Materials Science and Engineering Commons^™

Performance-Based Seismic Design And Retrofitting Via Drift And Strain Criteria, Tharwat A. Sakr, Hanaa E. Abd-El-Mottaleb, Shrouk S. Kamel

HBRC Journal

In recent decades, the demand for seismic code updates has significantly increased. Performance-based seismic design (PBSD) is a modern approach to earthquake-resistant building construction. By using this technique, the designers can establish performance targets that satisfy the owner. Most codes rely on strength design that utilizes a design response spectrum, highlighting serviceability without addressing performance levels. In this paper, an appraisal for the incorporation of PBSD into the Egyptian Code is proposed using nonlinear static and dynamic analysis. At first, response spectrum charts for 72, 475, and 2475 years return periods (RP) were developed based on the Egyptian seismicity information. …

Place Personality And User Behaviour: Insights From Cairo’S Streets, Sara Sabahy, Zeina Elzein, Doaa Abouelmagd

HBRC Journal

A place’s personality is beyond the sum of its characteristics. It’s how people perceive it on a human level, hoping for a better understanding and seeking connection. This study aims to understand how people connect with public spaces to enhance the quality of urban life.

A place’s personality extends beyond its physical attributes—it reflects how people emotionally perceive and connect with it. This study investigates the relationship between the perceived personality of urban streets and users’ behaviour to enhance the quality of urban life in Cairo. Focusing on Downtown Cairo and New Cairo, it addresses a gap in destination personality …

Spectroscopic Investigations On Polyvinylidene Fluoride Nanofibers, Parinaz Amaniabdolmalaki, Jui Vitthal Kharade, Alexandro Trevino, Lydia Morales, Karen Lozano, Victoria Padilla, Karen S. Martirosyan, Horacio Vasquez, Mircea Chipara

Physics & Astronomy Faculty Publications

The production of polyvinylidene fluoride nanofibers by force-spinning from polymer solutions was confirmed by electron microscopy. The structural and phase characteristics of the resulting nanofiber mats were examined using Fourier Transform Infrared Spectroscopy in Attenuated Total Reflectance mode, Raman spectroscopy, and X-ray Diffraction. Results from all these techniques consistently indicated that both the powder and the mats of polyvinylidene fluoride predominantly contain the α phase, with a small admixture of the β phase. Within experimental errors, no other phases were noticed both in the powder and in the as-obtained mats. The ratios of the areas of the Raman lines at …

Reproducible Semantic Data Management Workflow For Materials Data Science: Generating Knowledge Graphs With Robust Fairifcation Pipelines, Kyle R. Henrikson, Van D. Tran, Meredith Francis, Isabella Giammattei, Quynh D. Tran, Laura S. Bruckman, Erika I. Barcelos, Roger H. French

Student Scholarship

Combining data from multiple sources is crucial for efficient knowledge aggregation in materials data science. FAIR data from ontology and Linked Data principles enable this. Semantic data management streamlines data exchange and aggregation, ensuring information is available and extractable. FAIRLinked and GraphDB provide solutions for consolidating, hosting, and extracting meaningful insight from multimodal data.

Rheology-Guided Spinnability In Emulsion Forcespinning Of Water-In-Oil Nanofibers: Influence Of Surfactants And Internal Phase Concentration, Saptasree Bose, Alexandra Salinas, Evelyn Torres, Jose Ramirez, Elizabeth Gamez, Michelle A. Calabrese, Karen Lozano, Victoria Padilla

Mechanical Engineering Faculty Publications

This study explores the emulsion Forcespinning (FS) approach for fabricating nanofibers with a hydrophilic phase encapsulated within a hydrophobic polymer matrix. Key factors influencing fiber production and morphology, including the concentration of the internal water phase and the presence of ionic and nonionic surfactants, were systematically investigated. Additionally, the centrifugal spinnability of the emulsions was assessed using environmentally controlled dripping-onto-substrate (DoS) rheometry, correlating the observed extensional flow behavior and emulsion extensibility with fiber spinnability. The nanofibers were characterized by scanning electron microscopy (SEM), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and Fourier transform infrared (FTIR) spectroscopy. These findings offer critical …

