Ceramic Materials Commons^™

The Effect Of Air-Entraining On Concrete Durability, Jane Magdy Aziz Abadir

Archived Theses and Dissertations

No abstract provided.

Deep Learning-Guided Prediction Of Material’S Microstructures And Applications To Advanced Manufacturing, Jianan Tang

All Dissertations

Material microstructure prediction based on processing conditions is very useful in advanced manufacturing. Trial-and-error experiments are very time-consuming to exhaust numerous combinations of processing parameters and characterize the resulting microstructures. To accelerate process development and optimization, researchers have explored microstructure prediction methods, including physical-based modeling and feature-based machine learning. Nevertheless, they both have limitations. Physical-based modeling consumes too much computational power. And in feature-based machine learning, low-dimensional microstructural features are manually extracted to represent high-dimensional microstructures, which leads to information loss.

In this dissertation, a deep learning-guided microstructure prediction framework is established. It uses a conditional generative adversarial network (CGAN) …

Automated Mini-Tubular Ceramic Production, Hunter Brooks, Daniel Freeman, Leo Taranta-Slack

Mechanical Engineering

Researchers at Lawrence Livermore National Laboratory need a way to increase the rate of manufacturing of mini-tubular ceramics to be used in testing particulate air filters. This document outlines our process from researching and writing an initial scope of work all the way to fabricating and testing a final prototype. This journey takes us through the background research, ideation process and selection of a final design. We also detail the desired engineering specifications and our concept selection process. We dedicate a significant portion of this report to discussion of our final design. We delve into how it was manufactured as …

Microstructural And Optical Properties Of Mgal2o4 Spinel: Effects Of Mechanical Activation, Y2o3 And Graphene Additions, Nina Obradovic, William Fahrenholtz, Cole Corlett, Suzana Filipovic, Marko Nikolic, Bojan A. Marinkovic, Simone Failla, Diletta Sciti, Daniele Di Rosa, Elisa Sani

Materials Science and Engineering Faculty Research & Creative Works

Magnesium Aluminate and Other Alumina-Based Spinels Attract Attention Due to their High Hardness, High Mechanical Strength, and Low Dielectric Constant. MgAl₂O₄ Was Produced by a Solid-State Reaction between MgO and Α-Al₂O₃ Powders. Mechanical Activation for 30 Min in a Planetary Ball Mill Was Used to Increase the Reactivity of Powders. Yttrium Oxide and Graphene Were Added to Prevent Abnormal Grain Growth during Sintering. Samples Were Sintered by Hot Pressing under Vacuum at 1450◦C. Phase Composition and Microstructure of Sintered Specimens Were Characterized by X-Ray Powder Diffraction and Scanning Electron Microscopy. Rietveld Analysis Revealed 100% …

Creep Behavior And Deformation Mechanisms Of Spark Plasma Sintered Oxide Ceramics For Aerospace Systems At 1300˚C - 1400˚C, David D. Swanson

Theses and Dissertations

The mechanical behavior of YAG and LuAG was investigated at elevated temperatures. The specific materials investigated in this work include high-purity, polycrystalline YAG, high-purity, polycrystalline LuAG, and two doped variants of YAG: 2at% Yb-doped, polycrystalline YAG and 2at% Er-doped, polycrystalline YAG. Several billets of each material were prepared and processed by means of spark plasma sintering (SPS). Many different sintering parameters were utilized in order to obtain materials with various physical properties and to identify the effects of sintering parameters on the average grain size of the resulting materials. The compressive creep behavior of these materials was investigated at 1300°C …

Investigation And Characterization Of New Optically Stimulated Luminescence (Osl) Dosimetric Materials, Linyu Pan

