Mechanical Engineering Commons^™

Investigation Of Ship Hull Girder Strength With Grounding Damage, Muhammad Zubair Muis Alie, Ristiyanto Adiputra

Makara Journal of Technology

The objective of the present study is to investigate ship hull girder strength as a result of grounding damage upon longitudinal bending. A bulk carrier and tanker are analyzed and Smith’s Method is adopted and implemented in the analysis program. An efficient solution procedure is performed by assuming the cross-section remains plane and the vertical bending moment is applied to the cross section. As a fundamental case, the damage is simply created by removing the elements from the cross section. Welding residual stress, initial imperfections, and crack extensions are not considered. The grounding damage is made by two conditions, namely …

Micro-Manipulation Using Learned Model, Matthew A. Lyng, Benjamin V. Johnson, David J. Cappelleri

The Summer Undergraduate Research Fellowship (SURF) Symposium

Microscale devices can be found in applications ranging from sensors to structural components. The dominance of surface forces at the microscale hinders the assembly processes through nonlinear interactions that are difficult to model for automation, limiting designs of microsystems to primarily monolithic structures. Methods for modeling surface forces must be presented for viable manufacturing of devices consisting of multiple microparts. This paper proposes the implementation of supervised machine learning models to aid in automated micromanipulation tasks for advanced manufacturing applications. The developed models use sets of training data to implicitly model surface interactions and predict end-effector placement and paths that …

Purdue Air Sense: A Methodology For Improving The Accuracy Of Ambient Aerosol Mass Concentration And Size Distribution Measurement With Low-Cost Optical Sensing Techniques, Rishabh Ramsisaria, Satya Sundar Patra, Brandon Emil Boor

The Summer Undergraduate Research Fellowship (SURF) Symposium

There is a global lack of a means for monitoring air pollutant levels at a local level due to expensive and bulky instrument requirements. It is important to monitor toxic gas levels, as well as particulate matter levels, in the atmosphere to study their effects on human health and to further develop city- and community-level air pollution solutions. In this study, with the means of a Raspberry Pi, low-cost Alphasense Optical Particle Counter and gas sensors, and methodical calibration techniques, we built a portable 3-D printed module powered by clean electricity generated by an on-board Voltaic solar cell that measures …

Satellite-Based Monitoring Of Spatiotemporal Changes In Batudulang Forest In Sumbawa, Indonesia, Mohammad Muslim, Arief Budhi Witarto, Wahyu Indrajaya

Makara Journal of Technology

Space-based earth observation technology applicable to forest inventory and monitoring is well known in the scientific community. High-resolution satellite images form an important data source for forest mapping and change detection at regional and national scales. The value of forest change information derived from remote sensing data is significantly enhanced if this information is integrated into a spatially explicit geographic information system. Satellite-based rapid assessment was conducted to measure spatiotemporal changes in Batudulang forest over the years. The general approach to quantify change in the spatial aspect of the forest involved change detection using moderate-resolution imaging spectro-radiometer satellite-based normalized difference …

Strength Structure Analysis Of Main Gate Graving Dock Using Pontoons For Condition Repairs, Budianto Budianto

Makara Journal of Technology

Main gate graving dock with pontoon type can certainly suffered some level of damage after a long period of operation. Many employments within the graving dock can delay the process repair of main gate. The main gate may not be opened, because employees are still working to ship fabrication process under sea waterline. For accommodate these interrelated conditions, the best solution with repair one side of the main gate with type pontoon and employees can still work ship fabrication process in graving dock conducted simultaneously. The repair process conditions must be required main gate structure that consists of only one …

Microstructures And Hardness Of Tig Welded Experimental 57fe15cr25ni Steel, Parikin Parikin, Mohammad Dani, Abu Khalid Rivai, Agus Hadi Ismoyo, Riza Iskandar, Arbi Dimyati

