Mechanical Engineering Commons^™

Microwave Self-Healing Technology As Airfield Porous Asphalt Friction Course Repair And Maintenance System, Amir Tabakovic, Declan O'Prey, Drew Mckenna, David Woodward

Research and Innovation - Articles

A problem increasingly faced by airport authorities is the maintenance of runways. Due to their large aircraft loadings associated with take-off and landing operations, runways experience surface deterioration. Poor quality runway surfaces cannot be tolerated in such an environment. Maintenance issues must be carried out to maximise safety and minimise the risk of aircraft damage. A recent development has been the introduction of self-healing technologies such as rejuvenator encapsulation, induction and microwave heating to address these issues. This paper summarises a laboratory investigation to determine the effectiveness of microwave self-healing for crack repair of Porous Friction Course (PFC) used for …

Safety Standards Must Be Met For Fire Fighting In Educational Workshops In Industrial Secondary Schools In The Arab Republic Of Egypt, Ibrahim Mahmoud Hassan, Wael Ahmed Rady, Walid Mahmoud El-Nahas

Emirates Journal for Engineering Research

The aim of the research is to establish safety standards for fire fighting within educational workshops in industrial secondary schools to determine the structural requirements for designing workshops in educational buildings and meet international standards. To achieve this a questionnaire was made and data collected for analysis and hypothesis testing using the statistical package of social Sciences (SPSS). Through the adoption of a number of different statistical methods and after conducting the analysis of research data and testing its hypotheses find a number of results, most importantly that the standards conform to international and local standards . The results also …

Urea Functionalization Of Ultrasound-Treated Biochar: A Feasible Strategy For Enhancing Heavy Metal Adsorption Capacity, Baharak Sajjadi, James William Broome, Wei Yin Chen, Daniell L. Mattern, Nosa O. Egiebor, Nathan Hammer, Cameron L. Smith

Faculty and Student Publications

© 2018 Elsevier B.V. The main objective of a series of our researches is to develop a novel acoustic-based method for activation of biochar. This study investigates the capability of biochar in adsorbing Ni(II) as a hazardous contaminant and aims at enhancing its adsorption capacity by the addition of extra nitrogen and most probably phosphorous and oxygen containing sites using an ultrasono-chemical modification mechanism. To reach this objective, biochar physically modified by low-frequency ultrasound waves (USB) was chemically treated by phosphoric acid (H3PO4) and then functionalized by urea (CO(NH2)2). Cavitation induced by ultrasound waves exfoliates and breaks apart the regular …

The Influence Of Asphalt Ageing On Induction Healing Effect On Porous Asphalt Concrete, Shi Xu, Xueyan Liu, Amir Tabakovic, Erik Schlangen

Articles

Induction healing is a proven technology which is able to improve the self‐healing capacity of asphalt concrete. Healing is achieved via electromagnetic current produced by passing induction machine, where steel asphalt constituents heat up which in turn soften the bitumen in the asphalt layer, allowing it to flow and close cracks, repairing the damage. This paper reports on the study which investigated the influence of ageing on the healing capacity of Porous Asphalt (PA) concrete. Porous Asphalt concrete mix was prepared first, then subjected to an accelerated (laboratory) ageing process using a ventilated oven. In order to further evaluate the …

Numerical Simulation For The Hydrodynamic Performance Of Hydropower Turbine Near Free Surface, Zeda Yin

Theses, Dissertations and Capstones

The performance of hydropower turbine in shallow water can be affected by the presence of free surface. Therefore, it is of great interest to investigate the influence of free surface on hydropower turbine performance through computational simulations. For a better understanding of flow field around hydropower turbine operating in shallow water, it is important to analyze the flow over a single hydrofoil beneath free surface first. Therefore, as the first part of this thesis, the Computational Fluid Dynamics (CFD) methodology was used for numerical simulation of 2D unsteady incompressible viscous flow over a hydrofoil under the free surface. The computation …

