Structural Materials Commons^™

Treatment And Measurement Of Water Inrush During Highway Tunnel Construction, Wang C Haojie, Feng Zhihua, Fan Haobo

Journal of China & Foreign Highway

As a special geological condition of highway tunnels，water inrush will cause difficulties in engineering construction technology and management.Unnecessary disputes and management difficulties will emerge when different construction units hold different views about the treatment measures of water inrush，which leads to distributed provisions in the specification and a long treatment period.In view of key problems about the water inrush during highway tunnel construction，including water inrush treatment concept，investigation and estimation，measurement and pricing，and on-site confirmation，this paper systematically sorted out the current regulations and other guiding documents and investigated the treatment methods of tunnel water inrush and reverse slope pumping in China ’s highway …

Stability Of Excavation Face Of Double‑Mode Shield In Earth Pressure Mode Crossing Fault Zone Of Pearl River, Tong Bin, Zhang Bin, Zhu Hanbiao, Wang Shuying

Journal of China & Foreign Highway

In view of the stability of the excavation face of the double-mode shield crossing the fault zone of the Pearl River，the project of the section from Hongshengsha Station to Yufengwei Station of the second phase of Guangzhou Metro Line Seven was studied.Through numerical simulations conducted to analyze the whole area and the local high-risk area of the shield crossing the fault zone of the Pearl River，this paper explored the construction risk of the shield crossing process.Besides，this paper analyzed the influence of different support stresses and grouting pressures on the stability of the excavation face and ground deformation，and finally，the tunneling parameters …

Intelligent Recognition Technology Of Highway Cracks Based On Semantic Segmentation, Gao Liang, Rao Faqiang, Yang Zhongmin, Dai Zongsheng, Sun Hao

Journal of China & Foreign Highway

Real-time detection and timely treatment of highway cracks are crucially fundamental for vehicle safety.Rapid identification and comparison of cracks is a new method for monitoring the development and changes of geological disasters especially when they induce cracks.Therefore，this study proposed an intelligent recognition method of highway cracks based on semantic segmentation，establishing a model with dataset，neural network，calculation parameters，and evaluation indicators to rapidly identify the cracks.The results show that，firstly，when the neural network Attention U-net built in this study semantically segments highway cracks，the binary cross loss function value and accuracy rate reach 0.008 7 and 0.998 4，respectively.Secondly，compared with traditional algorithms，the semantic segmentation method shows …

Overall Design Concept Of Municipal Reconstruction Of Cross‑City Expressway, Fu Yuankun, Zhang Yu

Journal of China & Foreign Highway

The municipal reconstruction of the cross-city expressway is of great significance in enlarging the urban framework，refining the spatial pattern，and promoting the integrated development of clusters.However，China’s expressways seldom undergo municipal reconstruction，with less synergy formed with cities.Therefore，taking one case described above in Hebei Province as an example，this article proposed the overall design concept of integrating with the city from urban space，road networks，municipal facilities，urban ecology，cultural landscape，and other perspectives after analyzing problems in urban space，traffic，industry，landscape and urban quality in existing cross-city expressways. In addition，this paper studied and optimized the municipal reconstruction plan.Holding a theme of “municipalization ”，the plan eliminated the fragmentation of urban space …

Deformation Measurement And Safety Warning Of Highway Bridges Based On Machine Vision, Su Ziyue, Du Wenkang, Lei Dong

Journal of China & Foreign Highway

The structural safety of highway bridges plays a crucial role in traffic safety operations and regional economic development.Due to the rapid increase and complex changes in traffic loads，the demand for real-time monitoring of bridge ’s structural deformation and safety conditions has been increasingly prominent.However，the structural health monitoring system，dominated by contact sensors，has limitations such as difficult installation and construction，complicated maintenance and replacement，and the need to interrupt traffic.To this end，a non-contact deformation measurement system based on machine vision was proposed.Template matching and feature point recognition methods were utilized to achieve recognition of structural surface markings and displacement extraction of key positions.The accuracy …

