Mechanical Engineering Commons^™

Impact Of Merging Basalt Fibers With Various Types Of Concrete And The Factors Affecting Them: A Review, Adil M. Jabbar, Lubna S. Dankha

Al-Esraa University College Journal for Engineering Sciences

This paper reviews effecting of blending basalt fibers into concreteon mechanical properties, ductility, and toughness. Based on concretecomponents, the perfect basalt fiber percentage can differ and is influencedby factors like fiber length, w/c ratio, and age. The beneficial basalt fiberspercentage is lower than that of steel fibers. Even with a low concentrationof basalt fibers, concrete tensile and flexural strength can be improved moreeffectively than a higher amount of steel fibers. As the amount of basaltfiber increases, the mix workability decreases. Additionally, the flow abilitymay drop slightly as the length of the fibers increases. Adding basalt fiber toconcrete can minimize drying …

Air-Jet Bioprinting Of Stem Cell-Encapsulated Alginate Micro-Droplets For Organoid Biomanufacturing, Mirabella B. Stump

Electronic Theses and Dissertations

Biomanufactured 3D-organoids show promise for modeling and treating various conditions, particularly insulin-dependent diabetes mellitus (type-1 diabetes). Pancreatic islet organoids serve as sustainable sources of insulin-producing β-cells, potentially restoring insulin regulation in patients and providing a long-term solution for diabetes. Hydrogel droplet printing is an emerging technique in regenerative medicine due to its advantageous tunability and biocompatibility; however, challenges of consistency, quality control, and scalability persist. To address these issues, we developed a novel air-jetting based droplet bioprinting system for the generation of monodispersed alginate micro-droplets. The objective of this project was to incorporate human induced pluripotent stem cells (hiPSCs) into …

Clean Energy & Sustainable Environment By Carbon Dioxide Mitigation Strategies, Md Fahim Shahriar

Mechanical Engineering Theses

Dissolution trapping is one of the most dominant mechanisms for secure storage of CO₂ injected in porous subsurface formations saturated with brine. This study uses a 2D visual Hele-Shaw cell to investigate and visualize the impact of CO₂ injection locations, reservoir dipping angle, permeability heterogeneity, and brine with different initial ionic concentrations on the density-driven convection during CO₂ dissolution (Chapter 2). Also, the role of complex heterogeneity, i.e., irregular permeability distribution in CO₂ dissolution, is investigated using a novel experimental approach to create medium permeability heterogeneity in Hele-Shaw cells (Chapter 3). We observed that the presence …

Numerical Investigations Of Sco2 Compressor Aerothermodynamics Using A Streamline Curvature Based Throughflow Method, Victor Quintanilla

UNLV Theses, Dissertations, Professional Papers, and Capstones

Supercritical carbon dioxide (sCO₂) has emerged as a promising working fluid for the Brayton power cycle, offering enhanced efficiency due to the high density and low viscosity of carbon dioxide (CO₂) near the critical point. A critical component of the sCO₂ Brayton cycle is the turbomachinery, namely the compressor, which significantly contributes to the efficiency enhancement in the sCO₂ Brayton cycle owing to reduced compression work requirements. Its primary function involves elevating the fluid's pressure, effectively priming it for the subsequent heat addition process from a thermal energy source. However, despite its advantages, challenges …

Characterization Of Interlayer Laser Shock Peening During Fused Filament Fabrication Of Polylactic Acid (Pla), Fabien Denise

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

The field of additive manufacturing (AM) has gained a significant amount of popularity due to the increasing need for more sustainable manufacturing techniques and the adaptive development of complex product geometries. The problem is that AM parts routinely exhibit flaws or weaknesses that affect functionality or performance. Over the years, surface treatments have been developed to compensate certain flaws or weaknesses in manufactured products. Combining surface treatments with the modularity of additive manufacturing could lead to more adaptable and creative improvements of product functions in the future. The current work evaluates the feasibility of pursuing a new research axis in …

The Effects Of Engineering Summer Camps On Middle And High School Students’ Engineering Interest And Identity Formation: A Multi-Methods Study, Timothy Robinson, Adam Kirn, Jenny Amos, Indira Chatterjee

Journal of Pre-College Engineering Education Research (J-PEER)

This multi-methods study explores changes in engineering interest and identity of middle and high school students (n = 79) attending introductory-level engineering summer camps at a large western land grant university. Middle school is a critical time when student interest, identity, and subsequently career choice begin to emerge and hence it is important that at this age students are given accurate information about engineering majors in college and future career opportunities in engineering. Data were collected over a period of two years in six summer camps. Three separate populations of middle and high school students participated in the summer …

