Materials Science and Engineering Commons^™

Modeling And Estimation Of Co2 Capture By Porous Liquids Through Machine Learning, Farid Amirkhani, Amir Dashti, Hossein Abedsoltan, Amir H. Mohammadi, John L. Zhou, Ali Altaee

Chemical and Biochemical Engineering Faculty Research & Creative Works

Porous liquids (PLs) are newly developed porous materials that combine unique fluidity with permanent porosity, which exhibit promising functionalities. They have shown ability to efficiently absorb greenhouse gases such as carbon dioxide (CO₂). Experimental measurement is one approach to determining the solubility of various greenhouse gases in PLs, which has drawbacks such as being expensive and time-consuming. Hence, simulation models are valuable to predict the solubility of CO₂ in various PLs. This work aims to develop machine learning (ML) modeling methods for accurately estimating CO₂ solubility under varying conditions (e.g. PLs, temperature, pressure). Adaptive Neuro-Fuzzy Inference …

Investigating The Properties Of Eco-Bricks Composed Of Sawdust, Bamboo, And Varying Composition Of Sugarcane Bagasse Ash And Portland Cement, Wilfred Victor C. Marasigan, Julia Sophia Antonia S. Encarnacion, Czyrus Michael A. Bajeta, Alijah F. Gonzales, Juan Carlo T. Gumangan

Sinaya: A Philippine Journal for Senior High School Teachers and Students

With the construction industry contributing nearly 40% of global greenhouse gas emissions, there is a growing need for innovative and sustainable building materials. This research investigates a new eco-friendly concrete brick incorporating sugarcane bagasse ash (SCBA), sawdust, and bamboo fibers. Three eco-brick mixtures, each containing 2% bamboo fiber and 10% sawdust by weight but with varying proportions of Portland cement (PC) and SCBA, were tested against a standard brick for compressive strength, flexural strength, and water absorption. The optimal mixture, with 2% bamboo fiber by weight, 10% sawdust by weight, 85% PC, and 15% SCBA, exhibits compressive and flexural strength …

Shrinkage Study In Photopolymerisable Hybrid Sol-Gel Through Holographic Patterning, Jamshed Aftab, Izabela Naydenova, Tatsiana Mikulchyk

Articles

Photopolymerisation induced shrinkage of holographic materials is one of the main factors which needs to be considered for designing holographic optical elements (HOEs) with high accuracy in light redirection with maximum efficiency. This work studies the shrinkage in photopolymerisable hybrid sol-gel (PHSG) by examining the properties of volume transmission gratings recorded in PHSG layers. It explores both the dependence of shrinkage on the holographic grating parameters (thickness, spatial frequency, slant angle) and the effect of material aging. By using the fringe-plane rotation model, shrinkage is found to have the maximum value of 1.37 % at 765 lines/mm (19.36° slant angle) …

Treatment And Activation Effects On Kaolinite-Based Earth Concrete, Mojtaba Kohandelnia, Maroua Zerzouri, Ammar Yahia, Kamal H. Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Self-consolidating earth concrete (SCEC) addresses the long construction process of conventional earthen constructions and their structural limitations, while further efforts are needed to enhance its sustainability. This study explores the development of a kaolinite-based self-consolidating earth paste (SCEP) due to their blended powder system, incorporating raw and treated (calcined and ground-calcined) kaolinite under various activation techniques, such as water hydration, sodium hexametaphosphate (NaHMP), and sodium hydroxide (NaOH) activation. The synergistic effect of calcination and mechanosynthesis on rheological, mechanical, structural, and microstructural properties of SCEP were investigated. Mechanically treated kaolinite increased yield stress, plastic viscosity, storage modulus evolution, and build-up index, …

Measurement And Process Relation For Cast Surface Defects, Nachiket Laxman Shinde

Masters Theses

This thesis presents an in-depth investigation into the classification and prediction of surface defects in aluminum sand castings using a combination of experimental trials and machine learning techniques. Key process variables such head height, pouring temperature, resin %, sand type and process were systematically varied to study their influence on defects like veining, and burn-on. Comparative analysis indicated superior performance of the deep learning model in handling nonlinear interactions between process parameters. The study emphasizes the importance of integrating data-driven models with foundry practices to enhance surface quality, reduce rework, and support intelligent decision-making in casting operations.