Proposed Delivery And Return Water Temperatures For Dartmouth College Hot Water Network, Storm Mata

ENGS 86 Independent Projects (AB Students)

This study aimed to verify the viability of the planned hot water heating network at Dartmouth, and determine the necessary hot water radiator areas needed to satisfy the empirically-determined heat demand for buildings on campus, using 5 year of steam con- sumption data. In order to verify viability, the pressure and temperature of the delivery steam and return condensate of the current heating network were used to find the amount of heat delivered per pound of steam to campus. The above-mentioned steam consump- tion data were then used to find the max heat demand for the past five years and …

A Novel Approach Towards Investigating The Performance Of Different Pvt Configurations Integrated On Test Cells: An Experimental Study, Vivek Tomar, Brian Norton, G. N. Tiwari

Articles

This study elaborates the theoretical and experimental analysis for the effectiveness of different photovoltaic thermal (PVT) configurations along with their building implications. An experiment was performed on especially designed four identical prototype test cells emphasise the building integration photovoltaic thermal (BiPVT) systems. A comparative analysis of four different possible PVT configurations integrated on identical test cells namely; Case 1: Glass-to-glass PV with duct integrated on a test cell, Case 2: Glass-to -glass PV without duct integrated on a test cell, Case 3: Glass to tedlar PV with duct integrated on a test cell and Case 4: Glass to tedlar PV …

Calculation Methods Of Radon-222 Radiological Activity For Norm Plant With Ventilation, Pedro M. Dieguez-Elizondo, Paul G. O'Donohoe, Tomas Gil-Lopez, Juan Castejon-Navas, Miguel A. Gálvez-Huerta

Articles

A procedure is proposed to determine the radiological activity of air present in the working area of a NORM (Naturally-Occurring Radioactive Materials) plant. This NORM plant is located in the United Arab Emirates and is dedicated to the recycling of material and equipment used in oil extraction facilities. Substantial quantities of NORM waste will be present inside the enclosed plant facilities and will exhale significant amounts of Radon-222 into the working environment. The continued inhalation of this gas and its progeny has been shown to cause lung cancer. In order to reduce the concentration level of the aforementioned gas to …

The Scaling Limit Of The Membrane Model, Alessandra Cipriani, Biltu Dan, Rajat Subhra Hazra

Journal Articles

On the integer lattice, we consider the discrete membrane model, a random interface in which the field has Laplacian interaction. We prove that, under appropriate rescaling, the discrete membrane model converges to the continuum membrane model in d ≥ 2. Namely, it is shown that the scaling limit in d = 2, 3 is a Holder continuous random field, while in d ≥ 4 the membrane model converges to a random distribution. As a by-product of the proof in d = 2, 3, we obtain the scaling limit of the maximum. This work complements the analogous results of Caravenna and …

Ua66/9/1 Ogden College Of Science & Engineering Engineering Administration, Wku Archives

WKU Archives Collection Inventories

No abstract provided.

The Tides They Are A-Changin’: A Comprehensive Review Of Past And Future Nonastronomical Changes In Tides, Their Driving Mechanisms And Future Implications, Ivan D. Haigh, Mark D. Pickering, J.A. Mattias Green, Brian K. Arbic, Arne Arns, Soenke Dangendorf, David Hill, David A. Jay, Multiple Additional Authors

Civil and Environmental Engineering Faculty Publications and Presentations

Scientists and engineers have observed for some time that tidal amplitudes at many locations are shifting considerably due to non-astronomical factors. Here we review comprehensively these important changes in tidal properties, many of which remain poorly understood. Over long geological time-scales, tectonic processes drive variations in basin size, depth, and shape, and hence the resonant properties of ocean basins. On shorter geological time-scales, changes in oceanic tidal properties are dominated by variations in water depth. A growing number of studies have identified widespread, sometimes regionally-coherent, positive and negative trends in tidal constituents and levels during the 19th, 20th and early …

