Mechanical Engineering Commons^™

A Semantic Web Approach To Fault Tolerant Autonomous Manufacturing, Fadi El Kalach, Ruwan Wickramarachchi, Ramy Harik, Amit Sheth

Publications

The next phase of manufacturing is centered on making the switch from traditional automated to autonomous systems. Future factories are required to be agile, allowing for more customized production, and resistance to disturbances. Such production lines would be able to reallocate resources as needed and minimize downtime while keeping up with market demands. These systems must be capable of complex decision-making based on parameters such as machine status, sensory/IoT data, and inspection results. Current manufacturing lines lack this complex capability and instead focus on low-level decision-making on the machine level without utilizing the generated data to its full extent. This …

Damage Stability Study Of A 500 Dw Ro-Ro Ferry Vessel, Zulfaidah Ariany, Budhi Santoso, Sarwoko Sarwoko, Nauval Abdurrahman Prasetyo

Makara Journal of Technology

The development of the crossing transportation industry is currently increasing in the island areas. The use of Ro-Ro type ferry boats is extremely efficient in moving people, goods, and vehicles. The current research focuses on the damage stability of the 500 DWT Ro-Ro ferry, which aims to meet the needs of the Ro-Ro ferry in the archipelago area. The previously existing initial design of a barge hull with a main size Lpp = 40.15 m, B = 12 m, H = 3.2 m, and T = 2.15 m was used to analyze the damage stability condition further. First, the drawings …

Energy Dissipation In A Sand Damper Under Cyclic Loading, Ehab Sabi

Civil and Environmental Engineering Theses and Dissertations

Various seismic and wind engineering designs and retrofit strategies have been in development to meet structures' proper and safe operation during earthquake and wind excitation. One such method is the addition of fluid and particle dampers, such as sand dampers, in an effort to reduce excessive and dangerous displacements of structures. The present study implements the discrete element method (DEM) to assess the performance of a pressurized sand damper (PSD) and characterize the dissipated energy under cyclic loading. The idea of a PSD is to exploit the increase in shearing resistance of sand under external pressure and the associated ability …

Design, Development And Evaluation Of The Ruggedized Edge Computing Node (Recon), Sahil Girin Patel

Theses and Dissertations

The increased quality and quantity of sensors provide an ever-increasing capability to collect large quantities of high-quality data in the field. Research devoted to translating that data is progressing rapidly; however, translating field data into usable information can require high performance computing capabilities. While high performance computing (HPC) resources are available in centralized facilities, bandwidth, latency, security and other limitations inherent to edge location in field sensor applications may prevent HPC resources from being used in a timely fashion necessary for potential United States Army Corps of Engineers (USACE) field applications. To address these limitations, the design requirements for RECON …

Unmanned Aerial System Design For Civil Engineering Operations – A Vip Study, Ezra Robles, Harrison Vicknair, Derek Price, Logan Westra, George Pitcock, Joshua Diamond, Bhuvan Saraswat, Jeremiah Prayor, Fon Saliki

Symposium of Student Scholars

Unmanned Aerial System Design for Civil Engineering Operations – A Case Study

The objective of the project is to design and build a modular Unmanned Aerial System (UAS) that meets the specifications set forth by United Consulting – a local civil engineering company. These specifications are achieved through three unique missions. In each mission, data is collected using different methods. These missions include land surveying, bridge structure inspection and manhole probing. The key requirements of the drone are to maintain a minimum flight time of 30 minutes and the ability to receive and transmit telemetry, photographic and video data from …

Modeling, Control And Estimation Of Reconfigurable Cable Driven Parallel Robots, Adhiti Raman Thothathri

All Dissertations

The motivation for this thesis was to develop a cable-driven parallel robot (CDPR) as part of a two-part robotic device for concrete 3D printing. This research addresses specific research questions in this domain, chiefly, to present advantages offered by the addition of kinematic redundancies to CDPRs. Due to the natural actuation redundancy present in a fully constrained CDPR, the addition of internal mobility offers complex challenges in modeling and control that are not often encountered in literature.

