Open Access. Powered by Scholars. Published by Universities.®
- Publication
- Publication Type
Articles 1 - 10 of 10
Full-Text Articles in Ceramic Materials
Hardness Of (Hf,Ti,W,Zr)B2/(Hf,Ti,W,Zr)C-Based Ceramics With Varying Wb Content, Suzana Filipović, William G. Fahrenholtz, Gregory E. Hilmas, Nina Obradović, Stefano Curtarolo
Hardness Of (Hf,Ti,W,Zr)B2/(Hf,Ti,W,Zr)C-Based Ceramics With Varying Wb Content, Suzana Filipović, William G. Fahrenholtz, Gregory E. Hilmas, Nina Obradović, Stefano Curtarolo
Materials Science and Engineering Faculty Research & Creative Works
Compositionally complex (Hf,Ti,Zr,W)B2/(Hf,Ti,Zr,W)C-based ceramics were produced with different boride and carbide phase contents by varying the C/B4C molar ratio used in boro/carbothermal reduction. A monoboride phase based on WB was detected in all compositions. As the C/B4C ratio was varied, the WB content decreased from 23.7 vol% for a C/B4C ratio of 6.0–15.3 vol% for a C/B4C ratio of 10.3. Further increases in the C/B4C ratio increased the WB content. The monoboride phase contained mainly W and Ti in a solid solution with the nominal composition of (W …
Thermomechanical And Thermal Characterization Of Pressureless Sintered Tib2, Simone Taraborelli, Simone Failla, Diletta Sciti, Steven M. Smith, Jeremy Watts, William G. Fahrenholtz, Greg E. Hilmas
Thermomechanical And Thermal Characterization Of Pressureless Sintered Tib2, Simone Taraborelli, Simone Failla, Diletta Sciti, Steven M. Smith, Jeremy Watts, William G. Fahrenholtz, Greg E. Hilmas
Materials Science and Engineering Faculty Research & Creative Works
The impact of high-energy milling using WC[sbnd]Co media on the pressureless sintering and properties of TiB2 was studied. After 30 mins of milling, samples sintered at 2200 °C achieved a high relative density (>98 %) and a fine mean grain size (<2 >µm). In the microstructure WxBy phases, often containing Co, were observed at triple points, due to contamination from the milling media. Moreover, core-rim structures with multiple rims were detected: the cores consisted of pure TiB2 grains, the rims were (TixWy)B2 solid solutions. The core-rim formation was significantly more pronounced compared to a reference sample of …
Synthesis And Properties Of (Hf,Mo,Ti,W,Zr)B2–(Hf,Mo,Ti,W,Zr)C Dual Phase Ceramics, S. Filipović, S. M. Smith, G. Hilmas, W. Fahrenholtz, N. Obradović, S. Curtarolo
Synthesis And Properties Of (Hf,Mo,Ti,W,Zr)B2–(Hf,Mo,Ti,W,Zr)C Dual Phase Ceramics, S. Filipović, S. M. Smith, G. Hilmas, W. Fahrenholtz, N. Obradović, S. Curtarolo
Materials Science and Engineering Faculty Research & Creative Works
Dense, dual phase (Hf,Mo,Ti,W,Zr)B2–(Hf,Mo,Ti,W,Zr)C ceramics were synthesized with varying contents of Mo and W. The final (Hf0.317Mo0.025Ti0.317W0.025Zr0.317)C–(Hf0.317Mo0.025Ti0.317W0.025Zr0.317)B2 was a nominally pure, dual phase ceramic, while compositions with higher amounts of Mo and W contained multiple phases. The final microstructures had submicron grains due to pinning effects. Vickers hardness values were up to 48.6 ± 2.2 GPa for an applied load of 0.49 N for the ceramic with optimized composition and densification. The solubility limits for Mo and …
