Semiconductor and Optical Materials Commons^™

Treated Hfo2 Based Rram Devices With Ru, Tan, Tin As Top Electrode For In-Memory Computing Hardware, Yuvraj Dineshkumar Patel

Theses

The scalability and power efficiency of the conventional CMOS technology is steadily coming to a halt due to increasing problems and challenges in fabrication technology. Many non-volatile memory devices have emerged recently to meet the scaling challenges. Memory devices such as RRAMs or ReRAM (Resistive Random-Access Memory) have proved to be a promising candidate for analog in memory computing applications related to inference and learning in artificial intelligence. A RRAM cell has a MIM (Metal insulator metal) structure that exhibits reversible resistive switching on application of positive or negative voltage. But detailed studies on the power consumption, repeatability and retention …

Epitaxial Growth Of Semi-Polar (11-22) Gallium Nitride For Uv Photosensing Application, Abdullah Haaziq Ahmad Makinudin

Student Works (2020-2029)

Semi-polar (11-22) gallium nitride (GaN) epilayers have attracted numerous interests in GaN based technology as it possess significant advantages over its polar (c-plane) counterparts such as low to none spontaneous and piezoelectric polarization which is known to impair the device performance. However, growth along semi-polar (11-22) orientation has been known to exhibit numerous defect densities such as dislocations and stacking faults (SFs). In order to acquire high quality semi-polar (11-22) GaN epilayers, various growth optimizations must be employed. In this work, the semi-polar (11-22) GaN epilayers were grown on planar m-plane sapphire substrate with the use of a 2-inch capability …

Preparations And Photoelectrochemical Performances Of Rgo-Tio2 Nanotubes Arrays, Ze-Yang Zhang, Lan Sun, Chang-Jian Lin

Journal of Electrochemistry

Decorating TiO₂ nanotube arrays with RGO to improve the photocatalytic activity of TiO₂ nanotube arrays has been reported. For the reported RGO-TiO₂ nanotube arrays, TiO₂ nanotube arrays were prepared by anodizing the high-purity Ti foil in an organic electrolyte for multiple-step treatments, while RGO were deposited on TiO₂ nanotube arrays by using cyclic voltammetry or other electrical reduction methods. To enhance the reduction degree and the coverage of RGO on the resultant RGO-TiO₂ nanotube arrays, in this work, the one-step electrochemical anodization in hydrofluoric acid was used to fabricate TiO₂ nanotube arrays with …

Specific Features Of Optical Fiber Cable Operation During Tension And Change Of Ambient Temperature, Dilmurod Davronbekov, Zafar Khakimov

Bulletin of TUIT: Management and Communication Technologies

This article examines the effect of longitudinal and thermoelastic deformation of an optical module on the technological reserve of an optical fiber. Analytical expressions are given for determining the lower limit of the technological margin of an optical fiber for various types of fiber-optic cable section along the axis.

Design, Fabrication, And Reliability Effects Of Additively Manufactured First Level Compliant Interconnects For Microelectronics Application, Tumininu David Olatunji

Graduate Theses and Dissertations

Semiconductor packaging and development is greatly dependent on the magnitude of interconnect and on-chip stress that ultimately limits the reliability of electronic components. Thermomechanical related strains occur because of the coefficient of thermal expansion mismatch from different conjoined materials being assembled to manufacture a device. To curb the effect of thermal expansion mismatch between conjoined parts, studies have been done in integrating compliant structures between dies, solder balls, and substrates. Initial studies have enabled the design and manufacturing of these structures using a photolithography approach which involves a high number of fabrication steps depending on the complexity of the structures …

Fourier Transform Infrared Spectroscopy For The Measurement Of Gesn/(Si)Gesn, Solomon Opeyemi Ojo

Graduate Theses and Dissertations

Photoluminescence (PL) and Electroluminescence (EL) characterization techniques are important tools for studying the optical and electrical properties of (Si)GeSn. Light emission from these PL and EL measurements provides relevant information on material quality, bandgap energy, current density, and device efficiency. Prior to this work, the in-house PL set-up of this lab which involves the use of a commercially-obtained dispersive spectrometer was used for characterizing both GeSn thin film and fabricated devices, but these measurements were limited by issues bordering on low spectral resolution, spectral artifacts, and poor signal-to-noise ratio (SNR) thereby resulting in the possible loss of vital information and …

Growth And Characterization Of Semiconductor Materials And Devices For Extreme Environments Applications, Abbas Sabbar

Graduate Theses and Dissertations

Numerous industries require electronics to operate reliably in harsh environments, such as extreme high temperatures (HTs), low temperature (LT), radiation rich environments, multi-extreme, etc. This dissertation is focused on two harsh environments: HT and multi-extreme.

