Metallurgy Commons^™

Fishing Catch And Catch Rate Assesment Of Mini Trawl, Trapnet And Setnet Fisheries, Muhammad Firdaus

Makara Journal of Technology

Fishing Catch and Catch Rate Assesment of Mini Trawl, Trapnet and Setnet Fisheries. This paper is aimed at assessing fishing catch and catch rate of the dragged gear on shrimp, trapnet, and setnet fisheries in Tarakan. The catch and effort data (number and species) and the fishing time of captured units were used in this qualitative analysis of fishing catch and catch rate to describe catch composition and catch rate from three catch fishery units in Tarakan. The result of the research shows that in the catching operation the dragged gear on shrimp has two main catch targets, which are …

Ontology-Based Automatic Classification For News Articles In Indonesian Language, Prajna Wira Basnur, Dana Indra Sensuse

Makara Journal of Technology

Ontology-Based Automatic Classification for News Articles in Indonesian Language. Searching specific information will be difficult if relying only on query. Choosing less specific queries will result in a lot of irrelevant information fetched by the system. One of the most successful ways to overcome this problem is to perform document classification based on the topic. There are many methods that can be used to conduct such a classification, such as using statistical and machine learning approaches. However, those document classification methods require training the data or learning the documents. In this study, the authors attempted to classify documents using a …

Particle Filter With Binary Gaussian Weighting And Support Vector Machine For Human Pose Interpretation, Indah Agustien, Muhammad Rahmat Widyanto, Sukmawati Nur Endah, Tarzan Basaruddin

Makara Journal of Technology

This paper proposes human pose interpretation using particle filter (PF) with Binary Gaussian Weighting and support vector machine (SVM). In the proposed system, particle filter is used to track a human object, then this human object is skeletonized using thinning algorithm and classified using SVM. The classification is to identify human pose, whether it is normal or abnormal behavior. Here particle filter is modified through weight calculation using Gaussian distribution to reduce the computational time. The modified particle filter consists of four main phases. First, particles are generated to predict target’s location. Second, the weight of certain particles is calculated …

Maintenance Activity Planning By Reability Centered Maintenance Ii Method, Rachmad Hidayat, Nachnul Ansori, Ali Imron

Makara Journal of Technology

Maintenance Activity Planning by Reability Centered Maintenance II Method. This research discusses maintenance activity planning using the RCM II method to evaluate failure function risk on compresor screw. The calculation of maintenance time is performed by considering maintenance and repair costs. The risk evaluation result with RPN shows that the critical component that needs to get the main priority in applying maintenance on compresor screw is function disorder on timeworn piston and on the broken outgoing air sponge’s filter that receives RPN 45. The optimum maintenance time calculation is applied on components that undergo scheduled restoration and scheduled discard task …

Software Design Of Mobile Antenna For Auto Satellite Tracking Using Modem Correction And Elevation Azimuth Method, Djamhari Sirat, Muhamad Asvial, Arman Djohan Diponegoro, Himawan Sidharta

Makara Journal of Technology

Software Design of Mobile Antenna for Auto Satellite Tracking Using Modem Correction and Elevation Azimuth Method. Pointing accuracy is important in satellite communication. Because the satellite’s distance to the surface of the earth's satellite is so huge, 1 degree of pointing error will make the antenna unable to send data to satellites. To overcome this, the auto-tracking satellite controller is made. This system uses a microcontroller as the controller, with the GPS as the location indicator of the antenna, a digital compass as the beginning of antenna pointing direction, a rotary encoder as azimuth and elevation censor, and a modem …

Petroleum Degradation In Soil By Thermophilic Bacteria With Biopile Reactor, Astri Nugroho, Edison Effendi, Yulius Karonta

Makara Journal of Technology

Crude oil degradation has been carried out using biopile reactor in total petroleum hydrocarbon (TPH) concentration of 5%, 10% and 15%. The thermophilic microorganisms used from isolation result and identification are Aeromonas salmonicida, Bacillus pantothenticus, and Stenotrophomonas maltophilia. The biodegradation of biopile reactor is done by various concentrations of TPH, total plate count (TPC), and volatile suspended solid (VSS) per day for 30 days. The biodegradation of kinetic parameter calculated consists of μ, μm, Y, Yt, Yobs, Kd, Ks from TPH concentration decision, and TPC and VSS in every microorganism with t (observation time) of 0 hour to 168 hours. …