Data Set, R Scripts And Script Outputs For Manuscript: Manufacturing Systems: Characteristics And Dynamics, Alan J. Fitzmorris

Graduate Research Data

This file repository contains fifteen computer-generated datasets, two naturally occurring datasets, nineteen shipbuilding shop datasets, and sixty-one concrete plant datasets.  Each data set contains subdirectories associated with various aspects of the data analysis, including stationarity analysis, dynamic system analysis, and complexity analysis.  In each case, applicable R scripts are included.  The text file entitled “Directory_and_File_Names” depicts the directory structure and associated file names for a total of 225 directories encompassing 8008 files.

Detecting And Repairing Conflicting Constraints In Co-Trained Physics-Informed Neural Networks For Composite Curing Processes, Cooper J. Evans

Dissertations, Master's Theses and Master's Reports

Composite materials have become a critical component of modern manufacturing, especially in the automotive and aerospace industries. The curing process for these composites has been modeled using a variety of partial differential equations representing the heat transfer and composite curing kinetics. Optimizing the applied temperature profile is critical for maximizing the efficiency and capacity of composite part manufacturers. Constraints must be placed on the inputs and outputs of the model, including but not limited to, the applied temperature profile, part temperature, and final degree of cure. Conflicting sets of constraints are easy to unknowingly impose due to the highly coupled …

Raw Data For The Manuscript "Silicon-Stabilized Three-Dimensional Covalent Networks In High Entropy Diborides", Michael Yeung, Reza Mohammadi

Chemistry Department Faculty Scholarship

Abstract for data:

Raw data for the journal publication, Silicon-stabilized three-dimensional covalent networks in high entropy diborides. ReadMe file provided.

Abstract for Journal publication: 

High entropy ceramics offer a pathway to stabilize unconventional chemistries beyond traditional alloying rules. We report the incorporation of silicon into an AlB₂-type high entropy diboride, Cr_0.2Nb_0.2Si_0.2Ta_0.2Ti_0.2B₂, despite silicon violating classical Hume-Rothery rules for alloying. Arc melting produced a phase-pure, chemically homogeneous structure, as confirmed by powder X-ray diffraction (pXRD) and scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM–EDS). Silicon occupies …

Stiffening Of Soft Silicone Upon Deep Uv Treatment As Characterized Using Nanoindentation, Amanda Wilder, Zaria Booth, Caden Obermeyer, Saika Sharmin, Venkat Maruthamuthu

Mechanical & Aerospace Engineering Faculty Publications

Silicones are elastomers that have a wide variety of uses, including biomedical applications such as the coating of biomedical devices and as implants. Soft silicones with mechanical properties similar to those of biological tissues have particularly gained use as substrates for cell culture in mechanobiology studies. In this context, it would be desirable to be able to alter their surface mechanical properties with a relatively simple physical treatment. While deep ultraviolet (deep UV) or ultraviolet C (UV-C) treatment has been previously used as a surface treatment method for stiffer silicones formulations, the effect of this treatment on soft silicones relevant …

Examination Of Laser Microwelding As A Technique For The Repair Of Steel Castings, Allan John Woldow

Masters Theses

"Metal castings have long been plagued with minor defects caused by various process and design conditions. Commonly, minor defects are not seen until after machining operations have been completed, and by the time they are identified, they cannot be salvaged in a manner that is structurally sound and does not have other detrimental effects on the product. Detrimental effects may include warping from high heat input in traditional welding, warping from reheat treatment, oxidation of machined surfaces, microstructural anomalies, and reduced mechanical properties. Micro laser welding has the potential to provide a solution to these issues by providing a low …