Development Trend On Raw Materials Market Of Ready‑Mixed Concrete Under Green Construction, Ding Hu, Ding Qingjun, Lin Haojun, Zhang Zhen

Journal of China & Foreign Highway

In the face of resource depletion，high energy consumption in production，high carbon emissions，and serious pollution brought by traditional pumpcrete raw materials，a variety of new raw materials have been gradually developed and promoted to conform with the green construction promoted by China ’s civil engineering industry，witnessing a stable increase in quality，output，and social recognition.High-quality natural river sand and pebbles are in short supply at the origin，and they can be explored in old silted river channels.Gravel and manufactured sand produced using large particle size natural pebbles，limestone，construction waste，and others as raw materials will become new substitutes.In the transformation and upgrading of production enterprises which tend …

Post‑Evaluation Method For Decision‑Making And Implementation Of Highway Maintenance Projects Based On Ahp‑Dematel, Yu Wei, Yang Na, Li Jue

Journal of China & Foreign Highway

Addressing the current lack of post-evaluation management systems related to highways，particularly highway maintenance，this paper proposed a post-evaluation method for the decision-making and implementation of highway maintenance projects based on the combination of analytic hierarchy process （AHP） and decision-making trial and evaluation laboratory （DEMATEL ）.After building a post-evaluation model for the decision-making and implementation of highway maintenance projects and designing the evaluation process，this paper calculated key factors influencing the post-evaluation of the decision-making and implementation of highway maintenance projects and their respective comprehensive weights.The research results indicate that decision-making can possess higher accuracy and efficiency under the above calculation method，providing a …

Lessons Learned From 60 Years Of Pavement Trials In Continental Climate Regions Of Canada And Future Perspective, Wang Di, Li Jingxiao, Ren Xueyuan, Zhang Fan, Yuan Dongdong

Journal of China & Foreign Highway

During the early 1960 s，Canadian road authorities began using stiffer asphalt to address the issue of early rutting in the wheel track zone of asphalt pavements，which was caused by the growing traffic volumes.Pavements constructed with stiffer asphalt commonly exhibit evenly spaced transverse cracks due to the significant internal stresses caused by low temperatures and the inadequate resistance of the asphalt to cracking under such conditions.Research conducted on asphalt pavements with cracks caused by low temperatures has verified the significant impact of asphalt ’s consistency，temperature sensitivity，phase uniformity，and durability.In order to tackle the difficulties presented by the utilization of modified asphalt in …

An In-Situ Method For Quantifying Entropy Generation In Fatigue Via A Novel Thermographic Approach, Peyton J. Wilson

LSU Master's Theses

This work features a new approach that is used to measure the rate of plastic work during a cyclic fatigue test, based on the first and second laws of thermodynamics. Using the one-dimensional Fourier heat equation coupled with the concept of fracture fatigue entropy, the rate of plastic work during fatigue can be measured without the need to interrupt a fatigue test, and the accumulated entropy to failure can be quantified. Experimental fatigue tests are conducted on Aluminum 6061-T6 specimens under cyclic axial loading and Carbon Steel 1018 specimens under fully reversed cyclic bending loading. The obtained results in addition …

Engineering Ceramic Ductility Into Aluminum Oxide, Krish Bhuva

Holster Scholar Projects

This project explores the enhancement of ductility in Aluminum Oxide (Al₂O₃) ceramics through microstructural engineering. The goal is to combine the hardness and stability of Al₂O₃ with enhanced ductility for diverse industrial applications. Inspired by the naturally occurring Itacolumite rock, known for its complex microstructure, this research aims to replicate similar microstructural features in engineering ceramics. By doping Al₂O₃ with Titanium Dioxide (TiO₂), Boron Nitride (BN), and a pore former, while employing innovative sintering techniques, we hypothesize that these modifications will lead to a measurable increase in ductility. Despite early challenges in achieving homogeneity in sintering, promising results were observed …

