Technical science and innovation

autotransformers, methods, diagnostics, efficiency, monitoring.Particular attention is given to analyzing the gas composition of transformer oil, which is a sensitive indicator of various defects such as thermal breakdown and heating. In addition, methods based on the measurement of external magnetic field strength are discussed. This technique provides a unique opportunity to detect magnetic anomalies associated with possible defects in the structural components of the transformer. The article emphasizes that successful monitoring requires an integrated approach, combining different techniques. The authors analyze the advantages and limitations of each method and offer practical recommendations for integrating these methods into maintenance systems. In …

Mathematical Modeling Of Fruit Drying And System Analysis Of The Process (On The Example Of Persimmon), Gani Dadayev, Jasur Safarov, Shakhnoza Sultanova, Qobiljon Muxiddinov

Technical science and innovation

Vegetable raw materials, as an object of drying, are characterized by a large amount of water and a low content of dry substances. Vegetable raw materials have a capillary-porous structure. Food products contain both bound and free moisture at the same time. The removal of moisture from the material during drying depends on the total moisture content and the form of connection of moisture with the material. Adsorption and osmotic - bound moisture is retained at the interface of colloidal particles with the environment. Food products contain both bound and free moisture at the same time. The quantitative ratio between …

Capacitive Electrode Based Moisture Measurement Converter Errors And How To Eliminate Them, Hamdam Jabborov, Temurbek Rashidov

Technical science and innovation

The article discusses the errors associated with the moisture measuring transducer that is based on the cylindrical electrode, along with their sources and calculation formulas for error elimination. The initial capacitance of the capacitive electrode humidity converter is dependent on its geometric parameters, such as the radii of the electrodes and their length. Accurate calculation of these geometric parameters enables the reduction of regular measurement errors in the input and switching circuit of the moisture converter to a minimum value, resulting in a significant increase in the informativeness and accuracy of the output signal. Consequently, some sources of measurement errors …

Influence Of Foil Stamping Parameters On Image Quality, Khalima Abishevna Babakhanova, Mukhlisa Ergashevna Khasanova, Aziz Azimjonovich Soadatov, Nigora Junaydullaevna Sadriddinova

Technical science and innovation

The paper evaluates the influence of technological process parameters, namely die temperature and pressure force, on the quality of foil stamping, which is one of the types of finishing having a wide range of applications due to giving unique decorative and protective elements to printed products. When evaluating the influence of process parameters on the linearity and coverability of the image, it was found that the pressure force has less influence on the result than the temperature. According to the data of the study, it can be concluded that the maximum percentage of completeness of covering is achieved at a …

Nonlinear Guidance And Control Of Unmanned Aerial Manipulators For Delivering A Payload On A Moving Platform, Ravi Gyawali

Mechanical and Aerospace Engineering Theses - Archive

Unmanned Aerial manipulators (UAMs) are a class of Unmanned Aerial Vehicles (UAVs) equipped with a manipulator. By combining the aerial mobility of a UAV with a manipulator's dexterity, these hybrid systems can perform a wide range of complex tasks while reducing risks and costs. As a result, they are increasingly being utilized for military, industrial, and agricultural applications.

The thesis presents a novel approach for a multi-UAM system to collaboratively deliver a payload on a stationary or maneuvering platform. A sliding-mode-based guidance law, sourced from existing literature, is integrated with a combined control technique for the UAVs and their respective …

Electophorectic Deposition For Novel Nanodecorated Electrodes Towards Thermally Charging Supercapacitor (Tcsc), Ashish Thakur

Mechanical and Aerospace Engineering Theses - Archive

Thermally Self-Charging Supercapacitors (TSCS) are a promising new technology that can harvest waste heat to produce electrical energy. The Soret effect is exploited wherein ion separation due a temperature gradient leads to a potential difference. Here, we use electrophoretic deposition (EPD), a room-temperature, scalable, universal technique, to obtain CNT decorated electrodes for fabrication of such TSCS devices with ionic liquid electrolyte. We further show that precise control over deposition parameters can be used for optimization of TSCS performance metrics. TSCS devices were tested by several characterization standards, indicating the superior performance of nanodecorated electrodes obtained by EPD.