Atomistic Simulations Of Nanoindentation Response Of Irradiation Defects In Iron, M. Mustafa Azeem, Qingyu Wang, Muhammad Zubair

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Radiation response of a material is a consequence of defects' evolution in any radiation damage event. The radiation-induced defects can significantly alter the mechanical properties of a material. Radiation damage initiates from incident neutron by bombardment on solid material causing production and evolution of Frenkel defects. Since voids are formed due to aggregation of a large number of vacancies that cause dimensional changes and hence irradiation-induced swelling. In order to characterize the effect of irradiation defects, we have performed molecular dynamics (MD) simulations to investigate nanoindentation response of point defects and voids in Fe and their effects on mechanical parameters. …

Ua66/9/2 Ogden College Of Science & Engineering Engineering Publications, Wku Archives

WKU Archives Collection Inventories

Publications created by and about the Engineering department.

Ua66/9/3 Ogden College Of Science & Engineering Engineering Student Organizations, Wku Archives

WKU Archives Collection Inventories

Records created by and about Engineering department student organizations.

Economic Appraisal Of Hybrid Solar-Biomass Thermophotovoltaic Power Generation, C. M. Iftekhar Hussain Cmih, Aidan Duffy, Brian Norton

Conference Papers

The techno-economic parameters that influence the commercial deployment of hybrid thermophotovoltaic (TPV) solar power generation are determined using annual system simulations. It has been found that a TPV cell price of E5/cm2 or less together with a TPV operating temperature under 800°C is required for a hybrid solar–biomass TPV power plant to be economically competitive with the state-of-the-art hybrid solar–biomass Rankine cycle power plants.

What Is A Bim Design Model?, James Peters, Malachy Mathews

Conference papers

The recent report into Building Information Management or BIM, by construction law experts May Winfield and Sarah Rock entitled “Winfield Rock Report” [1] gives reason to state that the UK architectural, engineering and construction industry or AEC, is hindered by the absence of a clear definition of Level 2 BIM. The ISO 19650-2 standard published in 2019, is based upon PAS1192-2:2013. The intent of ISO 19650-2 is to provide a road map to facilitate the standardisation of BIM process in a uniformed fashion. A key pillar of ISO 19650 is the “information cycle” and central to this is a federated …

Employing 2-D Cfd & Lrb Model Around Trees To Improve Vawt Placement, David Chukwuebuka Bassey

All Graduate Theses, Dissertations, and Other Capstone Projects

In the placement of vertical axis wind turbines, trees are a constant presence in the vicinity. They are found to grow at different height and shape configurations. And in areas such as the Minnesota State University, Mankato (MNSU) campus, they serve as blockage to airflow; limiting the efficiency of installed turbines. This work sets the precedent for the validation of vegetative numerical models created for the Xcel Energy Research Development Fund (RDF) project.

Using two-dimensional (2-D) numerical simulations of porous cylinders placed in a rectangular medium of air, insight into the flow profile and distribution in the leeward side of …

Literature Survey Of Wet-Waste And Hydrothermal Carbonization System: A Comparative Evaluation, Ramat Olaide Yusuf

Dissertations and Theses

This thesis describes the process of Hydrothermal carbonization and a comparative assessment on recent work done on the process using different feedstocks such as Raw Apple (RA), Apple chip pomace (ACP), apple juice pomace (AJP), grape pomace (GP), macadamia nut-shell (MNS), Sewage Sludge (SS), Poultry Litter (PL) and Grape Marc (GM). The data obtained from the literature survey was compared with the data obtained by the CCL team on the SWPS gasifier (HTC of poultry litter) to obtain how carbon conversion efficiency, syngas composition, thermal efficiency, char production rate, gas production rate and energy utilization vary with carbonization process conditions, …

Development Of Electromagnetic Friction Dampers For Improving Seismic Performance Of Civil Structures, Mohsen Amjadian