Comparative Evaluation Of Investigation Methods For Estimating The Load-Dependent State Of Charge And End Of Discharge Of A Multirotor Uav Battery, Hanna Dibbern, Morten Roßberg, Claudia Werner

Journal of Aviation Technology and Engineering

As the scope of multirotor unmanned aerial vehicle (UAV) applications increases, more attention is being paid to UAV energy requirements, which vary depending on the mission profile. To obtain accurate information about the UAV battery during flight, the idea of a digital twin including a battery state estimation model is promising. For battery state estimation, a Kalman filter combination is the preferred approach in the literature. Comparing different Kalman filters, the unscented Kalman filter has a more accurate estimation for nonlinear systems compared to the extended Kalman filter. In the application of UAV flight with load-dependent flight missions, the comparison …

Stereoscopic-Based Mass Properties Estimation For Warhead Fragments, Alessia Nocerino, Katharine Larsen, Riccardo Bevilacqua, Elisabetta L. Jerome

Student Works

FRAGMENTATION characteristics such as spatial distribution, number of fragments, fragment velocity, and fragment mass can be used to characterize the lethality of a fragmenting weapon or any metal cased explosive [1,2]. However, most warhead tests and evaluations are limited to static arena testing, where fragment characteristics must be collected by hand. Recently, stereoscopic imaging techniques have been added to static arena tests. Using this method, position tracks can be collected for each fragment, and then velocity information can be found. This paper proposes a method to estimate the mass and moment of inertia using data collected by a stereoscopic imaging …

Employment Of Intelligent Predictive Maintenance On Thermal Power Plant Component Parts Taking Condenser Vacuum As A Case Study, Titus Ajewole

Tanzania Journal of Engineering and Technology (TJET)

This work proposes deployment of machine learning in the maintenance of individual constituent parts of steam power plant assemblages. With the condenser vacuum of a steam turbine (in a six-turbine plant assemblage) taken as a case study, information on the past operating parameters of the selected plant component was used to forecast its future working condition. Based on Exponential Gaussian Process of Regression, a model was developed, trained using the diachronic operational data, and employed in determining the future. A quantitative evaluation was employed to provide the distribution of the test values of the data about the lines of regression, …

Computational Modeling Using A Novel Continuum Approach Coupled With Pathway-Informed Neural Networks To Optimize Dynein-Mediated Centrosome Positioning In Polarized Cells, Arkaprovo Ghosal, Padmanabhan Seshaiyar Dr., Adriana Dawes Dr., General Genomics Inc.

Annual Symposium on Biomathematics and Ecology Education and Research

No abstract provided.

Dependence Of The Granulometric Composition Of Chalk During Granulation In A Turbulized Layer, N.A. Annaev, S.Kh. Nurmukhamedov, Zh.V. Sultonov, N.Sh. Khudoiberdieva

Chemical Technology, Control and Management

The article presents the results of an experimental study on chalk granulation in the turbulized layer of a turboblade granulator. The design of the apparatus combines the following sequential processes: grinding, granulating and compacting newly formed granules. In addition, this device has the ability to carry out both rotational and reciprocating motion. It has been established that preliminary grinding of the feedstock increases the efficiency of the granulation process and improves the quality of the finished product. In the experiments, four substances were used to create 2 astringent suspensions and the optimal combination and their ratios were determined. The experiments …

Effect Of Fire Flame On Some Mechanical Properties Of Self-Compacting Concrete, Haider Sadiq M. Ali, Nabeel A-M. Albayati, Basman R. Mohammed, Adil M. Jabbar

Al-Esraa University College Journal for Engineering Sciences

This paper presents an experimental investigation of the effect of fire flame on self-compacting concrete. The experimental program included casting cylinder and prism concrete specimens for compressive strength, modulus of elasticity, modulus of rupture, and concrete density tests. The specimens are exposed to fire flame at 800 ºC approximately for 2 hours or 6 hours. Then the specimens were cooled either in a fast or slow manner. Test results show that the compressive strength was reduced by about (54 - 61)% for fire exposure of 6 hours and by (27 - 37)% for 2 hours of exposure and cooled slowly …

Manual Preparation Of Eyeglasses Based On Corneal Topographical Images For Keratoconus Patients, Bassma Sabah Majeed, Faiz F. Mustafa, Nebras H. Ghaeb

