Mechanical Engineering Commons^™

Analytical And Fea Analysis Of Silicon Micro-Machined Capacitive Pressure Sensor, Eoghan O'Donoghue

Theses

This thesis is concerned with the electro-mechanical characterisation of MEMS capacitive pressure sensors and the determination of models to describe their behaviour.

The finite element software package ANSYS is validated as a tool for the examination of the electro-mechanical behaviour of capacitive pressure sensors. It is then used to incorporate the effects of applied load, voltage and residual stress into a model of the sensor structure. The capacitive pressure sensor is modelled both in 3D and also in 2D axis-symmetric modes. The error between the 2D and 3D models is quantified.

The behaviour of structures under electrostatic actuation is investigated. …

Dec 2002, Tractor Museum

Lester F. Larsen Tractor Museum: Planning and Development Documents

Report from Director on Leave Development Projects Liason Report

Oct 2002, Tractor Museum

Lester F. Larsen Tractor Museum: Planning and Development Documents

Husker Harvest Days Fund Raising Interim Director

Apr 2002, Tractor Museum

Lester F. Larsen Tractor Museum: Planning and Development Documents

Potential Board Members Conservation Assessment Program Tractor Museum Calender

Jan 2002, Tractor Museum

Lester F. Larsen Tractor Museum: Planning and Development Documents

Newsletter Report Museum Open House 149 visitors

Effect Of Residual Thermal Stresses On Fracture Behavior And Mechanical Properties Of Al Sub 2 O Sub 3/Ni Cermets, Guo Jin Li, Da Ming Chen, Xiao Xian Huang, Jing Kun Guo

Faculty Publications

Effect of residual thermal stresses on fracture behavior and mechanical properties of Al₂O₃/Ni cermets was qualitatively explained by using theory on residual thermal stresses. When Ni particles are located within Al₂O₃ grains or Ni content is relatively low, tensile stresses are exerted at Al₂O₃-Al₂O₃ grain boundary. While fracturing, intergranular fracture is easily produced. When Ni particles are dispersed at Al₂O₃ grain boundary or Ni content is relatively high, compressive stresses are exerted at Al₂O₃-Al₂O₃grain boundary. …

Flow Patterns In A Two-Roll Mill, Christopher Hills

Articles

The two-dimensional flow of a Newtonian fluid in a rectangular box that contains two disjoint, independently-rotating, circular boundaries is studied. The flow field for this two-roll mill is determined numerically using a finite-difference scheme over a Cartesian grid with variable horizontal and vertical spacing to accommodate satisfactorily the circular boundaries. To make the streamfunction numerically determinate we insist that the pressure field is everywhere single-valued. The physical character, streamline topology and transitions of the flow are discussed for a range of geometries, rotation rates and Reynolds numbers in the underlying seven-parameter space. An account of a preliminary experimental study of …

Oct 2001, Tractor Museum

Lester F. Larsen Tractor Museum: Planning and Development Documents

Software Program Storage Space Needed 16 new members

Jul 2001, Tractor Museum

Lester F. Larsen Tractor Museum: Planning and Development Documents

UN Foundation Tractor Raffle Oliver Tractor Repair

Apr 2001, Tractor Museum

Lester F. Larsen Tractor Museum: Planning and Development Documents

Camp Creek Swap Meet Public Relations Get Fordson Running

Jan 2001, Tractor Museum

Lester F. Larsen Tractor Museum: Planning and Development Documents

New Personel Area rearrangement Missouri Valley Wrench Club

Finite Element Analysis And Active Control For Nonlinear Flutter Of Composite Panels Under Yawed Supersonic Flow, Khaled Abdel-Motagaly

Mechanical & Aerospace Engineering Theses & Dissertations

A coupled structural-electrical modal finite element formulation for composite panels with integrated piezoelectric sensors and actuators is presented for nonlinear panel flutter suppression under yawed supersonic flow. The first-order shear deformation theory for laminated composite plates, the von Karman nonlinear strain-displacement relations for large deflection response, the linear piezoelectricity constitutive relations, and the first-order piston theory of aerodynamics are employed. Nonlinear equations of motion are derived using the three-node triangular MIN3 plate element. Additional electrical degrees of freedom are introduced to model piezoelectric sensors and actuators. The system equations of motion are transformed and reduced to a set of nonlinear …

