Ceramic Materials Commons^™

Improving The Concrete Compressive And Flexural Strength With A Low Fraction Addition Of Carboxylated Nitro-Oxidized Cellulose Nanofibrils From Banana Rachis, Ngesa Ezekiel Mushi, Emmanuel Kagya

Tanzania Journal of Science

Conventionally, concrete strength depends on the bonding interface, especially in hydrated products such as calcium silicate hydrate (CSH). As a result, concrete is sensitive to tensile load. With its unique properties, a low fraction of carboxylated nitro-oxidized cellulose nanofibrils (NOCNF) from the banana rachis is employed to improve the mechanical performance of the concrete nanostructurally. Compressive and flexural strength using the NOCNF content at 0, 0.05, and 0.1 wt.%, cured for 7 and 28 days, were evaluated. Notably, the compressive strength increased by 16 % and the flexural strength by 13 % at 0.1 wt.% NOCNF compared to plain concrete …

Spark Plasma Sintering Of Alumina With Controlled Porosity, Harshail Patet

Discovery Day - Daytona Beach

Alumina is one of the most widely used advanced ceramics, serving applications that range from dense structural and wear-resistant components to porous thermal insulation and filtration systems. Porosity is a defining microstructural feature that governs mechanical strength, thermal conductivity, and permeability, meaning different applications demand different porosity levels from the same material. Spark plasma sintering (SPS) enables rapid consolidation by simultaneously applying pulsed electric current and uniaxial pressure, offering precise control over density, grain size, and porosity in significantly shorter processing times than conventional sintering. While prior studies have investigated the individual effects of SPS parameters on alumina densification, a …

Coupled Multiphysics Transport-Reaction Modeling Framework For Combustion Synthesis Of Cement Phases: Insights Into Β-C2s Formation And Wavefront Dynamics, Sayee Srikarah Volaity, Shubham Agrawal, Aditya Kumar, Narayanan Neithalath

Materials Science and Engineering Faculty Research & Creative Works

Biofuel-based combustion synthesis (BCS) processes offer low-temperature, low-carbon routes to lime and clinker production. However, they involve tightly coupled interactions between heat transfer, gas flow, and sequential solid-state reactions within reactive pellets. Experiments typically provide surface temperature evolution and final phase assemblages but give limited insight into the conversion process and the interaction between composition and process conditions. A coupled transport-reaction framework is developed here to resolve this limitation─the synthesis of β-C2S (belite), a major cementing phase, serving as an example. Transient conservation equations for energy, momentum, and species are solved for a porous pellet exchanging heat and mass with …

Lafe0.925ti0.075o3 Perovskite Coated With Ethyl Cellulose: A High-Stability, Low-Hysteresis Platform For Advanced Humidity Sensing, Akhmad Futukhillah Fataba Alaih, Djoko Triyono, Rifqi Almusawi Rafsanjani

Makara Journal of Science

Humidity sensors are pivotal in numerous sectors, such as environmental monitoring, industrial automation, and health-care. This study presents the fabrication and detailed evaluation of an advanced humidity sensor using ethyl cellulose (EC)-coated LaFe_0.925Ti_0.075O₃ (LFTO) perovskite nanoparticles synthesized via the sol-gel method. The LFTO nanopar-ticles exhibited a mesoporous structure with an enhanced surface area, which significantly improved their moisture adsorption capabilities. The innovative application of EC coating addresses critical substrate adhesion issues, enhancing mechanical stability without compromising sensor sensitivity. Comprehensive performance evaluations revealed minimal hysteresis (

A Hybrid Mechano-Thermal Route To Synthesize Reactive Pozzolans From Clay Minerals: A Case Of Kaolinite, Oluwadamilare Charles Adesina, Bryan K. Aylas-Paredes, Brian R. Cherry, Luciano A. Gobbo, Aditya Kumar, Narayanan Neithalath