Impact Of Tib2 Source On The Microstructure And Properties Of Tib2–Sic–B4c Ceramics, Steven M. Smith, Suzana Filipovic, William G. Fahrenholtz, Gregory E. Hilmas, Carlo Baldisserri, Laura Silvestroni
Impact Of Tib2 Source On The Microstructure And Properties Of Tib2–Sic–B4c Ceramics, Steven M. Smith, Suzana Filipovic, William G. Fahrenholtz, Gregory E. Hilmas, Carlo Baldisserri, Laura Silvestroni
Materials Science and Engineering Faculty Research & Creative Works
To date, the thermal and electrical properties of three-phase ceramics containing a boride phase, silicon carbide, and boron carbide have not been studied in detail. Further, the effect of the source of the boride powder has also not been investigated. This study produced three-phase ceramics containing titanium diboride, silicon carbide, and boron carbide using three different TiB2 sources: commercial powder, TiB2 synthesized by boro/carbothermal reduction, or (Ti,Cr)B2 synthesized by boro/carbothermal reduction to address the effect of the TiB2 source. Ceramics containing synthesized TiB2 or (Ti,Cr)B2 reached >99% relative density, while the ceramic produced from …
Spark Plasma Sintering Of Magnesium Titanate Ceramics, Suzana Filipović, Nina Obradović, William G. Fahrenholtz, Steven Smith, Miljana Mirković, Adriana Peleš Tadić, Jovana Petrović, Antonije Đorđević
Spark Plasma Sintering Of Magnesium Titanate Ceramics, Suzana Filipović, Nina Obradović, William G. Fahrenholtz, Steven Smith, Miljana Mirković, Adriana Peleš Tadić, Jovana Petrović, Antonije Đorđević
Materials Science and Engineering Faculty Research & Creative Works
Magnesium titanate ceramics were prepared by reactive spark plasma sintering (SPS) at 1200 °C for 5 min. Prior to sintering, MgO and TiO2 powders were mixed by high energy ball milling (HEBM) for 15, 30, or 60 min. The effect of milling time on phase composition was analyzed by X-ray diffraction (XRD) for milled powders and sintered specimens. The morphology of the sintered ceramics was investigated by scanning electron microscopy (SEM), while elemental distribution was determined by energy dispersive spectroscopy (EDS). The presence of the MgTi2O5 phase was detected in XRD and was confirmed by EDS analysis. Microcracking was …
A Super-Hard High Entropy Boride Containing Hf, Mo, Ti, V, And W, Suzana Filipovic, Nina Obradovic, Greg E. Hilmas, William G. Fahrenholtz, Donald W. Brenner, Jon Paul Maria, Douglas E. Wolfe, Eva Zurek, Xiomara Campilongo, Stefano Curtarolo
A Super-Hard High Entropy Boride Containing Hf, Mo, Ti, V, And W, Suzana Filipovic, Nina Obradovic, Greg E. Hilmas, William G. Fahrenholtz, Donald W. Brenner, Jon Paul Maria, Douglas E. Wolfe, Eva Zurek, Xiomara Campilongo, Stefano Curtarolo
Materials Science and Engineering Faculty Research & Creative Works
Super-Hard (Hf,Mo,Ti,V,W)B2 Was Synthesized by Boro-Carbothermal Reduction and Densified by Spark Plasma Sintering. This Composition Was Produced for the First Time as a Single-Phase Ceramic in the Present Research. the Optimized Ceramic Had a Single Hexagonal AlB2-Type Crystalline Phase with a Grain Size of 3.8 µm and Homogeneous Distribution of the Constituent Metals. the Vickers Hardness Exhibited the Indentation Size Effect, Increasing from 27 GPa at a Load of 9.8 N to as High as 66 GPa at a Load of 0.49 N. This is the Highest Hardness Reported to Date for High Entropy Boride Ceramics.
