Open Access. Powered by Scholars. Published by Universities.®

Mechanical Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Aerospace Engineering

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 1291 - 1320 of 3234

Full-Text Articles in Mechanical Engineering

Shape-Stabilization Of Pcm/Hdpe Composites With 3d-Printing Applications For Battery Thermal Management, Thomas Benjamin Freeman Dec 2018

Shape-Stabilization Of Pcm/Hdpe Composites With 3d-Printing Applications For Battery Thermal Management, Thomas Benjamin Freeman

Doctoral Dissertations and Master's Theses

Phase-change materials (PCMs) are a useful alternative to more traditional methods of thermal management of Li-ion batteries in electric or hybrid-electric vehicles. PCMs are materials which absorb large amounts of latent heat and undergo solid-to-liquid phase change at near-constant temperature. The goal of this thesis is to experimentally investigate the thermal properties of a novel shape-stabilized PCM/HDPE composite extruded filament. The extruded filament can then be used in a 3D printer for custom PCM/HDPE shapes. These custom PCM/HDPE shapes can be used to help reduce weight, energy consumption, and complexity of the thermal management of the ESS. The PCM used …

Go to article

Inter-Laminar Fracture Of 3d-Printed Plastics - Development Of Methods, Christopher Stolinski Dec 2018

Inter-Laminar Fracture Of 3d-Printed Plastics - Development Of Methods, Christopher Stolinski

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Due to the increased use of 3D printed acrylonitrile butadiene styrene (ABS) plastic parts, a way to quantify the failure energy (energy needed to initiate cracking) is needed. Impact tests at high rates of loading are performed to determine failure energy. Throughout testing, specimens are monitored with high speed cameras to perform camera-based deformation measurements. Data acquisition and processing methods to calculate failure energy using crack opening displacement, and loading rates are developed to enable further use by Dr. Ryan Berke’s lab at Utah State University.

Go to article

Hybrid Processes In Material Removal Of Hard And Brittle Materials, Hossein Mohammadi Dec 2018

Hybrid Processes In Material Removal Of Hard And Brittle Materials, Hossein Mohammadi

Dissertations

New technologies demand new materials with better mechanical, optical, and thermal properties. Materials that are light weight, strong with high resistance to high temperatures, and compatible with a predetermined condition. Such materials usually are challenging to manufacture and process compared to widely available materials such as metals. Ceramics and semiconductors are considered extremely hard and brittle, making them very difficult to cut and manufacture. The other major and fast-growing type of materials are composites (including Ceramic Matrix Composites, CMC) that are also considered very challenging to machine. All these materials have many applications in major industries (i.e. electronics, aerospace, optics, …

Go to article

Finite Element Modeling And Experimental Characterization Of Knot Configuration Effect On The Mechanical Performance Of Surgical Suture, Arz Y. Qwam Alden Dec 2018

Finite Element Modeling And Experimental Characterization Of Knot Configuration Effect On The Mechanical Performance Of Surgical Suture, Arz Y. Qwam Alden

Dissertations

Tendon injuries in orthopedic surgery and sports medicine are escalating; hence there is great interest in improving tendon repair. The integrity of tendon repair depends in part on a combination of suture material, suture size and knot configuration. Recent studies have indicated the failure of surgical knots as a failure mode during surgical repair. Further, there is still no consensus on the ideal (best/safest) surgical knot techniques. Also, this failure mode is related to stress concentrations, which cannot be easily established with traditional tensile testing. Most researchers have focused on the measurement and comparison of the gross structural response of …

Go to article

Assessing The Limitations Of Effective Number Of Samples For Finding The Uncertainty Of The Mean Of Correlated Data, Barton L. Smith, Douglas R. Neal, Mark Feero, Geordie Richards Nov 2018

Assessing The Limitations Of Effective Number Of Samples For Finding The Uncertainty Of The Mean Of Correlated Data, Barton L. Smith, Douglas R. Neal, Mark Feero, Geordie Richards

