Other Materials Science and Engineering Commons^™

Signaling Pathways Activated By Interleukin-2 And Interluekin-4 Receptors Mediate T Lymphocyte Clonal Expansion, Kristen K. Comfort

Chemical and Materials Engineering Faculty Publications

Cells sense and respond to chemical and physical stimuli through signal transduction pathways, which mediate cell proliferation, differentiation, migration, and survival. The cytokines interleukin-2 (IL-2) and interleukin-4 (IL-4) are key regulators of the adaptive immune system, particularly influencing the clonal expansion and differentiation of T cells. At least in culture, both synergistic and antagonistic effects of IL-2 and IL-4 co-stimulation have been reported; the antagonism, when observed, is thought to arise from the utilization of a common subunit shared by IL-2 and IL-4 receptors. We have sought to characterize IL-2 and IL-4 signaling at the level of intracellular pathways activated …

Experimental Study On The Influence Of Foam Porosity And Pore Size On The Melting Of Phase Change Materials, Khalid Lafdi, Osama Mesalam Mesalhy, Shadab Shaikh

Chemical and Materials Engineering Faculty Publications

Experimental study was carried out to study the phase change heat transfer within a composite of phase change material (PCM) infiltrated high thermal conductivity foam. An experimental setup was built to measure the temperature profiles and capture the melting evolution of the PCM inside aluminum foams. Aluminum foams were used as the porous material, and low melting temperature paraffin wax was used as the PCM. It was observed from the results that the system parameters of the wax/foam composite had a significant influence on its heat transfer behavior.

By using higher porosity aluminum foam, the steady-state temperature was reached faster …

Thermal Conductivity Improvement In Carbon Nanoparticle Doped Pao Oil: An Experimental Study, Shadab Shaikh, Khalid Lafdi, Rengasamy Ponnappan

Chemical and Materials Engineering Faculty Publications

The present work involves a study on the thermal conductivity of nanoparticle-oil suspensions for three types of nanoparticles, namely, carbon nanotubes(CNTs), exfoliated graphite (EXG), and heat treated nanofibers (HTT) with PAO oil as the base fluid. To accomplish the above task, an experimental analysis is performed using a modern light flash technique (LFA 447) for measuring the thermal conductivity of the three types of nanofluids, for different loading of nanoparticles.

The experimental results show a similar trend as observed in literature for nanofluids with a maximum enhancement of approximately 161% obtained for the CNT-PAO oil suspension. The overall percent enhancements …

Effect Of Carbon Nanofiber Heat Treatment On Physical Properties Of Polymeric Nanocomposites—Part I, Khalid Lafdi, William Fox, Matthew Matzek, Emel Yildiz

Chemical and Materials Engineering Faculty Publications

The definition of a nanocomposite material has broadened significantly to encompass a large variety of systems made of dissimilar components and mixed at the nanometer scale. The properties of nanocomposite materials also depend on the morphology, crystallinity, and interfacial characteristics of the individual constituents. In the current work, vapor-grown carbon nanofibers were subjected to varying heat-treatment temperatures.

The strength of adhesion between the nanofiber and an epoxy (thermoset) matrix was characterized by the flexural strength and modulus. Heat treatment to 1800C∘ demonstrated maximum improvement in mechanical properties over that of the neat resin, while heat-treatment to higher temperatures demonstrated a …

Oxygen Plasma Treatment And Deposition Of Cnx On A Fluorinated Polymer Matrix Composite For Improved Erosion Resistance, Christopher Muratore, Andras Korenyi-Both, John E. Bultman, A. R. Waite, John G. Jones, T. M. Storage, Andrey A. Voevodin

Chemical and Materials Engineering Faculty Publications

The use of polymer matrix composites in aerospace propulsion applications is currently limited by insufficient resistance to erosion by abrasive media. Erosion resistant coatings may provide necessary protection; however, adhesion to many high temperature polymer matrix composite (PMC) materials is poor. A low pressure oxygen plasma treatment process was developed to improve adhesion of CNx coatings to a carbon reinforced, fluorinated polymer matrix composite. Fullerene-like CNx was selected as an erosion resistant coating for its high hardness-to-elastic modulus ratio and elastic resilience which were expected to reduce erosion from media incident at different angles (normal or glancing) relative to the …

Synthesis, Structure, And Electronic And Physical Properties Of Tl2tes3, The First Characterized Thallium(I) Thiotellurate(Iv), Anja V. Mudring, Franziska Rieger

Anja V. Mudring

The crystal structure of Tl2TeS3 (orthorhombic, Pnma, No. 62, Z = 4, Pearson code oP24, a = 815.5(2) pm, b = 1352.6(6) pm, c = 596.48(15) pm, 600 unique reflections with Io > 2σ(Io), R1 = 0.0541, wR2 = 0.0997, GOF = 0.891, T = 298(2) K) in a new structure type has been determined. It can be understood as a LaI2-like arrangement of thallium cations and thiotellurite anions TeS32-. With a direct band gap of 1.61 eV and an indirect band gap of 0.9 eV, Tl2TeS3 is a new material that might be useful for thermoelectrical applications. The materials band …

Phase Transition In Tl2teo3:  Influence And Origin Of The Thallium Lone Pair Distortion, Anja V. Mudring, Franziska Rieger

Anja V. Mudring

A new modification of thallium tellurite, β-Tl2TeO3, has been synthesized by methanolothermal reaction, and its phase transition has been studied by single-crystal X-ray diffraction. At a temperature of 440(10) °C an irreversible phase transition from a monoclinic structure (β-Tl2TeO3:  P21/c (No. 14), Z = 4, a = 8.9752(18) Å, b = 4.8534(6) Å, c = 11.884(2) Å, β = 109.67(2)°, V = 487.47(15) Å3 at 25 °C) to an orthorhombic structure (α-Tl2TeO3:  Pban (No. 50), Z = 8, a = 16.646(2) Å, b = 11.094(2) Å, c = 5.2417(8) Å, V = 968.0(3) Å3 at 25 °C) is observed. Both …

Ionic Liquids With Perfluorinated Alkoxyaluminates, Tudor Timofte, Anja V. Mudring, Slawomir Pitula

Anja V. Mudring

Ionic liquids with the weakly coordinating perfluoroalkoxyaluminate anions, Al(ORF)4-, are obtained by a metathesis reaction of LiAl(ORF)4 and [bmim]Cl or [bmpyr]Cl in high yields. The compounds [bmim][Al(hfip)4] and [bmpyr][Al(hfip)4] have surprisingly low viscosities at elevated temperatures (60 °C) and an exceptionally high electrochemical window, which might render them useful for certain applications.

Interfacial And Capillary Pressure Effects On The Thermal Performance Of Wax/Foam Composites, Mohammad Rajab Almajali, Khalid Lafdi, Shadab Shaikh

Chemical and Materials Engineering Faculty Publications

A numerical investigation study was performed to study the phase change behavior of wax/foam composite encapsulated in an aluminum casing. Two types of foam materials, namely, aluminum and carbon, were infiltrated with paraffin wax. The progress of melt interface and temperature distribution within the encapsulated composite was analyzed using computational fluid dynamics software (CFD). A two-energy equation model was implemented in the CFD software through the use of user-defined function (UDF). Interfacial effects influencing the heat transfer process at the casing-composite junction and between the wax-foam surfaces within the composite were addressed through the use of separate UDF. In addition, …