Mechanical Engineering Commons^™

Improvement Of Convective Drying Equipment, A Ponasenko, Jasur Safarov, Shaxnoza Sultanova

Technical science and innovation

Drying of agricultural raw materials is an energy-consuming but integral process. Therefore, increasing the efficiency of drying and improving the quality indicators of dried material at minimum material and energy costs is relevant for producers of agricultural products. By present time numerous researches on improvement of constructions and processes of work of dryers providing satisfactory parameters of energy saving have been carried out. In some scientific materials it is shown that the use of generative gas and straw as fuel allows to reduce energy costs for the drying process in the fluidised bed dryer by 10-30%, the quality of seeds …

Existing Methods For Monitoring Power Autotransformers, Nurali Berdiyorovich Pyrmatov, Dilafruz Rustamjon Qizi Abdullabekova

Technical science and innovation

autotransformers, methods, diagnostics, efficiency, monitoring.Particular attention is given to analyzing the gas composition of transformer oil, which is a sensitive indicator of various defects such as thermal breakdown and heating. In addition, methods based on the measurement of external magnetic field strength are discussed. This technique provides a unique opportunity to detect magnetic anomalies associated with possible defects in the structural components of the transformer. The article emphasizes that successful monitoring requires an integrated approach, combining different techniques. The authors analyze the advantages and limitations of each method and offer practical recommendations for integrating these methods into maintenance systems. In …

Mathematical Modeling Of Fruit Drying And System Analysis Of The Process (On The Example Of Persimmon), Gani Dadayev, Jasur Safarov, Shakhnoza Sultanova, Qobiljon Muxiddinov

Technical science and innovation

Vegetable raw materials, as an object of drying, are characterized by a large amount of water and a low content of dry substances. Vegetable raw materials have a capillary-porous structure. Food products contain both bound and free moisture at the same time. The removal of moisture from the material during drying depends on the total moisture content and the form of connection of moisture with the material. Adsorption and osmotic - bound moisture is retained at the interface of colloidal particles with the environment. Food products contain both bound and free moisture at the same time. The quantitative ratio between …

Capacitive Electrode Based Moisture Measurement Converter Errors And How To Eliminate Them, Hamdam Jabborov, Temurbek Rashidov

Technical science and innovation

The article discusses the errors associated with the moisture measuring transducer that is based on the cylindrical electrode, along with their sources and calculation formulas for error elimination. The initial capacitance of the capacitive electrode humidity converter is dependent on its geometric parameters, such as the radii of the electrodes and their length. Accurate calculation of these geometric parameters enables the reduction of regular measurement errors in the input and switching circuit of the moisture converter to a minimum value, resulting in a significant increase in the informativeness and accuracy of the output signal. Consequently, some sources of measurement errors …

Influence Of Foil Stamping Parameters On Image Quality, Khalima Abishevna Babakhanova, Mukhlisa Ergashevna Khasanova, Aziz Azimjonovich Soadatov, Nigora Junaydullaevna Sadriddinova

Technical science and innovation

The paper evaluates the influence of technological process parameters, namely die temperature and pressure force, on the quality of foil stamping, which is one of the types of finishing having a wide range of applications due to giving unique decorative and protective elements to printed products. When evaluating the influence of process parameters on the linearity and coverability of the image, it was found that the pressure force has less influence on the result than the temperature. According to the data of the study, it can be concluded that the maximum percentage of completeness of covering is achieved at a …

Experimental Environmental Profiles And Sloshing Dynamics Aboard Zero-G Aircraft, Pedro J. Llanos, Sathya Gangadharan, Kevin Crosby

Publications

This study presents the results of a parabolic flight experiment to study the sloshing dynamics of the magneto-active propellant management device experiment. This device utilizes a magnetoactive membrane and magnets located external to the tank to effectively damp the liquid free surface motion. This research work establishes a benchmark with sloshing analytical formulation and sensor calibration methods that can be used to characterize future research parabolic flights while providing important environmental profiles measured during flight, such as accelerations, pitch angle, velocity, temperature, total volatile content, carbon dioxide, relative humidity, magnetic field, and radiation. Correlation between these flight variables and the …

Deep Learning Based Optical Flow Analysis Of High-Speed Flows, Daniel H. Zhang, Zifeng Yang

Mechanical and Materials Engineering Faculty Publications

Two-dimensional Rayleigh scattering imaging is utilized to quantify the high-speed flow velocity by employing deep learning based optical flow analysis, along with density fields from Rayleigh scattering intensity profiles.