Al-Esraa University College Journal for Engineering Sciences

keratoconus (KCN) is a non-inflammatory, progressive thinning process of the cornea. It is considered one of the advanced biomechanical changes on the corneal surface, and methods of treatment in late cases are special designed contact lenses or surgical intervention. The objective of this paper is to customize the standard eyeglass lens in a way so that it fits with the abnormal shape and changes of the surface of the cornea of a patient suffering from KCN disease.The proposed method here, based on manual scratching of the external surface of the standard eyeglass lens under supervising of an expert optometrist, where …

Age-Friendly Educational Buildings Primary Schools In Kerbala - A Case Study, Anwar Fadhil Hussein, Ibrahim Jawad Kadhim

Al-Esraa University College Journal for Engineering Sciences

The concept of age-friendly societies has gained international attention among researchers, policy makers, and community organizations since the World Health Organization launched the Friendly Communities Project in 2006, to address challenges in some countries, as these challenges affect all aspects of society, and the educational environment represents an important joint of those joints, being the environment that is the most effective and influential in shaping human behavior. The age stage that is most affected and capable of learning and shaping behavior is of importance, which is the childhood stage. Therefore, the research focused on school buildings, as they represent an …

The Role Of Enhancing Interaction With The Natural Environment In Achieving Social Interaction For Children In Orphanage Institutions, Shamael M. W. Al Dabbagh, Zainab Khalid Rashad Al Khafaji

Al-Esraa University College Journal for Engineering Sciences

The child deprived of family care is considered the child most in need of attention and care. When the orphan child enters a new environment for him, it is obvious that he feels alienated, isolated, and loses the sense of interaction and communication with society. The research sees the possibility of mitigating this feeling by enhancing interaction with the natural environment within the internal spaces of the orphanage building and at the neighborhood level. In order to solve the research problem, the research adopted a hypothesis stating that "interaction with the natural environment enhances the achievement of social interaction for …

The Role Of Academic Competitions In Promoting Architectural Education: Tamayouze Excellence Award In Iraqi Architectural Education - Case Study, Nairy Mugardich Krikor, Anwar Subhi Ramadan

Al-Esraa University College Journal for Engineering Sciences

The importance of architectural competitions has emerged in finding the best designs, upgrading and architectural advancement in both practice and thinking. Architectural competitions have become intellectual meetings that contribute to stimulating self-learning and encouraging creativity. They act as an educational tool that leads to competition, giving motivation to the development of skills and learning, in a way that enhances the integration between architectural theory and practical practice for both engineers and architecture students. The research was concerned with studying the effective role of academic competitions in architectural education as one of the ways to improve teaching and learning, and to …

Analysis And Mitigation Of Cyber-Attacks Targeting Infrastructures Operated By Iot Systems, Raja Salih Mohammed Hasan, Nadia Mahmood Ali, Ihsan Jabbar Hasan

Al-Esraa University College Journal for Engineering Sciences

Numerous countries have a high impact on providing the planet with critical infrastructures offering very important services employed in different fields such as water resources management, public services, power grids, telecoms, commercials, and transportation. The increasing solutions in IoT systems made it possible to exploit internet connection services for supporting the critical infrastructures. The latest are being targeted by various types of cyber-attacks due to the advancement in internet services. Therefore, improving the security systems and the ways to detect the threats is highly required. Meanwhile, protecting the critical infrastructures from hostile cyber-attacks is of high significance. This article examines …

Reliability Assessment Model Of Network Operating System Based On Convolution Neural Network, Jamal N. Hasoon, Sarah S. Qasim, Mohammed A. Alshomali, Jane J. Stephan

Al-Esraa University College Journal for Engineering Sciences

The paper's subject is one of the points of fundamental significance in improving the development of complex computer systems is the effect of errors since their probability of occurrence in a widely distributed system is exceptionally high. Thus, the computer system must be dependable and provide comprehensive support for fault tolerance, fault detection, signal recovery mechanisms, failure prediction, etc. The goal is to develop a way to evaluate the reliability of the Red Hat Linux operating system utilizing data sets of system failures obtained from system injection with error reports using the Fault Injection Benchmarking and Reliability) FIBR( (for a …

Investing Traditional Architecture That Fulfills The Supreme Human Needs With Its Spiritual Dimension In Reconstruction / The Architecture Of Old Mosul City, A Case Study, Sinan Mohammad Talee Al-Saffar, Anwar Subhi Ramdan Al - Qaraghuli