Makara Journal of Technology

The microstructures and hardness of tungsten inert gas (TIG) welded experimental 57Fe15Cr25Ni steel were investigated through optical–scanning electron microscopy analyses and with a hardness tester, respectively. The welding process restructured the constituent atoms into regular and irregular crystal lattices. Rapid cooling of the weld metal allowed the formation of a dendritic (columnar) structure, with porous grains. By contrast, slow cooling influenced HAZ and led to the formation of grain structures. The crystal lattice became more organized and larger than other zones. Meanwhile, the base metal formed circular nets that covered large area inside thick and thin grain boundaries. The diffraction …

Mapping Of Bruise Of Oil Palm Fresh Fruit Bunch During Loading And Transportation From Field To Mill, Andreas Wahyu Krisdiarto

Makara Journal of Technology

Fresh fruit bunches (FFBs) are used as raw materials for palm oil, and their transport from a field is a critical step to maintain their quality. Fruit integrity should be maintained so the mill can efficiently obtain palm oil with less than 5% free fatty acid content. Physical treatments for FFBs during loading to truck bins and transport may cause physical injuries. This research aimed to map fruit bruises. The map can be used as a basis in managing transport of FFBs. Physical injuries were assessed by bruise index (BI), which was calculated by measuring the bruise area and weight …

Benchmarking Product Service System Of Generator Set Distributors, Venny Violetta Tiurindah, Tanika Dewi Sofianti

Makara Journal of Technology

Power generation is an industry that is essential to sustain daily life and competes with generator set distributors. The product service system of distributors must be improved to survive the competition. This research aims to develop tools for benchmarking the product service system of generator set distributors. Benchmarking identifies gaps between a product and other competitors’ products. In this work, a product service system board is used to visualize the current product service system of a generator set distributor. A PPIAF framework and a SERVQUAL framework are adapted to assess product performance and service quality, respectively. AHP is used as …

A Study Of Comparing Cad/Cam Simulated Machining Time With Practical Cnc Machining Time And The Influence Of The Parameter Setting In Cnc, Jinming Wan

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Business and Technology at Morehead State University in partial fulfillment of the requirements for the degree of Master of Science by Jinming Wan on July 11, 2018.

Identification And Optimal Linear Tracking Control Of Odu Autonomous Surface Vehicle, Nadeem Khan

Mechanical & Aerospace Engineering Theses & Dissertations

Autonomous surface vehicles (ASVs) are being used for diverse applications of civilian and military importance such as: military reconnaissance, sea patrol, bathymetry, environmental monitoring, and oceanographic research. Currently, these unmanned tasks can accurately be accomplished by ASVs due to recent advancements in computing, sensing, and actuating systems. For this reason, researchers around the world have been taking interest in ASVs for the last decade. Due to the ever-changing surface of water and stochastic disturbances such as wind and tidal currents that greatly affect the path-following ability of ASVs, identification of an accurate model of inherently nonlinear and stochastic ASV system …

Biomimetic Design And Construction Of A Bipedal Walking Robot, Alexander Gabriel Steele

Dissertations and Theses

Human balance and locomotion control is highly complex and not well understood. To understand how the nervous system controls balance and locomotion works, we test how the body responds to controlled perturbations, the results are analyzed, and control models are developed. However, to recreate this system of control there is a need for a robot with human-like kinematics. Unfortunately, such a robotic testbed does not exist despite the numerous applications such a design would have in mobile robotics, healthcare, and prosthetics.

This thesis presents a robotic testbed model of human lower legs. By using MRI and CT scans, I designed …

Dynamic Model For Simulating Motion Of The Right Ventricle, Brian Michael Larsen, Sam Koopman Porter, John Francis D'Ambrosio

Mechanical Engineering

This report documents all the research, ideation, and mockups used to determine right ventricle motion and develop a system capable of reproducing that motion on a tissue sample. The model is intended for evaluating anchoring systems being developed by Edwards Lifesciences for use with tricuspid valve therapies. Several design solutions were considered for the primary functions of recreating motion of the right ventricle and attaching tissue to the device. From these ideas a primary means of producing motion and attaching tissue was selected. These ideas were then developed over the course of a school year to become the final system …

Bicycle Power Meter, Andrew Mcguan

Computer Engineering

A power meter is a cycling training tool used to record the power a rider is outputting. This is very useful to athletes who regularly do bike workouts, because the power output is a consistent measure of the rider’s effort level, and is not affected by outside factors such as wind or road gradient. If a cyclist does a workout with the intent to carry a certain speed for a certain amount of time, a strong headwind will slow them down and make them work harder to maintain the same speed, defeating the goal of the workout. When a power …

2018 (Spring) Ensi Informer Magazine, Morehead State University. Engineering Sciences Department

ENSI Informer Magazine Archive

The ENSI Informer Magazine published in the spring of 2018.