This work presents a systematic analysis of modeling such kinematic redundancies through the application of reciprocal screw theory (RST) and Lie algebra while …

Performance Comparison Of Several Control Algorithms For Tracking Control Of Pantograph Mechanism, Laylaa Mahmoud Eng, Mohamed Shamseldin Dr, Mohamed Sallam Dr, Abdelghany Mohamed Prof

Future Engineering Journal

A sort of parallel manipulator known as a pantograph robot mechanism was created primarily for industrial requests that required high precision and satisfied speed. While tracking a chosen trajectory profile requires a powerful controller. Because it has four active robot links and one robot passive link in place of just two links like the open chain does, it can carry more loads than the open chain robot mechanism while maintaining accuracy and stability. The calculated model for a closed chain pantograph robot mechanism presented in this paper takes into account the boundary conditions. For the purpose of simulating the dynamics …

Relative Rate Observer Self-Tuning Of Fuzzy Pid Virtual Inertia Control For An Islanded Microgrid, Ahmed H. Mohamed, Helmy M. El Zoghby, Mohiy Bahgat, A. M. Abdel Ghany

Future Engineering Journal

Expanding the usage of renewable energy in islanded microgrids leads to a reduction in its total inertia. Low inertia microgrids have difficulties in voltage and frequency control. That affected saving its stability and preventing a blackout. To improve low inertia islanded microgrids' dynamic response and save their stability, this paper presented relative rate observer self-tuning fuzzy PID (RROSTF-PID) based on virtual inertia control (VIC) for an islanded microgrid with a high renewable energy sources (RESs) contribution. RROSTF-PID based on VIC's success in showing remarkable improvement in the microgrid's dynamic response and enhancement of its stability. Moreover, it handles different contingency …

Material Characterization And Comparison Of Sol-Gel Deposited And Rf Magnetron Deposited Lead Zirconate Titanate Thin Films, Katherine Lynne Miles

Mechanical Engineering ETDs

Lead zirconate titanate (PZT) has been a material of interest for sensor, actuator, and transducer applications in microelectromechanical systems (MEMS). This is due to their favorable piezoelectric, pyroelectric and ferroelectric properties. While various methods are available to deposit PZT thin films, radio frequency (RF) magnetron sputtering was selected to provide high quality PZT films with the added capability of batch processing. These sputter deposited PZT films were characterized to determine their internal film stress, Young’s modulus, composition, and structure. After characterization, the sputtered PZT samples were poled using corona poling and direct poling methods. As a means of comparison, commercially …

A Machine Learning Approach To Robotic Additive Manufacturing Of Uv-Curable Polymers Using Direct Ink Writing, Luis A. Velazquez

LSU Master's Theses

This thesis presents the design and implementation of a robotic additive manufacturing system that uses ultraviolet (UV)-curable thermoset polymers. Its design considers future applications involving free-standing 3D printing by means of partial UV curing and the fabrication of samples that are reinforced with fillers or fibers to manufacture complex-shape objects.

The proposed setup integrates a custom-built extruder with a UR5e collaborative manipulator. The capabilities of the system were demonstrated using Anycubic resin formulations containing fumed silica (FS) at varying weight fractions from 2.8 to 8 wt%. To fully cure the specimens after fabrication, a UV chamber was used. Then, measurements …

Multi-Robot Symbolic Task And Motion Planning Leveraging Human Trust Models: Theory And Applications, Huanfei Zheng

All Dissertations

Multi-robot systems (MRS) can accomplish more complex tasks with two or more robots and have produced a broad set of applications. The presence of a human operator in an MRS can guarantee the safety of the task performing, but the human operators can be subject to heavier stress and cognitive workload in collaboration with the MRS than the single robot. It is significant for the MRS to have the provable correct task and motion planning solution for a complex task. That can reduce the human workload during supervising the task and improve the reliability of human-MRS collaboration. This dissertation relies …

Metaversekg: Knowledge Graph For Engineering And Design Application In Industrial Metaverse, Utkarshani Jaimini, Tongtao Zhang, Georgia Olympia Brikis

Publications

While the term Metaverse was first coined by the author Neal Stephenson in 1992 in his science fiction novel “Snow Crash”, today the vision of an integrated virtual world is becoming a reality across different sectors. Applications in gaming and consumer products are gaining traction, industrial metaverse applications are, still in their early stages of development with one of the challenges being interoperability across various metaverse development platforms and existing software tools. In this work we propose the use of a knowledge graph based semantic data exchange layer, the Metaverse Knowledge Graph, to enable seamless transfer of information across platforms. …

2022 (Fall) Ensi Informer Magazine, Morehead State University. Engineering Sciences Department

ENSI Informer Magazine Archive

The ENSI Informer Magazine published in the fall of 2022.

