Open Access. Powered by Scholars. Published by Universities.®
- Discipline
-
- Mechanical Engineering (7)
- Other Materials Science and Engineering (6)
- Electrical and Computer Engineering (4)
- Manufacturing (4)
- Aerospace Engineering (2)
-
- Chemical Engineering (2)
- Energy Systems (2)
- Metallurgy (2)
- Physical Sciences and Mathematics (2)
- Physics (2)
- Polymer and Organic Materials (2)
- Power and Energy (2)
- Architectural Engineering (1)
- Architecture (1)
- Atomic, Molecular and Optical Physics (1)
- Biochemical and Biomolecular Engineering (1)
- Biomaterials (1)
- Biomedical Engineering and Bioengineering (1)
- Civil and Environmental Engineering (1)
- Condensed Matter Physics (1)
- Dentistry (1)
- Engineering Physics (1)
- Engineering Science and Materials (1)
- Heat Transfer, Combustion (1)
- Mechanics of Materials (1)
- Medicine and Health Sciences (1)
- Nanoscience and Nanotechnology (1)
- Institution
- Keyword
-
- Mechanical properties (4)
- Ultra-High Temperature Ceramics (4)
- Additive Manufacturing (3)
- Anisotropic Thermal Expansion (3)
- Borides (3)
-
- Coffee-Ring Effect (3)
- Direct Ink Writing (3)
- Electrical Conductivity (3)
- High-Entropy Ceramics (3)
- Printability (3)
- Rheology (3)
- Spark Plasma Sintering (3)
- Synchrotron Diffraction (3)
- Thermal Conductivity (3)
- Thermal Expansion (3)
- Titanium Diboride (3)
- ZrB 2 (3)
- Back propagation (2)
- Densification (2)
- Dissertations, Academic -- UNF -- Engineering (2)
- Lath and nail method (2)
- Modeling erosion coefficients (2)
- Regression (2)
- Simulation (2)
- Strength (2)
- Thesis (2)
- UNF (2)
- University of North Florida (2)
- Activation energy (1)
- Additive manufacturing (1)
- Publication
-
- Materials Science and Engineering Faculty Research & Creative Works (20)
- Mathematics and Statistics Faculty Research & Creative Works (3)
- Graduate Theses, Dissertations, and Problem Reports (ETD) (2)
- Theses and Dissertations (2)
- Theses and Dissertations--Chemical and Materials Engineering (2)
-
- UNF Graduate Theses and Dissertations (2)
- All Dissertations (1)
- All Theses (1)
- Doctoral Dissertations (1)
- Electrical and Computer Engineering Faculty Research & Creative Works (1)
- Graduate Theses/Dissertations (1)
- Graduate Thesis and Dissertation 2023-2024 (1)
- LSU Doctoral Dissertations (1)
- Master's Theses (1)
- NASA-Missouri Space Grant Consortium (1)
- PSMRC Faculty Research (1)
- Theses and Dissertations--Manufacturing Systems Engineering (1)
- Publication Type
Articles 31 - 42 of 42
Full-Text Articles in Ceramic Materials
Oxidation Behavior Of Nb-Coated Zirconium Diboride, Jan E. Förster, William Fahrenholtz, Gregory E. Hilmas, Ravisankar Naraparaju
Oxidation Behavior Of Nb-Coated Zirconium Diboride, Jan E. Förster, William Fahrenholtz, Gregory E. Hilmas, Ravisankar Naraparaju
Materials Science and Engineering Faculty Research & Creative Works
Metallic Nb-Coatings Were Deposited on Top of ZrB2 by Means of Magnetron Sputtering to Improve its Oxidation Resistance. High Temperature Oxidation Tests Have Revealed that the Metallic Nb-Coatings Lead to the Formation of a Dense Solid and Protective Reaction Zone in Addition to a More Stable B2O3 Liquid Solution at the Surface. Compared to Baseline ZrB2, a Reduction in the Oxidation Kinetics, as Well as the Thickness of the Porous Zirconia Layer by 71%, Has Been Achieved with the Help of Nb-Coatings. a Liquid Phase Sintering by Molten Nb2O5 Mechanism Was …
High Temperature Confocal Scanning Laser Microscopy Analysis Of Dead-Burned Magnesia Aggregates, Tyler Richards, Viraj Athavale, Jeffrey D. Smith, Ronald J. O'Malley