Kissing Bond Assessment In Adhesive Bonded Carbon Fiber Reinforced Composites Using Dielectric Spectroscopy, Minhazur Rahman

Mechanical and Aerospace Engineering Dissertations - Archive

The widespread use of fiber-reinforced composites in industries such as space, aviation, automobiles, and construction necessitates the formation of robust composite joints between critical structural components. Although adhesive-bonded joints are superior with improved load distribution and reduced weight, they are often overlooked in favor of bolted joints and mechanical fasteners due to the lack of reliable Non-Destructive Evaluation (NDE) techniques for adhesive-bonded composites. The anisotropic nature of the substrate and the intricate interfacial interactions between the adherend and adhesive material present significant challenges for conventional NDE methods. Moreover, weak adhesive bonds can result from uncontrolled manufacturing parameters, such as accidental …

Two-Phase Flow Simulations With Plic-Vof Method And Dynamic Mesh Refinement, Vimalan Adaikalanathan

Mechanical and Aerospace Engineering Dissertations - Archive

Two-phase flows are critical in a variety of engineering applications that span multiple length scales. These applications encompass macroscopic phenomena, such as dam breakage and wave-structure interactions, as well as microscopic events, including droplet impacts and boiling, and mixed-scale issues like spray dynamics. Accurate representation of evolving interfaces is essential for numerical simulations of these problems, and the Volume of Fluid (VOF) method combined with the Piecewise Linear Interface Calculation (PLIC) approach is employed to fulfill this requirement. To tackle the computational challenges associated with high-resolution meshes in deforming two-phase flows, Adaptive Mesh Refinement (AMR) is utilized to enhance mesh …

Experimental Investigations And Optimization Of 3d Printed Cellular Structures For Protection Against Traumatic Brain Injury, Aaron R. Jackson

Mechanical and Aerospace Engineering Dissertations - Archive

Traumatic Brain Injury (TBI) disrupts brain function due to head impacts, blast exposures, and ballistic penetrations. It is a significant cause of mental health issues and disability, particularly among military personnel. Historically, combat helmets were designed primarily to protect against fragments. However, recent data highlights the need for helmets that also protect against blast and blunt impacts. Effective TBI prevention requires helmets that address various energy threats while remaining lightweight. A critical metric in this effort is head acceleration, which is closely linked to injury across different scales of brain damage.

Four lattice structures were 3D printed using Digital ABS …

Development Of A 3d Printed Optimization-Driven Aeroelastically Scaled Wind Tunnel Model For High Aspect Ratio Flying Wings, Mikaela K. Leevy

Mechanical and Aerospace Engineering Theses - Archive

Design optimization coupled with 3D printing and parametric CAD offers a unique approach to investigating flutter phenomena by creating low-cost iterative aeroelastic wind tunnel models. Recently, there is an interest in studying flutter phenomena at low air speeds in flying wing configurations. The X-56 experimental flying wing was designed to investigate flutter phenomena and flutter suppression, which makes the X-56 a logical choice for the full-scale model. The goal of this work is to optimize, physically print, and geometrically characterize a scaled aeroelastic wind tunnel model. The 18% reduced scale X-56 model was optimized by matching the mode shapes to …

Nonlinear Guidance And Control Of Unmanned Aerial Manipulators For Delivering A Payload On A Moving Platform, Ravi Gyawali

Mechanical and Aerospace Engineering Theses - Archive

Unmanned Aerial manipulators (UAMs) are a class of Unmanned Aerial Vehicles (UAVs) equipped with a manipulator. By combining the aerial mobility of a UAV with a manipulator's dexterity, these hybrid systems can perform a wide range of complex tasks while reducing risks and costs. As a result, they are increasingly being utilized for military, industrial, and agricultural applications.

The thesis presents a novel approach for a multi-UAM system to collaboratively deliver a payload on a stationary or maneuvering platform. A sliding-mode-based guidance law, sourced from existing literature, is integrated with a combined control technique for the UAVs and their respective …

Dynamics Of Separated Flows In Diffusers With Vortex Generators, Sandeep Eldho James

Mechanical and Aerospace Engineering Dissertations - Archive

Flow through curved diffusers is complicated due to the possibility of flow separation and secondary flows. Vortex generators (VGs) are a class of passive flow separation control devices used to improve the flow quality in curved diffusers by suppressing flow separation. However, the literature review demands an in-depth investigation on the physical mechanisms related to flow separation control. Thus, this study aims to improve the understanding of the underlying flow physics associated with VG-induced flow separation control in confined flows. The chosen geometry for this study is a well-documented asymmetric diffuser which exhibits a mild flow separation.