Structural And Photoluminescence Properties Of Zno Thin Films Deposited By Ultrasonic Spray Pyrolysis, Iwan Sugihartono, Erfan Handoko, Vivi Fauzia, Artoto Arkundato, Lara Permata Sari

Makara Journal of Technology

Zinc oxide (ZnO) thin films on a silicon (Si) (111) substrate were grown herein using ultrasonic spray pyrolysis at 450 °C with different Zn concentrations. The ZnO thin films had X-ray diffraction patterns of a polycrystalline hexagonal wurtzite structure. The (002) and (101) peak intensities changed under different Zn concentrations. Furthermore, according to Scherer's and Stokes–Wilson equations, the crystallite size and the internal strain of the ZnO thin films in the (002) and (101) peaks changed with the Zn concentration. Optically, the photoluminescence spectra indicated that the ratio of the UV/GB emission of the ZnO thin films was the highest …

Anthropomorphically Inspired Design Of A Tendon-Driven Robotic Prosthesis For Hand Impairments, Manali Bapurao Bhadugale

Mechanical & Aerospace Engineering Theses & Dissertations

This thesis presents the design of a robotic prosthesis, which mimics the morphology of a human hand. The primary goal of this work is to develop a systematic methodology that allows a custom-build of the prosthesis to match the specific requirements of a person with hand impairments. Two principal research questions are addressed toward this goal: 1) How do we cater to the large variation in the distribution of overall hand-sizes in the human population? 2) How closely do we mimic the complex morphological aspects of a biological hand in order to maximize the anthropomorphism (human-like appearance) of the robotic …

An Exploratory Study Of Sukuk Utilisation For Transportation Infrastructure Development In Indonesia, Fiona Lamari, Ayomi Dita Rarasati, Meilia Evita

Makara Journal of Technology

Investment in infrastructure is one of the principal drivers of the growth of the economy. For that reason, the Indonesian government has proposed an investment budget in the railway and sea and air transport sectors over the next 10 years. In order to overcome the burden of direct outflows and for the future, a study was conducted to lay down the framework of Shariah-compliant payments for the development of infrastructure in Indonesia in the transport sector. This paper aims to explore the opportunity and implementation of sukuk utilisation to develop transportation infrastructure. Secondary data study and interviews were selected for …

Small-Signal-Stability Enhancement Using A Power-System Stabilizer Based On The Cuckoo-Search Algorithm Against Contingency N-1 In The Sulselrabar 150-Kv System, Muhammad Ruswandi Djalal, Muhammad Yusuf Yunus, Herlambang Setiadi, Awan Uji Krismanto

Makara Journal of Technology

Small-signal stability is one of the main factors limiting power transmission in conventional power systems. This concern is primarily handled by adding damper windings of a synchronous generator and power-system stabilizer (PSS). However, due to the impact of the N-1 contingency, damper windings and a conventional PSS are insufficient to overcome this problem. Proper placement and design of the PSS are crucial for improving stability. One approach to optimizing the placement and tuning of the PSS is to use an artificial-intelligence method. Here, the cuckoo-search algorithm (CSA) is proposed to optimize the PSS tuning and placement. Based on simulation, it …

Isolation And Molecular Weight Characterization Of Tetragonula Laeviceps Honey Protein, Muhamad Sahlan, Nurul Azizah, Kazuaki Hakamada, Keiichi Noguchi, Masafumi Yohda

