Open Access. Powered by Scholars. Published by Universities.®

Mechanical Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Aerospace Engineering

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 601 - 630 of 3234

Full-Text Articles in Mechanical Engineering

On The Development And Evaluation Of A Framework For Brain-Computer Interface And Vibrotactile Feedback For Human-Robot-Interaction In Virtual Spaces And Robotic Hardware, Sudip Hazra, Shane Whitaker, Panos S. Shiakolas Feb 2023

On The Development And Evaluation Of A Framework For Brain-Computer Interface And Vibrotactile Feedback For Human-Robot-Interaction In Virtual Spaces And Robotic Hardware, Sudip Hazra, Shane Whitaker, Panos S. Shiakolas

Mechanical and Aerospace Student Research - Archive

Research in Brain-Computer Interface (BCI) aims to understand human intent with the goal to enhance Human-Robot Interaction (HRI) especially in the field of assistive robotics. The goal of this research is to develop a behavioral sequence based framework to help persons with upper limb disabilities to maintain self-dependence. The framework aims to operate in stages and links multiple functional components to identify human intent and control a robotic arm. The development, operation, and evaluation of the framework and the linked functional components to acquire, process, evaluate, and map BCI signals generated using facial expressions and head movements to predefined actions …

Go to article

Selection Of Solidification Pathway In Rapid Solidification Processes, Nima Najafizadeh, Men G. Chu, Yijia Gu Feb 2023

Selection Of Solidification Pathway In Rapid Solidification Processes, Nima Najafizadeh, Men G. Chu, Yijia Gu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Rapid Solidification Processing of Alloys Enables the Formation of Exotic Nonequilibrium Microstructures. However, the Interrelationship between the Processing Parameters and the Resulting Microstructure is Yet to Be Fully Understood. in Melt Spinning (MS) and Additive Manufacturing (AM) of Rapidly Solidified Alloys, Opposite Microstructure Development Sequences Were Observed. a Fine-To-Coarse Microstructural Transition is Typically Observed in Melt-Spun Ribbons, Whereas Melt Pools in AM Exhibit a Coarse-To-Fine Transition. in This Paper, the Microstructural Evolutions during These Two Processes Are Investigated using Phase-Field Modeling. the Variation of All Key Variables of the Solid-Liquid Interface (Temperature, Composition, and Velocity) throughout the Entire Rapid Solidification …

Go to article

Glass-Based Biodegradable Pressure Sensor Toward Biomechanical Monitoring With A Controllable Lifetime, Devdatt Chattopadhyay, Jonghyun Park, Chang-Soo Kim Feb 2023

Glass-Based Biodegradable Pressure Sensor Toward Biomechanical Monitoring With A Controllable Lifetime, Devdatt Chattopadhyay, Jonghyun Park, Chang-Soo Kim

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A New Class of Potentially Implantable Solid-State Sensors is Demonstrated Utilizing Biodegradable Glass as the Main Structural Material. the Device Behavior is Manipulated Via Chemical Decomposition, and Then Physically Disintegrated in a Controlled Manner. It is based on the Capacitive Sensing Mechanism, Comprising an Elastic Insulator between Two Borate-Rich Glass Substrates. This Mesoscale Pressure Sensor is Characterized by a Range of Pressure of Up to 14 MPa in a Phosphate Buffer Solution Environment. the Sensor Exhibits Good Sensitivity and Reversibility Responding to Compressive Pressures and Remains Fully Functional Before a Desired, Sudden Failure Caused by Dissolution. the Operational Lifetime Can …

Go to article

Predicting Industrial Building Energy Consumption With Statistical And Machine-Learning Models Informed By Physical System Parameters, Sean Kapp, Jun-Ki Choi, Taehoon Hong Feb 2023

Predicting Industrial Building Energy Consumption With Statistical And Machine-Learning Models Informed By Physical System Parameters, Sean Kapp, Jun-Ki Choi, Taehoon Hong

Mechanical and Aerospace Engineering Faculty Publications

The industrial sector consumes about one-third of global energy, making them a frequent target for energy use reduction. Variation in energy usage is observed with weather conditions, as space conditioning needs to change seasonally, and with production, energy-using equipment is directly tied to production rate. Previous models were based on engineering analyses of equipment and relied on site-specific details. Others consisted of single -variable regressors that did not capture all contributions to energy consumption. New modeling techniques could be applied to rectify these weaknesses. Applying data from 45 different manufacturing plants obtained from industrial energy audits, a supervised machine-learning model …