The theoretical formulation …

Generating Blood Analog For Laser Induced Fluorescent Particle Image Velocimetry, Chungyiu Ma, Jared Chong, Hang Yi, Zifeng Yang, Luke Bramlage, Bryan Ludwig

Mechanical and Materials Engineering Faculty Publications

To mimic blood non-Newtonian viscosity features under designated temperatures from 305 to 315 K, transparent blood analogs were generated by the mixture of xanthan gum and deionized water with fluorescent particles for laser induced fluorescent particle image velocimetry.

Graphene Reinforced Polymer Composite For Small-Scale Vertical Axis Wind Turbine Rotors, Kunal A. Bachim

Mechanical and Aerospace Engineering Theses - Archive

Polymers have evolved as an indispensable asset in various sectors ranging from packaging and construction to energy and aerospace. However, the accumulation of polymer waste poses a necessity to shift toward sustainable waste management processes. Mechanical recycling is a primary method in establishing a circular economy approach for polymers. However, a fundamental challenge arises in this process: a decrease in the mechanical performance of the recycled product compared to that of its pristine counterpart.

This project addresses the challenge of enhancing the recyclability of polyethylene terephthalate (PET) from discarded polymer material by incorporating graphene nanoparticles into the polymer matrix during …

A Review Of Dielectric Barrier Discharge Cold Atmospheric Plasma For Surface Sterilization And Decontamination, Kolawole Adesina, Ta Chun Lin, Yue-Wern Huang, Marek Locmelis, Daoru Frank Han

Biological Sciences Faculty Research & Creative Works

Numerous investigations have shown that non-equilibrium discharges at atmospheric pressure, also known as "cold atmospheric plasma" (CAP) are efficient to remove biological contaminants from surfaces of a variety of materials. Recently, CAP has quickly advanced as a technique for microbial cleaning, wound healing, and cancer therapy due to the chemical and biologically active radicals it produces, known collectively as reactive oxygen and nitrogen species (RONS). This article reviews studies pertaining to one of the atmospheric plasma sources known as Dielectric Barrier Discharge (DBD) which has been widely used to treat materials with microbes for sterilization, disinfection, and decontamination purposes. To …

3d Flow Field Quantification In An Artery Model Using Optical Flow Method Based On Simulated Multi-Angle Angiography, Zifeng Yang, Hang Yi, Luke Bramlage, Bryan Ludwig

Mechanical and Materials Engineering Faculty Publications

3D flow field in a numerically simulated arterial model is quantified using the three-dimensional optical flow method based on simulated simultaneous multi-angle X-ray angiography of the blood flow with contrast agent perfusions.

A Pade-Eno Flux Reconstruction For High-Speed Flows, Blake Martin

Browse all Theses and Dissertations

The development of high order numerical schemes has been instrumental in advancing computational fluid dynamics (CFD), particularly for applications requiring high resolution of discontinuities and complex flow phenomena prevalent in high-speed flows. This thesis introduces the Pade-ENO scheme, a high-order method that integrates Essentially Non-Oscillatory (ENO) techniques with compact Pade stencils to achieve superior accuracy, up to 7th order, while maintaining stability in harsh environments. The scheme’s performance is evaluated through benchmark tests, including the advection equation, Burgers’ equation, and the Euler equations. For high Mach number flows, such as the sod shock tube the Pade-ENO method demonstrates its ability …

A Concept Of Producing Aluminum In-Situ On The Moon Through Molten Salt Electrolysis, Jacob N. Ortega, Jeffrey Smith, Fateme Rezaei, David Bayless, William Schonberg, Daniel Stutts, Daoru Han

Materials Science and Engineering Faculty Research & Creative Works

This paper presents a concept of producing aluminum in-situ on the lunar surface, namely, the Lunar In-Situ Aluminum Production through Molten Salt Electrolysis (LISAP-MSE) method developed at Missouri University of Science and Technology. This paper aims to demonstrate the use of electro-deoxidation to reduce aluminum oxide (i.e., alumina) into aluminum and oxygen gas via electrolysis in a molten salt bath for the production of aluminum on the Moon. It is shown that with a steady supply of hydrogen chloride, this in-situ resource utilization (ISRU) method could supply several necessary materials consumed in the electro-deoxidation process except hydrogen chloride to produce …