All Dissertations

Optically stimulated luminescence (OSL) dosimeters have attracted increasing attention due to advantages over TL dosimeters, including no thermal quenching and higher sensitivity. Nevertheless, currently, there are only two commercially available OSL dosimeters, BeO and Al₂O₃:C. An OSL dosimeter requires low effective atomic number (Z_eff < 16), at least one type of recombination center and one type of trap, and UV~blue emission. In this dissertation, motivated by the search of new OSL dosimetric materials, a systematic investigation of alumina (Z_eff = 11.3) and magnesium aluminate spinel (Z_eff = 11.2) based materials was performed in terms of the engineering of the recombination centers and electronic traps. Microstructural characterization was executed by means of X-ray diffraction (XRD) and Raman spectroscopy. Luminescence was characterized under X-ray excitation (radioluminescence; RL) at ambient and …

Development Of Eam And Rf-Meam Interatomic Potential For Zirconium Diboride, Bikash Timalsina

Graduate Theses/Dissertations

Embedded Atom Method (EAM) and Modified-EAM (MEAM) interatomic potentials were developed for zirconium diboride (ZrB₂). The EAM and “Reference Free” (RF) version of the Modified Embedded Atom Method (RFMEAM) potentials have been fitted by utilizing Density Functional Theory (DFT)-based datasets including lattice deformations and high-temperature ab-initio molecular dynamics (AIMD) simulation results. The occupancies of phonons for acoustic phonon modes from the density functional theory calculation shows that these modes of vibration, mostly due to heavier mass element (Zr), which occur below 8.711 THz, while a slight underestimation to that of DFT calculation predicted by EAM below 8.439 THz …

Review: Factors Affecting Composite Laminates Against Lightning Strikes, Aaryan Manoj Nair

Publications and Research

Lightning strike protection (LSP) have recently been a newly developing field particularly with the emergence of graphene thin film integration into carbon fiber composite structures. This technology has a widespread application in airplanes, wind turbines, and other instruments which are susceptible to frequent lightning strikes. Electrical discharge of the instrument in a safe manner is vital for the safety of the passengers (in the case of flights) as well as the integrity of the aircraft structures because of their specific mechanical and structural properties, which are essential for their functioning. The purpose of the study is to fabricate graphene thin …

Mechanical Failure Of Metal/Ceramic Interfacial Regions Under Shear And Tensile Loading, Xiaoman Zhang

LSU Doctoral Dissertations

Quantitative assessment of the adhesion strength of ceramic hard coatings on substrates is a subject of great technological importance as well as current scientific relevance. Achievement of reliable and quantitative measurements of interfacial strength has proven difficult over the past two decades. In this dissertation, how the deformation and fracture behavior of ceramic/metal/substrate interfacial regions under shear and tensile loading is influenced by the structure and chemical composition of the interfacial region were observed and discussed. Interfacial shear failure experiments were carried out on focused ion beam fabricated micro pillars containing interfacial regions of ceramic/metal/substrate systems. Detailed characterization was carried …

Cyclic Regeneration Of Nanostructured Composites For Catalytic Applications, Fatih Dogan

Materials Science and Engineering Faculty Research & Creative Works

A cermet catalyst material, defining a matrix having interconnected open pores, the matrix selected from the group consisting of YSZ and CGO and defining a substrate, a ceramic coating having a general formula AyBnOx at least partially coating the pores, and a plurality of metal particles A at least partially embedded in the ceramic coating. A is selected from the group consisting of Co, Cu, Ce, Ni, Ti, and combinations thereof and B is selected from the group consisting of Mo, W, Ce, and combinations thereof. When the coating is in a first oxidizing atmosphere and at a temperature between …

Experimental Investigation Of Surface Resistivity Of Yttrium Stabilized Zirconium As A Thin Film, Matthew J. Melfi

Seton Hall University Dissertations and Theses (ETDs)