Dueling Robot, Abigail Coy

All Undergraduate Projects

This project was undertaken as a personal challenge to combine a Mechanical Engineering Technology degree and an Electrical Engineering Technology degree into a single final project showing the cumulative knowledge gained. It was determined that a robot to participate in Western Allied Robotics would be designed and manufactured for the 3 lb. weight class.

A two-part power system was designed to provide more power to the weapon arm. This design combined a compressive spring’s kinetic energy with the torque from the electric motor. Research determined all of the purchased components required and analysis were performed to determine the geometry and …

Development And Application Of Guided Mode Resonance Biosensor Platforms For Highly Sensitive And Real-Time Cell Killing Assays, Seyedmohsen Vaziri

Electrical Engineering Dissertations - Archive

In this work, we developed and investigated the cancer cell killing efficacy of different instances using real-time high-sensitivity measurements facilitated by Guided-Mode Resonance (GMR) sensors. The GMR biosensor technology detects shifts in the spectral peak caused by changes in the refractive index of the surrounding medium, offering a label-free method for monitoring cellular events.

A549 cell line wild type and HER2 knockout (lung cancer cells) were exposed to different concentrations of Triton X-100 and ADC (Herceptin with αHFc-CL-DMDM). The GMR-based cell killing assay demonstrated exceptional sensitivity and specificity, with shifts in wavelength exhibiting a robust correlation with cell viability and …

Impact Of Aging On Pim And Dc Resistance Of Fabric-Over-Foam Metallic Contacts, Kalkidan W. Anjajo, Seunghun Ryu, Shengxuan Xia, Gracie Boyer, Yuchu He, Haicheng Zhou, Hanfeng Wang, Jonghyun Park, Chulsoon Hwang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In this paper the impact of aging on the level of passive intermodulation (PIM) and DC resistance of fabric-over-foam metallic contacts is presented. These contacts are widely used to maintain metallic connections between modules and chassis in electronic devices. The PIM caused by the loose metallic contact of these materials mainly affects a receiver's RF sensitivity in mobile devices. This aging test under elevated temperature and relative humidity conditions offers an experiment-based approach with respect to various metallic contact cases. Energy dispersive spectroscopy and scanning electron microscopy are used to characterize the change in material composition and the contact surface …

Fabrication Of Smooth Sac305 Thin Film Via Magnetron Sputtering, M. Ojha, A. A. Elmustafa

Mechanical & Aerospace Engineering Faculty Publications

SAC305 (96.5 wt% Sn, 3 wt% Ag, 0.5 wt%Cu) solder is increasingly becoming popular due to its reliability good characteristics and performance in addition to the environmental concerns and regulations that restrict the use of lead in nano/microelectronic products. In nano/microelectronics, manufacturing smooth solder coatings free of defects such as voids and cracks, which can compromise joint reliability is crucial. Magnetron sputtering offers a high degree of control over film thickness and composition, resulting in films with excellent uniformity and adhesion. Despite these advantages, fabricating continuous and robust SAC305 films using magnetron sputtering remains a difficult task with limited research …

A Comprehensive Review Of Piezoelectric Ultrasonic Motors: Classifications, Characterization, Fabrication, Applications, And Future Challenges, Sidra Naz, Tian-Bing Xu

Mechanical & Aerospace Engineering Faculty Publications

Piezoelectric ultrasonic motors (USMs) are actuators that use ultrasonic frequency piezoelectric vibration-generated waves to transform electrical energy into rotary or translating motion. USMs receive more attention because they offer distinct qualities over traditional magnet-coil-based motors, such as miniaturization, great accuracy, speed, non-magnetic nature, silent operation, straightforward construction, broad temperature operations, and adaptability. This review study focuses on the principle of USMs and their classifications, characterization, fabrication methods, applications, and future challenges. Firstly, the classifications of USMs, especially, standing-wave, traveling-wave, hybrid-mode, and multi-degree-of-freedom USMs, are summarized, and their respective functioning principles are explained. Secondly, finite element modeling analysis for design and …

External Direct Sum Invariant Subspace And Decomposition Of Coupled Differential-Difference Equations, Keqin Gu, Huan Phan-Van

SIUE Faculty Research, Scholarship, and Creative Activity

This article discusses the invariant subspaces that are restricted to be external direct sums. Some existence conditions are presented that facilitate finding such invariant subspaces. This problem is related to the decomposition of coupled differential-difference equations, leading to the possibility of lowering the dimensions of coupled differential-difference equations. As has been well documented, lowering the dimension of coupled differential-difference equations can drastically reduce the computational time needed in stability analysis when a complete quadratic Lyapunov-Krasovskii functional is used. Most known ad hoc methods of reducing the order are special cases of this formulation.