Design Principles For Robotic-Controlled 3d Printing Of Soft Tissue-Mimicking Materials, Karina Mealey

Master's Theses

Geometrically and physically accurate 3D models are emerging as essential tools for surgeons in pre-operative planning and training, but current methods of producing these models are not sufficient. Existing solutions have downsides such as high costs, long and tedious production times, high complexity resulting in a lack of scalability, or an inability to meet material requirements for accurately simulating human tissue.

The objective of this work is to develop principles for a low-cost, easy-to-use 3D printing system capable of prototyping with soft tissue-mimicking materials. To pursue this goal, a MyCobot280 robot arm was used as the mechanism to explore the …

Model-Based Design Of Compressed Lithium-Metal Pouch Cell Battery Modules For Evtol Applications, Scott J. Stirling

Master's Theses

Batteries with higher specific energy and power are essential for extending the range and performance of electric vertical takeoff and landing aircraft (eVTOLs). Anode-free lithium-metal pouch cells offer strong potential at the cell-level but require high compressive pressures to enhance cycle life and discharge performance. These pressures necessitate heavier structural components, reducing packaging efficiency at the module level.

To evaluate this tradeoff, a full-factorial enumeration model was developed to explore viable module designs within a constrained packaging volume. The model scales subsystem masses, enforces design rules and material limits, and accounts for large (~20%) cell thickness changes during cycling.

Results …

Low Earth Orbit Drag Sail Degradation Due To Atomic Oxygen And Ultraviolet Radiation, Hannah Rost

Master's Theses

As the orbital debris population increases, so does the risk of collisions with operational spacecraft. In response, the Federal Communications Commission has shortened the deorbit requirement from 25 years to five years. While natural atmospheric decay was sufficient under the previous guideline, many objects with low area to mass ratios can no longer passively comply. Smaller, non-propellant-carrying space objects such as CubeSats lack the ability to maneuver and must rely on alternative deorbit methods. One proposed solution is to deploy a drag sail at end of life to increase atmospheric drag and accelerate orbital decay. However, exposure to atomic oxygen …

In-Situ Defect Detection In Selective Laser Melting Using Convolutional Neural Networks, Ethan Gaigalas

Master's Theses

This thesis develops and trains a convolutional neural network (CNN) to classify defects in metal parts produced by selective laser melting (SLM) using acoustic emission (AE) data. The model successfully identified porosity and standard build layers with high accuracy but consistently struggled to classify lack of fusion (LOF) defects, regardless of input type, normalization, or class count. These results suggest that while AE signals contain distinguishable features for certain defect types, LOF signals may be too subtle or inconsistent for reliable detection. The study addresses the ongoing challenge of in-situ quality monitoring in metal additive manufacturing, where defects like cracks, …

Investigation Into Silicone-Silicate Conversion Due To Atomic Oxygen In The Low Earth Orbit Environment, Justin T. Self

Master's Theses

Silicones have been widely used over the years in spacecraft for a variety of functions, but atomic oxygen (AO) exposure in Low Earth Orbit causes a silicate (SiO₂) surface layer to rapidly develop on the silicone which results in a permanent change in its thermal and optical properties. Although this silicone to silicate conversion is known to occur, statistical predictions of layer formation as a function of time on orbit are not found in literature. This thesis utilized optical and scanning electron microscopy, Fourier-Transform Infrared Spectroscopy, diffuse reflectance spectroscopy, and nonlinear regression statistical techniques after RF plasma asher …