Go to article

Synthesizing Ti–Ni Alloy Composite Coating On Ti–6al–4v Surface From Laser Surface Modification, Yitao Chen, Joseph William Newkirk, Frank W. Liou Feb 2023

Synthesizing Ti–Ni Alloy Composite Coating On Ti–6al–4v Surface From Laser Surface Modification, Yitao Chen, Joseph William Newkirk, Frank W. Liou

Materials Science and Engineering Faculty Research & Creative Works

In This Work, a Ni-Alloy Deloro-22 Was Laser-Deposited on a Ti–6Al–4V Bar Substrate with Multiple Sets of Laser Processing Parameters. the Purpose Was to Apply Laser Surface Modification to Synthesize Different Combinations of Ductile TiNi and Hard Ti2Ni Intermetallic Phases on the Surface of Ti–6Al–4V in Order to Obtain Adjustable Surface Properties. Scanning Electron Microscopy, Energy Dispersion Spectroscopy, and X-Ray Diffraction Were Applied to Reveal the Deposited Surface Microstructure and Phase. the Effect of Processing Parameters on the Resultant Compositions of TiNi and Ti2Ni Was Discussed. the Hardness of the Deposition Was Evaluated, and Comparisons with …

Go to article

Heat Transfer In Mini-Channel Heat Exchanger With Smooth And Pin-Fins Surfaces, Mohammed Molham Daadoua Feb 2023

Heat Transfer In Mini-Channel Heat Exchanger With Smooth And Pin-Fins Surfaces, Mohammed Molham Daadoua

Theses

This research aims to investigate heat transfer of single-phase and two-phase fluids in mini-channel heat exchanger with smooth and pin-fins surfaces. The main goal of the study is to develop a high-performance heat exchanger for thermal management in various processing applications. This research is carried out using computational fluid dynamics (CFD) modeling and experimentations. The proposed method is to use enhanced structured pin-fins surfaces in a mini-channel heat exchanger to improve heat transfer. The pin-fin microchannel heat exchanger is investigated using a CFD method with single-phase fluid (water, air). The experimental investigations are conducted using single-phase and two-phase fluid involving …

Go to article

Developing Test Methods For Compression After Lightning Strikes, Xiaodong Xu, Scott L. J. Millen, Juhyeong Lee, Gasser Abdelal, Daniel Mitchard, Michael R. Wisnom, Adrian Murphy Jan 2023

Developing Test Methods For Compression After Lightning Strikes, Xiaodong Xu, Scott L. J. Millen, Juhyeong Lee, Gasser Abdelal, Daniel Mitchard, Michael R. Wisnom, Adrian Murphy

Mechanical and Aerospace Engineering Faculty Publications

Research into residual strength after lightning strike is increasing within the literature. However, standard test methods for measuring residual compressive strength after lightning strikes do not exist. For the first time, a systematic experimental study is undertaken to evaluate modifications necessary to standard Compression After Impact (CAI) specimen geometry and test jig design to induce specimen failure at the lightning damage region. Four laboratory generated lightning strike currents with peak amplitudes ranging from 25 to 100 kA have been studied. Test set-up modifications were made considering the scale of the lightning damage and its potential proximity to specimen edges. Specimen …

Go to article

An Alternate Dimensionless Form Of The Linearized Rigid-Body Aircraft Equations Of Motion With Emphasis On Dynamic Parameters, Douglas F. Hunsaker, Benjamin C. Moulton Jan 2023

An Alternate Dimensionless Form Of The Linearized Rigid-Body Aircraft Equations Of Motion With Emphasis On Dynamic Parameters, Douglas F. Hunsaker, Benjamin C. Moulton

Mechanical and Aerospace Engineering Student Publications and Presentations

The equations of motion for an aircraft can be linearized about a reference condition within the assumptions of small disturbances and linear aerodynamics. The resulting system of equations is typically solved to obtain the eigenvalues and eigenvectors that describe the small disturbance motion of the aircraft. Results from such an analysis are often used to predict the rigid-body dynamic modes of the aircraft and associated handling qualities. This process is typically carried out in dimensional form in most text books, or in nondimensional form using dimensionless parameters rooted in aerodynamic theory. Here we apply Buckingham’s Pi theorem to obtain nondimensional …