Eddy Structures Induced Within A Wedge By A Honing Circular Arc, C. P. Hills

Articles

In this paper we outline an expeditious numerical procedure to calculate the Stokes flow in a corner due to the rotation of a scraping circular boundary. The method is also applicable to other wedge geometries. We employ a collocation technique utilising a basis of eddy (similarity) functions introduced by Moffatt (1964) that allows us to satisfy automatically the governing equations for the streamfunction and all the boundary conditions on the surface of the wedge. The circular honing problem thereby becomes one-dimensional requiring only the satisfaction of conditions on the circular boundary. The advantage of using the Moffatt eddy functions as …

Eddies Induced In Cylindrical Containers By A Rotating End Wall, Christopher Hills

Articles

The flow generated in a viscous liquid contained in a cylindrical geometry by a rotating end wall is considered. Recent numerical and experimental work has established several distinct phases of the motion when fluid inertia plays a significant role. The current paper, however, establishes the nature of the flow in the thus far neglected low Reynolds number regime. Explicitly, by employing biorthogonality relations appropriate to the current geometry, it is shown that a sequence of exponentially decaying eddies extends outward from the rotating end wall. The cellular structure is a manifestation of the dominance of complex eigensolutions to the homogeneous …

Oct 2000, Tractor Museum

Lester F. Larsen Tractor Museum: Planning and Development Documents

Open House Pedestrian Door Installed Collection of Hand Tools

Jul 2000, Tractor Museum

Lester F. Larsen Tractor Museum: Planning and Development Documents

Midwest Tool Collectors Annual Meeting Camp Creek Thresher's Event North Door Replaced

Apr 2000

Lester F. Larsen Tractor Museum: Planning and Development Documents

State Museum Report Raffle Committee Book Sales Plans

Diffusion Problems In Wound Healing And A Scattering Approach To Immune System Interactions, Julia Suzanne Arnold

Mathematics & Statistics Theses & Dissertations

A theoretical model for the existence of a Critical Size Defect (CSD) in certain animals is the focus of the majority of this dissertation. Adam [1] recently developed a one-dimensional model of this phenomenon, and chapters I–V address the exist the CSD in a two-dimensional model and a three-dimensional model. The two dimensional (or 1-d circular) model is the more appropriate for a study of CSD's. In that model we assume a circular wound of uniform depth and develop a time-independent form of the diffusion equation relevant to the study of the CSD phenomenon. It transpires that the range of …

A Comparison Of Quasi-Static Indentation Testing To Low Velocity Impact Testing, Michael J. Douglas

Mechanical & Aerospace Engineering Theses & Dissertations

A static test method for modeling low-velocity foreign object impact events to composites would prove to be very beneficial to researchers since much more data can be obtained from a static test than from an impact test. In order to examine if this is feasible, a series of static indentation and low velocity impact tests were carried out and compared. Square specimens of many sizes and thicknesses were utilized to cover the array of types of low velocity impact events. Laminates with a rt/4 stacking sequence were employed since this is by far the most common type of engineering laminate. …

Feb 2000, Tractor Museum

Lester F. Larsen Tractor Museum: Planning and Development Documents

M.H. Pony Raffle Promotional Brochere Inventory and Displays

Jan 2000, Tractor Museum

Lester F. Larsen Tractor Museum: Planning and Development Documents

By-Law Amendments Nominations Potential New Signs

Rotary Honing: A Variant Of The Taylor Paint-Scraper Problem, Christopher Hills, H. Moffatt