Mechanical and Aerospace Engineering Faculty Publications

The efficacy of recent and classical theories on the uncertainty of the mean of correlated data have been investigated. A variety of very large data sets make it possible to show that, under circumstances that are often too expensive to achieve, the integral time scale can be used to determine the effective number of independent samples, and therefore the uncertainty of the mean. To do so, the data set must be sufficiently large that it may be divided into many records, each of which is many integral time scales long. In this circumstance, all lags of the autocorrelation should be …

Go to article

Toward Building Resilient, Sustainable, And Smart Infrastructure In The 21st Century, Aly Mousaad Aly Nov 2018

Toward Building Resilient, Sustainable, And Smart Infrastructure In The 21st Century, Aly Mousaad Aly

Faculty Publications

In recent years, as a result of significant climate change, stringent windstorms are becoming more frequent than before. Given the threat that windstorms bring to people and property, wind/structural engineering research is imperative to improve the resilience of existing and new infrastructure, for community safety and assets protection. The Windstorm Impact, Science and Engineering (WISE) research program at Louisiana State University (LSU) focuses on creating new knowledge applicable to the mitigation of existing and new infrastructure, to survive and perform optimally under natural hazards. To achieve our research goals, we address two imperious challenges: (i) characterization of realistic wind forces …

Go to article

Control Of Uncertain Dynamical Systems With Spatial And Temporal Constraints, Ehsan Arabi Nov 2018

Control Of Uncertain Dynamical Systems With Spatial And Temporal Constraints, Ehsan Arabi

USF Tampa Graduate Theses and Dissertations

The overarching objective of this dissertation is the development of feedback control frameworks for uncertain dynamical systems that are subject to spatial and/or temporal constraints. These spatiotemporal constraints usually arise from the physical and/or performance characteristics associated with a considered dynamical system in safety-critical applications, where synthesis and analysis of feedback control laws are not trivial. Specifically, the proposed control architectures in this dissertation mainly contribute to the model reference adaptive control and finite-time control literature. In particular, unlike existing model reference adaptive control approaches that are not capable of enforcing user-defined performance guarantees without an ad-hoc tuning process, the …

Go to article

Evaluation Of The 20 L Dust Explosibility Testing Chamber And Comparison To A Modified 38 L Vessel For Underground Coal, Robert Quentin Eades, Kyle A. Perry, Catherine E. Johnson, Jacob Miller Nov 2018

Evaluation Of The 20 L Dust Explosibility Testing Chamber And Comparison To A Modified 38 L Vessel For Underground Coal, Robert Quentin Eades, Kyle A. Perry, Catherine E. Johnson, Jacob Miller

Mining Engineering Faculty Research & Creative Works

The phenomenon of combustible dust explosions is present within many industries. Tests for explosibility of dust clouds per ASTM E1226 use a 20 L explosive chamber that places the combustible dust directly below the dispersion nozzle which generates a thorough mixture for testing purposes. However, in the underground coal mining industry, there are a number of geologic, mining, and regulatory factors that change the deposition scheme of combustible coal dust. This causes the atmosphere of a coal mine to have a variable rock dust-coal dust mixture at the time of ignition. To investigate the impact of this variable atmosphere, a …

Go to article

Prediction Of Thermal Conductance At Liquid-Gas Interfaces Using Molecular Dynamics Simulations, James Gonzalez, Josue Ortega, Zhi Liang Nov 2018

Prediction Of Thermal Conductance At Liquid-Gas Interfaces Using Molecular Dynamics Simulations, James Gonzalez, Josue Ortega, Zhi Liang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Using Molecular Dynamics (MD) Simulations and Theoretical Calculations, We Study Heat Transfer Across Liquid-Gas Interfaces within a Planar Heat Pipe. to Determine the Thermal Conductance (Kapitza Conductance), GK, at the Interface, Two Heat Transfer Mechanisms, Namely, Conduction and Evaporation/condensation Are Considered. in the Case of Interfacial Heat Conduction, Gas Molecules, Particularly Non-Condensable Gas Molecules, Exchange Heat with Liquid Surfaces through Gas-Liquid Collisions, and the Theoretical Expression for GK is Derived from the Kinetic Theory of Gases. for Interfacial Heat Transfer by Evaporation or Condensation, the Theoretical Expression for GK is Derived from the Schrage Relationships. to Assess the Accuracies of …