Solid Oxide Fuel Cells are devices that use electrochemical reactions to convert chemical energy from fuel to electricity. In comparison with coal power plants, a Solid Oxide Fuel Cell, produces a higher electrical conversion efficiency. However, at higher temperatures (1000°C) it creates a lower ionic conductivity, which limit the Solid Oxide Fuel Cells. When lowering the temperature, the ohmic resistance increases. In our research, an Yttrium Stabilized Zirconium layer will be produced from a fine dimple grain structure allowing high flow of oxygen mobility. This mobility increases ionic conductivity and decrease ohmic loss. The goal of our research is first …

Design And Fabrication Of A Microstrip Bandpass Filter In Ltcc, Allison Rucker

Electrical Engineering Undergraduate Honors Theses

The goal of the project was to design and fabricate a bandpass filter with a center frequency of 25GHz with a 2GHz bandwidth. The first step was to do the calculation to design a bandpass filter to meet these specifications along with the properties of the Dupont^TM GreenTape^TM 9K7. HFSS was then used to verify the results from the initial calculations. There was a significant error between the two results, so more tweaking was done to the calculations to get a better center frequency. After a final design was decided, the fabrication process started. Low-Temperature Co-Fired Ceramics (LLTC) …

Study Of Static And Dynamical Properties Of Complex Antiferroelectrics Materials, Kinnary Yogeshbhai Patel

Graduate Theses and Dissertations

The aim of this dissertation is the investigation of the static and dynamical properties of the complex antiferroelectric materials using Effective Hamiltonian method and First principles calculations. In chapter 3, a novel elemental interatomic coupling in perovskite materials which bilinearly couples the antiferroelectric displacements of cations with the rotations of the oxygen octahedra. This new coupling explains a very complex crystal structure of prototypical antiferroelectric PbZrO3. My explanation provides a unified description of many other complex antipolar crystal structures in variety of perovskite materials, including the occurrence of incommensurate phases in some of them. In chapter 4, results and analysis …

Solid State Synthesis And Characterization Of Apatite Based Ceramic Waste Form For The Immobilization Of Radioactive Iodine, Md Imdadul Islam

LSU Doctoral Dissertations

The growing demand for nuclear power in the United States and worldwide is accountable for addressing the major concern of radioactive waste, involving the technical challenges of maintaining the nuclear fuel cycle and immobilizing high-level wastes for safe disposal in geological storage. The appropriate selection of waste forms for spent nuclear fuel such as fission products and radionuclides can be effective means for a feasible and sustainable nuclear fuel cycle. But highly volatile radionuclides such as iodine (129) are of specific concern due to its extraordinary long half-life (15.7 million years). Due to its poor solubility and high volatility at …

Static Fatigue Of Hi-Nicalon™ S Ceramic Fiber Tows At 600°C In Air And Silicic Acid-Saturated Steam, Caleigh M. Nelson

Theses and Dissertations

Ceramic matrix composites (CMCs) have the potential to be utilized in applications such as hypersonic vehicles, aircraft leading edges, hot sections of engines, and rocket nozzles. Of particular interest are advanced SiC/SiC composites that can withstand the elevated temperatures and harsh oxidizing environments while maintaining their properties and structural integrity under an applied load. Steam, a major component of combustion environment, is one such aggressive oxidizing environment. As steam passes through the SiC/SiC composite, entering the composite interior through the cracks in the SiC matrix, it becomes saturated with silicic acid, Si(OH)₄. Before incorporating SiC/SiC composites in the …

Fatigue Of Two Oxide/Oxide Ceramic Matrix Composites At 1200°C In Air And In Steam. Effect Of Diamond Drilled Effusion Holes, Anthony R. Cabri

Theses and Dissertations

The tension-tension fatigue behavior of two oxide-oxide ceramic matrix composites (CMCs) was investigated at 1200°C in laboratory air and steam. Both composites consist of a porous oxide matrix reinforced with laminated, woven mullite/alumina (NextelTM720) fibers. The first composite had an alumina matrix, while the second had an alumina-mullite matrix. First, we assessed the effects of incorporating mullite into the matrix material on fatigue performance by studying the tension-tension fatigue behavior of alumina-mullite matrix CMC. Second, we evaluated the effects of effusion holes on the alumina matrix CMC's fatigue performance. Specimens containing an array of 17 effusion holes of 0.5-mm diameter …