Al-Esraa University College Journal for Engineering Sciences

Architecture has sought since time immemorial to meet multiple human needs, starting from the basic physiological needs for human survival, psychological needs (social and individual) to needs related to human progress, such as taking into account the aesthetic and spiritual aspects, which represent the highest levels of those needs, through a set of design aspects and characteristics. This research is based on the study of the spiritual dimension of higher human needs in general that architecture seeks to meet, by studying that in the architecture of traditional cities, in particular, to enhance architectural knowledge with regard to the importance of …

The Role Of Algorithms In Formulating The Architectural Formation, Ghada Ghalib Abdul Wahab, Younis Mahmood M. Salem

Al-Esraa University College Journal for Engineering Sciences

Algorithms are mathematical processes that provide step-by-step instructions for solving a specific problem. They are commonly used in computer science and other technical fields to automate processes and solve complex problems. One great application of algorithms is the generation of shapes. Algorithms can be used to create complex shapes and patterns that are difficult or impossible to create manually. We will explore how algorithms can be used as a mechanism to generate shapes by adopting the Voronoi algorithm because it provides a wide environment for creativity through new intellectual processes that may not occur at all in the human mind …

The Detection Of Android Malwares Using The Features Selection Technique, Farah Rafid Salman, Amer Abdulmajeed Abdulrahman

Al-Esraa University College Journal for Engineering Sciences

The use of Android smartphones has been rising quickly as Internet-based services gain more popularity and develop. The Android operating system's enormous popularity has drawn malware attacks on these devices. It is difficult and ineffective to detect malware versions with features that modify their behavior in order to avoid detection by machine learning (ML) techniques. Effective feature selection plays a crucial role in detecting malware characteristics and reduces the dimensionality of a large dataset by removing unnecessary features that are not useful and keeping those relevant features that increase classification accuracy and detection rate. This helps to solve the problems …

A Review Of Polymer – Particles Composite Materials, Ismail Ibrahim Marhoon, Ayad Abbood Abdul Al-Hassan, Mohammed Ali Abdulrehman

Al-Esraa University College Journal for Engineering Sciences

In several engineering applications traditional materials are replacedby composite materials. Filled composite materials consist of the continuousmatrix and the filling particles. The primary purpose of introducing inorganicsolid particles into polymers is to essentially increase mechanical and physicalproperties. The wear properties of polymer composite can be changed to agreater degree by modifying the process of preparing the filled compositematerials. In the present review, a large-scale research has been conductedon the effect of wear on the composites of polymers. The effect of filler onthe polymer composites wear behavior has been thoroughly explained

Ability Of Replacing The Steel Strands By Cfrp In Pre-Stressed Concrete Girders: Art Review, Ahmed Salim Edan, Wael Shawky Abdulsahib

Al-Esraa University College Journal for Engineering Sciences

Fiber-reinforced polymer (FRP) composites are the modern,trustworthy alternatives to steel tendons and rebars. The bulk of currentresearch is devoted to establishing the feasibility of incorporating carbonfibre-reinforced polymer (CFRP) into reinforced concrete girders byevaluating the strength and reliability of CFRP and concrete components.In order to improve fatigue and corrosion resistance, CFRPs are crucial.Comparing reinforced prestressed concrete bridge girders strengthenedwith conventional steel reinforcement to those reinforced with CFRPs offersthe possibility of greatly increasing service life. Also widely researchedand used in bridge engineering as a corrosion-resistant substitute for steelreinforcement is CFRP composite material. The use of carbon fiber-reinforcedplastic (CFRP) reinforcement for prestressing concrete …

A Review Article On The Performance Based Seismic Design Of Structures, Reem Hatem Ahmed, Sahar Elaiwi, Shelan Hameed Ameen

Al-Esraa University College Journal for Engineering Sciences

For the most part, seismic design builds complex structural systems using the same small number of essential structural components as non-seismic design projects. Based on the building regulations, structures are frequently designed to "withstand" the largest earthquake with a given likelihood that is projected to happen at their location. This means that by avoiding structures from collapsing, the number of fatalities must be maintained to a minimal. Seismic design involves knowing the many failure modes regarding a structure and giving it the right stiffness, strength, ductility, and layout for ensuring that these modes do not take place. In this essay, …

Evolution Of Glassy Carbon Derived From Pyrolysis Of Furan Resin, Josh Kemppainen, Ivan Gallegos, Aaron Krieg, Jacob R. Gissinger, Kristopher E. Wise, Margaret Kowalik, Julia A. King, S. Gowtham, Adri Van Duin, Gregory Odegard