High Temperature Confocal Scanning Laser Microscopy Analysis Of Dead-Burned Magnesia Aggregates, Tyler Richards, Viraj Athavale, Jeffrey D. Smith, Ronald J. O'Malley
Materials Science and Engineering Faculty Research & Creative Works
Dead-Burned Magnesia is a Commonly Used Material in the Manufacturing of Refractories for the Steelmaking Industry. Aggregates of Dead-Burned Magnesia Contain Secondary Phases Due to the Impurities within the Magnesite Rock Used in its Production. While These Phases Can Aid in Sintering Magnesia, They May Have Some Impact on the High-Temperature Performance of the Refractory Product. High-Temperature Confocal Scanning Laser Microscopy Was Utilized to Observe the Behavior of Dead-Burned Magnesia Aggregates at Elevated Temperatures (Up to 1550°C). Liquid Formation Was Detected Even at Temperatures Below 1350°C. in Some Cases, This Liquid Quickly Exuded from the Aggregate Surface. This Liquid Phase …
Thermal And Electrical Properties Of Spark Plasma Sintered (Ti,Cr)B2 Ceramics, Steven M. Smith, Lun Feng, William Fahrenholtz, Gregory E. Hilmas, Laura Silvestroni
Thermal And Electrical Properties Of Spark Plasma Sintered (Ti,Cr)B2 Ceramics, Steven M. Smith, Lun Feng, William Fahrenholtz, Gregory E. Hilmas, Laura Silvestroni
Materials Science and Engineering Faculty Research & Creative Works
Thermal and electrical properties were measured for TiB2 ceramics containing varying CrB2 contents up to 33 mol%. The room-temperature thermal diffusivity decreased with increasing Cr content from 0.330 ± 0.003 cm2/s for pure TiB2 to 0.060 ± 0.003 cm2/s for (Ti0.66Cr0.33)B2. The amount of anisotropy in the coefficients of thermal expansion increased with increasing Cr content and the c-axis had the greatest dependence on Cr addition, with an increase of more than 25% in the thermal expansion for 33 mol% CrB2 compared to TiB2, whereas the a-axis only increased by about 8%. The electrical conductivity was the lowest for (Ti0.66Cr0.33)B2 …
Boro/Carbothermal Reduction Co-Synthesis Of Dual-Phase High-Entropy Boride-Carbide Ceramics, Lun Feng, William Fahrenholtz, Gregory E. Hilmas, Stefano Curtarolo
Boro/Carbothermal Reduction Co-Synthesis Of Dual-Phase High-Entropy Boride-Carbide Ceramics, Lun Feng, William Fahrenholtz, Gregory E. Hilmas, Stefano Curtarolo
Materials Science and Engineering Faculty Research & Creative Works
Dense, dual-phase (Cr,Hf,Nb,Ta,Ti,Zr)B2-(Cr,Hf,Nb,Ta,Ti,Zr)C ceramics were synthesized by boro/carbothermal reduction of oxides and densified by spark plasma sintering. The high-entropy carbide content was about 14.5 wt%. Grain growth was suppressed by the pinning effect of the two-phase ceramic, which resulted in average grain sizes of 2.7 ± 1.3 µm for the high-entropy boride phase and 1.6 ± 0.7 µm for the high-entropy carbide phase. Vickers hardness values increased from 25.2 ± 1.1 GPa for an indentation load of 9.81 N to 38.9 ± 2.5 GPa for an indentation load of 0.49 N due to the indentation size effect. Boro/carbothermal …
Thermal And Electrical Properties Of Spark Plasma Sintered (Ti,Cr)B2 Ceramics, Steven M. Smith, Lun Feng, William Fahrenholtz, Gregory E. Hilmas, Laura Silvestroni
Thermal And Electrical Properties Of Spark Plasma Sintered (Ti,Cr)B2 Ceramics, Steven M. Smith, Lun Feng, William Fahrenholtz, Gregory E. Hilmas, Laura Silvestroni
Materials Science and Engineering Faculty Research & Creative Works