Specialty Glass Fibers For Optical Applications, Theodore Carver Lewis

Masters Theses

"Fibers were draw from melts of a commercial Na-aluminosilicate for ion-exchange treatments. A process was developed to draw 100-meters of fiber with a diameter of 100±10m. The fibers were sectioned for ion exchange treatments. SEM analysis showed an ion penetration depth of 45um after 4 hours of ion exchange in a 400°C KNO3 salt bath. The pristine and ion-exchanged fibers were characterized by a two-point bend test in room temperature air with controlled relative humidity (RH) and faceplate velocities between 100 and 4000 μm/s to characterize fatigue effects. Pristine fibers tested in air (40% RH) at 4000 μm/s had failure …

Castrip Process Technology: Non-Grain Oriented (Ngo) Si Steels Extension And Carbide-Free Bainitic (Cfb) For Flat Products, Naram Naidu Meesala

Masters Theses

"This research explores the development of advanced steel grades manufactured through Castrip® twin-roll thin strip casting technology, with particular attention to non-grain-oriented electrical Si-Steels (NGOES) and carbide-free bainitic (CFB) steels. The Castrip® process offers a near-net-shape route for producing thin steel strips, which greatly decreases the number of processing stages, lowers energy demand, and reduces carbon dioxide emissions when compared with traditional steel production methods.

In the NGOES part of the study, several industrial Fe–Si steel compositions were cold rolled to final thicknesses ranging from 0.35 mm to 0.15 mm. These materials were then exposed to short-duration continuous annealing at …

Optical Fiber Eaf Refactory Lining Temperature Monitoring For Safety And Operating Efficiency, Manoj Kumar Pullagura

Masters Theses

"Electric arc furnace (EAF) sidewalls experience severe thermal, chemical, and mechanical loading, especially near burner and injector regions where refractory wear and water ingress from damaged cooling components pose safety risks. Conventional thermocouples and resistance temperature detectors provide reliable point measurements but lack the spatial resolution needed to capture steep gradients and localized anomalies. This research investigates embedded optical fiber sensors for high-resolution temperature monitoring of EAF refractory safety linings to support early water-leak detection and assessment of refractory thermal behavior. A combined Rayleigh backscattering-based optical frequency domain reflectometry (OFDR) and fiber Bragg grating (FBG) approach was evaluated through laboratory …

Strontium Titanate For Capacitor And Energy Storage Applications At Cryogenic Temperatures, Hung Trinh

Doctoral Dissertations

This study investigates the dielectric properties of single crystal and ceramic strontium titanate (SrTiO₃) for cryogenic capacitor applications from room temperature to 4 K. Permittivity (k) and loss tangent are dependent on temperature, frequency, mechanical stress, and applied DC electric field. Accordingly, the dielectric constant and loss tangent were measured at various frequencies and DC bias levels. Loss tangent data are also presented as equivalent series resistance (ESR). For single crystal SrTiO₃, an impurity level of ≈500 ppm barium resulted in an increase of the maximum permittivity to approximately 50,000 at 6 K. This relatively high …

Critical Parameters Controlling Oxide Scale Formation And Hydro-Descaling Efficiency During Steelmaking, Tochukwu Princewill Ojiako

Doctoral Dissertations

In modern steelmaking, cast slabs are exposed to high-temperature oxidizing environments during secondary cooling, reheating, and hot rolling, resulting in the formation of multilayer oxide scales on the steel surface. These scales interact with mold-flux residues originating from the casting process (CC). The morphology, chemistry, and adhesion of oxide scale strongly influence its removability during high-pressure hydraulic descaling and ultimately determine the surface quality of hot-rolled products. However, the mechanistic relationship between oxide scale evolution, scale-steel interfacial structure, and hydraulic descaling performance remains poorly understood.