Go to article

Nasa Student Launch - Payload, Eli Kirk Jan 2023

Nasa Student Launch - Payload, Eli Kirk

All Undergraduate Projects

A team of mechanical engineering, physics, and computer science students from Central Washington University have constructed a fully functional subscale model rocket to be flown at the NASA Student Launch competition. The rocket’s payload was designed to open the nose cone and take a photo of the rocket’s surroundings after descending from the launch. Smaller parts were constructed through machining and 3D printing that will be added to the purchased major component, the linear actuator, in order to perform the required tasks. These tasks are signaled by an attached electronics board, which will receive an RF command remotely, execute code, …

Go to article

Evaluation And Optimization Of Thermal Solutions In Air And Liquid Cooling Systems For Datacenters, Vibin Shalom Simon Jan 2023

Evaluation And Optimization Of Thermal Solutions In Air And Liquid Cooling Systems For Datacenters, Vibin Shalom Simon

Mechanical and Aerospace Engineering Dissertations - Archive

A data center is a specifically constructed establishment designed to accommodate computing, storage, and transmission equipment, thereby facilitating essential business operations spanning diverse sectors of the economy. This facility serves as the designated physical infrastructure for housing servers, networking components, and data storage systems. In the context of traditional data centers, a substantial portion of energy, specifically around 45% to 55%, is directed towards supporting information technology (IT) operations. Additionally, a considerable allocation, varying from 30% to 40%, is attributed to the facilitation of cooling processes. The scope of this dissertation study comprises nine distinct chapters, each contributing to addressing …

Go to article

Non-Intrusive Reduced Order Model Formulation For Inverse Shape Design Including Deforming Meshes And Multiphysics Problems., Kapil Aryal Jan 2023

Non-Intrusive Reduced Order Model Formulation For Inverse Shape Design Including Deforming Meshes And Multiphysics Problems., Kapil Aryal

Mechanical and Aerospace Engineering Dissertations - Archive

Despite significant advancements in computer capabilities for numerical simulations, engineers continue to face limitations when dealing with large-scale full-order model(FOM) simulations. These simulations often necessitate repeated solves, such as those encountered in inverse design, real-time solution prediction, error quantification, and solver convergence, among others. To address these challenges, reduced order modeling (ROM) has emerged as a valuable approach. This thesis focuses on the development of an ROM framework that combines Proper Orthogonal Decomposition (POD) with machine learning techniques. This integrated approach is applied to a diverse range of heat transfer and fluid flow inverse design problems. POD constructs optimal sets …

Go to article

Cooperative Manipulation And Formation Control Using Multiple Aerial Vehicles, Uluhan Cem Kaya Jan 2023

Cooperative Manipulation And Formation Control Using Multiple Aerial Vehicles, Uluhan Cem Kaya

Mechanical and Aerospace Engineering Dissertations - Archive

Recent advancements in autonomous systems have significantly impacted both academia and industry, opening new research avenues. One of them is the collaboration of multiple systems to achieve a common goal, which is known as a cooperative system. In the lack of human intelligence, decision making and perception capabilities, uncrewed autonomous systems could mutually benefit from each other’s capabilities when they are deployed and utilized together. This research tackles the collaboration of group of uncrewed aerial systems (UASs) where the constraint on individual vehicles requires a varying level of coordination and cooperation. Such cooperation can be in the form of a …

Go to article

Turbulent Shockwave/Boundary-Layer Interactions Generated By Sharp Swept Fins, Dustin Levi Otten Jan 2023

Turbulent Shockwave/Boundary-Layer Interactions Generated By Sharp Swept Fins, Dustin Levi Otten

Mechanical and Aerospace Engineering Dissertations - Archive

The shock/turbulent boundary layer interaction (STBLI) generated by a sharp fin with a 60 deg leading edge sweep mounted above a flat plate at Mach 2.5 was studied numerically. Incipient separation due to this highly swept fin was determined by varying the fin angle to the incoming freestream. The effect of a small fin/plate gap on STBLI incipient separation was established. Sweeping the fin increases the deflection required for incipient separation as the sweep reduces the interaction strength. A gap causes flow leakage under the fin, further reducing the interaction strength on the windward side. The incipient angle of attack …