Materials Science and Engineering Faculty Research & Creative Works

Aluminosilicate resources from unconventional sources offer promising potential for developing low-carbon supplementary cementitious materials (SCMs), yet their activation typically requires energy-intensive thermal processing. Kaolinite is a geographically abundant and highly attractive precursor clay mineral to reduce the clinker factor in concrete. By integrating mechano- and thermo- chemistry sequentially in a novel hybrid mechano-thermal activation (MTA) strategy for clay mineral activation, the dehydroxylation of pure kaolinite polymorphs KGa-1b and KGa-2 for enhanced pozzolanic reactivity is unlocked at temperatures that are lower than those needed for conventional thermal activation (TA). The mechano-chemical activation (MCA) step that induces significant structural defects and disorder …

In-Operando Imaging For Mechanistic Insights And Process Optimization In The Biofuel-Driven Combustion Synthesis Of Cement And Precursor Phases, Shubham Agrawal, Jeffrey J. Long, Aditya Kumar, Narayanan Neithalath

Materials Science and Engineering Faculty Research & Creative Works

Biofuel-based combustion synthesis (BCS) is a promising low-carbon pathway for decarbonizing cement production, providing an alternative to the fossil-fuel-driven clinkering process typically conducted at ∼1450 °C. Understanding microscale combustion mechanisms is essential to efficiently transfer biofuel-generated heat to cement precursors for targeted phase formation. Unlike previous studies focusing on macro-scale parameters such as fuel content/type, porosity, and holding temperature, this work provides mechanistic insights into microscale combustion behavior, linking microstructural phenomena with macro-scale processing conditions to guide parameter optimization. In-operando microscale imaging was employed to examine combustion wave propagation, spatio-temporal temperature evolution, and microstructural transformations within reactive pellets. Two combustion …

Co-Calcination Of Limestone And Clay Enhances The Performance Of Limestone Calcined Clay Cement (Lc3), Oluwadamilare Charles Adesina, Sahil Surehali, Avinaya Tripathi, Kayla Lauren Lee, Bryan K. Aylas-Paredes, Aditya Kumar, Narayanan Neithalath

Materials Science and Engineering Faculty Research & Creative Works

Limestone-calcined clay cements (LC³) reduce the environmental impact of cement production and accelerate the industry transition toward carbon neutrality. While conventional LC³ with 50% clinker replacement (LC³-50) demonstrate long-term performance comparable to ordinary Portland cement (OPC) in concrete, early-age performance is generally compromised. This study explores for the first time, joint thermal treatment—that is, co-calcination—of limestone (LS) and bulk kaolinitic clay in mass ratios of 1:1 to 1:4 under a calcination regime specifically designed to ensure activation of the clay mineral. The co-calcination converts a small fraction of LS to metastable CaO, thus providing an …

Multiphysics Simulation And Experimental Validation Of Phase Transformation And Hardness In Jominy End-Quenched Low-Alloy Steels, J. S. Alabi, E. Heidari, M. F. Buchely, K. Chandrashekhara, S. N. Lekakh, R. J. O'Malley, V. A. Athavale, A. Kumar

Materials Science and Engineering Faculty Research & Creative Works

High-volume industrial continuous hot-rolled steel heat treatment processes involve sophisticated multi-phase modeling. The performance of a given process can be optimized by coupling phase transformation kinetics with the cooling conditions of the process. This study develops a multiphysics model to simulate an intensive quenching process for steel, which is inherently transient and highly dependent on numerous parameters. The simulated object was a Jominy end-quenched specimen geometry using two commercial steels, AISI 4130 and AISI 4140, with the goal of transferring a verified methodology to the heat treatment process for industrial heavy-section products (bars, slabs). The simulation employs thermal, mechanical, and …

Data Driven Design Of Ultra High Performance Concrete Prospects And Application, Bryan K. Aylas-Paredes, Taihao Han, Advaith Neithalath, Jie Huang, Ashutosh Goel, Aditya Kumar, Narayanan Neithalath