Thermomechanical And Thermal Characterization Of Pressureless Sintered Tib2, Simone Taraborelli, Simone Failla, Diletta Sciti, Steven M. Smith, Jeremy Watts, William G. Fahrenholtz, Greg E. Hilmas

Materials Science and Engineering Faculty Research & Creative Works

The impact of high-energy milling using WC[sbnd]Co media on the pressureless sintering and properties of TiB₂ was studied. After 30 mins of milling, samples sintered at 2200 °C achieved a high relative density (>98 %) and a fine mean grain size (<2 >µm). In the microstructure WxBy phases, often containing Co, were observed at triple points, due to contamination from the milling media. Moreover, core-rim structures with multiple rims were detected: the cores consisted of pure TiB₂ grains, the rims were (TixWy)B2 solid solutions. The core-rim formation was significantly more pronounced compared to a reference sample of …

Student-Led Video Podcasting In A Chemical Behavior Of Materials Course, Erick Salvador Vasquez

Chemical and Materials Engineering Faculty Publications

Video podcasts, or vodcasts, are a form of podcasting that combines video and audio to deliver various types of educational content effectively. To our knowledge, very few studies have focused on student-produced podcasting for learning technical engineering concepts. This study explores using student-created technical videos in a course on the chemical behavior of materials through three separate assignments. The first assignment centered on sustainability aspects. Students, divided into groups of three, were tasked to review two influential journal articles on plastic waste input into the ocean and metal recycling. Each group had to prepare and deliver a technical script about …

Degradation Characterization Of Nopal-Based Biopolymer Made From Opuntia Sp. Juice, Beeswax, Animal Protein, And Polyvinyl Alcohol, Logan Williams, Mary Elizabeth Holland, Spencer Williams

Materials Engineering

Since the introduction of polymers in the 1960s, there has been an exponential increase in use. Driven by rapidly growing demand, the volume of polymers in the production, application, and end-of-life stages has surged. The widespread use of these materials has led to escalating environmental pollution, which disrupts ecosystems, and contributes to global ecological degradation. While advancements in recycling technologies and infrastructure have shown promise, they have not maintained pace with polymer production and disposal. This imbalance warrants research into sustainable alternatives. Environmentally benign polymers derived from renewable sources and exhibiting minimal ecological impact at the end of their life …

Chemical Recycling Of Pet Plastic Waste, Charlie Parker, Benjamin Puga, Jake Verschoor

Materials Engineering

The growing accumulation of plastic waste, specifically polyethylene terephthalate (PET), has driven the need for more efficient and scalable chemical recycling methods. This study investigated the methanolysis of PET using zinc oxide (ZnO) nanoparticles as a catalyst and tetrabutylammonium chloride (NBu₄Cl) as an ionic liquid, aiming to reduce methanol consumption while achieving high PET conversion efficiency. ZnO nanoparticles were synthesized via wet chemistry and characterized using Dynamic Light Scattering (DLS), which showed an average particle size of 13.5 nm with a polydispersity index of 0.1556, indicating a moderately-high monodisperse distribution of particles sufficient for reactions. The main conversion product, dimethyl …

Performance Evaluation Of Aminated Multi-Walled Carbon Nanotubes Incorporated With Green Synthesized Iron Nanoparticles For Toxic Dyes Sequestration From Textile Wastewater, Titus Chinedu Egbosiuba, Cynthia Chukwuemeka, Jonah Chukwudi Umeuzuegbu, Nwanneka Chibuzo Mmonwuba, Ugochukwu Ewuzie, Monday Uchenna Okoronkwo, Valentine Chikaodili Anadebe, Saheed Mustapha, Ambali Saka Abdulkareem, Jimoh Oladejo Tijani, Ashish Patel, Virendra Kumar Yadav