Structured Invariant Subspace And Decomposition Of Systems With Time Delays And Uncertainties, Huan Phan-Van, Keqin Gu

SIUE Faculty Research, Scholarship, and Creative Activity

This article discusses invariant subspaces of a matrix with a given partition structure. The existence of a nontrivial structured invariant subspace is equivalent to the possibility of decomposing the associated system with multiple feedback blocks such that the feedback operators are subject to a given constraint. The formulation is especially useful in the stability analysis of time-delay systems using the Lyapunov-Krasovskii functional approach where computational efficiency is essential in order to achieve accuracy for large scale systems. The set of all structured invariant subspaces are obtained (thus all possible decompositions are obtained as a result) for the coupled differential-difference equations …

A Novel Computational Analysis Of Boundary-Driven Two-Dimensional Heat Flow With Internal Heat Generation, Muhammad Abid, Madiha Bibi, Nasir Yasin, Muhammad Shahid

Mathematics & Statistics Faculty Publications

Accurate numerical solution of parabolic and elliptic partial differential equations governing two-dimensional heat transfer is critical for engineering simulations but computationally challenging. This work employs key numerical techniques finite differences, conjugate gradients, and Crank-Nicolson time stepping to solve the heat diffusion equation and analyze method performance. The Poisson equation is discretized using second-order central finite differences and solved with the conjugate gradient approach to determine the steady state solution. The transient heat equation is integrated in time via the Crank-Nicolson implicit scheme, also utilizing conjugate gradients. The methods effectively compute solutions matching analytical and boundary conditions. Convergence and stability are …

Artificial Intelligence Enabled Machinery Fault Detection And Diagnosis Using Vibro-Acoustic Signals, Srinivasa Rao Ippili

Theses and Dissertations--Mechanical and Aerospace Engineering

In various industries, the early detection of faults in rotating machinery is crucial to prevent system failures and ensure customer satisfaction. Typically, vibration measurement and diagnosis are employed for fault detection, but this process faces challenges in automation due to the complexity of installing and maintaining accelerometers, particularly in end-of-line quality control or pre-installed machinery health assessments. Acoustic signals, as a form of mechanical wave, offer an alternative for monitoring machinery while in operation. Unlike accelerometers, acoustic transducers are non-contact and easy to set up, enabling real-time data collection without interrupting equipment operation. However, utilizing acoustic signals in manufacturing poses …

Provably Safe Control For Input-Constrained Robotic Systems, Pedram Rabiee

Theses and Dissertations--Mechanical and Aerospace Engineering

This dissertation addresses challenges in control design for safety-critical robotic systems with input constraints. It focuses on developing novel control barrier function (CBF) approaches to ensure safety while optimizing performance. The work is motivated by the limitations of traditional methods in handling nonlinear systems with multiple constraints and actuator limits.

Three main contributions are presented. First, a soft-minimum barrier function is introduced, utilizing finite-time horizon predictions to create control forward invariant subsets of the safe set while respecting actuator constraints. This method is extended to multiple backup controls, which can enlarge the safe operating region.

Second, a technique for composing …

On Uncertainty For Ill-Posed Robot Decision Problems, Jared Joseph Beard

Graduate Theses, Dissertations, and Problem Reports (ETD)

As robots adopt more real world responsibilities, they will be expected to solve more complicated problems. In some cases limited prior knowledge will result in unmodelled environmental conditions; in others, multiple users may have competing perspectives on how to frame a decision problem. Many existing frameworks, namely Markov decision processes (MDP) presuppose users have identified a specific problem with models sufficient to solve or learn a problem. If we wish to extend MDPs to novel problems or those heavily dependent on user feedback, autonomous decision makers must be able to identify limitations in how a given problem is framed and …

Pulse-Width Modulation Spray System Performance And Development Of A Novel System To Optimize Spray Use Efficacy, Prashanta Pokharel

Theses and Dissertations--Biosystems and Agricultural Engineering

The overarching objective of this research was to enhance our understanding of pulse width modulation (PWM) based nozzle control system and develop an intelligent nozzle control system for agricultural spray applications. This dissertation focused on measuring and analyzing the transient nozzle pressure characteristics and performance under PWM control. Additionally, it explored the development of an innovative multi-degree-of-freedom (DOF) nozzle control system for precise chemical applications in specialty crop systems.