Magnetic Separation Of Lunar Regolith Simulants With Applications To In Situ Resource Utilization On The Moon, Peter Bachle, Jeffrey Smith, Fateme Rezaei, David Bayless, William Schonberg, Daoru Han

Chemical and Biochemical Engineering Faculty Research & Creative Works

The development of in situ resource utilization (ISRU) for metal extraction is imperative as a steppingstone for habitation construction in lunar and non-terrestrial environments. Separation of minerals by chemical composition is important to optimize metal and oxygen liberation from lunar ore. To this effect, devices capable of separating aluminum bearing minerals from iron-bearing minerals from the lunar regolith simulants have been developed. Twenty-eight different simulants have been used in this study. A dual-belt separator was designed to reduce middling. Para-magnetic minerals were reliably separated using a neodymium N52-magnet-separator system. Effective separation of aluminum-bearing minerals from iron-bearing minerals was greater than …

Phenolic Polymer Infiltration And Pyrolysis Process For Additively Manufactured Carbon/Peek Composites To Produce Carbon–Carbon Composites, S. Weiler, H. A. Haffner, K. Chandrashekhara, J. Watts, G. E. Hilmas, J. Bayldon, L. M. Rueschhoff

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Carbon–carbon composites are carbon fibers reinforced with carbon matrix and are classified as advanced materials well suited for high-temperature structural applications. Carbon–carbon composites are characterized by maintaining excellent mechanical properties and structural stability at high temperatures and have been used in aerospace application as nozzles, heatshields, and leading edge. However, conventional methods to manufacture carbon–carbon composites are costly and time-consuming. the aim of this work is to develop a method for creating additively manufactured (AM) carbon–carbon composites using a high-pressure re-infiltration process. in doing so, less infiltration cycles are required compared to a low-pressure re-infiltration, reducing the total manufacture time. …

Modeling Human Strategy For Flattening Wrinkled Cloth Using Neural Networks, Nilay Kant, Ashrut Aryal, Rajiv Ranganathan, Ranjan Mukherjee, Charles Owen

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper explores a novel approach to model strategies for flattening wrinkled cloth learning from humans. A human participant study was conducted where the participants were presented with various wrinkle types and tasked with flattening the cloth using the fewest actions possible. A camera and Aruco marker were used to capture images of the cloth and finger movements, respectively. The human strategies for flattening the cloth were modeled using a supervised regression neural network, where the cloth images served as input and the human actions as output. Before training the neural network, a series of image processing techniques were applied, …

New Testing Capabilities Of The Missouri University Of Science And Technology Supersonic Wind Tunnel, Joshua Gary, Davide Viganò

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The development of non-intrusive, laser-based diagnostic techniques has significantly enhanced supersonic experimental aerodynamics, enabling the measurement of many parameters in complex flow fields. Among these techniques, Tomographic Particle Image Velocimetry, capable of measuring 3 components of velocity in 3-dimensional volumes, is now available at the Aerodynamics Research Laboratory of the Missouri University of Science and Technology. To integrate this new system into the university's supersonic wind tunnel, a redesigned nozzle, test section, and diffuser have been implemented. The upgraded modular test section features 4 large ports which can be configured with windows for optical diagnostics or lead plates for model …

Sensor Tasking For Low Earth Orbit Objects: Leveraging Space Sensor Data For Ground-Based Optical Observations, Smriti Nandan Paul, Hang Woon Lee

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Because of recent advancements in space technologies, easier and more economical access to space, and an increase in commercial interests, the near-Earth space environment has witnessed an exploding number of objects being put into orbit. In particular, the low Earth orbit (LEO) region is at an increased risk of orbital collisions from large satellite constellation projects. Thus, monitoring LEO objects for space situational awareness and space traffic management has become increasingly imperative. In this paper, we use the concept of limited-CDF (cumulative distribution function) surface and mutual information for designing sensor tasking algorithms focusing on regular observation of known catalog …

Sensor Tasking Strategies For Space-Based Observers In The Cislunar Environment, Smriti Nandan Paul, Roshan Thomas Eapen, Puneet Singla