Thermal and electrical properties were measured for TiB2 ceramics containing varying CrB2 contents up to 33 mol%. The room-temperature thermal diffusivity decreased with increasing Cr content from 0.330 ± 0.003 cm2/s for pure TiB2 to 0.060 ± 0.003 cm2/s for (Ti0.66Cr0.33)B2. The amount of anisotropy in the coefficients of thermal expansion increased with increasing Cr content and the c-axis had the greatest dependence on Cr addition, with an increase of more than 25% in the thermal expansion for 33 mol% CrB2 compared to TiB2, whereas the …
Solid-State Electrolytes For Long Duration Molten Sodium Batteries, Ryan C. Hill
Solid-State Electrolytes For Long Duration Molten Sodium Batteries, Ryan C. Hill
Theses and Dissertations--Chemical and Materials Engineering
Rechargeable batteries have become a staple of modern society, driving the development and expansion of portable electronics and electric vehicles. The long lifetime and high energy density provided by batteries have made them excellent candidates for use in the emerging field of long duration, grid-scale energy storage. However, traditional battery chemistries, such as Li-ion, are not an ideal solution for grid-scale storage, due to high-cost raw materials that are often sourced from volatile markets. Sodium-based batteries are a promising alternative for long duration storage, owing to the domestic abundance of raw materials and energy densities that nearly rival that of …
Intragranular Tungsten-Titanium Carbide Composite Ceramics Via Gas-Solid Displacement Reactions, Ryan Daniel Dempsey
Intragranular Tungsten-Titanium Carbide Composite Ceramics Via Gas-Solid Displacement Reactions, Ryan Daniel Dempsey
Doctoral Dissertations
"Research presented herein details the synthesis and characterization of nanocomposite ceramics featuring novel heterogeneous microstructures of potential interest in a variety of electrical and structural applications. Specifically, W-TiCy composite ceramics featuring tungsten nanoprecipitates located primarily within TiCy grains have been produced via sintering of intragranular nanocomposite powders produced via reaction processing-based techniques. This dissertation details the thermodynamic basis and applied kinetics of a processing scheme for fabricating nanocomposite ceramics whose morphological heterogeneity reflects that originally developed in the powder state. The first study in this series overviews the motivation for applying metallothermic displacement reactions, conducted through gaseous intermediates, to solid …
Boosting Snr Of Cascaded Fbgs In A Sapphire Fiber Through A Rapid Heat Treatment, Farhan Mumtaz, Hanok Tekle, Bohong Zhang, Jeffrey D. Smith, Ronald J. O'Malley, Rex Gerald, Jie Huang
Boosting Snr Of Cascaded Fbgs In A Sapphire Fiber Through A Rapid Heat Treatment, Farhan Mumtaz, Hanok Tekle, Bohong Zhang, Jeffrey D. Smith, Ronald J. O'Malley, Rex Gerald, Jie Huang
PSMRC Faculty Research
This Letter reports the performance of femtosecond (fs) laser-written distributed fiber Bragg gratings (FBGs) under high-temperature conditions up to 1600°C and explores the impact of rapid heat treatment on signal-to-noise ratio (SNR) enhancement. FBGs are essential for reliable optical sensing in extreme temperature environments. Comprehensive tests demonstrate the remarkable performance and resilience of FBGs at temperatures up to 1600°C, confirming their suitability for deployment in such conditions. The study also reveals significant fringe visibility improvements of up to ∼10 dB on a 1-m-long sapphire optical fiber through rapid heat treatment, representing a first-time achievement to the best of our knowledge. …
Development Of High Kinetic Inductance Superconducting Nanowire Devices On High Permittivity Strontium Titanate Substrates, Jamie Timmons
Development Of High Kinetic Inductance Superconducting Nanowire Devices On High Permittivity Strontium Titanate Substrates, Jamie Timmons