Go to article

Experimental Study On Thermal Performance Of Metal Foam Heat Sinks In Single Phase Liquid Immersion Cooling, Manish Kumawat Jan 2023

Experimental Study On Thermal Performance Of Metal Foam Heat Sinks In Single Phase Liquid Immersion Cooling, Manish Kumawat

Mechanical and Aerospace Engineering Theses - Archive

In 1965, Intel co-founder Gordon Moore made the observation that the transistor counts on a chip double with a frequency of approximately every two years. This development resulted in more compact and potent ICs. However, the amount of heat produced on a chip increased proportionally with the number of transistors. Later, in the early 2000s, Dennard Scaling broke down. Transistors became so small that leakage currents (unwanted currents that flow within the transistor) emerged as a significant issue, and they contributed substantially to power consumption and heat generation. These tightly packed transistors produced heat, which decreased their performance and shortened …

Go to article

Jcati Carbon Fiber Recycler: Crusher System, Devin Riley Jan 2023

Jcati Carbon Fiber Recycler: Crusher System, Devin Riley

All Undergraduate Projects

With a substantial rise in Carbon Fiber use across all industries, the need for a way to recycle the waste has grown as well. A group of Mechanical Engineering Technology students at Central Washington University funded by the Joint Center for Aerospace Technology (JCATI) have created a machine to recycle waste wing trimmings from the Boeing company’s airplanes. This machine consists of 5 different sub-assemblies being the oven, crusher, gear train, conveyor, and shredder. The purpose of this project was to decrease the deflection in the crusher caused by bulging in the housing and movement of the bearings. To decrease …

Go to article

Method-Of-Characteristics Models For Flowfield Evaluation Of Hypervelocity Test Facilities, Ananthkumar Jayamani Jan 2023

Method-Of-Characteristics Models For Flowfield Evaluation Of Hypervelocity Test Facilities, Ananthkumar Jayamani

Mechanical and Aerospace Engineering Dissertations - Archive

Ground test facilities are an imperative part of the design and development of flying vehicles. In the case of high-enthalpy facilities, evaluating the gasdynamic and thermochemical state of the test gas poses challenges due to high temperature effects. This study aims to contribute to the development impulse facilities by developing reduced-order models resolving the flowfields of such facilities. Developed as a part of this study are various method-of-characteristics (MoC) algorithms which consider gases under varying levels of thermochemical complexity. The algorithms span from simple calorically perfect gases to full thermochemical nonequilibrium. The first set of algorithms was limited to unsteady …

Go to article

Microstructural Finite Element Modeling Of High-Performance Carbon Fiber-Reinforced Composites To Characterize Microscale Material Properties And Fiber-Direction Compressive Strength, Quy Tung Ling Vu Jan 2023

Microstructural Finite Element Modeling Of High-Performance Carbon Fiber-Reinforced Composites To Characterize Microscale Material Properties And Fiber-Direction Compressive Strength, Quy Tung Ling Vu

Mechanical and Aerospace Engineering Dissertations - Archive

Carbon fiber-reinforced composites are increasingly used in aerospace application thanks to their excellent specific stiffness and strength. However, incomplete understanding of their failure behaviors leads to composite components often being designed with a high Safety Factor, limiting their advantages. Using computational methods, this project studies carbon fiber-reinforced composite microstructures for the objective of understanding and improving material performances under compression load which is one of the main considerations in primary aerospace structure design. A Finite Element (FE) model for the evaluation of composite compression behaviors was developed, allowing the identification of several key material properties affecting composite performance. The numerical …

Go to article

Cooperative Rendezvous In Multi-Vehicle Systems, Rajeev Shobhit Voleti Jan 2023

Cooperative Rendezvous In Multi-Vehicle Systems, Rajeev Shobhit Voleti

Mechanical and Aerospace Engineering Dissertations - Archive

The field of cooperative, multi-vehicle systems has witnessed a significant expansion and evolution, yielding considerable opportunities for improved autonomy, resilience, and robustness. Despite these promising developments, complex challenges persist in ensuring secure and efficient rendezvous among cooperative peers. The term "rendezvous," within the realm of cooperative control, refers to the simultaneous convergence of multi-vehicle systems to a designated target location. In missile guidance, the problem of multiple pursuer missiles achieving rendezvous with a target is termed as a salvo attack. Current methodologies often grapple with issues related to synchronization, high latency and network security, all of which can adversely impact …