This dissertation investigates oxide scale formation, modification, and removal in low-carbon thin-slab steels produced by …

Zirconium Carbide Based Materials For Extreme Aerospace Environments, Nathaniel Hyman Blatt

Doctoral Dissertations

This research focuses on the processing and properties of zirconium carbide-based materials to promote their use in extreme environment aerospace applications, including nuclear thermal propulsion and hyper sonics. Several carbide systems including ZrC, ZrC-Mo cermets, (Zr, Nb)C, and a high entropy carbide were developed. The ZrC-Mo cermet was studied extensively to understand the effect of starting carbide grain size on the final microstructure, composition, elastic moduli, hardness, fracture toughness, room and elevated temperature flexural strength, thermal diffusivity, electrical resistivity, thermal expansion coefficient, and thermal conductivity. It was shown that heat transport in the cermets was dominated by the ZrC phase …

Investigations In Hydrogen Ironmaking, Joseph William Govro

Doctoral Dissertations

The purpose of this research is to contribute to the Grid Interactive Steelmaking with Hydrogen (GISH) project. This research investigates the viability of both producing and melting Direct-Reduced Iron (DRI) utilizing hydrogen. Conventional CO reduced DRI will be referred to as “C-DRI” and DRI produced using hydrogen gas will be referred to as “H-DRI”.

An H-DRI pilot plant was constructed in Golden Colorado. The pilot plant was commissioned and successfully operated four campaigns. Process improvements were made throughout the campaigns and the process was optimized. In addition to running the pilot plant in a pure hydrogen condition, the pilot plant …

Charge‐Governed Mechanistic Evaluation Of Aav2 Clarification Via Functionalized Flat Sheet And Hollow Fiber Deconstructed Depth Filters, Mara Baughman‐Leach, Mattie Brock, Malgorzata Chwatko, Dibakar Bhattacharyya

Chemical and Materials Engineering Faculty Publications

The expansion of adeno-associated virus (AAV)-based therapeutics has increased the demand for efficient clarification. In this study, a functionalized deconstructed depth filtration platform was developed to dissect how membrane–virus charge, modulated by pH, influences separation. Three charge regimes, positive (pH 4), neutral (pH 6), and negative (pH 8) between the membranes and AAVs, were examined. The flat-sheet system, composed of sequential 1.2, 0.8, 0.45, and 0.1 µm membranes, enabled the first layer-by-layer analysis of depth filtration behavior. This revealed that Stage 1 and Stage 4 dominate clarification. Remarkably, substantial DNA capture (> 75%) was observed even in the largest-pore stage, …

Creep-Recovery Behavior Of Copper Springs At Low Stresses, Ming-Yen Tsai, Shou-Yi Chang, Yi-Chia Chou, Jyun-Lin Hu, Yulin Zhang, Fuqian Yang, Sanboh Lee

Chemical and Materials Engineering Faculty Publications

Copper springs, unlike conventional wires, endure complex stress states such as torsion and bending under sustained thermal and mechanical loads. This study examines the time-dependent creep-recovery behavior of copper springs under low tensile forces at temperatures ranging from 523 K to 623 K, focusing on springs with spring indexes (ratio of mean spring diameter to wire diameter) of 6.4, 8.5, and 9.6. The non-linear Burgers model with a Kelvin solid effectively captures the deformation response and mirrors dislocation nucleation and annihilation kinetics. SEM and TEM imaging reveal that low-angle grain boundaries (LAGBs) act as both dislocation sources and sinks. The …

Electron Beam Irradiation Effects On Bulk Metals: A Comparative Study Of Polycrystalline Versus Single-Crystalline Structures, A. A. Elmustafa, N. A. Sultana, A. H. Al-Allaq, M. Ojha, Y. S. Mohammed, J. Vennekate, H. Baumgart

Mechanical & Aerospace Engineering Faculty Publications

This study investigates the effects of electron beam (e-beam) irradiation on the mechanical and structural properties of eight bulk metallic samples, comprising both polycrystalline (PC) and single-crystalline (SC) forms of Ni, Cr, V, and Ti. These metals were evaluated as potential candidates for beam exit windows in high-power (MW-class) particle accelerators. The primary objective is to identify metals capable of withstanding the conditions of high-power/MW-class e-beam accelerators and serve effectively as exit windows. Selection criteria were based on each metal’s intrinsic properties, power dissipation capability, and irradiation-induced changes in mechanical behavior, including hardness, elastic modulus, and defect density. Comprehensive characterization …