Concrete Design: Underwater Concrete Forms In A Saltwater Environment, Noah Z. Lau

Construction Management

This following project investigated the effects of salt on the concrete curing process. Concrete possesses numerous strengths, making it extremely versatile. This makes it one of the most utilized construction materials. New improved methods are constantly being developed for concrete’s application as a construction material. While concrete is a flexible material with many strengths, it is not without its flaws. Concrete, while strong in compression is weak in tension. It has long cure times and doesn’t generally handle moisture well. This paper evaluates concrete’s change in strength from letting concrete cure in a salt-based underwater environment. To determine the full …

Utilization Of Sodium Flame Synthesis For The Formation And Deposition Of Pure Metal Materials For Applications In Additive Manufacturing, Zachariah Wargel

McKelvey School of Engineering Graduate Student Theses & Dissertations

Advanced material classes, such as high temperature alloys, ceramics, and refractory materials have become a key area of focus for expansion in the realm of additive manufacturing. Factors such as high melting points, material homogeneity, and physical properties such as ductility limit the application of popular additive manufacturing methods to these material classes. By utilizing sodium flame synthesis and deposition (SFD) technology, nanoparticle materials can be synthesized via combustion in a laminar co-flow diffusion burner and impacted such that the deposits can be used to manufacture designed components. By using the applicable precursor materials of metal chlorides and elemental sodium …

Surface Patterning On Zirconia Dental Implants Via Laser-Induced Shockwave Imprinting, Inomjon Majidov

Masters Theses & Specialist Projects

Zirconia is rapidly becoming a preferred alternative to titanium in dental applications, primarily due to its aesthetic resemblance to natural teeth. This material’s tooth-like color avoids the aesthetic issues associated with the grey metal tint of titanium implants. Additionally, zirconia is hypoallergenic, making it an ideal choice for patients with metal sensitivities or allergies. Despite these advantages, zirconia generally exhibits lower biocompatibility and osseointegration compared to titanium implants. This study investigates laser-assisted, controlled imprinting technique on zirconia surfaces to enhance these properties. Our research used zirconia pellets, produced from powdered monoclinic zirconia pressed in a pellet press machine. Two methods …

Proportioning And Performance Of Ultra-High Performance Concrete (Uhpc) For High Friction Surface Treatment (Hfst) On Pavement And Bridge Decks, Adam R. Biehl

All Theses

High Friction Surface Treatment (HFST) is a roadway remediation technique used to improve pavement’s coefficient of friction, to enhance roadway safety. The application of HFSTs has repeatedly demonstrated the ability to significantly reduce crashes in both wet and dry conditions. Typically, epoxy-resins and calcined bauxite aggregate are used in HFST treatment. However, the high material costs and scarcity of calcined bauxite render this form of HFST an expensive and limited option for roadway rehabilitation. Therefore, the identification of alternative binders and HFST aggregates is needed for broad scale implementation. One potential alternative binder is Ultra-High-Performance Concrete (UHPC), a specialty cementitious …

On The Structure, Energy, And Segregation Behavior Of Grain Boundaries In Metallic Systems, Yasir Mahmood

All Dissertations

Nearly all structural metallic systems are multi-component polycrystalline aggregates; their microstructures are composed of crystalline grains that are internally joined at grain boundaries (GBs). This thesis focuses on GB structure, energy, and chemistry, as these greatly influence many material properties and processes, including boundary dynamics during processing treatments or under operating conditions.