Go to article

A Rigid Body Framework For Modeling And Simulation Of Formation Of Autonomous Agents, Suguru Sato Jan 2023

A Rigid Body Framework For Modeling And Simulation Of Formation Of Autonomous Agents, Suguru Sato

Mechanical and Aerospace Engineering Theses - Archive

Formation motion, wherein multiple agents operate within close proximity while maintaining precise relative positions and coordinated movements has a significant impact in the realm of Uncrewed Aerial Systems (UAS). Formation establishment, and station-keeping have been critical research areas as several missions can be conceived, and accomplished by groups of “simple” autonomous agents. Advances in this research have led to multiple advantages in areas such as reconnaissance, aerospace exploration, map building, search and rescue, etc. particularly, if the formation motion is inspired by nature and natural phenomena such as flock of birds, school of fish, hydrodynamics (smooth streamlines), magnetic fields, and …

Go to article

3d-Printed Hydrogels Dressings With Bioactive Borate Glass For Continuous Hydration And Treatment Of Second-Degree Burns, Fateme Fayyazbakhsh, Michael J. Khayat, Candy Sadler, Delbert Day, Yue-Wern Huang, Ming-Chuan Leu Jan 2023

3d-Printed Hydrogels Dressings With Bioactive Borate Glass For Continuous Hydration And Treatment Of Second-Degree Burns, Fateme Fayyazbakhsh, Michael J. Khayat, Candy Sadler, Delbert Day, Yue-Wern Huang, Ming-Chuan Leu

Biological Sciences Faculty Research & Creative Works

Recent advances in additive manufacturing have led to the development of innovative solutions for tissue regeneration. Hydrogel materials have gained significant attention for burn wound treatment in clinical practice among various advanced dressings due to their soothing and moisturizing activity. However, prolonged healing, pain, and traumatic removal due to the lack of long-term wound hydration are some of the challenges in the treatment of second-degree burn wounds. In this study, 3D-printed dressings were fabricated using gelatin, alginate, and bioactive borate glass (BBG) using an extrusion-based bioprinter. After ionic crosslinking, the 3D-printed dressings were characterized for mechanical properties, degradation rate, hydration …

Go to article

Performance Evaluation Of Composite Sandwich Structures With Additively Manufactured Aluminum Honeycomb Cores With Increased Bonding Surface Area, M. Rangapuram, S. K. Dasari, Joseph William Newkirk, K. Chandrashekhara, H. Misak, P. R. Toivonen, D. Klenosky, T. Unruh, J. Sam Jan 2023

Performance Evaluation Of Composite Sandwich Structures With Additively Manufactured Aluminum Honeycomb Cores With Increased Bonding Surface Area, M. Rangapuram, S. K. Dasari, Joseph William Newkirk, K. Chandrashekhara, H. Misak, P. R. Toivonen, D. Klenosky, T. Unruh, J. Sam

Materials Science and Engineering Faculty Research & Creative Works

Modern aerostructures, including wings and fuselages, increasingly feature sandwich structures due to their high-energy absorption, low weight, and high flexural stiffness. The face sheet of these sandwich structures are typically thin composite laminates with interior honeycombs made of Nomex or aluminum. Standard cores are structurally efficient, but their design cannot be varied throughout the structure. With additive manufacturing (AM) technology, these core geometries can be altered to meet the design requirements that are not met in standard honeycomb cores. This study used a modified aluminum honeycomb core, with increased surface area on the top and bottom, as the core material …

Go to article

Mixed-Input Learning For Multi-Point Landing Guidance With Hazard Avoidance Part I: Offline Mission Planning Based On Multi-Stage Optimization, Chaoying Pei, Sixiong You, Ran Dai, Jeremy R. Rea Jan 2023

Mixed-Input Learning For Multi-Point Landing Guidance With Hazard Avoidance Part I: Offline Mission Planning Based On Multi-Stage Optimization, Chaoying Pei, Sixiong You, Ran Dai, Jeremy R. Rea

