Structural Materials Commons^™

Uhpc Shear Keys In Concrete Bridge Superstructures, Craig Newtson, Brad Weldon, Elsy Flores, Jordan Varbel, William Toledo

Publications

This research investigated the use of locally produced ultra-high performance concrete (UHPC) as a grouting material to repair deteriorated shear keys. Shear keys are used in adjacent girder superstructures to produce monolithic behavior and load transfer across the structure. Shear key durability is a concern since shear key degradation can jeopardize the integrity of the structure. Transportation agencies have reported that 75% of distress in adjacent girder bridges is due to cracking and de-bonding along shear keys. Previous research has shown that locally produced UHPC has excellent mechanical and durability properties. UHPC has also been shown to have good bonding …

A Concrete Water Pasteurization Device For Third World Countries, Andrea R. Murchie

Senior Honors Projects, 2010-2019

In the rural areas of South Africa, as well as many other developing countries, people cook food and sterilize their water by heating over open fires. Many times the fires are inside of homes, which more often than not are very small. Children will often be the ones to tend to the fire, out of necessity while parents and other family members are tending to other work and needs.

The purpose of my Senior Honors Project was to design a concrete vessel that can hold water and heat the water to pasteurization (149°F) when exposed to sunlight for an extended …

Evaluating A New Cem Iii/A Cement For Concretes Exposed To Harsh Acid Rich Environments, David Thompson, Niall Holmes, John Reddy

Conference papers

The Irish Annex to the European specification, performance, production and conformity of concrete, IS EN 206, recommends CEM III/B cement for acid rich environments containing between 66 to 80% GGBS. However, BS 8500, the UK annex to EN 206 and the British Research Establishment (BRE) Special Digest 1, recommends CEM III/A cement with a GGBS range of 36-65%. This project investigated the performance of a new CEM III/A cement produced by Ecocem Ireland in concretes exposed to such environments using an extensive suite of laboratory tests.

In Ireland, up to €5.8bn will be invested to provide fresh drinking water and …

Durability Of Silane Sealer In A Highly Alkaline Environment, Cameron David Murray

Graduate Theses and Dissertations

Alkali-silica reaction (ASR) is a chemical reaction between siliceous minerals present in certain aggregates and alkalis in the concrete pore solution. The reaction can lead to expansion and severe damage in concrete members. One method to mitigate ASR expansion is to use a penetrating sealer such as silane. A set of columns located in a food preparation facility was treated with silane and a complimentary laboratory study was performed. A cleaning regimen involving application of an alkaline cleaner is employed at the facility, followed by rinsing with hot, pressurized water. The purpose of this research is to evaluate the effectiveness …

Mechanical And Transport Properties Of Alkali-Activated Natural Pozzolans As Sustainable Binders, Brittany Radke

Calvert Undergraduate Research Awards

OPC production accounts for 5 to 7% of the global carbon dioxide (CO₂) emissions, contributing to global warming. The desire to reduce CO₂ emissions and produce more durable concrete has given impetus to search for new binders. It is suggested that alkali-activated natural pozzolans have the potential for use as a sustainable replacement for OPC in concrete.

The current study presented herein evaluated fresh, mechanical, and transport properties of alkali-activated natural pozzolan mortars containing various concentrations of sodium hydroxide solutions as an alkaline activator. To this aim, alkali-activated natural pozzolan mortars were made with concentrations of sodium …

Compression Testing And Failure Modes Of Steel-Concrete Composite (Sc) Structures For Nuclear Containment, Patrick Michael Wanamaker, Amit H. Varma

The Summer Undergraduate Research Fellowship (SURF) Symposium

Although being able to provide much cleaner power than burning coal and other fossil fuels, nuclear power plants are still a tough sell to the general public due to their history of being spontaneously dangerous. The containment structures surrounding these nuclear plants, however, can play a huge role in reducing the risks associated with them. Relatively new designs for these containment assemblies, known as SC (steel-concrete composite) structures, aim to increase the strength and durability of the containment facilities while keeping costs down. By varying the spacing between shear studs, the ratio of concrete to steel, and the ratio of …

Effects Of Alternate Cementitious Materials On Compressive Strength And Environmental Impacts Of Cement Mix Designs., Mitchell R. Bush

Materials Engineering

Specific proportions of Portland cement, fly ash, and blast furnace slag cement mixtures where chosen by a ternary phase diagram to be investigated. By experimental testing and company data history fly ash was limited to not exceed 30% and contribution of Portland cement must be over 50%. Ten chosen mix designs were batched by following ASTM C305-94 and cured for twenty-eight and forty-two days, the extended cure length allows the reaction of pozzolanic material with calcium hydroxide to complete. Compressive strength testing at forty-two days yielded low strength for mix designs with 20% or less Portland cement compared to our …

Introducing Fly Ash Into Lsi's Recipe, Andrew Mathias Beckrich

All Graduate Theses, Dissertations, and Other Capstone Projects

There has been published data that states that concrete producers can use Fly Ash as an alternative to Portland cement and still generate similar or better strength properties. By applying these principles to our industry and products, what new processes will need to be put in place and followed? What is the correct combination/portion of Fly Ash that will produce similar and better results as well as the adjusted new recipes? What type of cost is associated with the introduction of this new ingredient? Lastly, how does this affect the quality and reputation of the product?

Recycling Waste Latex Paint In Overlays, Rigid Pavements, And Pervious Concrete, Oscar Inez Quiroz

UNLV Theses, Dissertations, Professional Papers, and Capstones

With over 16 million gallons of latex paint (WLP) being disposed every year it is the largest by volume, liquid hazardous waste in the United States. WLP is difficult to recycle and hazardous to the environment due to the volatile organic compounds it contains. Several methods exist for disposing WLP including paint swaps, combustion, drying and discarding in a landfill, and by placing pigments in cement. Many communities are moving to dispose WLP by drying and placing in a landfill due to the reduced cost. However, this is the least preferred technique for the environment because it creates a need …

Nonlinear Model For Reinforced Concrete Under Cyclic Loading, Aly Said, M. Elmorsi, M. Nehdi

Civil and Environmental Engineering and Construction Faculty Research

Most of the available shear models for reinforced concrete rely on empirical formulations. In this study, a rational shear stress function is used to define the shear stress–strain envelope for reinforced concrete. Cyclic rules are proposed to define the loading, unloading and reloading relationships for reinforced concrete under shear stress reversals. A normal stress function describing the cyclic relationship of concrete under axial stress is also introduced. The proposed functions are verified using experimental data of reinforced concrete panels tested under monotonic and cyclic loading. Subsequently, the normal and shear stress functions along with their cyclic rules are integrated in …

Concrete In Dairies, D Roger Buchanan

Journal of the Department of Agriculture, Western Australia, Series 4

PRIME requirements for exposed concrete surfaces in dairies are that they should be easily cleansed and should not deteriorate in contact with milk and milk products.

In milking stalls, animal races and on loading platforms hardwearing surfaces which offer good foothold are also necessary.