Dissertations and Theses

Energy dissipation is critical to limiting damage to civil structures subjected to extreme natural events such as earthquakes. Friction is one of the most reliable mechanisms of energy dissipation that has been utilized extensively in friction dampers to improve seismic performance of civil structures. Friction dampers are well-known for having a highly nonlinear hysteretic behavior caused by stick-slip motion at low velocities, a phenomenon that is inherent in friction and increases the acceleration response of the structure under control unfavorably, in spite of the fact that the displacement is generally reduced because of the energy dissipation. This increase in acceleration …

A Review Of 3d Gis For Use In Creating Virtual Historic Dublin, Alain Chenaux, Maurice Murphy, S. Pavia, S. Fai, T. Molnar, John Cahill, Shane Lenihan, A. Corns

Conference papers

This paper illustrates how BIM integration with GIS is approached as part of the workflow in creating Virtual Historic Dublin. A design for a WEB based interactive 3D model of historic buildings and centres in Dublin City (Virtual Historic Dublin City) paralleling smart city initiates is now under construction and led by the National Monuments at the Office of Public Works in Ireland. The aim is to facilitate the conservation and maintenance of historic infrastructure and fabric and the dissemination of knowledge for education and cultural tourism using an extensive Historic Building Information Model. Remote sensing data is now processed …

Experimental And Numerical Characterization Of Multiphase Subsurface Oil Release, Feng Gao

Dissertations

Subsurface oil release is commonly encountered in the natural environment and engineering applications and has received the substantial attention of researchers after the disastrous Deepwater Horizon Blowout oil spill in 2009. The main focus on the present research is to systematically study the hydrodynamics of underwater oil jet under a variety of conditions, including the effect of dispersant and different gas to oil ratios (GOR) by using experimental measurement as well as a Computational Fluid Dynamics (CFD) approach, from which the measured turbulent characteristics (e.g., velocity, turbulent kinetic energy, turbulence dissipation rate, etc.) of underwater oil jet are thoroughly examined …

Elevated Temperature Progressive Damage And Failure Of Duplex Stainless Steel, Darren P. Luke

Civil Engineering ETDs

Ductile failure of metals has been the focus of research efforts within academia and industry for many years since it is tremendously important for understanding the failure of structures under extreme loading conditions. However, limited research has been dedicated to elevated temperature ductile failure, which is critical for evaluating catastrophic events such as industrial, structural or shipping vessel fires. A detailed investigation was conducted on the structural response of Duplex Stainless Steel at elevated temperatures. The temperature dependence of elastic modulus, yield strength, ultimate strength, and ductility was measured up to 1000°C and a continuum damage plasticity model was developed. …

Optimal Placement Of Distributed Energy Storage Systems In Distribution Networks Using Artificial Bee Colony Algorithm, Choton K. Das, Octavian Bass, Ganesh Kothapalli, Thair S. Mahmoud, Daryoush Habibi

Research outputs 2014 to 2021

The deployment of utility-scale energy storage systems (ESSs) can be a significant avenue for improving the performance of distribution networks. An optimally placed ESS can reduce power losses and line loading, mitigate peak network demand, improve voltage profile, and in some cases contribute to the network fault level diagnosis. This paper proposes a strategy for optimal placement of distributed ESSs in distribution networks to minimize voltage deviation, line loading, and power losses. The optimal placement of distributed ESSs is investigated in a medium voltage IEEE-33 bus distribution system, which is influenced by a high penetration of renewable (solar and wind) …

College Of Engineering Senior Design Competition Fall 2018, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs, and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge. The senior design competition helps focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects on …

Conversion Of Heat Energy From Cooling Water Of Diesel Engine To Electrical Energy Using Thermoelectric Generator, Muhammad Hasan Albana