UNF Graduate Theses and Dissertations
This thesis involves the fabrication and characterization of devices made from two different superconducting materials: yttrium barium copper oxide (YBCO), a high-TC complex oxide, and niobium nitride (NbN), a low-TC transition metal nitride. Both types of devices are fabricated on strontium titanate substrates, which provides a good lattice match to YBCO and also an extremely large permittivity at low temperature. We demonstrate that wet etching of YBCO thin films via bromine can be a viable microfrabriation technique for the material. Using approximately 35 nm thick epitaxially grown YBCO on an STO substrate, we were able to fabricate YBCO “microwires” with …
Modified Reactive Sputter Deposition Of Titanium Nitride Thin Films Via Hipims With Kick-Pulse And Improvement Of The Structure-Zone Model, Andrew Miceli
UNF Graduate Theses and Dissertations
Direct current (DC) and radio frequency (RF) sputtering methods have been commonplace in industry for several decades and widely studied in literature. Hard films of nitrides, such as titanium nitride (TiN), have been deposited using reactive DC sputtering onto cutting tools and medical devices extensively as well. For these applications, the films require excellent adhesion, high density, and high hardness. High-Power Impulse Magnetron Sputtering (HIPIMS) has emerged over the last several years as a method to produce films with increased density and mechanical properties. Process-structure-property relationships for reactive HIPIMS are not yet well developed. Additionally, conventional HIPIMS suffers from relatively …
Manganese-Based A-Site High-Entropy Perovskite Oxides For Solar Thermochemical Hydrogen Production, Cijie Liu
Manganese-Based A-Site High-Entropy Perovskite Oxides For Solar Thermochemical Hydrogen Production, Cijie Liu
Graduate Theses, Dissertations, and Problem Reports (ETD)
Non-stoichiometric perovskite oxides have been studied as a new family of redox oxides for solar thermochemical hydrogen (STCH) production owing to their favourable thermodynamic properties. However, conventional perovskite oxides suffer from limited phase stability and kinetic properties, and poor cyclability. Here, we report a strategy of introducing A-site multi-principal-component mixing to develop a high-entropy perovskite oxide, (La1/6Pr1/6Nd1/6Gd1/6Sr1/6Ba1/6)MnO3 (LPNGSB_Mn), which shows desirable thermodynamic and kinetics properties as well as excellent phase stability and cycling durability. LPNGSB_Mn exhibits enhanced hydrogen production (~77.5 mmol moloxide–1) compared to (La …
System Analysis Of An Internal Combustion Engine (Ice) – Solid Oxide Fuel Cell (Sofc) Hybrid Cycle, Jose Javier Colon Rodriguez
System Analysis Of An Internal Combustion Engine (Ice) – Solid Oxide Fuel Cell (Sofc) Hybrid Cycle, Jose Javier Colon Rodriguez
Graduate Theses, Dissertations, and Problem Reports (ETD)
Due to the intermittent nature of renewable energy and the rigid operation of existing coal plants, the need for flexible power generation technology is eminent. Hybrid energy systems have shown potential for flexible, grid following dynamics while maintaining higher efficiencies. The work below focuses on the performance analysis of a proposed 100 kW pressurized Internal Combustion Engine (ICE) and Solid Oxide Fuel Cell (SOFC) hybrid system. The un-utilized fuel from the SOFC stack provided the chemical energy to operate the engine. A turbocharger was used to deliver the necessary air flow for both the stack and engine. An external reformer …