Using atomistic simulations, we examine the impact of metastable GB structures on solute segregation. A wide range of GB geometries and metastable structures are used in our study. The Al-Mg alloy is used because it is of interest for light weighting. The atomistic simulation results are used to …

Physics-Informed Machine Learning Methods For Inverse Design Of Multi-Phase Materials With Targeted Mechanical Properties, Yunpeng Wu

All Dissertations

Advances in machine learning algorithms and applications have significantly enhanced engineering inverse design capabilities. This work focuses on the machine learning-based inverse design of material microstructures with targeted linear and nonlinear mechanical properties. It involves developing and applying predictive and generative physics-informed neural networks for both 2D and 3D multiphase materials.

The first investigation aims to develop a machine learning method for the inverse design of 2D multiphase materials, particularly porous materials. We first develop machine learning methods to understand the implicit relationship between a material's microstructure and its mechanical behavior. Specifically, we use ResNet-based models to predict the elastic …

Experimental Study On Reinforced Geogrid Of Construction And Demolition Wastes Based On Dic Technology, Tan Peng, Li Hai, Li Xiangping, Gu Fan, Zhang Junhui

Journal of China & Foreign Highway

In order to control differential settlement caused by new and old subgrade connections after expressway reconstruction and expansion，this paper proposed a layered treatment structure for the loose steps of the old road with high water content.A layer of construction and demolition waste was laid on the step surface of the old road to wrap the geogrid.The treatment effect was compared with that of sand wrapping and lime mixing，and the digital speckle correlation （DIC） was used to observe the reinforced influence zone，so as to determine the thickness of different layers of the subgrade wrapped by construction and demolition wastes.The particle rotation …

Experimental Study On Effect Of Temperature On Bound Water Adsorption And Deformation Of High Liquid Limit Soil, Zi Yinhui, Shen Xuning, Zhang Hao, Zhang Rui, Li Lu

Journal of China & Foreign Highway

In order to study the effect of temperature change on the bound water content adsorbed by high liquid limit clay and the deformation law of high liquid limit clay embankment，the high liquid limit clay in Hainan Province was selected as the primary research object and compared with the low liquid limit sand in Hunan Province.The effect of temperature on the bound water content adsorbed by high liquid limit clay was explored through a nuclear magnetic resonance test.In addition，the effect of temperature on the deformation of high liquid limit clay embankments was analyzed through the consolidation test with a temperature-controlled consolidometer.The …

Stability Analysis Of High And Steep Bank Slope Of Jinqi Bridge On Wudang‑Changshun Expressway, Wang Hao

Journal of China & Foreign Highway

Jinqi Bridge on the Wudang-Changshun Expressway in Guizhou Province crosses the Maotiao River，and the poor geological conditions such as dangerous rock mass and collapse accumulation body on the bank slope of the river are relatively developed，which seriously affects the site selection and safety of the bridge.In order to study the stability of the high and steep bank slope of the bridge，the paper explored the main poor geological conditions in the bridge site through a comprehensive air-ground investigation.By means of numerical analysis，InSAR，and other technologies，the movement range of dangerous rock mass on the bank slope was quantitatively evaluated.The stability and deformation mode …

Shear Creep Characteristics And Slope Deformation Mechanism Of Siliceous Slate, Li Jian, Yan Liangyu, Yu Kaibing, Li Ming, Yan Tingzhou, Zhao Jia

Journal of China & Foreign Highway

To study the time-dependent creep effect of siliceous slate and the deformation and failure evolution law of high slope，in this paper，the shear creep test of indoor rock mass was carried out to plot the shear creep duration curves of siliceous slate under different normal stresses，the shear displacement-time curve，and the creep rate-time curve under different normal loads and shear loads.The average creep rate and shear load variation of siliceous slate were studied，and the long-term shear strength parameters of siliceous slate were determined by the steady-state creep rate method.The results show that in the creep test，the sensitivity of cohesion is significantly greater …

Working Performance Of Rigid Airfield Runway Considering Influence Of Cavity Depth, Dai Xuan, Li Zhao, Cai Jing, Li Yue, Liu Guoguang, Qi Lin