Go to article

Dielectrophoretic Nanoparticle Propellant Injection With Plasmonic Acceleration, Jaykob Maser, Joshua Rovey Oct 2018

Dielectrophoretic Nanoparticle Propellant Injection With Plasmonic Acceleration, Jaykob Maser, Joshua Rovey

Mechanical and Aerospace Engineering Faculty Research & Creative Works

We describe the concept of a dielectrophoretic propellant injector and its inclusion in a plasmonic-based, small-satellite propulsion system. Thrust is achieved by applying a plasmon generated non-uniform electromagnetic field, and corresponding dielectrophoretic force, to net-neutral nanoparticles.

Go to article

Liquid Jet Penetration And Breakup In A Free Supersonic Gas Jet, Hansen Jones Oct 2018

Liquid Jet Penetration And Breakup In A Free Supersonic Gas Jet, Hansen Jones

LSU Master's Theses

In the testing of today’s rocket engines, both on large scale vertical test stands and smaller subscale horizontal component testing stands, it is extremely important to be able to accurately quantify and mitigate the thermal and acoustic loads the engines will generate on test stand infrastructure. Due to the large number of parameters that must be considered for many cases, development of a multi-phase computational code is under way to properly analyze and design water spray cooling systems used at NASA’s Stennis Space Center (SSC) and across other NASA centers. As such, a small-scale experiment has been conducted at Louisiana …

Go to article

Computational Aerodynamics And Anatomical Characterization Of Laryngotracheal Stenosis In Children, William Poynot Oct 2018

Computational Aerodynamics And Anatomical Characterization Of Laryngotracheal Stenosis In Children, William Poynot

LSU Master's Theses

Laryngotracheal stenosis (LTS) is a health condition in which an obstruction in the upper trachea can cause breathing difficulties and increased incidence of infection, among other symptoms. Occurring most commonly due to intubation in infants, LTS often requires corrective surgery. Currently, clinical methods of assessing the blockage region are simplistic and subjective, and it is challenging to determine the most effective surgical strategy for any given patient. In the present work, a comprehensive methodology is proposed for characterizing the stenosis region both in terms of its anatomical parameters and its corresponding aerodynamic properties. The combination of computational fluid dynamics (CFD) …

Go to article

Impulsive Dynamics And Control Of The Inertia-Wheel Pendulum, Nilay Kant, Ranjan Mukherjee Oct 2018

Impulsive Dynamics And Control Of The Inertia-Wheel Pendulum, Nilay Kant, Ranjan Mukherjee

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The dynamics of the inertia-wheel pendulum, when subjected to impulsive inputs, can be described by algebraic equations. Optimal sequences of these inputs, that minimize their infinity norm, are designed for rest-to-rest maneuvers. The results are applied to the well-studied swing-up problem, and high-gain feedback is used for continuous approximation of the inputs and simulation of the impulsive dynamics. Analytical and simulation results establish a direct link between high wheel velocities during swing-up and control strategies that take the pendulum directly to the upright configuration. They also indicate that optimal trajectories resemble those of energy-based controllers and can be designed to …

Go to article

Explosive Dust Test Vessel Comparison Using Pulverized Pittsburgh Coal, Jacob Miller, Jay Schafler, Phillip R. Mulligan, Robert Eades, Kyle A. Perry, Catherine E. Johnson Oct 2018

Explosive Dust Test Vessel Comparison Using Pulverized Pittsburgh Coal, Jacob Miller, Jay Schafler, Phillip R. Mulligan, Robert Eades, Kyle A. Perry, Catherine E. Johnson