The pressure dynamics of a PWM system were studied by developing an instrumentation system capable of operating a solenoid valve and recording pressure signals. A nozzle body and two manifolds of …

Enhancing Robotic Exploration Through Semantically-Guided Sampling Strategies, Christopher Alexander Arend Tatsch

Graduate Theses, Dissertations, and Problem Reports (ETD)

From space and deep-sea exploration to disaster response and environmental monitoring, autonomous robots are essential for advancing science, improving safety, and addressing critical challenges. This dissertation introduces a novel open-source strategy for autonomous robotic exploration: the Semantically-Guided Exploration (SGE) framework. Designed for ground vehicles, SGE integrates semantic understanding into the autonomous exploration process, improving decision-making in complex environments. Specifically, the proposed sampling-based approach uses the information from the semantic segmentation of RGB images and depth images to guide the robot's selection of exploration goals. This method enables the robot to steer away from potential dangers such as large rocks and …

Observability-Aware Path Planning For Autonomous Navigation, Raymond Brink Neistat

Open Access Master's Theses

Terrain-Aided Navigation (TAN) is a popular method of localization for GPS-denied vehicles, particularly in the marine domain. There are many ways to perform TAN in a marine setting, such as Bathymetric SLAM (BSLAM) and Bayesian Filtering with the aid of an a priori map. These techniques have been studied extensively, but show an overall lack of rigorous observability analyses. Without nonlinear observability analyses, TAN practitioners do not have an analytical indicator to know which areas of terrain will provide opportunities for the best localization performance. This thesis reviews current developments in the endeavors of nonlinear observability analyses as well as …

Schaeffler Icvd Coating Machine, Louis Mcgrath

Williams Honors College, Honors Research Projects

Chemical Vapor Deposition (CVD) is mutual technology used to deposit thin film through a gaseous phase by vaporizing the solid materials. This conventional process usually requires high thermal stability of the materials, which is not applicable for most of the polymeric materials. Therefore, a novel process, initiated Chemical Vapor Deposition (iCVD) is developed by introducing the gaseous monument and initiator to form the thin film in-situ. By adjusting the free-radical polymerization in the vapor phase, a variety of thin and uniform polymer films can be achieved. Depending on the chemistry, iCVD has many categories. This report explains the design …

Extending Trailer, Alex Grove

Williams Honors College, Honors Research Projects

The goal of this research project is to revolutionize the convenience in towable transportation. This innovative design aims to enhance the versatility of pull-behind trailers by incorporating an extendable feature, allowing users to effortlessly adjust the length according to their specific needs. Whether navigating tight spaces or accommodating extra cargo, our trailer adapts to diverse situations, providing unmatched flexibility. In addition to its adjustable length, the trailer is engineered to be compactable, addressing the storage constraints often faced by users with limited space. The collapsible design ensures easy storage without compromising on functionality, making it an ideal solution for individuals …

Data Driven And Machine Learning Based Modeling And Predictive Control Of Combustion At Reactivity Controlled Compression Ignition Engines, Behrouz Khoshbakht Irdmousa

Dissertations, Master's Theses and Master's Reports

Reactivity Controlled Compression Ignition (RCCI) engines operates has capacity to provide higher thermal efficiency, lower particular matter (PM), and lower oxides of nitrogen (NOx) emissions compared to conventional diesel combustion (CDC) operation. Achieving these benefits is difficult since real-time optimal control of RCCI engines is challenging during transient operation. To overcome these challenges, data-driven machine learning based control-oriented models are developed in this study. These models are developed based on Linear Parameter-Varying (LPV) modeling approach and input-output based Kernelized Canonical Correlation Analysis (KCCA) approach. The developed dynamic models are used to predict combustion timing (CA50), indicated mean effective pressure (IMEP), …