Journal of China & Foreign Highway

In order to analyze the influence of cavity depth on runway safety，a numerical simulation was carried out using the finite difference method.A total of 208 sets of different working conditions were designed by taking into account factors such as different aircraft types，runway dimensions，and cavity depth and area.Based on the runway life model considering the exponential decay of the structural condition，an analytical method was proposed to evaluate the impact of the cavity on the runway life.The results show that the bending and stress of the runway increase gradually with the increase in the cavity depth，but the growth rate is getting slower …

Intelligent Compaction Of Asphalt Pavement And Its Key Influencing Factors, Zhu Huifang, Wang Liang

Journal of China & Foreign Highway

Intelligent compaction，as a new type of road construction quality monitoring and management technology，has been widely used in the compaction process of asphalt pavement.However，due to the lack of understanding of the compaction process and the interaction mechanism between asphalt mixture particles，the problems of over-compaction and non-uniformity of compaction often occur in the actual construction，which seriously affects the quality of road construction and service performance.In this study，through the combination of the engineering field and indoor tests，the variation characteristics of asphalt mixture compaction with the number of compaction were analyzed by using the semi-variance function of the geostatistical model，and the effect of temperature …

Properties And Mechanism Of Reclaimed Asphalt Based On Sbs Structure Repair, Feng Xinjun, Yang Hongyang, Xiao Honghai, Zhu Ziqiang

Journal of China & Foreign Highway

At present，the common asphalt regenerant is used for treating the aged styrene-butadiene-styrene （SBS） modified asphalt in China，which fails to repair the SBS cross-networking structure，resulting in the poor regeneration effect of the aged SBS modified asphalt.In this study，a new reactive regenerator containing a structural repair agent，extractive oil，plasticizer，solubilizer，and a small amount of SBS was used to regenerate the aged SBS modified asphalt.The conventional properties and rheological properties of reclaimed SBS modified asphalt were studied by three index tests，Brookfield viscosity test，dynamic shear rheological test，and low temperature bending rheological test.Then，a fluorescence microscope and infrared spectrometer were used to study the regeneration mechanism of the …

Influence Of Lateral Constraint Conditions And Compactness On Compression Characteristics Of Compacted Loess In Northern Shaanxi, Chang Yinghong, Zhao Jinpeng, Zhang Xiaozhou, Yang Hao, Li Zhe, Shao Dengfeng, Liu Lulu

Journal of China & Foreign Highway

In recent years，with the rapid development of road engineering construction，subgrade settlement caused by vertical compression of compacted loess has become increasingly serious.The previous research on the deformation of compacted loess mostly focuses on moisture content，porosity，saturation，and other aspects，ignoring the influence of lateral constraint conditions and different compaction on compacted loess.To address these issues，based on the reconstruction and expansion project of G 307 road in northern Shaanxi，this paper selected compacted soil samples of subgrade on site to carry out indoor compression tests.By applying different lateral constraint conditions，the stress-strain curves of compacted loess subjected to vertical multistage load under different compactness and confining …

Effect Of Aging Temperature On Properties Of Sealant Under Field Construction Conditions, Liu Hanchao, Teng Xinhua, Zhang Jingyan, Zhang Kaihua, Lin Hui

Journal of China & Foreign Highway

In order to study the influence of short-term aging temperature on the properties of sealant,a sealant was prepared,and field construction conditions were simulated.The properties of the sealant before and after short-term aging at 180‒220 ℃ were tested.The viscoelastic properties,physicochemical properties,and microstructures of the sealant were studied,and the mechanism of property changes was discussed.The results show that the cone penetration and flow value of the aged sealant decrease,while the softening point and elastic recovery rate increase.Aging at high temperature (>180 ℃) for a short time and low temperature (160 ℃) for a long time will cause obvious property changes.The tensile …

Experimental Study On Capillary Water‑Holding Characteristics Of Loess Backfill In Ecological Ditches, Nan Yalin, Zhang Xiaoyu, Chen Hong, An Peng, Liu Kui, Camara Ibrahima Kalil