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Explosions of coal dust are a major safety concern within the coal mining industry. The explosion and subsequent fires caused by coal dust can result in significant property damage, loss of life in underground coal mines and damage to coal processing facilities. The United States Bureau of Mines conducted research on coal dust explosions until 1996 when it was dissolved. In the following years, the American Society for Testing and Materials (ASTM) developed a test standard, ASTM E1226, to provide a standard test method characterizing the “explosibility” of particulate solids of combustible materials suspended in air. The research presented herein …

Go to article

Design Of Selectively Compliant Morphing Wind Turbine Blade Section Using Bistable Laminate For Passive Load Alleviation, Abhishek Chopra, Dr. Andres Arrieta, Janav Udani, Jose Rivas Padilla Aug 2018

Design Of Selectively Compliant Morphing Wind Turbine Blade Section Using Bistable Laminate For Passive Load Alleviation, Abhishek Chopra, Dr. Andres Arrieta, Janav Udani, Jose Rivas Padilla

The Summer Undergraduate Research Fellowship (SURF) Symposium

The design of passively controlled compliant morphing structures for large scale wind turbine blades has been of interest due to the inherent advantages of lower mass and reduced complexity over their active counterparts. Previous studies have indicated that embedding a locally bi-stable element within the turbine blade section successfully allows for achieving passive load alleviation. The embedded bi-stable member switches from one stable state to another at a critical aerodynamic load. This local structural change results in a global shift in the aeroelastic response of the blade section. Building on these preliminary results, this research investigates a two- dimensional wind …

Go to article

Multi-Physics Design Optimization Of 2d And Advanced Heterogenous 3d Integrated Circuits, Pavan Rajmane Aug 2018

Multi-Physics Design Optimization Of 2d And Advanced Heterogenous 3d Integrated Circuits, Pavan Rajmane

Mechanical and Aerospace Engineering Dissertations - Archive

The convergence and miniaturization of computing and communications dictate building up rather than out. As planar device miniaturization continues to its ultimate limits, the complexity of circuit interconnections for 2-D devices becomes a limitation for performance and drives up power dissipation [1]. Failure analysis and its effects are major reliability concerns in electronic packaging. More accurate fatigue life prediction can be obtained after the consideration of all affecting loads on the electronic devices. In this study, an attempt is made to analyze 3 types of packages i.e. Wafer Level Chip Scale Package (WCSP), Quad Flat No-Lead (QFN) Package and 2-Die …

Go to article

A Framework For Optimal Path Planning And Nonlinear Guidance For Autonomous Mobile Robots, Paul A. Quillen Aug 2018

A Framework For Optimal Path Planning And Nonlinear Guidance For Autonomous Mobile Robots, Paul A. Quillen

Mechanical and Aerospace Engineering Dissertations - Archive

The purpose of this research is to investigate methods and technology for enhancing autonomous capabilities for mobile robots. The measures of autonomy which are specifically covered in this dissertation pertain to a mobile robot’s ability to make decisions and act, in other words guidance and control. This dissertation puts forth a framework using optimal path planning and nonlinear guidance techniques to address these matters. The path plans are synthesized using a numerical navigation function algorithm that will form its potential contour levels based on the “minimum control effort” of the system. Additionally, extensions of the path planning algorithm in the …

Go to article

Numerical And Experimental Study Of Single Phase And Multiphase Droplet Dynamics On Electrowetting-On-Dielectrode Digital Micro-Fluidics, Mun Mun Nahar Aug 2018

Numerical And Experimental Study Of Single Phase And Multiphase Droplet Dynamics On Electrowetting-On-Dielectrode Digital Micro-Fluidics, Mun Mun Nahar