Effect Of Degradation Of Methylene Blue Dye (Mb) By Using Erbium Oxide (Er2o3) Nps, Hind Ahmed Jasim, Farah Farman Abbass, Sarah A. Hamood, Hind Mohammed Hassan, Mohammed Sellab Hamza

Al-Esraa University College Journal for Engineering Sciences

In an experiment investigating the photo catalytic degradation of methylene blue using varied concentrations of Er2O3 nanoparticles, different conditions were tested including with and without sunshine, as well as in the absence of a UV source. The presence of a UV source was also considered in the research. UV-Visible spectroscopy was utilized to characterize the catalysts. The degradation of methylene blue dye was monitored by spectrophotometry by tracking dye absorbance at regular time intervals and adjusting the dye concentration. The results indicated that the most effective degradation of methylene blue dye occurred during a 5-hour irradiation time and in the …

Architecture Between Development And Ability Programs, Allaa Ahmed Rasheed, Ibrahim Jawad Kadhim

Al-Esraa University College Journal for Engineering Sciences

The development of architecture and its pursuit of perfection can only be achieved through society to reach a specific result when meeting new desires that arise as a result of human development, expanding individual and societal needs, and deepening their relationships in multifaceted ways. The research focuses on development as it requires a clear cumulative vision of the integrative relationship between practice and participation in interpreting the act (effect) from the force (influence). It emphasizes that the power of capabilities is understood through learning and education in describing the capabilities of architecture. This involves adopting new ideas and intellectual premises …

The Designing Of Contemporary Teaching- Learning Spaces According To Interactive Flow Action Local School Spaces-A Case Study, Aseel Jasem Al-Ataby, Anwar Subhi Ramadan Al-Qaraghuli

Al-Esraa University College Journal for Engineering Sciences

The world today faces many challenges related to environmental issues, as well as other social and economic challenges, and in light of intellectual, cognitive, and technical transformations, which led to the emergence of many new phenomena and concepts that correspond to them, including the concept of flow. This concept has been associated with many aspects of life, including architecture, whose importance has emerged recently in light of the challenge of the spread of the Corona virus and its effects on architecture with its residential, educational, and other spaces. This research focuses on the flow in the architectural space in general, …

A New Compact Triple-Band Micro-Strip Monopole Antenna Based On Minkowski Fractal Geometry, Hayder S. Ahmed, Zahra' Salah Ahmed, Sarah A. Hamood, Mohammed Sellab Hamza, Taha A. Elwi

Al-Esraa University College Journal for Engineering Sciences

Wireless communication systems have made significant advancements in size reduction, with antenna terminals remaining a primary challenge for system compatibility. As a result, much of industrial research is focused on antenna miniaturization in wireless systems. In this work, a novel compact Triple-Band Fractal (TBF) antenna is proposed, utilizing three coupling fractal patches with varying iteration levels of Minkowski geometry to provide three resonant bands. The antenna design is implemented using an antenna substrate with a dielectric constant of 10.8 and a thickness of 1.27 mm within the CST Microwave Studio environment. The zero iteration patch resonator is responsible for the …

The Role Of Community Participation In The Architectural Production, Allaa Ahmed Rasheed, Ibrahim Jawad Kadhim

Al-Esraa University College Journal for Engineering Sciences

The role of community participation as a power in building architectural output at the level of the act of thinking in architecture and the design process in non-existence is related to power and presence with act. The research is concerned with expanding knowledge in the direction of the holistic language and searching for the role that builds the privacy of the architectural product versus the community's societal identity. It studies the concept of act within the limits of existence at the level of community participation since the act of architecture is the act of man to meet certain needs and …