Sulfhydryl-Functionalized Diarylethenes: Synthesis, Photoswitching, And Fluorescent Properties, Pramod Aryal, Jonathan Bietsch, Gowri Sankar Grandhi, Josh Choi, Guijun Wang

Chemistry & Biochemistry Faculty Publications

Sulfhydryl group (SH) plays important roles in reactions with various functional groups, especially in biologically active systems. Photoswitchable diarylethene (DAE) derivatives have demonstrated applications in many research fields. Among the many classes of diarylethene derivatives, thiol derivatives have not been extensively explored. In this study, we systematically synthesized and characterized a series of bis-thiol functionalized dithienylethene derivatives. The thiol groups in this series are attached directly to the thiophene, or through a phenyl or methylene linker. Each series incorporated both dithienyl cyclopentene and hexafluorocyclopentene bridges and total six thiol substituted diarylethenes were synthesized. Among the six sulfhydryl DAE derivatives, four …

Multidentate Surfactant-Dependent Synthesis Of Giant Iridium Superstructures, Ramjee Balasubramanian, Maeren E. Hill

Chemistry & Biochemistry Faculty Publications

Giant superstructures of iridium, comprised of smaller spherical and slightly larger anisotropic nanoparticles, were synthesized by reducing iridium chloride in the presence of resorcinarene, a class of tetrameric macrocyclic polyphenols, with sodium borohydride in ethanol in 30 min under mild conditions. These superstructures were characterized by a range of techniques including TEM, HRTEM, EDS and other spectroscopic methods. The impact of the macrocyclic surfactant, its features and reaction conditions in dictating the formation of giant iridium superstructures was evaluated. The packing density of nanoparticles in these giant iridium superstructures could be altered qualitatively by varying the duration of the reaction, …

The Effect Of Aluminum Substrate Surface Topography And Surface Energy On The Peel Strength Of Polyurethane Coatings, Christopher Ryan Grivers

Open Access Master's Theses

CUI information not included.

Peel Strength Of Polyurethane Coated Marine Metals In Air And In Underwater Environments, Maximillian Hill

Open Access Master's Theses

This study aims to characterize the hydrostatic peel strength of a hyperplastic material on three distinct and widely used marine-grade metals, using a primer. Aluminum 6061, HY-80 steel, and Nickel 400 (commonly known as Monel) are among the more popular metals used in the marine industry due to their unique material properties. To better understand the relationship of these materials and how we might quantify them, a peel test is performed at varying curing temperatures.

Following the investigation into varying curing temperatures, several specific marine environments will be considered. Submersible marine vehicles are designed to operate in a range of …

Field-Assisted Post-Processing Of Cold-Sprayed Pure Copper, Alan Hensley

Theses and Dissertations--Mechanical and Aerospace Engineering

The properties of materials processed through cold spray, and many other AM processes, are non-uniform and unpredictable. In most cases, post-processing is required to achieve desired properties and better uniformity. In cold spray, the typical method is an annealing heat treatment (AHT), which can improve bond strength, reduce porosity, and restore ductility, among other effects. AHT alone, however, is unable to completely remedy any of the unfavorable properties. In addition, long treatments at high temperatures are often needed for satisfactory results. This increases energy consumption and extends production times for products made by the process. For these reasons, numerous investigations …

Mitigating Hysteresis In Metal-Coated Fibers Via Optimized Thermal Treatment For Advanced Distributed High-Temperature Sensing Applications, Koustav Dey, Rony Kumer Saha, Bohong Zhang, S. Narasimman, Farhan Mumtaz, Jeffrey D. Smith, Rex E. Gerald, Ronald J. O'Malley, Jie Huang