Electrical and Computer Engineering Faculty Research & Creative Works

Ultra-high-performance concrete (UHPC) is a specialized class of cementitious composites that is increasingly used in various applications, including bridge decks, connections between precast components, piers, columns, overlays, and the repair and strengthening of bridge elements. The mechanical and durability properties of UHPC are significantly influenced by factors such as low water-to-binder ratios, the inclusion of supplementary cementitious materials (SCMs), and fiber reinforcement. Machine learning (ML) has been employed to predict the performance of UHPC and optimize its mixture designs by using various raw materials. This study first provides a comprehensive review of ML applications in UHPC, focusing on predicting workability, …

Elucidating The Effects Of Water Activity On The Hydration Kinetics And Thermodynamics Of Ye’Elimite–Calcium Sulfate Hydrate Systems, Godwin I. Ogbuehi, Rupack R. Halder, Aditya Kumar, Gaurav Sant, Monday U. Okoronkwo

Materials Science and Engineering Faculty Research & Creative Works

Relative humidity and water activity (aH) reductions have been known to suppress the hydration of anhydrous cement clinker phases. However, the relationship between ye'elimite (C4A3$) hydration kinetics and water activity remain unclear. This study employs experimental and thermodynamic modeling approaches to investigate the influence of water activity on ye'elimite hydration in the "C4A3$ + water", and "C4A3$ + gypsum + water" systems. Experimental findings indicate that as water activity decreases, C4A3$ hydration diminishes until the reaction is brought to a halt at a threshold aH. The critical aHand corresponding solubility constant of C4A3$ (KC4A3S¯) estimated from thermodynamic analysis are 0.46 …

Microstructure Densification In Cement Pastes Enabled By Novel Graphene Types, Sahil Surehali, Taihao Han, Ranjith Divigalpitiya, Aditya Kumar, Narayanan Neithalath

Materials Science and Engineering Faculty Research & Creative Works

The primary barriers hindering graphene's widespread adoption as a performance-enhancing additive in cement-based systems have traditionally been its prohibitive cost and the sustainability concerns associated with conventional manufacturing processes. However, these impediments have recently been mitigated by advancements in detonation synthesis techniques, enabling scalable, cost-effective, and environmentally favorable production of novel graphene types—specifically fractal graphene (FG) and reactive graphene (RG). This paper explores the influence of ultra-low dosages of FG and RG (≤ 0.04 % by mass of cement, which results in ∼20 % increase in compressive strengths) on the pore-structure features of cement pastes. Compared to the control paste, …

Enabling Carbon Dioxide Mineralization And Active Set Control In Portlandite-Based Cementitious Suspensions, Xiaodi Dai, Sharu Bhagavathi Kandy, Rui Xiao, Manas Sarkar, Shubham Wani, Thiyagarajan Ranganathan, Narayanan Neithalath, Aditya Kumar, Mathieu Bauchy, Edward Garboczi, Torben Gädt, Samanvaya Srivastava, Gaurav Sant

Materials Science and Engineering Faculty Research & Creative Works

The real-time control of concrete's stiffening allows users to better control pumping and extrusion during 3D-printing processes. Here, a portlandite-based cementitious formulation (i.e., slurry or suspension) that features the potential for rapid CO₂ uptake is adapted for 3D-printing applications. In particular, we showcase a portlandite-fly ash binder system combined with a thermo responsive polymer, wherein precise control via thermal activation allows set control and rapid solidification. Through the thermally induced polymerization of polyacrylamide, the hybrid binder system rapidly undergoes stiffening at trigger onset temperatures ranging from 60 °C to 80 °C, exhibiting average stiffening rates of up to 2600 …