Ergonomic Analysis Of Ui’S Bicyclesusing Posture Evaluation Index (Pei) Method In Virtual Environment, Erlinda Muslim, Boy Nurtjahyo, Zulkarnain Zulkarnain, Liza Afrinotha

Makara Journal of Technology

Ergonomic Analysis of UI’s Bicycles Using Posture Evaluation Index (PEI) Method in Virtual Environment. This research was conducted to study the ergonomic aspect of University of Indonesia’s bicycles in virtual environment. Software Jack 6.0 was used to analyze it. PEI was used as an approach that integrated the results of three methods: lower back analysis (LBA), ovako working posture analysis (OWAS), and rapid upper limb assessment (RULA). The research objective is to evaluate the existing design of University of Indonesia’s bicycles and to determine the most ergonomic redesign which concerns handlebar height and saddle height modification. The result showed that …

Hard Collisions In Rubidium Using Sub-Doppler Spectroscopy, Douglas E. Thornton

Theses and Dissertations

To better understand the laser kinetics of an alkali gain medium, hard collisions, or velocity-changing collisions, has been studied and a velocity-changing collisional rate has been calculated. Previous works have studied these collisions, but no rate has been calculated. Using the precise tool of sub-Doppler spectroscopy, atomic hard collisions can be observed. The collected spectra are fitted with two different line shapes to demonstrate the accuracy of this method. From the fits, the number of hard collisions can be extracted. The time scale of the hard collisions in rubidium is interpolated by varying the chopping frequency of the pump beam, …

Rubidium Recycling In A High Intensity Short Duration Pulsed Alkali Laser, Wooddy S. Miller

Theses and Dissertations

Laser induced fluorescence was used to study how pump pulse duration and alkali recycle time effects maximum power output in a Diode Pumped Alkali Laser (DPAL) system. A high intensity short pulsed pump source was used to excited rubidium atoms inside a DPAL-type laser. The maximum output power of the laser showed a strong dependence upon the temporal width of the pump pulse in addition to the input pump intensity. A linear relationship was observed between the maximum output power and the pulse width due to the effective lifetime of the excited state, defined as the time it takes for …

Functionally Graded Materials By Laser Metal Deposition (Preprint), Syamala R. Pulugurtha, Joseph William Newkirk, Frank W. Liou, Hsin-Nan Chou

Materials Science and Engineering Faculty Research & Creative Works

Fabrication of functionally graded materials (FGMs) by laser metal deposition (LMD) has the potential to offer solutions to key engineering problems over the traditional metalworking techniques. But the issues that need to be addressed while building FGMs are intermixing in the layers and cracking due to the residual stresses. This paper is to present the study of the effect of process parameters (laser power and travel speed) on the degree of dilution between the substrate (or, previous layer) and powder material for few metallurgical systems.

Effect Of Friction Stir Processing On Fatigue Behavior Of An Investment Cast Al-7si-0.6 Mg Alloy, S. Jana, Rajiv S. Mishra, J. B. Baumann, G. Grant

Materials Science and Engineering Faculty Research & Creative Works

Cast aluminum alloys in general show poor fatigue performance due to the presence of defects. Friction stir processing (FSP) can be used as a tool to enhance the mechanical properties of cast alloys by eliminating such defects. in the present study FSP led to a five times improvement in fatigue life of an investment cast Al-7Si-0.6 Mg hypoeutectic alloy. the reason for such an enhancement was linked to the closure of casting porosities, which acted as crack nucleation sites in the as cast condition. Porosities acted as notches in the as cast alloy and led to an order of magnitude …

Electrodeposition Of Tin Using Tin (Ii) Methanesulfonate From Mixture Of Ionic Liquid And Methane Sulfonic Acid., Yang Kok Kee

Student Works (2010-2019)

The electrodeposition of tin from Tin(II) Methane Sulfonate (MSA) with varying concentration in air and water stable 1-butyl-1-methyl-pyrrolidinium trifluoromethanesulfonate, (BMPOTF) ionic liquid at room temperature was studied. Cyclic Voltammetry served to characterize the electrochemical behavior of tin reduction and oxidation. The diffusion coefficient of stannous ions in the mixture of BMPOTF ionic liquid and MSA based electrolyte obtained via Randles-Sevcik and Cottrell equation was 2 × 10-7 cm2/s. Electroplating on copper panel was conducted under different current densities to determine BMPOTF based tin plating solution current efficiency. Mixture of BMPOTF and MSA based tin plating solution gave current efficiency as …

Electrodeposition Of Tin Using Tin(Ii) Methanesulfonate From Mixture Of Ionic Liquid And Methane Sulfonic Acid., Yang Kok Kee