Chemical and Biochemical Engineering Faculty Research & Creative Works

This study evaluates the performance of aminated multi-walled carbon nanotubes (AM-MWCNTs) integrated with zerovalent iron nanoparticles (ZVI) synthesized using cashew leaf (Anacardium occidentale) extract (AM-MWCNTs@ZVI) for the removal of Congo Red (CR) and Methylene Blue (MB) dyes from textile industrial wastewater. The nanocomposite was characterized using FTIR, XRD, BET, HRSEM, and HRTEM analyses, confirming its functional groups, crystalline structure, and enhanced surface area of 1050.4 m²/g. The ecological risk degree of the textile pollutants was assessed to determine the percentage concentrations of crystal violet, Congo red, methyl orange, methylene blue and rhodamine B. Batch adsorption experiments identified optimal …

Multimodal Self-Folding Of Shape Memory Polymer Using Laser Induced Graphene, Liam Harrison Drew

Master's Theses

Shape memory polymers (SMPs) can undergo programmed shape transformations when heated above their glass transition temperature (T_g), enabling actuation through stimuli such as infrared (IR) radiation and Joule heating. These materials are promising for deployable systems and soft robotics due to their lightweight structure and elimination of traditional mechanical components. While IR-based actuation is simple and low-cost, it lacks precision in uncontrolled environments. Joule heating offers improved control but is often limited by conductive ink properties such as thickness, stiffness, or poor adhesion. This work introduces a novel method for multimodal SMP actuation using laser-induced graphene (LIG) transferred …

Energy Conversion Materials: Computational Design Of Electrocatalysts Toward Sustainable Energy Applications, Courtney M. Brea

Dissertations, Theses, and Capstone Projects

As the global-scale need for sustainable energy technologies emerges due to anthropogenic climate change, electrocatalysis plays a crucial role in facilitating many sustainable processes. Several heterogenous cathode materials can perform different electrochemical activities using water, oxygen, hydrogen, carbon dioxide to deliver renewable electricity and value-added chemicals. By using the density functional theory method, it is possible to explore the structural and electronic properties that govern a catalysts’ activity and selectivity. In this thesis, we start by exploring 48 reconstructed transition metal dichalcogenides edges (MX₂, M = Mo, W; X = S, Se, Te) for carbon dioxide reduction reaction …

Effect Of Manufacturing And Machining Process On Recycled Composite Connecting Rods Under Tension And Compression, Walter W. Oppelt

Master's Theses

Carbon fiber reinforced polymer (CFRP) is an engineering material renowned for its high-strength and low-density material properties. Such properties make CFRPs especially useful for applications across many industries, including aerospace, automotive, marine, sporting goods, oil and gas, and more. However, with such favorable material properties comes the cost of high energy usage required to produce raw carbon fiber. Recycled carbon fiber (rCF) has emerged as a promising alternative, offering a significant reduction in energy usage. This research explores the viability of applying recycled CFRPs to internal combustion engines to both reduce energy costs during manufacturing and while in use. Mechanical …

Ni-Mn-In Heusler Alloy Ribbon For Magnetocaloric Application, Bao Nguyen

Masters Theses

A traditional cooling system, which applies compression technology within the working fluid, has had a lot of negative impacts on the environment and has low efficiency. They have almost reached the thermodynamic efficiency; there is little room for further improvement. Therefore, solid-state cooling systems, especially those that use the magnetocaloric effect (MCE), have drawnmuch interest as an alternative solution for the vapor-compression system. The Heusler alloy, especially Ni-Mn-In in this research, can be an excellent candidate for this application due to its unique properties, such as the shape memory effect and giant MCE. Their giant MCE results from a first-order …

3d Printed Fixed Wing Aircraft Competition, Sidney E. Long, Mitchell Heise, Jack Bride, Daniel Salinas

Mechanical Engineering

Cal State LA and Arlington University, Texas are hosting the same 3D printed, fixed wing aircraft competition for 2025. Cal Poly requires a competitive plane that can adhere to each rule and be piloted remotely to achieve the longest time in the air. The plane must utilize solely 3D printing technology for the wings, body, and all other structures. The only off-the-shelf components can be the motor and electronics, as well as mechanical devices such as hinges.