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper proposes a multi-stage optimization framework based on iterative second-order cone programming (SOCP) to solve the three-dimensional (3D) multi-point landing guidance (MLG) problem with hazard avoidance. The approach is used to generate the offline optimal trajectories for database construction in Part II of this paper, it aims to select a safe landing point while finding an optimal path to the selected landing point with minimum fuel consumption. First, by introducing binary variables associated with quadratic constraints, the MLG problem with hazard avoidance is equivalently reformulated as a quadratically constrained quadratic programming (QCQP) problem. Next, to solve the reformulated QCQP …

Go to article

Experimental Approach For Development Of A Powder Spreading Metric In Additive Manufacturing, M. Hossein Sehhat, Austin T. Sutton, Zane Yates, Ming-Chuan Leu Jan 2023

Experimental Approach For Development Of A Powder Spreading Metric In Additive Manufacturing, M. Hossein Sehhat, Austin T. Sutton, Zane Yates, Ming-Chuan Leu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The Powder Spreading is a Vital Step of Powder-Based Additive Manufacturing (AM) Processes. the Quality of Spread Powder Can Considerably Influence the Properties of Fabricated Parts. Poorly Packed Powder Beds with High Surface Roughness Result in Printed Part Layers with Large Porosity and Low Dimensional Accuracy, Leading to Poor Mechanical Properties. Therefore, the Powder Spread ability and its Dependence on Process Parameters and Powder Characteristics Should Be Quantified to Improve the Efficiency of Powder-Based AM Methods. This Study Proposes a Novel Dimensionless Powder Spread Ability Metric that Can Be Commonly Used in Different Powder-Based AM Processes. the Quality of Spread …

Go to article

An Insight Into The Effect Of Sharp And Round Edges On The Flow Field-A Cfd Simulation, Abid Hussain, Gao Puzhen, M. Mustafa Azeem, Muhammad Zubair, Muhammad Aamir, Muhammad Irfan Khaleed Jan 2023

An Insight Into The Effect Of Sharp And Round Edges On The Flow Field-A Cfd Simulation, Abid Hussain, Gao Puzhen, M. Mustafa Azeem, Muhammad Zubair, Muhammad Aamir, Muhammad Irfan Khaleed

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This paper presents a numerical investigation of pressure drop and distribution in a channel around a sharp edge and a disc that is connected to the base of a circular rod. We have employed computational fluid dynamics (CFD)-Fluent for the validation of our models. It was found that the edge sharpness of the disc influences the pressure drop., i.e. sharp edge has higher turbulence and pressure drop. We also observed that pressure drops in the case of the circular disc are less than that of the sharp edge. However, pressure drop has essentially the same values for both shapes after …

Go to article

Topologically Optimized Electrodes For Electroosmotic Actuation, Jianwen Sun, Jianyu Zhang, Ce Guan, Teng Zhou, Shizhi Qian, Yongbo Deng Jan 2023

Topologically Optimized Electrodes For Electroosmotic Actuation, Jianwen Sun, Jianyu Zhang, Ce Guan, Teng Zhou, Shizhi Qian, Yongbo Deng

Mechanical & Aerospace Engineering Faculty Publications

Electroosmosis is one of the most used actuation mechanisms for the microfluidics in the current active lab-on-chip devices. It is generated on the induced charged microchannel walls in contact with an electrolyte solution. Electrode distribution plays the key role on providing the external electric field for electroosmosis, and determines the performance of electroosmotic microfluidics. Therefore, this paper proposes a topology optimization approach for the electrodes of electroosmotic microfluidics, where the electrode layout on the microchannel wall can be determined to achieve designer desired microfluidic performance. This topology optimization is carried out by implementing the interpolation of electric insulation and electric …

Go to article

Nonprehensile Manipulation Of A Stick Using Impulsive Forces, Aakash Khandelwal, Nilay Kant, Ranjan Mukherjee Jan 2023

Nonprehensile Manipulation Of A Stick Using Impulsive Forces, Aakash Khandelwal, Nilay Kant, Ranjan Mukherjee