Makara Journal of Technology

The concentration of protein in honey is lower than polysaccharide. However, recently the honey’s protein is intensively studied and it showed that protein also have several biological activities such as antibacterial activity. The purpose of this research is to isolate and characterize Tetragonula laeviceps honey protein by determining the molecular weight. Honey protein of Trigona laeviceps was isolated using ultra-filtration with the membrane’s size of 30 kDa, then concentrated using tube membrane size 10 kDa. Molecular weight was analyzed by SDS PAGE. From the analysis, there was major protein band in honey produced by Tetragona laeviceps identified. The produced molecular …

Prerequisites For Public Acceptance Of Waste-To-Energy Plants: Evidence From Germany And Indonesia, Uwe Lahl, Barbara Zeschmar-Lahl

Makara Journal of Technology

Construction of waste incinerators often encounters resistance from the public. The minimum requirements for the ac- ceptance of these installations include modern air pollution control (APC) technology and safe disposal of residues. Confidence in the statements of government and government agencies as well as on those who support is an important point of acceptance. Independent scientific bodies such as universities can help to make this happen. In the case of the installation of waste into energy (WtE), such scientific support can be the measurement of emissions and their evalua- tion. Many products that enter the waste stream contain heavy metals, …

Hybrid Brain-Computer Interface: A Novel Method On The Integration Of Eeg And Semg Signal For Active Prosthetic Control, Reza Darmakusuma, Ary Setijadi Prihatmanto, Adi Indrayanto, Tati Latifah Mengko

Makara Journal of Technology

This paper describes a novel method for controlling active prosthetics by integrating surface electromyography (sEMG) and electroencephalograph signals to improve its intuitiveness. This paper also compares the new method (RTA-2) with other existing methods (AND and OR) for controlling active prosthetics. Based on analysis, RTA-2 features higher true positive rate (TPR) and balanced accuracy (BA) than AND method. On the other hand, the new method (RTA-2) yields lower false detection rate (FPR) than OR method. Analysis also shows that RTA-2 possesses equal TPR, FPR, and BA with the detection of movement intention using sEMG-based system. Although the RTA-2 method shows …

Seismic Response Analysis Along The Coastal Area Of Bengkulu During The September 2007 Earthquake, Lindung Zalbuin Mase

Makara Journal of Technology

A strong earthquake of 8.4 Mw occurred at the Sumatra Subduction Zone in September 12, 2007. The area that underwent the impact of the earthquake was located along the coastal area of the Bengkulu Province. A seismic ground response study was then performed with reference to the event. Several site investigations, including standard penetration test and shear wave velocity tests, were conducted to understand the subsoil condition. The data were used to analyze a ground response during the earthquake. The amplification factor of each site was obtained, and a comparison of the spectral accelerations was performed. The results showed that …

Coax-Fed Dipole-Type Applicator For Hepatic Cancer Rf Ablation, Basari Basari, Aditya Rakhmadi, Kazuyuki Saito

Makara Journal of Technology

Cancer is the third leading cause of mortality in the world and is one of the most difficult diseases to detect and cure. This fact motivates us to investigate a treatment method by using radiofrequency (RF) ablation. RF ablation therapy kills cancer cells by electromagnetically heating them up. The treatment uses an applicator that is inserted into the body to heat the cells. The cancer cells are exposed to a temperature of more than 60 °C in short duration (a few seconds to a few minutes), thereby causing cell destruction locally. To ensure effective treatment, a minimally invasive method is …

The Subject Librarian Newsletter, Engineering And Computer Science, Spring 2018, Buenaventura "Ven" Basco

Libraries' Newsletters

No abstract provided.

Extending Maneuverability Of Internally Actuated Underwater Gliders, An Attempt To Develop An Open Platform For Research And Education, Saeedeh Ziaeefard

Dissertations, Master's Theses and Master's Reports

Increasing maneuverability of internally actuated Underwater Gliders (UGs) is inevitable due to high demands in underwater surveillance and reconnaissance missions where agility and stealthiness are the keys to success. High maneuverability is needed to provide the opportunity for optimal trajectory planning, planar motion smoothness, and re-planning adapting to the dynamic environments.