Student Works (2010-2019)

The electrodeposition of tin from Tin(II) Methane Sulfonate (MSA) with varying concentration in air and water stable 1-butyl-1-methyl-pyrrolidinium trifluoromethanesulfonate, (BMPOTF) ionic liquid at room temperature was studied. Cyclic Voltammetry served to characterize the electrochemical behavior of tin reduction and oxidation. The diffusion coefficient of stannous ions in the mixture of BMPOTF ionic liquid and MSA based electrolyte obtained via Randles-Sevcik and Cottrell equation was 2 × 10-7 cm2/s. Electroplating on copper panel was conducted under different current densities to determine BMPOTF based tin plating solution current efficiency. Mixture of BMPOTF and MSA based tin plating solution gave current efficiency as …

Controlling Strength And Permeability Of Silica Investment Casting Molds, Darryl M. Kline

Masters Theses

"Investment casting is a metal casting process in which a ceramic mold is created around a disposable pattern using dip coating. The fine silica flour making up most of the mold gives the benefits of a smooth internal mold surface and high density. The high density allows for investment casting molds to be thinner and lighter than sand-based molds, but gives substantially smaller gaps between particles for air flow. This research focused on the design and improvement of the formulation for making investment casting molds with customizable physical properties. Properties of the molds, specifically flexural strength, permeability, and physical structure, …

Foundry Parameters For Casting High-Aluminum Lightweight Steel In Complex Shapes, Angella Marie Schulte

Masters Theses

"This work investigated the liquid metal treatment and molding practices for Fe- 30wt.%Mn-9wt.%Al-1wt.%Si-0.9wt.%C-0.5wt.%Mo steel. The goal of this research was to determine the process conditions that would produce a tough Fe-Mn-Al-C alloy and the appropriate mold design to produce a defect-free P900 plate.

Notch toughness of age-hardenable Fe-Mn-Al-C alloys decreases as phosphorus increases. Thermodynamic calculations and experimental work show that additions of Ca followed by Ce can be used to mitigate the deleterious effects of phosphorus, and the addition of Ar-stirring can be used to decrease the number of harmful aluminum nitride inclusions. In the solution-treated and aged condition (Brinell …

Evaluation Of Alternative Methods For Surface Preparation And Deposition Of Cerium-Based Conversion Coatings On Aluminum Alloys, William J. Gammill

Masters Theses

"This thesis investigates alternative surface preparation and deposition methods for cerium-based conversion coatings (CeCC) on high strength aluminum alloys. Cerium-based conversion coatings are being investigated as a more environmentally friendly replacement for chromium-based conversion coatings. Currently, the alloys are immersed in strong alkaline and acidic solutions to prepare the aluminum surfaces for conversion coating, in which immersion may not be suitable for all situations. Alternatives to this method were investigated, including wipe application of solution, ultrasonic processing in deionized water, and abrasive blasting with alumina. AI 7075-T6 test panels were prepared using each of these methods and compared to a …

Influence Of Fraction Of High Angle Boundaries On The Mechanical Behavior Of An Ultrafine Grained Al-Mg Alloy, R. Kapoor, N. Kumar, R. S. Mishra, C. S. Huskamp, K. K. Sankaran

Materials Science and Engineering Faculty Research & Creative Works

The mechanical behavior of ultrafine grained AA5052 processed through different techniques-rolled, annealed, friction stir processed (FSP) and equal channel angular pressed (ECAP)-were compared and correlated with microstructure. the microstructure was characterized using electron back scattered diffraction to obtain the boundary spacing, the fraction of high angle boundaries and to estimate the dislocation density from local misorientations. Both FSP and ECAP conditions had ultrafine boundary spacing, but the fraction of high angle boundaries was larger for the FSP condition. Tensile deformation carried out at 297K, and 10-3s-1 showed a lower work-hardening rate and recovery rate for FSP as compared to the …

Friction Stir Processing Of Commercial Grade Marine Alloys To Enable Superplastic Forming, Christopher B. Smith, Arun Mohan, Rajiv S. Mishra, Murray Mahoney, Mike Miles, Scott M. Gillis, Lee M. Cerveny, Gerald Opichka

Materials Science and Engineering Faculty Research & Creative Works

The use of friction stir processing (FSP) on marine grade aluminum sheet has been investigated with the objective of locally enhancing the material properties. This can potentially allow low-cost commercial grade aluminum to be used in superplastic forming applications or further enhance the formability to allow more complex geometries to be formed. FSP has been demonstrated to enable super plasticity (uniform elongations >250%) in 5083-H116 over a range of friction stir processing conditions. © (2010) Trans Tech Publications.