Mno2 Nanoscale Interface Modification, Alexander C. Skoppe

Doctoral Dissertations and Master's Theses

Interface modification of carbon fibers has been shown to improve the mechanical performance of composites. In addition, interface modification of carbon fiber composites can impart multifunctionality into the resulting composite. This work will explore ZnO and MnO2 as interface modifications for use on carbon fibers. When exposed to high temperatures, carbon fibers undergo fiber degradation, leading to the need for low-temperature hydrothermal processes. This work will develop and characterize a nanoscale ZnO and MnO2 interface modification for use on carbon fibers. These nanomodifications will be developed with low-temperature processes, minimizing the fiber degradation that the fibers undergo. Fourier transform infrared …

Ultra-Low Dosages Of Novel Graphene Types Enhance The Rheological Properties And Buildability Of 3d Printed Binders, Sahil Surehali, Akshay Venkatachalam, Ranjith Divigalpitiya, Aditya Kumar, Narayanan Neithalath

Materials Science and Engineering Faculty Research & Creative Works

The use of graphene as a high-performance concrete additive is attractive; but, its cost and concerns about production scalability and dispersion efficiency in concrete are impediments to widespread use. This study explores the impact of ultra-low dosages (≤0.02 % by mass of binder) of two novel graphene types—fractal graphene (FG) and reactive graphene (RG)—produced through a cost-effective, environmentally friendly, and scalable process, on the rheological properties of 3D-printable concrete. Both FG and RG significantly enhance the dynamic and static yield stresses and viscoelastic properties of the binder, with RG-modified mixtures exhibiting slightly more pronounced enhancements due to the presence of …

Fire Fossils: Biomineral Infrastructures In Untangling Climates, Tanmayee More

Masters Theses

Diatoms drift, sediments sink, wildfires generate their own weather. Lightning strikes can blast sand into glass, and microscopic organisms do the same in the cold recesses of the ocean. What alchemies and metabolisms catalyze space, time, and energy? What are the thermodynamics of infrastructure in Climate Change?

Places, materials, and beings are afterimages. Through alchemical experiments, and multi-scalar imaging, I develop simulations of wildfires, and their profound, reverberating effects. In this thesis, a glass-meets-landscape experimental process enters these obscured conditions and renders new material relations for the built environment.

Advanced Manufacturing Of Multifunctional Shape Memory Polymer Composites And Self-Healing Systems, John B. Konlan

LSU Doctoral Dissertations

The need for multifunctional light weight structures for engineering applications is on the rise. Multifunctional composites are desired because of their ability to combine multiple functionalities into one structure. The advantages of a high strength-to-weight ratio of multifunctional composites make them desirable and suitable for use in energy-efficient applications. Shape-memory polymers (SMPs) have attracted interest over the past several decades because of their multifunctional nature. They have found use in many applications such as aerospace, satellites, automobiles, textiles, and biomedical devices, where lightweight and multifunctionality are key. The self-healing nature of most SMPs makes them suitable for use in lightweight …

Numerical Simulation Of Heat Transfer In Self-Propagating High-Temperature Synthesis (Shs)-Based Calcination Of Limestone, Sayee Srikarah Volaity, Shubham Agrawal, Srinivas Kilambi, Patrick Phelan, Aditya Kumar, Narayanan Neithalath

Materials Science and Engineering Faculty Research & Creative Works

Calcination of limestone, a high temperature (∼900 °C) process that emits 44 % of the mass of limestone as CO₂, is a critical process in the production of many industrially important materials. To soften the CO₂-related impacts of traditional calcination, and to enable ultrafast synthesis of lime, a novel approach based on self-propagating high-temperature synthesis (SHS) has been put forward. SHS uses exothermic heat released by the combustion of fuel intermixed with the reactants to advance the reaction, and hence requires the provision of lower external temperatures. This study introduces a microstructure-guided modeling approach to understand …