Makara Journal of Technology

This research objective is to convert heat from the radiator fluid of a diesel engine to electrical energy by utilizing a thermoelectric generator (TEG). The TEG consists of 20 semiconductors (TE modules) and is equipped with a heat sink. The research shows that using the TEG, the heat of radiator fluid can be converted to electrical energy, although the electricity generated is small. The maximum electrical voltage generated by the TEG when modules were connected in series was 10 volts. When the TE modules were connected in parallel and series-parallel, the maximum voltages generated were 2.11 and 2.53 volts, respectively. …

Immittance Response On Carboxymethyl Cellulose Blend With Polyvinyl Alcohol- Doped Ammonium Bromide-Based Biopolymer Electrolyte, Norfatihah Mazuki, Yuki Nagao, Ahmad Salihin Samsudin

Makara Journal of Technology

The blended carboxymethyl cellulose (CMC) and polyvinyl alcohol (PVA) doped with various compositions of ammonium bromide (NH4Br)-based solid biopolymer electrolytes (SBEs) were prepared by using the casting method. In this present work, CMC/PVA–NH4Br SBE thin film was used to investigate the electrical conductivity via electrical impedance spectroscopy. The maximum conductivity obtained was 3.21 X 10−4 S cm−1 for sample AB20 at ambient temperature (303 K), and this result might be due to the increased number of charge carrier. A dielectric study was conducted to understand the conductivity behavior. The electrical properties have been measured as a function of frequency of …

Transition Metal Dichalcogenide For High-Performance Electrode Of Supercapacitor, Saifful Kamaluddin Muzakir, Ahmad Salihin Samsudin, Bouchta Sahraoui

Makara Journal of Technology

Molybdenum dichalcogenides have been reviewed from the perspectives of bandgap, conductivity, and oxidation states of transition metal. Researchers have concluded that a narrow-bandgap transition metal dichalcogenide with high conductivity could be achieved for the high-performance electrode of a supercapacitor.

Automated Compilation Test System For Embedded System, Mohamad Khairi Ishak, Ooi Jun Hwan, Teh Jiashen, Nor Ashidi Mat Isa

Makara Journal of Technology

Embedded system testing involves testing an integration of software and hardware. It is increasingly difficult to evaluate the functionality of each module within a short time because of the increasing number of tests required. In this paper, a novel stepwise methodology involving the use of an automated compilation test system (ACTS) is proposed, to improve the quality of testing and optimize the testing time using automation. Using the proposed method, the testing coverage can be maximized, while minimizing the manual work and testing time required. This ACTS was used to automate the test code compilation and execution for different hardware …

Activated Carbon Fixed-Bed Adsorber Design For Treating Chromium Hexavalent Wastewater, Tedi Hudaya, Velicia Rachmat

Makara Journal of Technology

Pollution caused by industrial wastewater containing heavy metals is a major issue, primarily due to its toxic nature. A cheap yet effective method to deal with such wastewater is activated carbon adsorption. The purpose of this research is to evaluate and design a fixed bed adsorber with granular activated carbon as an adsorbent to process wastewater-containing chromium hexavalent (Cr 6+). Experiments show that the Langmuir isotherm fits the equilibrium data as effectively as the Freundlich isotherm. Activated carbon used in this research is Jacobi 2000® derived from bituminous coal. The lab scale inlet volumetric flow is 100 mL/h with different …

A 2.3/3.3-Ghz Dual Band Low Noise Amplifier Using Switchable Load Inductor In 0.18-Um Cmos Technology, Taufiq Alif Kurniawan, Hsiao-Chin Chen

Makara Journal of Technology

In this paper, the dual band low noise amplifier is designed in 0.18-μm CMOS technology. By combining the proposed switchable load inductor for gain controlling and the conventional inductive source degeneration topology, narrow band gain and good impedance matching are achieved at 2.3/3.3-GHz frequency bands. The new mathematical analysis of low noise amplifier design is derived to define the component parameters of the proposed circuits. The proposed low noise amplifier exhibits gain of 17.18 dB and 15.5 dB, and noise figure of 2.67 dB and 2.52 dB at the two frequency bands, respectively.