This work explores extending the maneuverability of underwater gliders through coupled improvement in mechanical design, efficient use of internal actuation, and motion planning strategy utilizing flight concatenation. The existence of five flight patterns ``advanced flight", inspired by air gliders, enabled solely by utilizing internal actuation are investigated: Circle, Oval …

Development Of A Desktop Material Extrusion 3d Printer With Wire Embedding Capabilities, Jose Francisco Motta

Open Access Theses & Dissertations

Printed circuit boards (PCB) have been widely used as a permanent solution for generating complex circuitries to power electronic devices. Over the years, PCB boards have proved to be reliable when powering electronic devices. However, when fabricating a printed circuit board, one must outsource to fabricate the boards when in prototype phase. Therefore, the risk of intellectual property theft and long lead time is an issue. The objective of this Thesis is to develop a hybrid multi-tool desktop material extrusion 3D printer that allows for easy integration (modularity) of tools to generate multi-functional 3D printed components.

The addition of an …

Ambiqual – A Full Reference Objective Quality Metric For Ambisonic Spatial Audio, Miroslaw Narbutt, Andrew Allen, Jan Skoglund, Michael Chinen, Andrew Hines

Conference papers

Streaming spatial audio over networks requires efficient encoding techniques that compress the raw audio content without compromising quality of experience. Streaming service providers such as YouTube need a perceptually relevant objective audio quality metric to monitor users’ perceived quality and spatial localization accuracy. In this paper we introduce a full reference objective spatial audio quality metric, AMBIQUAL, which assesses both Listening Quality and Localization Accuracy. In our solution both metrics are derived directly from the B-format Ambisonic audio. The metric extends and adapts the algorithm used in ViSQOLAudio, a full reference objective metric designed for assessing speech and audio quality. …

Consuming Digital Debris In The Plasticene, Stephen R. Parks

Theses and Dissertations

Claims of customization and control by socio-technical industries are altering the role of consumer and producer. These narratives are often misleading attempts to engage consumers with new forms of technology. By addressing capitalist intent, material, and the reproduction limits of 3-D printed objects’, I observe the aspirational promise of becoming a producer of my own belongings through new networks of production. I am interested in gaining a better understanding of the data consumed that perpetuates hyper-consumptive tendencies for new technological apparatuses. My role as a designer focuses on the resolution of not only the surface of the object through 3-D …

Energy Potentials Of Briquette Produced From Tannery Solid Waste, Olatunde Ajani Oyelaran, Faralu Muhammed Sani, Olawale Monsur Sanusi, Olusegun Balogun, Adeyinka Okeowo Fagbemigun

Makara Journal of Technology

The vast quantity of waste generated from industries is one of the serious outcomes of unplanned development, resulting into quantum of hazardous organic and inorganic waste generating daily. Proper waste management is a challenging issue that must be addressed adequately. This is, therefore, carried out with a view of assessing the energy and combustion quality of tannery solid waste with a view of converting them into briquettes for cooking, heating and small home industries and reducing the menace caused by tannery waste disposal. The results of the experiments showed that the combustion rate ranged between 0.171 and 0.217 g/min, the …

Adsorption Of Cu(Ii) Ions In Aqueous Solution Onto Limonia Acidissima Shellbased Activated Carbon: Kinetic And Isotherm Studies, Abrar Muslim, Syahiddin Dahlan Said, Gita Suci Hariati, Siti Fajar Karina, Fauzi Muhammad Djuned, Rizka Mulyawan

Makara Journal of Technology

Adsorption of Cu(II) ions from aqueous solution using activated carbon prepared from Limonia acidissima fruit shell (LAFS-AC) was conducted in batch mode experiments at pH 5 (±0.15), 100 rpm and 1 atm. The effects of contact time, initial Cu(II) ions concentration, KOH concentration, and adsorption temperature on Cu(II) ions adsorption capacity were investigated. Fourier Transform Infrared Spectroscopy and Scanning Electron Microscopy analyses were performed to investigate the active site and surface morphology of the LAFS-AC, respectively. The Cu(II) ions adsorption was fitted very well (R2 = 0.94 on average) to the pseudo second-order adsorption kinetic with the adsorption capacity and …