Research Trend Of Metal Matrix Composites Reinforced With Silica Extracted By Green Route: A Bibliometric Analysis, Rinku Datkhile, Meena Laad, Babaji Ghule

Library Philosophy and Practice (e-journal)

Metal Matrix Composites have acquired an important place in the engineering applications due to their distinctive characteristics such as high specific strength, lower specific gravity, improved material stiffness, better durability, enhanced creep and fatigue strength etc. Worldwide scientists are working on the improvement of mechanical properties of composite materials. The present work attempts to summarise all the research carried out on metal matrix composites reinforced with silica extracted by green route and provides up-to-date research material for researchers who are interested in the field of composites with metal matrices. Scopus databases and software such as Gephi Vos Viewer and Table2Net …

Automated Control System For The Remote-Controlled Torch Positioner, Christopher Ferguson, Anna Abate, Kyle Cramer, Alex Sabitsch, Jacob Stefanko

Williams Honors College, Honors Research Projects

The goal of this project is to design and implement a controls system for Dr. Morscher’s burner rig. The rig serves to simulate jet turbine conditions and test how materials, specifically ceramic matrix composites, react under high temperatures and stresses. Currently, the location of the torch relies solely on manual adjustments and has no automated control system. The improved design will automatically adjust the torch position based on the desired temperature of the sample being tested, therefore maintaining a steady environment for the sample. The current method of manual adjustments for regulating temperature is a crude solution that does not …

A Kinetic Evaluation For Phenothiazine Base Copolymers, Fatih Dogan

Materials Science and Engineering Faculty Research & Creative Works

In here, the non-isothermal decomposition kinetics of co-polymers-based phenothiazine was present-ed. For this, firstly, 3, 7-di-2-thienyl-10H-phenothiazine (TF) was prepared via an optimized Suzu-ki–Miyaura cross-coupling reaction. After monomer (TF) characterization, the copolymerization re-actions with EDOT and thiophene were performed by the electrochemical technique. The molecular masses of the co-polymers were found by gel permeation chromatography (GPC) analysis. Thermal characterizations of the resulting polymers were conducted by thermogravimetric analyses. The thermal decomposition kinetics of the resulting polymers was also performed. For this, the kinetic methods (Tang, FWO, KAS, Kissinger, and Friedman) based on the multiple heating rates were used. Several kinetic parameters …

Degradation Issues And Stabilization Strategies Of Protonic Ceramic Electrolysis Cells For Steam Electrolysis, Hanrui Su, Yun Hang Hu

Michigan Tech Publications, Part 1

Protonic ceramic electrolysis cells (PCECs) are attractive electrochemical devices for converting electrical energy to chemicals due to their high conversion efficiency, favorable thermodynamics, fast kinetics, and inexpensive materials. Compared with conventional oxygen ion-conducting solid oxide electrolysis cells, PCECs operate at a lower operating temperature and a favorable operation mode, thus expecting high durability. However, the degradation of PCECs is still significant, hampering their development. In this review, the typical degradations of PCECs are summarized, with emphasis on the chemical stability of the electrolytes and the air electrode materials. Moreover, the degradation mechanism and influencing factors are assessed deeply. Finally, the …

Reclamation Of Fused Silica From Investment Shells Used For Casting Steel, Samuel L. Holt

College of Graduate Studies: Theses & Dissertations

Fused silica is widely used for investment casting shell molds. Fused silica shells are discarded after being used for casting one time. This is due to the transformation of fused silica to beta cristobalite above 1652℉ (900℃). To reduce cost and waste of investment casting foundries, this study is exploring a method to inhibit transformation of fused silica and reclaim it from high temperature investment casting shells. This research has employed firing to minimalize fused silica transformation to cristobalite. The phase transformation is minimalized due to sintering and coarsening of the particles during firing. Coarsening reduces surface area to volume …