Mechanical and Aerospace Engineering Dissertations - Archive

In the recent years, significant efforts have been devoted to the development of droplet based lab-on-a-chip devices of which advantages include being programmable and reconfigurable. Among various droplet flow based microsystems [1-5], electrowetting on dielectric (EWOD) digital microfluidics has many advantages, such as rapid switching response, no joule heating, no need for moving parts like pumps and valves, and most importantly low power requirement [6]. Basic droplet handling techniques - droplet dispensing, transporting, merging and splitting - can be done by sequentially activating and deactivating specific electrodes, which allows to address each droplet individually and to perform various unit processes …

Go to article

A Multiphysics Study Of Interfacial Properties Of 3d Printed Filaments, Alireza Rezaee Aug 2018

A Multiphysics Study Of Interfacial Properties Of 3d Printed Filaments, Alireza Rezaee

Mechanical and Aerospace Engineering Dissertations - Archive

Fused Deposition Modeling has become the most popular 3-D printing method over the last decade. Due to its potential to save time, cost and, labor, there is a great deal of interest to use this technique for production of functional load carrying parts and assemblies in bio-medical, automotive, aerospace, and oil and gas industries. In general, materials used in FDM process are isotropic; however, parts printed using FDM process show anisotropic mechanical properties with inconsistent properties in the transverse direction to the filaments’ cross-section. This anisotropic behavior is due to the fabrication process, and the inconsistency in the transverse mechanical …

Go to article

Characterizing Contamination To Expand Ashrae Envelope In Airside Economization And Thermal And Reliability In Immersion Cooling Of Data Centers, Jimil Manojbhai Shah Aug 2018

Characterizing Contamination To Expand Ashrae Envelope In Airside Economization And Thermal And Reliability In Immersion Cooling Of Data Centers, Jimil Manojbhai Shah

Mechanical and Aerospace Engineering Dissertations - Archive

The Datacom facility which comprises rooms or closets used for communication, computers/servers or electronic equipment requires cooling unit which consumes 31% (23% HVAC cooling + 8% HVAC fans) of overall energy. The ASHRAE TC9.9 subcommittee, on Mission Critical Facilities, Data Centers, Technology Spaces, and Electronic Equipment, has suited the data center’s executives by permitting brief period outings of the environmental conditions outside the prescribed temperature-humidity range, into passable extents A1-A3. To comprehend the expanding server densities and the required cooling vitality costs, data center operators are falling back on cost cutting measures. For instance, they are not firmly controlling the …

Go to article

Woods Tire Model, Priyank Vasant Nandu Aug 2018

Woods Tire Model, Priyank Vasant Nandu

Mechanical and Aerospace Engineering Theses - Archive

The performance of a racecar in a maneuver is almost totally determined by the characteristics of the tires and the suspension setup. If the suspension is properly tuned for the maneuver, then the limiting factor is the tire. Therefore, any racecar design and performance analysis must start with a full description of the performance of the tire [1]. Mathematical models for tire performance such as the Pacejka model have been in use for a long time and have become the standard for expressing how a tire will perform dynamically. It comprises of curve fit to experimental data and requires about …

Go to article

Design Survey Of Laminated Composite I-Beam, Mrinmoy Saha Aug 2018

Design Survey Of Laminated Composite I-Beam, Mrinmoy Saha

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Composite I-beams are popular for high-strength low-weight applications. Learning the macro-mechanics and designing the composite I-beam properly are necessary. In this report, a design overview of the composite I-beam is discussed which is based on classical lamination theory where it includes the homogenization approach, the plane stress assumption and the Kirchhoff hypothesis. Using these assumptions, a method was developed to come up with the effective material properties of a beam. Formulas to calculate maximum deflection and maximum bending stress and shear stress and the stress concentration at the connection of web-flange are discussed which describe ways for designing and manufacturing …

Go to article

Investigation Of Thermo-Physical Property Enhancement Mechanism Of Molten Salt Nano-Eutectic Via Nanostructural Change And Polyalphaolefin Nanofluid Via In Situ Formation Of Superstructures, Zahra Pournorouz Aug 2018