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The problem of nonprehensile manipulation of a stick in three-dimensional space using intermittent impulsive forces is considered. The objective is to juggle the stick between a sequence of configurations that are rotationally symmetric about the vertical axis. The dynamics of the stick is described by five generalized coordinates and three control inputs. Between two consecutive configurations where impulsive inputs are applied, the dynamics is conveniently represented by a Poincaré map in the reference frame of the juggler. Stabilization of the orbit associated with a desired juggling motion is accomplished by stabilizing a fixed point on the Poincaré map. The Impulse …

Go to article

Nucleotide Detection Mechanism And Comparison Based On Low-Dimensional Materials: A Review, M. Mustafa Azeem, Muhammad Shafa, Muhammad Aamir, Muhammad Zubair, Basma Souayeh, Mir Waqas Alam Jan 2023

Nucleotide Detection Mechanism And Comparison Based On Low-Dimensional Materials: A Review, M. Mustafa Azeem, Muhammad Shafa, Muhammad Aamir, Muhammad Zubair, Basma Souayeh, Mir Waqas Alam

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The recent pandemic has led to the fabrication of new nucleic acid sensors that can detect infinitesimal limits immediately and effectively. Therefore, various techniques have been demonstrated using low-dimensional materials that exhibit ultrahigh detection and accuracy. Numerous detection approaches have been reported, and new methods for impulse sensing are being explored. All ongoing research converges at one unique point, that is, an impetus: the enhanced limit of detection of sensors. There are several reviews on the detection of viruses and other proteins related to disease control point of care; however, to the best of our knowledge, none summarizes the various …

Go to article

Initial Procedure For Small-Scale Extraction Of Subsurface Martian Ice, Evan Steers Jan 2023

Initial Procedure For Small-Scale Extraction Of Subsurface Martian Ice, Evan Steers

Electronic Theses and Dissertations

For decades, NASA has been surveying the surface of Mars with plans for human exploration. Due to recent advancements, there is strong evidence to believe that frozen aquifers beneath the Martian surface hold great amounts of usable H2O. Since the discovery of water on Mars, NASA has expressed key interest in harvesting this valuable resource. The presence of usable H2O on Mars could reduce the launching mass of future missions by giving astronauts the capability to harvest water once they have landed on Mars. This research focuses on the optimization of a current design to extract Martian water and the …

Go to article

Efficacy, Durability And Design Of A Bucket Wheel Excavator For Icy Lunar Regolith, Austin Lohsandt Jan 2023

Efficacy, Durability And Design Of A Bucket Wheel Excavator For Icy Lunar Regolith, Austin Lohsandt

Electronic Theses and Dissertations

This research project focused on the design and testing of a prototype bucket wheel excavator developed for NASA's Break the Ice Lunar Challenge, which sought innovative ideas for lunar excavation. Several attempts have been made by other universities and private industries to create systems that can successfully excavate simulated frozen regolith, however, few have been successful. The chosen excavation technology employed a bucket wheel concept inspired by large open-pit mining machines, modified to incorporate grinding nubs for pulverizing lunar simulant material. The goals included proving the viability of a bucket wheel excavator for lunar excavation, exploring grinding nubs, conducting durability …

Go to article

Additively Manufactured Carbon Fiber- Reinforced Thermoplastic Composite Mold Plates For Injection Molding Process, C. Bivens, A. Wood, D. Ruble, M. Rangapuram, S. K. Dasari, K. Chandrashekhara, J. Degrange Jan 2023

Additively Manufactured Carbon Fiber- Reinforced Thermoplastic Composite Mold Plates For Injection Molding Process, C. Bivens, A. Wood, D. Ruble, M. Rangapuram, S. K. Dasari, K. Chandrashekhara, J. Degrange

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Polymer injection molding processes have been used to create high-volume parts quickly and efficiently. Injection molding uses mold plates that are traditionally made of very hard tool steels, such as P20 steel, which is extremely heavy and has very long lead times to build new molds. In this study, composite-based additive manufacturing (CBAM) was used to create mold plates using long-fiber carbon fiber and polyether ether ketone (PEEK). These mold plates were installed in an injection molding machine, and rectangular flat plates were produced using Lustran 348 acrylonitrile butadiene styrene (ABS). Tensile and flexural testing was performed on these parts …

Go to article

First Prev Next Last