Improving Performance And Durability Of Intermediate Temperature Proton‐Conducting Solid Oxide Electrolysis Cells Via Materials Design And Catalyst Surface Engineering, Hanchen Tian

Graduate Theses, Dissertations, and Problem Reports (ETD)

Solid oxide steam electrolysis cell, a promising electrical-chemical conversion device for the next generation efficient hydrogen production and energy storage, has been actively studied because of their high energy conversion efficiencies and prospective applications as electrochemical reactors. After decades of research on protonic ceramic materials, remarkable advances have been made in the protonic ceramic electrochemical cells (PCECs) air electrode and electrolyte. However, the existing air electrodes are far from satisfying the requirements of practical applications, a series of issues, including the lack of active and durable electrodes, greatly limit the commercialization. To date, the systematic development of triple conducting catalysts …

Metal Supported Solid Oxide Fuel Cell Using Proton Conducting Electrolyte For Direct Ammonia Utilization, Edwin Vega Hiraldo

Graduate Theses, Dissertations, and Problem Reports (ETD)

Transportation represents about 27% of global warming greenhouse gas emissions nowadays. To reduce these emissions, fuel cell electric vehicles have been poised to be a new trend to provide zero-emission transportation. Among them, solid oxide fuel cells (SOFCs) offer efficient, clean energy, especially when powered by carbon-free fuel, such as ammonia. To enable onboard ammonia-fed SOFCs, a metal-supported, proton-conducting SOFC is investigated in this study. The metal support would provide physical robustness for thermal shock during vehicles’ quick start-up and shutdown, reduce internal temperature gradients due to the greater thermal conductivity of the metal, and enable conventional metal joining for …

Increasing The Seebeck Coefficient Of Thermoelectric Calcium Cobaltite Ceramics Through Incorporation Of Rare-Earth Elements, Andre Fabian Fernandes

Graduate Theses, Dissertations, and Problem Reports (ETD)

The demand for alternative sources of energy continues to grow, so it is essential to look for alternatives that are environmentally sustainable to minimize the environmental impact of energy generation. Projections suggest that renewables have the potential to make up over fifty percent of power generation by 2035. Studies have shown that in 2020 more than 62% of the energy produced in the US was lost, with most of this energy being in the form of waste heat. Waste heat can be utilized to improve the efficiency of power production or even power other devices. This waste heat can be …

Contributions To The Performance Of Thin Film Capacitors For High Reliability Applications, Daniel Krueger

Doctoral Dissertations

"Capacitors are critical devices in microelectronic assemblies that must be incorporated into electronic systems through a variety of ways such as integrated or discrete devices. This work has developed new thin film capacitors deposited directly onto multichip module or printed circuit board surfaces to benefit from closer integration that enhances system performance for use in high reliability applications. The capacitors serve as filters or provide tuning and energy storage functions. Unexpected performance was observed during development that included low adhesion of the films to the substrates, higher effective dielectric constants than reported in literature, and low yields. Three publications resulted …

Thermal And Mechanical Properties Of Novel Carbide Materials, Evan Charles Schwind

Doctoral Dissertations

"This research focuses on studying the thermal and mechanical properties of novel carbide materials at room and elevated temperatures. The novel carbide materials investigated include zeta phase tantalum carbide (ζ-Ta₄C_3-x) and a high entropy (Ta,Hf,Nb,Zr)C carbide. The electrical resistivity and thermal conductivity of zeta phase tantalum carbide (~96 wt.%) were measured as 160 ± 4.2 μΩ-cm and 9.6 W/m•K. These are higher and lower (respectively) than for cubic tantalum carbide, most likely due to planes of carbon vacancies present in the ζ-Ta₄C_3-x crystal structure. The thermal conductivity of (Ta,Hf,Nb,Zr)C was lower than any …