The first study is on HT optoelectronics for future high-density power module applications. In the power modules design, galvanic isolation is required to pass through the gate control signal, reject the transient noise, and break the ground loops. The optocoupler, which consists of a lighting emitting diode (LED) and photodetector (PD), is commonly used as the solution of galvanic isolation at room temperatures. There is …

Kinetic Monte Carlo Investigations Involving Atomic Layer Deposition Of Metal-Oxide Thinfilms, David Tyler Magness

Graduate Theses/Dissertations

Atomic Layer Deposition is a method of manufacturing thin film materials. Metal-oxides such as zinc-oxide and aluminum-oxide are particularly interesting candidates for use in microelectronic devices such as tunnel junction barriers, transistors, Schottky diodes, and more. By adopting a 3D Kinetic Monte Carlo model capable of simulating ZnO deposition, the effect of parameters including deposition temperature, chamber pressure, and composition of the initial substrate at the beginning of deposition can be investigated. This code generates two random numbers: One is used to select a chemical reaction to occur from a list of all possible reactions and the second is used …

High-Temperature Optoelectronic Device Characterization And Integration Towards Optical Isolation For High-Density Power Modules, Syam Madhusoodhanan

Graduate Theses and Dissertations

Power modules based on wide bandgap (WBG) materials enhance reliability and considerably reduce cooling requirements that lead to a significant reduction in total system cost and weight. Although these innovative properties lead power modules to higher power density, some concerns still need to be addressed to take full advantage of WBG-based modules. For example, the use of bulky transformers as a galvanic isolation system to float the high voltage gate driver limits further size reduction of the high-temperature power modules. Bulky transformers can be replaced by integrating high-temperature optocouplers to scale down power modules further and achieve disrupting performance in …

Direct Solar Absorption Nanoparticle Doped Membranes For A Hybrid Membrane Distillation And Photovoltaic Cell, Alejandro Espejo Sanchez

Boise State University Theses and Dissertations

The growing demand for clean water supplies is driving the need for an innovative approach of water desalination. Developing a method for treating water with high salinities is possible with membrane distillation (MD). Additionally, MD is very attractive for pairing with solar energy due to the low temperature requirements. The integration of a membrane distillation system with a photovoltaic (PV) system will result in the co-production of electricity and clean water, thereby improving the economics of MD. Such a hybrid system will directly absorb thermal energy in the membrane for desalination while taking advantage of the spectrally selective nature of …

Anisotropic Cuinse2 Nanocrystals: Synthesis, Optical Properties And Their Effect On Photoelectric Response Of Dye-Sensitized Solar Cell, Ahmed Mysara, M Mohsen Abdelaziz, A N. Emam, A S. Mansour, A A. F. Zikry, M .B Mohamed, Y H. Elbashar

Nanotechnology Research Centre

CuInSe₂ I-III-VI₂ ternary is a semiconductor considered very good efficient solar energy conversion material. An organometallic pyrolysis method is used to prepare monodisperse CuInSe₂ nanoparticles using a mixture of oleylamine, and trioctylphosphine, as capping materials. The particle shape changes to dot, rods or flowers occur via varying the reaction temperatures (160, 200, 220±C) respectively. The obtained particles have been characterized to determine the shape and size of CuInSe₂ nanoparticles using HR-TEM and XRD. The optical and electronic properties of these particles have been investigated and discussed in detail. Then the different shapes of CuInSe …

Temporally Multiplexed Ladar Polarimeter, Christian Keyser, Richard Kenneth Martin

AFIT Patents

In a polarimeter, a polarization modulator changes a polarization phase of an output optical pulse with a modulation function that varies in time over the duration of the optical pulse. A static polarization state analyzer, which includes a one or more static polarization component analyzers and detectors, receives the modulated optical pulse after interaction with a target medium and provides time varying intensities of the polarization components of the received pulse. A signal processing module determines a polarization property of the target medium, such as a Mueller matrix, dependent upon time varied intensities over the duration of the received optical …

Mechanochemical Conversion Kinetics Of Red To Black Phosphorus And Scaling Parameters For High Volume Synthesis, Samuel V. Pedersen, Florent Muramutsa, Joshua D. Wood, Chad Husko, David Estrada, Brian J. Jaques