Synergistic Hardening In A Dual Phase High-Entropy (Hf,Nb,Ta,Ti,Zr)C–(Hf,Nb,Ta,Ti,Zr)B2 Ultra-High Temperature Ceramic, Rubia Hassan, William G. Fahrenholtz, Gregory E. Hilmas, Stefano Curtarolo
Synergistic Hardening In A Dual Phase High-Entropy (Hf,Nb,Ta,Ti,Zr)C–(Hf,Nb,Ta,Ti,Zr)B2 Ultra-High Temperature Ceramic, Rubia Hassan, William G. Fahrenholtz, Gregory E. Hilmas, Stefano Curtarolo
Materials Science and Engineering Faculty Research & Creative Works
A dual phase high-entropy (Hf,Nb,Ta,Ti,Zr)C–(Hf,Nb,Ta,Ti,Zr)B2 ultra-high temperature ceramic was synthesized using a single step boro-carbothermal reduction route. The synthesized powder was densified by spark plasma sintering at 2000°C, resulting in complete solid solution formation and a relative density of ≈99%. The dual phase ceramic was 43 vol% high-entropy carbide and 57 vol% high-entropy boride. The grain sizes were 0.85 ± 0.34 µm for the carbide and 0.87 ± 0.33 µm for the boride with minimal residual oxide (0.2 vol%) detected in the microstructure. The resulting composition had a higher microhardness than the individual boride and carbide ceramics across the range …
Bipolar Hipims Kick-Pulse For High Hardness In High-Entropy Boride Thin Films, Nathaniel S. Mcilwaine, Nestor O.Marquez Rios, Eva Zurek, Donald W. Brenner, William G. Fahrenholtz, Stefano Curtarolo, Douglas E. Wolfe, Jon Paul Maria
Bipolar Hipims Kick-Pulse For High Hardness In High-Entropy Boride Thin Films, Nathaniel S. Mcilwaine, Nestor O.Marquez Rios, Eva Zurek, Donald W. Brenner, William G. Fahrenholtz, Stefano Curtarolo, Douglas E. Wolfe, Jon Paul Maria
Materials Science and Engineering Faculty Research & Creative Works
We report a microhardness indentation study for multicomponent refractory metal boride thin films that belong to the family of high-entropy ceramics exhibiting superior hardness and high temperature properties. We focus on the nominally equimolar composition (Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2) B2, which we refer to as HEB3, on c-plane sapphire substrates. Thin films are prepared using bipolar high power impulse magnetron sputtering (HiPIMS), where the positive kick pulse is optimized to produce films with high density, high crystallinity, and a microstructure that is isometric in nature as revealed by cross-sectional fracture surface imaging, X-ray diffraction, and X-ray reflectometry. Low-load Knoop indentation is used to …
Mechanical Properties Of Zrb2 Ceramics Determined By Two Laboratories, Jeffrey J. Swab, Jecee Jarman, William Fahrenholtz, Jeremy Lee Watts
Mechanical Properties Of Zrb2 Ceramics Determined By Two Laboratories, Jeffrey J. Swab, Jecee Jarman, William Fahrenholtz, Jeremy Lee Watts
Materials Science and Engineering Faculty Research & Creative Works
The mechanical properties for zirconium diboride (ZrB2) were measured at two laboratories and compared. Two billets of ZrB2 were prepared by hot-pressing commercial powder. The relative densities of the billets were >99% and with an average grain size of 5.9 ± 4.5 µm. Both laboratories prepared American Society for Testing and Materials (ASTM) C1161 B-bars for strength and ASTM C1421 bars with notch configuration A for fracture toughness. Specimens were machined by diamond grinding at the Army Research Laboratory (ARL) and electrical discharge machining (EDM) at Missouri S&T. Strength bars tested at Missouri S&T were polished to a.25 μm finish …
Raman Spectroscopy Of The Skeleton Of The Coral Acropora Cervicornis, Zachary C. Shepard
Raman Spectroscopy Of The Skeleton Of The Coral Acropora Cervicornis, Zachary C. Shepard
Honors Undergraduate Theses
Coral reefs are an important element of marine ecosystem that are critical to maintain a healthy environment. Unfortunately, in recent years coral reefs are doing poorly and many in parts of the ocean are simply dying. Therefore, study of coral’s structural response to external loads could answer what will happen with their structures, while they exhibit different types of loading. Therefore, the proposition of using in-situ micro-Raman spectroscopy to study skeletons of Acropora cervicornis was used. Coral skeleton samples I subjected to mechanical loading studied their vibrational properties by exciting the material with 532nm visible light. A uniaxial compressive load …