Investigation Of Thermo-Physical Property Enhancement Mechanism Of Molten Salt Nano-Eutectic Via Nanostructural Change And Polyalphaolefin Nanofluid Via In Situ Formation Of Superstructures, Zahra Pournorouz

Mechanical and Aerospace Engineering Dissertations - Archive

For many years, scientists enhanced the specific heat capacity of molten salt nanofluids by dispersing only minute concentrations of different nanoparticles (e.g., 1 wt.%). While the specific heat capacity for molten salts was enhanced in many types of research, other engineering fluids (i.e., water, ethylene glycol, oil) showed decreased specific heat capacity with doping the nanoparticles. Recently, researchers discovered that a unique nanostructure formed by molten salt molecules, which were doped and interacted with nanoparticles, were the reason for enhanced specific heat capacity. Therefore, the enhanced specific heat capacity only happens for molten salts rather than other fluids that may …

Go to article

Wireless Antenna Sensors For Boiler Condition Monitoring, Franck Tchafa Aug 2018

Wireless Antenna Sensors For Boiler Condition Monitoring, Franck Tchafa

Mechanical and Aerospace Engineering Dissertations - Archive

Structural Health Monitoring (SHM) is a vital technology that implements real-time condition monitoring or damage detection mechanisms for the safety assurance of structural systems such as power stations, aircrafts, bridges, dams, buildings, large machinery, and more. Without proper and timely maintenance, mechanical systems are prone to failures since they experience detrimental factors such as harsh environments, excessive loads, and vibrations. Several sensing technologies exist for SHM applications. Patch antennas are among the list of these technologies, and they are an attractive choice due to their compact size, light weight, ease of manufacturing, and low fabrication cost. Patch antennas have been …

Go to article

Fast Prediction Of Thermal Distortion In Metal Powder Bed Fusion Additive Manufacturing: Part 2, A Quasi-Static Thermo-Mechanical Model, Hao Peng, Morteza Ghasri-Khouzani, Shan Gong, Ross Attardo, Pierre Ostiguy, Ronald B. Rogge, Bernice Aboud Gatrell, Joseph Budzinski, Charles Tomonto, Joel Neidig, M. Ravi Shankar, Richard Billo, David B. Go, David Hoelzle Aug 2018

Fast Prediction Of Thermal Distortion In Metal Powder Bed Fusion Additive Manufacturing: Part 2, A Quasi-Static Thermo-Mechanical Model, Hao Peng, Morteza Ghasri-Khouzani, Shan Gong, Ross Attardo, Pierre Ostiguy, Ronald B. Rogge, Bernice Aboud Gatrell, Joseph Budzinski, Charles Tomonto, Joel Neidig, M. Ravi Shankar, Richard Billo, David B. Go, David Hoelzle

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The additive manufacturing (AM) process metal powder bed fusion (PBF) can quickly produce complex parts with mechanical properties comparable to that of wrought materials. However, thermal stress accumulated during Metal PBF may induce part distortion and even cause failure of the entire process. This manuscript is the second part of two companion manuscripts that collectively present a part-scale simulation method for fast prediction of thermal distortion in Metal PBF. The first part provides a fast prediction of the temperature history in the part via a thermal circuit network (TCN) model. This second part uses the temperature history from the TCN …

Go to article

Fast Prediction Of Thermal Distortion In Metal Powder Bed Fusion Additive Manufacturing: Part 1, A Thermal Circuit Network Model, Hao Peng, Morteza Ghasri-Khouzani, Shan Gong, Ross Attardo, Pierre Ostiguy, Bernice Aboud Gatrell, Joseph Budzinski, Charles Tomonto, Joel Neidig, M. Ravi Shankar, Richard Billo, David B. Go, David Hoelzle Aug 2018

Fast Prediction Of Thermal Distortion In Metal Powder Bed Fusion Additive Manufacturing: Part 1, A Thermal Circuit Network Model, Hao Peng, Morteza Ghasri-Khouzani, Shan Gong, Ross Attardo, Pierre Ostiguy, Bernice Aboud Gatrell, Joseph Budzinski, Charles Tomonto, Joel Neidig, M. Ravi Shankar, Richard Billo, David B. Go, David Hoelzle