Materials Science and Engineering Faculty Publications and Presentations

Adopting black phosphorus (BP) as a material in electronic and optoelectronic device manufacturing requires the development and understanding of a large-scale synthesis technique. To that end, high-energy planetary ball milling is demonstrated as a scalable synthesis route, and the mechanisms and conversion kinetics of the BP phase transformation are investigated. During the milling process, media collisions rapidly compress amorphous red phosphorus (RP) into crystalline, orthorhombic BP flakes, resulting in a conversion yield of ≈90% for ≈5 g of bulk BP powder. Milling conversion kinetics, monitored via ex situ x-ray diffraction, manifest a sigmoidal behavior best described by the Avrami rate …

Nonlinear Optical Measurements Of Cdsip2 At Near And Mid-Infrared Wavelengths, Manuel R. Ferdinandus, Jamie J. Gengler, Kent L. Averett, Kevin T. Zawilski, Peter G. Schunemann, Carl M. Liebig

Faculty Publications

We measure the birefringence of the nonlinear optical (NLO) properties of cadmium silicon phosphide via the Z-scan technique at near and mid-infrared wavelengths. We discuss the implications of the NLO properties on optical parametric amplifier performance. We find that the nonlinear absorption does reduce the conversion efficiency, while the nonlinear refraction has a negligible effect.

Schottky And Poole-Frenkel Conduction Mechanisms In Zron/Sic System, Lusus Vanessa

Student Works (2020-2029)

In this work, the conduction mechanisms of Schottky Emission (SE) and Poole–Frenkel (PF) Emission for the ZrON/SiC system with a temperature range between 400 oC to 900 oC were analyzed. Understanding of the conduction charge mechanisms will help to estimate leakage characteristics of the ZrON/SiC system. Based on the J-E plot measured at different temperatures for 15 minutes, the obtained r2 was ranged between 0.90–0.98, which confirmed the data obtained complied with the standard SE model. Furthermore, the data plotted from the Effective Barrier Height Extracted from the SE plot showed the highest values of

Research Progresses Of Copper Interconnection In Chips, Lei Jin, Jia-Qiang Yang, Fang-Zu Yang, Dong-Ping Zhan, Zhong-Qun Tian, Shao-Min Zhou

Journal of Electrochemistry

In this paper, the copper interconnection technology in chip manufacturing is introduced in detail, and the essentials of acidic copper sulfate electroplating process and the mechanisms of common-used additives are reviewed. The progresses of novel additives at home and abroad are also summarized. Based on the studied achievement, the possibility of the novel copper interconnect process replacing the acidic copper electroplating is prospected.

Artificial Neural Network Discovery Of A Switchable Metasurface Reflector, J. R. Thompson, J. A. Burrow, P. J. Shah, Jonathan E. Slagle, E. S. Harper, A. Van Rynbach, I. Agha, M. S. Mills

Student Publications

Optical materials engineered to dynamically and selectively manipulate electromagnetic waves are essential to the future of modern optical systems. In this paper, we simulate various metasurface configurations consisting of periodic 1D bars or 2D pillars made of the ternary phase change material Ge2Sb2Te5 (GST). Dynamic switching behavior in reflectance is exploited due to a drastic refractive index change between the crystalline and amorphous states of GST. Selectivity in the reflection and transmission spectra is manipulated by tailoring the geometrical parameters of the metasurface. Due to the immense number of possible metasurface configurations, we train deep neural networks capable of exploring …

Synthesis And Characterization Of Bimetallic Gold-Silver (Au-Ag) Nanocatalyst Via Seed Colloid Technique, Berahim Nurafaliana

Student Works (2020-2029)

In the present study, unique catalysts of monometallic gold (Au), silver (Ag) and bimetallic gold-silver (Au-Ag) nanoparticles (NPs) were prepared with different size or diameters by the citrate-thermal reduction and the seed colloidal techniques, respectively. The catalytic nanoparticles were characterized by various advanced analytical techniques such as Ultraviolet-visible spectroscopy (UV-vis), zeta potential, electron dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), High-angle annular dark-field (HAADF) scanning transmission-electron microscopy (STEM) imaging and the energy dispersive spectroscopy (EDS) elemental mapping. The catalytic performance of the nanoparticles were ascertained through the reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) in …

Synthesis And Characterization Of Self-Cleaning Hydrophobic Organic Coating, Abdul Jaafar Amirul Syafiq

Student Works (2020-2029)