Michigan Tech Publications

Glassy carbon (GC) material derived from pyrolyzed furan resin was modeled by using reactive molecular dynamics (MD) simulations. The MD polymerization simulation protocols to cure the furan resin precursor material are validated via comparison of the predicted density and Young's modulus with experimental values. The MD pyrolysis simulations protocols to pyrolyze the furan resin precursor is validated by comparison of calculated density, Young's modulus, carbon content, sp carbon content, the in-plane crystallite size, out-of-plane crystallite stacking height, and interplanar crystallite spacing with experimental results from the literature for furan resin derived GC. The modeling methodology established in this work can …

Cellulose Materials For Drug Delivery Applications, Reham Mohamed

Mechanical Engineering Theses

Non-healing wounds are a growing global public health concern due to inadequate or ineffective therapeutic products available. Cellulose-based biopolymers are attractive wound dressing materials due to their biocompatibility, biodegradability, non-toxicity, and cost-effectiveness. This study aims to design and fabricate solid dosage formulations using carboxymethyl cellulose (CMC) and ethyl cellulose (EC) to facilitate multi-stage releases of phenytoin (PHT) and tetracycline hydrochloride (TCH) from plain carriers, fibers/films composites, and layer-by-layer fiber composites. Results from in vitro drug release assays demonstrated a time-dependent release up to 8 hours from PHT-loaded EC fibers, while TCH-loaded CMC films exhibited a rapid release within 5 minutes. …

Designing A Cylindrical Capacitive Based Sensor For Monitoring The Table Salt’S Moisture Content During Iodization, Mwajuma Lungo

Tanzania Journal of Engineering and Technology (TJET)

Coaxial cylinder capacitive moisture sensor for determination of moisture content of table salts has been fabricated. The CMS method for determination of moisture content of table salts overcomes the effect of evaporation of iodine in table salt which results from heating in the oven drying method. The CMS overcomes the polarization effect result from the resistive methods of moisture content determination and it is non expensive to construct and it has high accuracy since measurements involves programming system in interpretation of the results. In this research, moisture content sensor based on capacitive principal created using two coaxial cylinders with height …

Challenges In Optimization For The Performance On Sustainability Dimensions In Reverse Logistics Social Responsibility, Sumarsono Sudarto, Katsuhiko Takahashi, Mochammad Dewo

Makara Journal of Technology

Reverse logistics social responsibility is preferred as the most acceptable solution for addressing the challenges in stakeholders’ debate regarding social responsibility in supply chains because it involves as many actors as possible in the supply chain to perform social responsibility to achieve sustainability. This paper explores the challenges in achieving optimal policies in sustainability dimensions for collection and recycling facilities in reverse logistics. Sustainability dimensions include economic, environmental, and social aspects. The reverse logistics is modeled on System Dynamics, and a simplified statistical analysis using a contour chart is employed in numerical experiments. Results show a narrow area of optimal …

Nanoscale Modeling Of Membrane Systems Under Mechanical Deformation In Traumatic Brain Injury Using Molecular Dynamics, Anh Thi Ngoc Vo

Theses and Dissertations

Neuronal membrane disruption and mechanoporation are nanoscale damage mechanisms that critically affect brain cell viability during traumatic brain injury (TBI). These nanoscale cellular impairments are elusive in experiments and necessitate in silico approaches such as molecular dynamics (MD) simulations. Implementing MD, this research aims to investigate the effects of different key factors related to membrane deformation and damage, including force field resolutions, lipid compositions, and loading conditions.

To examine the impact of force field resolution, MD deformation simulations were conducted on 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidylcholine (POPC) lipid bilayer membranes, using all-atom (AA), united-atom (UA), and coarse-grained Martini (CG-M) force fields. The mechanical responses …

Experimental And Numerical Investigation Of Fluid Flow Behavior Through Fractured Wellbore Cement, Mahya Hatambeigi

Civil Engineering ETDs

Leakage from wellbores has been a major challenge in the energy industry, leading to groundwater contamination, reduced productivity, safety hazards, and increased operating costs. Cemented annulus fractures are a common type of leakage pathway in wellbores that can form due to various physical and chemical conditions. The number of wellbore leaks continues to increase globally, making it imperative to develop a better understanding of the complex mechanisms governing fluid flow through fractured wellbore cement. Understanding the behavior of fluid flow through a leaky cemented annulus is crucial for evaluating the leakage potential and risk assessments in wellbore systems, as well …