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The additive manufacturing (AM) process metal powder bed fusion (PBF) can quickly produce complex parts with mechanical properties comparable to wrought materials. However, thermal stress accumulated during PBF induces part distortion, potentially yielding parts out of specification and frequently process failure. This manuscript is the first of two companion manuscripts that introduce a computationally efficient distortion and stress prediction algorithm that is designed to drastically reduce compute time when integrated in to a process design optimization routine. In this first manuscript, we introduce a thermal circuit network (TCN) model to estimate the part temperature history during PBF, a major computational …

Go to article

Shape Optimization Of A Fan Duncte For A Vertical Takeoff And Landing, Jie Hua Aug 2018

Shape Optimization Of A Fan Duncte For A Vertical Takeoff And Landing, Jie Hua

Mechanical and Aerospace Engineering Theses - Archive

The popularity of ride sharing services and recent improvements in electric car performance and automation have sparked interest in E-VTOL (Electric Vertical Takeoff and Landing) aircraft for personal transportation. Companies such as Uber, Airbus and EHANG are currently researching such aircraft for transportation over short distances in crowded urban environments. A personal E-VTOL design based on a ducted fan concept is proposed and the vertical lift capability is optimized. A numerical optimization algorithm is coupled with a computational fluid dynamics (CFD) analysis code to perform shape optimization. The objective is to determine the internal and external duct shape that maximizes …

Go to article

A Study Of Effect Of Bond Length On Bond Strength Using Transient Heat Transfer Analysis, Junaid Mohamed Baig Aug 2018

A Study Of Effect Of Bond Length On Bond Strength Using Transient Heat Transfer Analysis, Junaid Mohamed Baig

Mechanical and Aerospace Engineering Theses - Archive

It is important to understand the mechanical properties of the bonding between the adjacent layers of 3D printed parts build by fused deposition modeling. The bonding process is highly nonlinear and depends on various geometrical and thermal process parameters. This work aims to quantify the degree of bonding by calculating bond potential between the extruded layers using finite element heat transfer analysis. Successive transient analysis were carried out using this model by constantly updating the boundary conditions and geometric model during the deposition of the extruded bead. Temperatures at critical points were calculated over a period to calculate the bond …

Go to article

Inverse Analysis Of Heat Generating Body For Safety Applications, Sandeep Patil Aug 2018

Inverse Analysis Of Heat Generating Body For Safety Applications, Sandeep Patil

Mechanical and Aerospace Engineering Dissertations - Archive

Inverse thermal analysis and its applications have been applied to numerous fields of science and engineering. Historically during the 1950's and early 1960's, space programs played a significant role in the advancement of solution techniques for Inverse Heat transfer Problems(IHTP). It was applied to measure the surface temperature of thermal shield of a space vehicle during its re-entry into atmosphere. Inverse analysis was also used in the estimation of thermo-physical properties of the shield at high operating temperatures. Besides thermal application, inverse technique was also used in other engineering applications such as estimation of alloy specification, design of a shape …

Go to article

Optimization Of Board Level Reliability Of Microelectronic Packages And Modules, Alok Kumar Lohia Aug 2018

Optimization Of Board Level Reliability Of Microelectronic Packages And Modules, Alok Kumar Lohia

Mechanical and Aerospace Engineering Dissertations - Archive

Thermo-mechanical reliability estimation of electronic packages and modules provides an opportunity to predict the function life of semiconductor devices. The problem complexity lies in the fact that there are variety of electronic packages with different form factors, materials and manufacturing technology for various applications. The custom PCB ranges from very thin for portable application to very thick for power application. Despite conventional understanding and prior studies, some of the failures were not explained. This study reviews three failure problems for QFN, WCSP and BGA packages by characterizing the properties of custom PCB materials by layer removal process. Due to layup …

Go to article

First Prev Next Last