Three self-cleaning coating systems namely Polydimethylsiloxane (PDMS)/Sylgard, PDMS/3-Aminopropyltriethoxysilane (APTES) (tagged as A1) and A1 blended with nano-Calcium Carbonate (CaCO3) have been synthesised on glass substrates via dip-coating and spray-coating techniques. All of the prepared coatings were dried under ambient condition before being subjected to characterisations and testing(s). The effect of various weight percentages of Sylgard resin that are 5wt.% (S1 coating), 10wt.% (S2 coating), 15wt.% (S3 coating), and 20 wt.% (S4 coating) on the hydrophobicity, self-cleaning property, anti-fog performance and mechanical property of PDMS/Sylgard coating have been discussed in the first section of this thesis. The PDMS/Sylgard coated glass substrates …

Performance Of Pld Grown Zno Thin Film As A Thin Film Transistor, Shahidul Asif

Graduate Theses/Dissertations

The performance of ZnO thin film (grown in different parameters) as a thin film transistor (TFT) is the focus of this study. ZnO is renowned for being n-type semiconductor naturally which was utilized in fabricating a thin film transistor here. This thesis is compared the performance of ZnO thin film transistor by growing the thin film using pulsed laser deposition (PLD) on two slightly different substrates at different temperatures in an optimal 0.1 milli bar oxygen pressure which was later analyzed using other material characterization methods. The substrates were both Si (100) but had different resistivity due to different amount …

Synthesis, Self-Assembly And High-Pressure Properties Of Nanoparticles And Hybrid Nanocomposites, Lingyao Meng

Nanoscience and Microsystems ETDs

Nanoparticles have gained significant scientific interests owing to their unique structural dimensions, size- and shape-tunable properties, and numerous fascinating applications, from opto-electronics, sensor devices, to energy, environmental, and medical fields. Furthermore, the synergistic integration of other materials, including organic polymers, with nanoparticles provides new opportunities and strategies to obtain nanocomposites with superior properties and functionalities. While there is already significant research on the synthesis and characterizations of nanoparticles and hybrid nanocomposites, some research questions, such as how to design and control the interfacial morphology in polymer/nanoparticle hybrid nanocomposites, how to synthesize metal- organic framework (MOF) nanoparticles in well-defined and uniform …

Demonstration Of A Distributed Bragg Reflector For Polyvinylcarbazole And Cadmium Sulfide Layers: Modeling And Comparison To Experimental Results, Javier E. Hasbun, L. Ajith Desilva

Georgia Journal of Science

Light wave propagation in a periodically stratified medium has many applications in physics, mathematics, and engineering. The subject is of interest to students, teachers, and researchers, as it presents a great opportunity to focus on principles of optics and to understand the basics of mathematical modeling. A complete theory of wave propagation can be derived using Born’s optics theory. We employed that theory to determine the reflectivity of a one-dimensional distributed Bragg reflector (DBR) and do simulations using MATLAB. A DBR is a photonic crystal consisting of alternating layers of materials with different refractive indices. In this study, we modeled …

Fabrication Of Nanoscale Columnar Diodes By Glancing Angle Deposition, Jacob D. Weightman

Macalester Journal of Physics and Astronomy

Glancing angle deposition (GLAD) is a process in which thin films are deposited onto a substrate with obliquely incident vapor together with precisely controlled azimuthal substrate rotation. Ballistic shadowing effects due to the oblique incidence produce nanoscale structures, and a variety of feature shapes, including tilted columns, helices, and vertical columns can be achieved by varying the azimuthal rotation during the deposition process. Due to this control of morphology and the compatibility of the process with a wide variety of materials, GLAD films have found applications in a variety of fields including sensing, photonics, photovoltaics, and catalysis, where they are …

The Development Of All Solid-State Optical Cryo-Cooler, Junwei Meng

Optical Science and Engineering ETDs

This dissertation describes the development of an all solid-state optical cryo-cooler. Crystals of 10% wt. ytterbium-doped yttrium lithium fluoride (Yb³⁺:YLF) are used to cool an infrared HgCdTe sensor payload to an absolute temperature below 135 K, equivalent to delta T equal 138 K below ambient. This record level of cooling is accomplished with a single stage, in a completely vibration-free environment, with a corresponding cooling power of 190 mW. This milestone is made possible by the design and fabrication of an undoped YLF thermal link that efficiently shields the payload with a non-right angle kink from intense anti-Stokes …

Optically Pumped Spin Polarization As A Probe Of Many-Body Thermalization, Daniela Pagliero, Pablo R. Zangara, Jacob Henshaw, Ashok Ajoy, Rodolfo H. Acosta, Jeffrey A. Reimer, Alexander Pines, Carlos A. Meriles