Articles

The three-dimensional Row in a corner of fixed angle α induced by the rotation in its plane of one of the boundaries is considered. A local similarity solution valid in a neighbourhood of the centre of rotation is obtained and the streamlines are shown to be closed curves. The effects of inertia are considered and are shown to be significant in a small neighbourhood of the plane of symmetry of the flow. A simple experiment confirms that the streamlines are indeed nearly closed; their projections on planes normal to the line of intersection of the boundaries are precisely the 'Taylor' …

Matrix Structural Analysis, 2nd Edition, William Mcguire, Richard H. Gallagher, Ronald D. Ziemian

Faculty Books

The aims of the first edition of Matrix Structural Analysis were to place proper emphasis on the methods of matrix structural analysis used in practice and to lay the groundwork for more advanced subject matter. This extensively revised Second Edition accounts for changes in practice that have taken place in the intervening twenty years. It incorporates advances in the science and art of analysis that are suitable for application now, and will be of increasing importance in the years ahead. It is written to meet the needs of both the present and the coming generation of structural engineers.

KEY FEATURES …

Structural And Electrical Characterization Of A Novel Mixed Conductor: Ceo2 - Sm2O3 - Zro2 Solid Solution, W. Huang, P. Shuk, M. Greenblatt, M. Croft, Fanglin Chen, M. Liu

Faculty Publications

solid solutions were synthesized for the first time by the hydrothermal method. The electrical properties of the solid solutions have been studied in air and under reducing conditions. Solid solutions with the fluorite structure were formed in all of the studied range of substitution after calcination at 1500°C. With increasing substitution up to 30 mol %, the electronic conductivity increases under a reducing atmosphere. The solid solution has good mixed electronic and ionic conductivity; the total conductivity is 0.42 S/cm at and 700°C with an estimated ionic conductivity of ca. .

Application Of Vibrational Techniques In Determination Of Dynamic Properties Of Agricultural Products-State Of The Arton Of Vibrational Techniques In Determination Of Dynamic Properties Of Agricultural Products-State Of The Art, Silas Kajuna

Tanzania Journal of Engineering and Technology (TJET)

Vibration is one of the techniques employed in the determination of dynamic properties of fruits and vegetables. It entails generation of a mechanical or acoustic vibrational signal which is propagated through the flesh of the agricultural material. A transducer is either attached or held close to the specimen to monitor the propagation of the signal through the specimen. The manner in which the signal is transmitted through the material is analyzed, and the dynamic properties of the specimen which relate to its firmness or its internal being are derived. The technique has been around for the past 30 years or …

Suppression Of Post-Buckling Deflection And Panel-Flutter Using Shape Memory Alloy, Mohammad Tawfik Abo El So-Oud

Mechanical & Aerospace Engineering Theses & Dissertations

A novel concept proposed is the use of Shape Memory Alloy (SMA) to reduce the panel thermal deflection and flutter responses. SMA has unique ability to recover large prestrains completely when the alloy is heated (by aerodynamic heating in the present case) above the austenite start temperature A_s. During the recovery process, a large tensile recovery stress occurs if the SMA is restrained.

In this thesis, a panel subject to the combined aerodynamic and thermal loading is investigated. A nonlinear finite element model based on von Karman strain displacement relation is utilized to study the effectiveness of SMA …

Sept 1999, Tractor Museum

Lester F. Larsen Tractor Museum: Planning and Development Documents

Director's Report Curator's Report Friend's Letterhead and Logo

Triangulation Rangefinder And Sight Positioning System, Jeffrey Hargrove, William G. Wickham, John E. Briggs

Mechanical Engineering Patents

A rangefinder includes an angle sensitive transducer and a programmed data processor to calculate the distance to a target. In one embodiment, the rangefinder also includes a point-to-point measuring device. Another embodiment provides a linear actuator to selectively move a sight indicator vertically. A yet additional embodiment includes a liquid crystal display which displays information to the user.

Jun 1999, Tractor Museum

Lester F. Larsen Tractor Museum: Planning and Development Documents

Foundation Account Friends of NE State Museum Newsletter

Mar 1999, Tractor Museum

Lester F. Larsen Tractor Museum: Planning and Development Documents

Additional Funds Donation to Camp Creek Threshers Renovation Status