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The cislunar space environment has witnessed an increase in activities, and future projections indicate significant growth in object population. Consequently, it becomes crucial to monitor these objects for space domain awareness (SDA) purposes. As the number of objects surpasses the available observers, meticulous sensor tasking becomes essential. This paper focuses on designing and exploring strategies for observing and keeping custody of known objects in cislunar space. Optical space-based telescopes, combined with lunar ground-based telescope, are employed for sensor tasking of cislunar objects residing in valuable orbits. The proposed research aims to address the following key points: (1) examination of the …

Damage Initiation Of 15v38 Steel Bar During Square-To-Round Hot Rolling Process, Siva Sai Krishna Dasari, Henry Adekola Haffner, K. Chandrashekhara, Mario F. Buchley, Simon N. Lekakh, Ronald J. O'Malley

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Hot rolling processes have been extensively used to produce round bars by reducing the cross-sectional area of continuously cast steel. The current trend toward increasing productivity often requires a more aggressive reduction per pass. Establishing safe and optimized hot rolling parameters must be determined to avoid damage while deforming the specific steel composition. Understanding the damage mechanism during the metal forming process is vital for product quality. Herein, a combined experimental and simulation approach is developed to track the evolution potential damage during hot bar rolling. Hot tension tests are conducted on as-cast vanadium micro alloyed 15V38 steel at different …

L∞ Bounds For Transient Growth In Repetitive And Iterative Learning Control Systems, Douglas A. Bristow, John R. Singler

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper revisits the problem of large transient growth in Iterative Learning Control (ILC) and Repetitive Process Control (RPC) systems. In ILC and RPC problems a process is repeated iteratively, with new control calculations occurring in between each iteration. Large transient growth refers to the propensity of some control algorithms to grow error exponentially before eventually converging. While robust monotonic convergence algorithms (in which monotonic convergence is guaranteed usually in exchange for a small loss in performance) have largely eliminated the concern for large transient growth in ILC, similar results cannot always be obtained in RPC. The emergence of additive …

Electrostatic Sorting Of Lunar Regolith Simulants For Sustainable Resource Utilization: Modeling And Characterization Of Particle Size Distribution, Abdullah Al Moinee, Peter Bachle, Kyle Newport, William Schonberg, David Bayless, Jeffrey Smith, Daoru Han, Fateme Rezaei

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In pursuit of sustainable resource utilization on the Moon, this paper delves into modeling and characterization of particle size distribution (PSD) of lunar regolith simulants in an electrostatic system. A prototype electrostatic sieve was built and tested with four sample simulants mirroring properties of lunar mare and highland regolith. An alternating four-phase (90 degrees, 180 degrees, 270 degrees, 360 degrees) traveling square-wave was utilized for particle-directed transport to model the diverse trajectories of the particles. Numerically, we scrutinized how the distribution functions of the particles are manifested as the electrostatic field propagates, with a focus on three distinct particle ranges …

Modelling Of The Viscoelastic Relaxation Of A Stowed Telescope Starshade, Rahul Raghu

Graduate Thesis and Dissertation 2023-2024

The Habitable Worlds Telescope Starshade is an occulting disk that orbits in tandem with a telescope that occludes and diffuses the light from stars to observe the relatively dim exoplanets in orbit around them. It achieves this in part with tailored petals that diffuse light to soften the light from the star. Due to the relative sizes of the star and the planet, NASA considers the shape stability of the Starshade's petals to be a Key Technology Gap. The Starshade is developed to be a deployable composite structure that folds on itself to fit within modern rockets. Due to the …

Mechanics Of Pure Bending And Eccentric Buckling In High-Strain Composite Structures, Jimesh D. Bhagatji, Oleksandr G. Kravchenko, Sharanabasaweshwara Asundi

Mechanical & Aerospace Engineering Faculty Publications

To maximize the capabilities of nano- and micro-class satellites, which are limited by their size, weight, and power, advancements in deployable mechanisms with a high deployable surface area to packaging volume ratio are necessary. Without progress in understanding the mechanics of high-strain materials and structures, the development of compact deployable mechanisms for this class of satellites would be difficult. This paper presents fabrication, experimental testing, and progressive failure modeling to study the deformation of an ultra-thin composite beam. The research study examines the deformation modes of a post-deployed boom under repetitive pure bending loads using a four-point bending setup and …