Thermal Modeling Techniques For Additively Manufactured Porous Metals, Lucas D. Rambo

Master's Theses

Advances in additive manufacturing have enabled the creation of metallic components with tailored porosity, offering design flexibility for thermal, structural, and fluid transport applications. This thesis investigates the effective thermal conductivity (ETC) of porous Inconel 625 (IN625) and Inconel-ceramic composites (IN625-RAM2) fabricated by Laser Powder Bed Fusion (LPBF) using Elementum 3D’s PermiAM technology. Experimental measurements of thermal conductivity using the laser flash method are compared to numerical models built from micro-computed tomography data. Simulations were performed using both finite element (FE) and finite volume (FV) methods to evaluate thermal transport in real microstructures. The study investigates the effects of micro- …

Comparative Study Of Experimental And Fea Strain Data For Cnt-Coated Fiberglass Sensors, Extensometers, And Metal Foil Strain Gauges, Omar Dwidar

Master's Theses

Material testing is essential across industries such as aerospace, automotive, and construction, playing a critical role in verifying material selection, diagnosing failures, and understanding the development of flaws in structures. These insights are key to designing successful, reliable systems. Conventional metal foil strain gauges are low cost and reliable but provide limited sensitivity with a typical gauge factor around 2. Extensometers provide highly sensitive strain measurements with the disadvantage of a bulky form factor. With advanced materials such as carbon nanotubes, it is possible to manufacture a sensor with the sensitivity closer to that of an extensometer with the small …

Myceli-Yum: Elucidating Structure-Property Relationships For Polymer Degradation By Mycelial Digestion, Jordan Scott Ford

Master's Theses

Since the industrial entrance of polymer plastic materials, plastic has become ubiquitous in both everyday use and waste. Due to inefficiencies and knowledge gaps, current recycling methods are not able to account for the high scale of plastic waste, resulting in the bulk of this waste being landfilled, mishandled, and deposited in the environment. Mycelium, the microorganism responsible for fruiting mushroom bodies and mold growth, holds potential to reduce plastic waste and can potentially be utilized as a method of industrial recycling. Following a drug-design approach, the active site of mycelial enzymes responsible for natural biopolymer degradation have been assessed …

Colloidal Quantum Dots: A Path Toward Making Mid-Wave Infrared Sensing A Ubiquitous Technology, Mohammad Mostafa Al Mahfuz

Dissertations

Reducing the size, weight, power consumption, and cost (SWaP-C) of infrared detectors could make infrared sensing more widely accessible. In the critical mid-wavelength infrared (MWIR) spectral range of 3-5 gm, commercially available detectors are limited by the high costs associated with epitaxial growth and hybridization, as well as the need for cryogenic cooling. These factors restrict their use to defense and space applications.

Colloidal quantum dots present a promising material for overcoming these challenges, with wafer-scale monolithic integration and Auger suppression being the key material capabilities to minimize the sensor's SWaP-C. Infrared sensors based on colloidal quantum dots have been …

Designing Between Worlds, Levon Kostandyan

Masters Theses

This thesis reimagines design as a means of cultural continuity—an act of memory, resistance, and transformation. Rooted in the diasporic Armenian experience, it explores how identity is carried not only through storytelling, but through materials, rituals, and objects that evolve across time and place. Through the transformation of pomegranate skin from waste into a meaningful design material, the project navigates the space between symbolism and substance, honoring both the fruit’s ancestral weight and its potential as a living material language.