The Communicative Deviation In Contemporary Architectural Production, Haneen Hosham Abd-Alrahman, Panrizat Q. Hussein Fehmi

Al-Esraa University College Journal for Engineering Sciences

Deviation is one of the most important concepts discussed in various architectural and non-architectural theses when addressing the topic of creative production. It involves breaking away from the familiar and surpassing established architectural rules to create unique and excellent products that are characterized by their creativity and aesthetic appeal. Recognizing the significance of this concept in shaping contemporary architectural production, the research endeavors to explore the concept of connective displacement in architecture and delve into its essential aspects. The research identifies the research problem as the "cognitive deficiency surrounding connective displacement in the semantic structures embedded in architecture." The objective …

Developed Rc4 Algorithm With Double Reverse For Better Data Protect, Fouad Sahib Muhamed Alkhazraji

Al-Esraa University College Journal for Engineering Sciences

Computer security plays a crucial role in protecting users' data, and cryptographic techniques are commonly used for this purpose. Encryption is a method employed to ensure data confidentiality, whether it is stored on hard drives or transferred through various media. RC4 (Rivest Cipher 4) is a cryptographic algorithm that utilizes the same key for both encryption and decryption processes. It falls under the category of stream ciphers, which are widely utilized in numerous protocols due to their flexibility and speed. RC4 employs XOR (exclusive OR) function to implement its encryption and decryption steps. In this paper, a technique known as …

Evaluation Of Material Request Order To Support Sustainable Construction, Fajar Susilowati, Nur Nahdiah Anggraeni

Makara Journal of Technology

This study was conducted on one of Indonesia’s apartment projects, in which reinforced concrete is the main structure. Based on existing project data, this project experienced a decline in the construction work’s progress, thus reducing the project’s overall progress. This decline occurred because the delivery of concrete reinforcement material was delayed. This study aimed to determine the process of material request order and its relationship with the work implementation, as well as the factors that influenced the delayed arrival of concrete reinforcement material at the project site. The method used in this study was observation and interview. Data were analyzed …

Myosin Ii Adjusts Motility Properties And Regulates Force Production Based On Motor Environment, Omayma Y. Al Azzam, Janie C. Watts, Justin E. Reynolds, Juliana E. Davis, Dana N. Reinemann

Faculty and Student Publications

Introduction—Myosin II has been investigated with optical trapping, but single motor-filament assay arrangements are not reflective of the complex cellular environment. To understand how myosin interactions propagate up in scale to accomplish system force generation, we devised a novel actomyosin ensemble optical trapping assay that reflects the hierarchy and compliancy of a physiological environment and is modular for interrogating force effectors.

Methods—Hierarchical actomyosin bundles were formed in vitro. Fluorescent template and cargo actin filaments (AF) were assembled in a flow cell and bundled by myosin. Beads were added in the presence of ATP to bind the cargo AF …

Collaborative Robotics Strategies For Handling Non-Repetitive Micro-Drilling Tasks Characterized By Low Structural Mechanical Impedance, Xiangyu Wang

Mechanical & Aerospace Engineering Theses & Dissertations

Mechanical micro-drilling finds widespread use in diverse applications ranging from advanced manufacturing to medical surgery. This dissertation aims to develop techniques that allow programming of robots to perform effective micro-drilling tasks. Accomplishing this goal is faced with several challenges. Micro-drills suffer from frequent breakage caused from variations in drill process parameters. Micro-drilling tasks afford extremely low feed rates and almost zero tolerance for any feed rate variations. The accompanying robot programming task is made difficult as mathematical models that capture the micro-drilling process complexities and sensitive variations in micro-drill parameters are highly difficult to obtain. Therefore, an experimental approach is …

The Effective Strategies For Mitigation The Impact Of Covid-19 On Construction Projects In Egypt, Nora Magdy Essa, Ibrahim Mahdi, Hassan Mohamed Ibrahim

Future Engineering Journal

From the time when the first narrated infections in Wuhan China, in late 2019, COVID-19 has had a substantial peal on human life and health. By the early of 2020, the World Health Organization (WHO) announced the eruption of COVID-19, a public health crisis of international concern. On 11 March 2020, the World Health Organization officially announced COVID-19 a pandemic. The first case was infected in Egypt of covid-19 on Feb 14, 2020 (Gilbert et al., 2020). On 16 March 2020, the Egyptian Government began issuing decisions as preventative courses as part of the country's inclusive plan to cope with …

Estimating The Weights Of Latticed Power Transmission Towers Using Genetic Programming, Ahmed M. Ebid Dr.