Effect Of Niobium Dopant On Zno Thin Films Prepared Via The Sol–Gel Spin Coating Method, Kevin Alvin Eswar, Nur Fairuz Rostan, Maryam Mohamad, Rabiatuladawiyah Md Akhir, Rosfayanti Rasmidi, Muliyadi Guliling, Najwa Ezira Azhar, Irmaizatussyehdany Buniyamin, Mohd Firdaus Malek, Mohamad Rusop Mahmood, Husairi Fadzilah Suhaimi, Saifollah Abdullah

Makara Journal of Science

Thin films of zinc oxide (ZnO) and niobium (Nb)-doped ZnO were deposited on a glass substrate using the sol–gel spin coating method. Diethanolamine, isopropyl alcohol, and zinc acetate served as the stabilizers, solvent, and starting ma-terial, respectively. Niobium pentachloride was employed as the dopant source. Energy-dispersive X-ray analysis con-firmed Nb incorporation. Field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), and ultravio-let–visible spectroscopy (UV–Vis) analyses characterized the morphology, structure, and optics of the films, respective-ly. Both films, comprising nanoparticles, were visible in FESEM. Nb doping reduced the particle size from 44.2 nm to 35.8 nm. The XRD peaks at 31.23°, …

A Low-Carbon Approach For Lime Production Using Self-Propagating High Temperature Synthesis-Driven Limestone Calcination, Shubham Agrawal, Sayee Srikarah Volaity, Srinivas Kilambi, Aditya Kumar, Narayanan Neithalath

Materials Science and Engineering Faculty Research & Creative Works

Limestone calcination produces calcium oxide (or lime), that forms the basis for the manufacturing of many critical engineering materials such as cement and iron-and-steel. Limestone calcination—an endothermic reaction—is regarded as one of the most energy-and-CO₂ intensive industrial chemical reactions, and is facilitated by fossil fuels, since the high temperature requirement (∼900 °C) renders it less conducive to electrification through renewable energy sources. In this study, a novel, low-temperature (∼450 °C) pathway for ultrafast calcination of limestone using combustion synthesis or self-propagating high-temperature synthesis (SHS) is developed. SHS leverages exothermic heat from the combustion of lignin or biomass—as low-carbon fuels—mixed …

Design And Function Of Thermoresponsive-Ultrafast Stiffening Suspension Formulations For 3d Printing, Sharu Bhagavathi Kandy, Sebastian Remke, Thiyagarajan Ranganathan, Shubham Kiran Wani, Xiaodi Dai, Narayanan Neithalath, Aditya Kumar, Mathieu Bauchy, Edward Garboczi, Torben Gädt, Samanvaya Srivastava, Gaurav Sant

Materials Science and Engineering Faculty Research & Creative Works

An inability to accurately control the rate and extent of solidification of cementitious suspensions is a major impediment to creating geometrically complex structural shapes via 3D printing. In this work, we have developed a thermoresponsive rapid stiffening system that will stiffen suspensions of minerals such as quartz, limestone, portlandite, and Ordinary Portland Cement (OPC) over a wide pH range. When exposed to trigger temperatures between 40 °C and 70 °C, the polymer binder system undergoes a thermally triggered free radical polymerization (FRP) reaction, leading to an ultrafast stiffening of the suspension at an average rate on the order of 1 …

Rheology And Early-Age Structure Development In Binary And Ternary Blends Modified With Novel Graphene Types, Sahil Surehali, Collin Gustafson, Sayee Srikarah Volaity, Ranjith Divigalpitiya, Aditya Kumar, Narayanan Neithalath

Materials Science and Engineering Faculty Research & Creative Works

Interest in the use of graphene to enhance the properties of cementitious materials is growing, but major impediments in implementation are the cost of graphene and changes in binder rheology attributable to these nanomaterials. This study explores the influence of novel, cost-effective, environment-friendly, and mass-producible graphene on the rheology and early-age structure development of cementitious binders. Two novel graphene types—fractal graphene (FG) and reactive graphene (RG)—are used in plain cement mixtures as well as those containing 30 % (by mass) of fly ash and/or limestone powder, at low dosages of ≤0.02 % by mass of binder. The early- and later-age …