The work moves between personal narrative, historical research, and material experimentation, engaging with themes of displacement, hybridity, and embedded knowledge. …

Interaction Of Liquid Phase Diisopropyl Methyl Phosphonate (Dimp) With Material Surrogates For Components Of Soil And Combustion Products Of Metal Fuels, Khushi Sunil Patel

Theses

Combustion products of three different Al-based materials, Al-CaCO₃, Al-SiO₂, and Al-Fe₂O₃ , have been produced to understand their interaction with liquid diisopropyl methyl phosphonate (DIMP), a surrogate for chemical weapon agents. The purpose of this is to see which materials were more effective at DIMP adsorption and decomposition at different temperatures. Prepared materials were characterized using electron microscopy, x-ray powder diffraction, and nitrogen adsorption. Prepared powders were submerged in DIMP and heated in a thermal analyzer, tracking the mass changes as a function of temperature. Surfaces of the recovered materials were studied using …

Fire Fossils: Biomineral Infrastructures In Untangling Climates, Tanmayee More

Masters Theses

Diatoms drift, sediments sink, wildfires generate their own weather. Lightning strikes can blast sand into glass, and microscopic organisms do the same in the cold recesses of the ocean. What alchemies and metabolisms catalyze space, time, and energy? What are the thermodynamics of infrastructure in Climate Change?

Places, materials, and beings are afterimages. Through alchemical experiments, and multi-scalar imaging, I develop simulations of wildfires, and their profound, reverberating effects. In this thesis, a glass-meets-landscape experimental process enters these obscured conditions and renders new material relations for the built environment.

Building Ecologies: Maintaining Land, Working With Wood, Taylor Jais

Masters Theses

This thesis critiques contemporary architecture and building practices for their fundamentally unsustainable and place-less assemblies that rely on extracting finite resources that generate significant emissions while simultaneously neglecting to consider the needs and existence of humans and non-human species with in the built environment. Through experimental material research that diverts “wood” waste streams and integrates land and multispecies care, this work demonstrates how maintenance-based approaches to construction can transform built assemblies into ecological systems. By deconstructing wood to its cellular components and recombining these elements in novel ways, this research reveals possibilities for collaborative, materials-driven, place-based building practices. This thesis …

Understanding The Morphology And Mass Transport Resistance Of Mesoporous Carbon-Supported Pemfc Based On Modeling Analysis, Hao Deng, Jia Liu, Zhong-Jun Hou

Journal of Electrochemistry

Mesoporous carbon supports mitigate Pt sulfonic poisoning through nanopore-confined Pt deposition, yet their morphological impacts on oxygen transport remain unclear. This study integrates carbon support morphology simulation with an enhanced agglomerate model to establish a mathematical framework elucidating pore evolution, Pt utilization, and oxygen transport in catalyst layers. Results demonstrate dominant local mass transport resistance governed by three factors: (1) active site density dictating oxygen flux; (2) ionomer film thickness defining shortest transport path; (3) ionomer-to-Pt surface area ratio modulating practical pathway length. At low ionomer-to-carbon (I/C) ratios, limited active sites elevate resistance (Factor 1 dominant). Higher I/C ratios improve …

Preparation And Modification Of Mxene Composites For Application In Electrochemical Energy Storage, Zhang-Hai You, Ding-Ze Lu, Kiran Kumar Kondamareddy, Wen-Ju Gu, Peng-Fei Cheng, Jing-Xuan Yang, Rui Zheng, Hong-Mei Wang

Journal of Electrochemistry

With the acceleration of advanced industrialization and urbanization, the environment is deteriorating rapidly, and non-renewable energy resources are depleted. The gradual advent of potential clean energy storage technologies is particularly urgent. Electrochemical energy storage technologies have been widely used in multiple fields, especially supercapacitors and rechargeable batteries, as vital elements of storing renewable energy. In recent years, two-dimensional material MXene has shown great potential in energy and multiple application fields thanks to its excellent electrical properties, large specific surface area, and tunability. Based on the layered materials of MXene, researchers have successfully achieved the dual functions of energy storage and …