Future Engineering Journal

The recent booming in the power network industry inspired a lot of researchers to develop models to estimate the optimum cost of transmission towers. Unlike previous researches which depended on design the tower from scratch, this research depends on collecting actual database from several projects around the globe and applying the well-known (GP) technique to develop a model to predict the tower weight. The accuracy of the developed formula was about 84%. The developed model could be used in early tender stage or to check design economy.

Developing A Miniature Smart Boat For Marine Research, Michael Isaac Eirinberg

Computer Engineering

This project examines the development of a smart boat which could serve as a possible marine research apparatus. The smart boat consists of a miniature vessel containing a low-cost microcontroller to live stream a camera feed, GPS telemetry, and compass data through its own WiFi access point. The smart boat also has the potential for autonomous navigation. My project captivated the interest of several members of California Polytechnic State University, San Luis Obispo’s (Cal Poly SLO) Marine Science Department faculty, who proposed a variety of fascinating and valuable smart boat applications.

Therapeutic Mechanical Horse, Cade M. Liberty, Aleya Dolorfino, Peter Philips, Zuzanna Dominik, Luke Watts

Mechanical Engineering

Jack's Helping Hand and its hippotherapy participants required a device to serve as an alternative to a live horseback riding experience that could also increase the range of riders. This would provide more clients with equine-assisted therapy that has proven to better the lives of people with both physical and mental disabilities. Horses can be unpredictable, tall, and sometimes anxiety-inducing, especially for new riders. Our group’s aim was to develop a mechanical horse that will be able to reduce these issues for equine therapy centers and the riders they help. When a rider gets to practice sitting on the horse …

Total Sky Imager Project, Ryan D. Maier, Benjamin Jack Forest, Kyle X. Mcgrath

Mechanical Engineering

Solar farms like the Gold Tree Solar Farm at Cal Poly San Luis Obispo have difficulty delivering a consistent level of power output. Cloudy days can trigger a significant drop in the utility of a farm’s solar panels, and an unexpected loss of power from the farm could potentially unbalance the electrical grid. Being able to predict these power output drops in advance could provide valuable time to prepare a grid and keep it stable. Furthermore, with modern data analysis methods such as machine learning, these predictions are becoming more and more accurate – given a sufficient data set. The …

Design And Control Of Next-Generation Uavs For Effectively Interacting With Environments, Caiwu Ding

Dissertations

In this dissertation, the design and control of a novel multirotor for aerial manipulation is studied, with the aim of endowing the aerial vehicle with more degrees of freedom of motion and stability when interacting with the environments. Firstly, it presents an energy-efficient adaptive robust tracking control method for a class of fully actuated, thrust vectoring unmanned aerial vehicles (UAVs) with parametric uncertainties including unknown moment of inertia, mass and center of mass, which would occur in aerial maneuvering and manipulation. The effectiveness of this method is demonstrated through simulation. Secondly, a humanoid robot arm is adopted to serve as …

Cloudbots: Autonomous Atmospheric Explorers, Akash Binoj

Honors Scholar Theses

The CloudBot is an autonomous weather balloon that operates on the principle of variable buoyancy to ascend and descend in the atmosphere. This project aims to develop a device that will collect atmospheric measurements and communicate them mid-flight. The apparatus consists of a helium-filled balloon, the robotic payload, and an air cell. The fixed-volume helium balloon at the top provides an upwards buoyancy force, while the air cell at the bottom can hold a variable amount of pressure to adjust the weight of the CloudBot. By doing so, it is able to travel in storm conditions and collect valuable atmospheric …