Journal of China & Foreign Highway

The municipal ecological ditches have the basic functions of accumulating water for infiltration in the rainy season and conserving moisture in the dry season.However，the design of loess backfill in ecological ditches is based on no evidence，which often leads to landscape vegetation drowning in the rainy season or dying in the dry season.For this reason，a study was carried out by remoulding loess with a small-size capillary water rise height test，a large-size water-holding characteristic model test，and an unsaturated numerical analysis.The results show that the final capillary water rise height of the soil column can reach 100 cm when the dry density is …

Rotating Wheel Tracking Tester And Torsional Resistance Of Asphalt Mixtures, Yao Hongru, Wang Qiang, Lu Guangyan, Zhou Xiaolong

Journal of China & Foreign Highway

Asphalt pavement is prone to pla stic deformation and aggregate raveling when it is in torsion.At present，there is no standard test method and equipment to evaluate the torsional resistance of asphalt mixtures.In order to study the effective evaluation method for the torsional shear resistance of asphalt mixtures，this paper introduced the structures and working principles of three kinds of equipment developed in Japan.The torsional resistance of five typical asphalt mixtures was evaluated by rotating wheel tracking tests，and factors affecting the torsional resistance of asphalt mixtures were analyzed.The results show that the types of structures and binders of asphalt mixtures have an …

Performance Of Composite Modified Permeable Concrete With Nano‑Silicon And Polypropylene Fiber, Liu Benli, Zhang Peng, Shan Jingsong, Zhao Haijian, Su Benjun, Li Chao

Journal of China & Foreign Highway

In order to improve the comprehensive performance of permeable concrete，nano-silicon and polypropylene fiber were added to permeable concrete to study the performance of the composite modified permeable concrete.Firstly，the influence of single-doped nano-silicon on the performance of cement paste and permeable concrete was studied，and the content of nano-silicon and the optimal water-to-binder ratio were determined.On this basis，different proportions of polypropylene fiber were mixed，and the reasonable content of polypropylene fiber was determined.The results show that nano-silicon improves the porosity of permeable concrete and increases the optimal water-to-binder ratio.When the content of nano-silicon is 0.5%，and the water-to-binder ratio is 0.32，the compressive strength of …

Research On Performance Of Coal Gangue Concrete, Wang Jiliang, Ma Wenhui, Xu Weidong, Lyu Zhigang

Journal of China & Foreign Highway

Coal gangue is an industrial solid waste produced in the process of raw coal mining.It has a large stock and a relatively low utilization rate.Using coal gangue as concrete aggregate can not only solve the environmental pollution caused by coal gangue storage but also make up for the shortage of natural sand and gravel resources，which opens up an effective way for the large-scale utilization of coal gangue.According to the application characteristics of coal gangue as concrete aggregate，the chemical component，mineral composition，and physical properties of coal gangue were systematically analyzed.The influence of coal gangue as aggregate on the working performance，mechanical properties，volume stability，and …

Oxygen Diffusion Behavior In Asphalt Film Based On Molecular Dynamics Simulation, Zhang Yu, Li Zheng, Fang Long, Han Bo, Wang Weicheng, Mao Zigen, Liu Qi, Yu Bin

Journal of China & Foreign Highway

Asphalt aging is one of the most important concerns during the use of asphalt pavement.However，asphalt usually exists in the form of a film in the mixture.Oxygen diffusion is an important factor affecting asphalt aging.To investigate the oxygen diffusion behavior in asphalt film under different working conditions，an oxygen-asphalt-aggregate （OAA） model was developed in this study to simulate the state of the asphalt film on the aggregate surface under real conditions.Oxygen diffusion and asphalt component migration in the OAA model were investigated under different conditions of time，temperature，oxygen concentration，and aggregate type.The influence of each factor on the molecular behavior of the model was …