Publications and Research

Disorder and many body interactions are known to impact transport and thermalization in competing ways, with the dominance of one or the other giving rise to fundamentally different dynamical phases. Here we investigate the spin diffusion dynamics of ¹³C in diamond, which we dynamically polarize at room temperature via optical spin pumping of engineered color centers. We focus on low-abundance, strongly hyperfine-coupled nuclei, whose role in the polarization transport we expose through the integrated impact of variable radio-frequency excitation on the observable bulk ¹³C magnetic resonance signal. Unexpectedly, we find good thermal contact throughout the nuclear spin bath, …

Pollution Prevention Via Recovery Of Cerium (Iv) Oxide In Optics Company, Eugene Park, William Gallagher, Sydor Optics, Flint Creek Resources

Articles

Pollution prevention methods were applied at an optics manufacturer in an effort to improve recovery of a valuable polishing component, cerium oxide (ceria), 77% of which was lost to dragout and sewer discharge. Centrifugation and microfiltratiion were evaluated to develop a process that would increase recovery of used ceria, which would then be sent back to the ceria supplier for reclamation and reuse. Full-scale implementation included a high-speed centrifuge that operates continuously with a microfiltration system through recirculation in a single process tank. Sydor Optics has improved ceria recovery from 23% to 48%, saving thousands of dollars annually.

Mid-Ir Optical Refrigeration And Radiation Balanced Lasers, Saeid Rostami

Optical Science and Engineering ETDs

This dissertation reports recent advances in mid-infrared (mid-IR) optical refrigeration and Radiation Balanced Lasers (RBLs). The first demonstration of optical refrigeration in Ho:YLF and Tm:YLF crystals as promising mid-IR laser cooling candidates is reported. Room temperature laser cooling efficiency of Tm- and Ho-doped crystals at different excitation polarization is measured and their external quantum efficiency and background absorption are extracted. Complete characterization of laser cooling samples is obtained via performing detailed low-temperature spectroscopic analysis, and their minimum achievable temperature as well as conditions to achieve laser cooling efficiency enhancement in mid-IR are investigated. By developing a Thulium-doped fiber amplifier, seeded …

Morphology And Structure Of Pb Thin Films Grown On Si (111) By Pulsed Laser Deposition, Bektur Abdisatarov

Masters Theses & Specialist Projects

Pulsed laser deposition (PLD) is a versatile thin film deposition technique in which high powered laser beam interacts with a target material inside an ultrahigh vacuum chamber. Highly energetic particles such as electrons, atoms, protons, and ions generate a plasma plume that directed towards a substrate material where recondenses form a thin film. PLD is an effective and reliable method to create varieties of thin films such as metal, polymer, and ceramic for many technologically essential applications.

In this study, thin Pb films were grown by pulsed laser deposition on Si (111) at various laser fluences, pulse wavelengths, deposition times, …

Enhanced Carrier Transport By Transition Metal Doping In Ws2 Field Effect Transistors, Maomao Liu, Sichen Wei, Simran Shahi, Hemendra Nath Jaiswal, Paolo Paletti, Sara Fathipour, Maja Remskar, Jun Jiao, Wansik Hwang, Fei Yao, Huamin Li

Physics Faculty Publications and Presentations

High contact resistance is one of the primary concerns for electronic device applications of two-dimensional (2D) layered semiconductors. Here, we explore the enhanced carrier transport through metal–semiconductor interfaces in WS₂ field effect transistors (FETs) by introducing a typical transition metal, Cu, with two different doping strategies: (i) a “generalized” Cu doping by using randomly distributed Cu atoms along the channel and (ii) a “localized” Cu doping by adapting an ultrathin Cu layer at the metal–semiconductor interface. Compared to the pristine WS₂ FETs, both the generalized Cu atomic dopant and localized Cu contact decoration can provide a Schottky-to-Ohmic contact …

Experimental Determination Of The (0/−) Level For Mg Acceptors In Β-Ga2O3 Crystals, Christopher A. Lenyk, Timothy D. Gustafson, Sergey A. Basun, Larry E. Halliburton, Nancy C. Giles

Faculty Publications

Electron paramagnetic resonance (EPR) is used to experimentally determine the (0/−) level of the Mg acceptor in an Mg-doped β-Ga₂O₃ crystal. Our results place this level 0.65 eV (±0.05 eV) above the valence band, a position closer to the valence band than the predictions of several recent computational studies. The crystal used in this investigation was grown by the Czochralski method and contains large concentrations of Mg acceptors and Ir donors, as well as a small concentration of Fe ions and an even smaller concentration of Cr ions. Below room temperature, illumination with 325 nm laser light …