Thermally Stimulated Stiffening And Fly Ash's Alkaline Activation By Ca(Oh)2 Addition Facilitates 3d-Printing, Xiaodi Dai, Sharu Bhagavathi Kandy, Narayanan Neithalath, Aditya Kumar, Mathieu Bauchy, Edward Garboczi, Torben Gaedt, Samanvaya Srivastava, Gaurav Sant

Materials Science and Engineering Faculty Research & Creative Works

3D-printing could offer substantial benefits to the construction industry including the fabrication of customized/bespoke components, eliminating formwork, and reducing material waste. Despite these advantages, control of the pumpability, extrudability, and buildability of 3D-printed concrete (3DPC) remains challenging. This study demonstrates how the use of fly ash (FA) enables enhanced thermal stiffening, and rapid alkali-activation in the presence of portlandite (Ca(OH)2, CH). In general, blends of CH and FA exhibit less structural build-up at low temperatures, but upon reaching a trigger temperature of 75 °C, these blends achieve rapid stiffening, at rates of ∼800 Pa/s. The rapid stiffening arises from the …

Effects Of Gypsum And Limestone On Early-Age Hydration And Strength Optimization In Belite Calcium Sulfoaluminate Cement, Sai Akshay Ponduru, Bryan K. Aylas-Paredes, Taihao Han, Advaith Neithalath, Narayanan Neithalath, Gaurav Sant, Aditya Kumar

Materials Science and Engineering Faculty Research & Creative Works

Belite calcium sulfoaluminate cement (CSAB), an alternative to Portland cement, exhibits excellent strength at both early and later ages. However, due to its high belite content, the carbon reduction from this type of cement is not sufficient when compared to other alternative cements. To further enhance CSAB's sustainability, this study investigates the performance of CSAB when partially replaced by low-carbon mineral additives (i.e., limestone and gypsum). The primary objective is to identify the optimal mixture design by incorporating gypsum and limestone to formulate a sustainable binder that maintains high compressive strength. The CSAB is replaced (with both additives) by up …

Rheology Of Alumina Suspensions Subjected To Alternating Current Electric Fields For Freeze-Casting, Sivakumar Chithamallu, Ruksana Baby, Jacob L. Jones, Dipankar Ghosh

Mechanical & Aerospace Engineering Faculty Publications

Alternating current (AC) electric field can extrinsically tune freeze‐cast microstructure, originating from field‐induced increase in viscosity of ceramic suspensions. However, the changes that occur in a ceramic suspension and rheological behavior, ultimately affecting freeze‐cast microstructure, are not well understood. Moreover, the effects of AC electrokinetic forces and temperature on viscosity need to be decoupled. The viscosity and temperature of ceramic suspensions subjected to AC field and direct heating were measured, revealing that the increase in viscosity is due to AC dielectrophoretic forces rather than field‐induced heating of suspension. The shear thinning behavior of suspensions characterized using a power‐law model reveals …

Ultrafast Belite (Β-C2s) Production Using Biofuel-Based Combustion Synthesis, Shubham Agrawal, Sayee Srikarah Volaity, Oluwadamilare Charles Adesina, Bryan K. Aylas-Paredes, Taihao Han, Srinivas Kilambi, Aditya Kumar, Narayanan Neithalath

Materials Science and Engineering Faculty Research & Creative Works

This study presents a novel low-temperature, combustion synthesis (CS) approach for the rapid production of belite-rich cements. CS leverages the exothermic heat released from the combustion of biofuels such as lignin and/or biomass, intermixed with pelletized limestone and quartz. At an imposed furnace temperature of ∼700°C (as opposed to 1200°C–1300°C required in a conventional kiln), the source materials are rapidly transformed to belite, resulting in energy, emissions, and economic benefits. This work explores the influence of various process parameters, viz., fuel types and contents, airflow rate, porosity, holding temperature, and holding time on the efficiency of CS-based belite synthesis. Through …