An Analysis Of Strength And Ductility Of Ultrafine Grained Al Alloys, R. Kapoor, P. S. De, R. S. Mishra

Materials Science and Engineering Faculty Research & Creative Works

This paper brings together and compares data of various ultrafine grained (UFG) Al alloys processed through different routes. in general, the trend of decreasing ductility with increasing strength was observed for the UFG alloys. as compared to the coarse grained (CG) alloys, the UFG alloys show a lower ductility, a lower extent of work-hardening and a lower uniform elongation. Unlike the CG alloys, which show a large fraction of uniform to total elongation, in UFG alloys this fraction varies with processing technique. It is shown here that aging of some UFG Al alloys improves ductility. Further, it is shown that …

Factors Controlling Ductility In Ultrafine Grain Aluminum Alloys Under Monotonic And Cyclic Loading, Partha Sarathi De

Doctoral Dissertations

"Ultrafine grained (UFG) Al processed by severe plastic deformation (SPD) methods are characterized by high strength and a limited uniform ductility. Friction stir processing (FSP), an offshoot of friction stir welding has emerged as a new technique to produce UFG alloys. FSP-UFG Al alloys show a distinctly different behavior with higher uniform elongation and improved high cycle fatigue life as compared to other SPD processed variants. The objective of this work was to study the microstructural basis for such mechanical behavior in FSP-UFG Al alloys.

To study the mechanical behavior of FSP Al alloys, a subsize bending fatigue and uniaxial …

Characterization Of Diamond Thin Films And Related Materials, Travis K. Mckindra

Doctoral Dissertations

"Thin carbon films including sputtered deposited graphite and CO₂ laser-assisted combustion-flame deposited graphite and diamond thin films were characterized using optical and electron microscopy, X-ray diffraction and micro-Raman spectroscopy. Amorphous carbon thin films were deposited by DC magnetron sputtering using Ar/O₂ gases. The film morphology changed with the oxygen content. The deposition rate decreased as the amount of oxygen increased due to oxygen reacting with the growing film. The use of oxygen in the working gas enhanced the crystalline nature of the films. Graphite was deposited on WC substrates by a CO₂ laser-assisted O₂/C₂H₂ combustion-flame method. Two distinct microstructural areas …

Dependency Of Machinability In Gray Cast Iron On Nitride-Induced Age Strengthening, Jared Teague

Doctoral Dissertations

"Work of previous researchers has suggested that room temperature age strengthening in gray cast irons improves machinability. Verification and quantification of the machinability improvement is important to industry. Improved machinability will reduce overall manufacturing costs and reduce raw material consumption by decreasing the rate at which tools are replaced. Experimental work was performed to determine a connection between improved machinability in gray cast iron and changes in machining mechanics. An industrial tool wear study verified that age strengthening improved machinability by reducing tool wear to less than one-quarter of the unaged value. Laboratory tests on iron castings from the same …

Understanding Corrosion Of Ni₃(Si,Nb) Alloys In Hot Sulfuric Acid, Jen-Hsien Hsu

Doctoral Dissertations

"The Sulfur-Iodine thermochemical cycle has been proposed as a method for producing large quantities of hydrogen gas from water. However, the extreme operating environments involved limit the possible materials for construction.

Through proper heat treatment and composition control, the modified patented Ni₃(Si,Nb) alloy keeps high temperature strength to greater than 750⁰C and can be deformed by cold rolling more than 50% using multiple passes and intermediate anneals. The corrosion resistance is reproducible and maintains less than 5 mpy for a broad range of boiling sulfuric acid concentrations, including 70 wt%.

In the boiling 70 wt% sulfuric acid corrosion tests, kinetic …

Fluid Flow Related Phenomena And Inclusion Motion In Continuous Casting Strands, Yufeng Wang

Doctoral Dissertations

"To improve the efficiency of the continuous casting process and the quality of its products, this dissertation mainly investigated fluid flow related phenomena and inclusion motion in continuous casting. Mathematical simulation was performed for this purpose. Both a slab caster and a billet caster were investigated. In the study of the slab caster, the application of electromagnetic brake field on the slab mold was evaluated. The results indicated that the magnetic force decelerated the high speed steel jet, stabilized the top fluctuation, and prevented the bias flow inside the mold. The other study of this slab caster involved the fluid …