Electrical and Computer Engineering Faculty Research & Creative Works

Metal-coated optical fibers are widely employed in sensing applications owing to their superior mechanical strength and corrosion resistance. However, their calibration at elevated temperatures is hindered by hysteresis, manifested as discrepancies between heating and cooling cycles, primarily caused by residual strain from mismatched thermal expansion coefficients (TECs) between the metal coating and silica cladding. This research introduces an optimal heat treatment procedure aimed at minimizing the impact of the mismatch in TECs between the cladding and the coating materials that causes the residual strain in gold (Au) and copper (Cu) coated fibers for achieving reliable distributed high temperature sensing up …

Waveguide-Assisted Single-Mode Fiber Bragg Gratings In A Highly Multimode Coreless Fiber Via Femtosecond Laser Inscription For Extreme Temperature Quasi-Distributed Thermal Sensing, Farhan Mumtaz, Koustav Dey, Bohong Zhang, Jeffrey D. Smith, Ronald J. O'Malley, Jie Huang

Electrical and Computer Engineering Faculty Research & Creative Works

This research reports a potential quasi-distributed thermal mapping optical sensing system for extreme temperatures, leveraging femtosecond (fs) laser inscribed single-mode fiber Bragg gratings (FBGs) and a waveguide within coreless, highly multimode optical fiber, resulting in a single-mode structure. Unlike doped single-mode fibers, coreless fibers composed of silica rods prevent issues associated with dopant migration and ensure data accuracy. The strategic placement of point-by-point FBGs in a cascaded formation on the fs-laser inscribed waveguide facilitates localized multipoint sensing. The long-term stability of the proposed waveguide-assisted FBG system was assessed over 24 hours at elevated temperatures (1000°C), showing no hysteresis during heating …

Multiphysics Modeling Of Melt Pool Dynamics And Powder Bed Stability In Lpbf Of Inconel 718 For A Circular Cavity, Nayan Pundhir, Oluwapelumi O. Adejumo, Kumbla Chandrashekhara, Joseph W. Newkirk, Heath Misak, Cesar Ortiz Rios

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Laser powder bed fusion (LPBF) is a metal additive manufacturing process in which a concentrated laser beam selectively melts successive powder layers to fabricate components. Final part quality is highly sensitive to process parameters such as hatch spacing, powder bed density, laser power, and scanning speed. In this study, a computational fluid dynamics model employing discrete element method has been developed in FLOW-3D to simulate LPBF of Inconel 718. The modeled powder bed incorporates particle size distribution data obtained from scanning electron microscopy and is evaluated for single-layer, single-track deposition over a circular cavity. The model captured melt pool dynamics …

Development Of Stronger, More Extrudable 6xxx Series Alloys For Automotive Applications, Eli A. Harma

Dissertations, Master's Theses and Master's Reports

6xxx alloys are widely used in automotive extrusion structures for their high specific strength and formability. Advanced designs require greater formability and strength, creating an opportunity for high-strength, formable alloys. The 6xxx series forms β”-Mg₅Si₆ precipitates during age hardening and develops a fibrous microstructure during extrusion, both strengthening the alloy. Increasing Mg and Si to form more β” decreases formability. Thus, modifying texture can increase strength without reducing formability. Current alloys like 6005A add Mn and Cr to form dispersoids that inhibit recrystallization and promote strengthening textures; however, high Mn and Cr concentrations reduce formability. Replacing Mn …

Methodology Development For Evaluating Relative Heat Checking Resistance Of Open-Die Forge Tooling, Jack F. Schaller

Dissertations, Master's Theses and Master's Reports

Heat checking, characterized by biaxial networks of surface cracks induced by thermomechanical cycling, can cause premature failure of open-die forge tooling. To facilitate the evaluation of heat checking resistance of die steels, a simulation‑informed out-of-phase thermomechanical fatigue (OP-TMF) testing methodology was developed using 4330V steel as a baseline material. Temperature‑dependent material properties and flow stress data were collected and compiled into a material data file for use with finite element analysis software. Forging and cooling scenarios were simulated across a range of die preheat temperatures. Temperature and in-plane strain histories extracted from the die surface provided a foundation for laboratory …