Investigating The Effects Of Fly Ash On The Properties Of Silica-Deficient High Alumina Materials, Sai Akshay Ponduru

Doctoral Dissertations

This research is made up of five studies mainly focused on attaining sustainability in high alumina cements like calcium aluminate cement (CAC) and calcium sulfoaluminate belite cements (CSAB) by partially replacing them with additives and supplementary cementitious materials (SCMs) like fly ash (FA). The first study focused on understanding the reaction kinetics of CAC and FA binders at different replacement levels (i.e. between 10%-to-50% by mass) and their effect on mechanical properties. It was also shown that the reactive nature of FAs can be determined by calculating a single parameter called number of constraints (nc) derived from topological constraint theory. …

Engineering Ceramic Ductility Into Aluminum Oxide, Krish Bhuva

Holster Scholar Projects

This project explores the enhancement of ductility in Aluminum Oxide (Al₂O₃) ceramics through microstructural engineering. The goal is to combine the hardness and stability of Al₂O₃ with enhanced ductility for diverse industrial applications. Inspired by the naturally occurring Itacolumite rock, known for its complex microstructure, this research aims to replicate similar microstructural features in engineering ceramics. By doping Al₂O₃ with Titanium Dioxide (TiO₂), Boron Nitride (BN), and a pore former, while employing innovative sintering techniques, we hypothesize that these modifications will lead to a measurable increase in ductility. Despite early challenges in achieving homogeneity in sintering, promising results were observed …

Molecular Modeling Of Phenolic Resin For Carbon-Carbon Composites, Ivan Gallegos

Dissertations, Master's Theses and Master's Reports

One of the most difficult challenges associated with space exploration is terrestrial atmospheric reentry due to the high thermal loads generated. Carbon carbon (C/C) composites have been used as heat shielding materials due to their high strengthto- weight ratio and thermal properties and their applications include heat shielding for various high temperature environments. C/C composites are manufactured by polymer-infiltration pyrolysis (PIP) via cycles of curing and pyrolysis of a prepreg which can be costly and take up to several days. Thus, C/C composites ideal candidates for computationally-driven optimization techniques, such as a multiscale Integrated Computational Materials Engineering (ICME) approach, by …

Atomistic Simulation Studies Of Thin Film Growth And Plastic Deformation In Metals And Metal/Ceramic Nanostructures, Reza Namakian

LSU Doctoral Dissertations

Despite the significant improvements in manufacturing and synthesis processes of metals and ceramics in the past decades, there are still areas in which the procedure is still frequently more of an art or skill rather than a science. Therefore, systematic and combined experimental and computational studies are required to facilitate the development of techniques that offer thorough understanding of the events taking place during manufacturing and synthesis processes. With regard to these issues, it is paramount to address microscale characterizations and atomic scale understanding of the events during fabrication processes. One of the focuses of this study is unraveling fundamental …

Evaluating The Effects Of Granulated Rubber And Glass Fibers In Polymer Concrete As A Structural Material For Wafer Grinding Machines, Kevin Gabriel Kuehn, Philip Randall Streeter

Materials Engineering

Polymer concrete is a composite material used to replace cast iron and steel in wafer grinding machines for vibration damping. During the grinding and lapping processes of manufacturing silicon wafers, excessive vibrations may cause subsurface damage which requires additional polishing and reduces yield. Nine compositions containing various levels of granulated rubber and glass fibers were manufactured. CRM WRF-10 granulated rubber was examined at 0%, 5%, and 10% and Corning Cem-Fil glass fibers were added at 0%, 0.5%, and 1% by weight. Smooth-On EpoxAcast 690 epoxy resin was held constant at 16% for each composition. Crushed granite aggregate from Martin Marietta, …