Open Access. Powered by Scholars. Published by Universities.®

Materials Science and Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

2025

Discipline
Institution
Keyword
Publication
Publication Type
File Type

Articles 181 - 210 of 971

Full-Text Articles in Materials Science and Engineering

Crack Propagation Behavior Of Polyurethane Grouting Sma Asphalt Mixtures, Ji Guoqi, Ma Hui, Zheng Junqiu, Huang Yujie Oct 2025

Crack Propagation Behavior Of Polyurethane Grouting Sma Asphalt Mixtures, Ji Guoqi, Ma Hui, Zheng Junqiu, Huang Yujie

Journal of China & Foreign Highway

To reveal the influence me chanis m of polyurethane grouting on the crack propagation behavior of SMA-13 asphalt mixtures, this paper first conducted a semi-circular bending (SCB) test to validate the effectiveness of the PFC2D discrete element model, which was employed to simulate the microscopic responses of mixtures under different notch positions and grouting conditions. The analysis focused on load-displacement curves, crack propagation paths, crack number evolution, and force chain distribution characteristics. The results indicate that polyurethane grouting significantly increases the peak load and peak displacement of the specimens, thereby enhancing the fracture load-bearing capacity and deformation tolerance, with the …

Go to article

Fuel Adulteration Detection Using Open-Ended Coaxial Line And Circular Waveguide Techniques, Abdulrahman Alofi, Ahmed Shamseldin, Sharif Iqbal M. Sheikh, Hussein Attia Oct 2025

Fuel Adulteration Detection Using Open-Ended Coaxial Line And Circular Waveguide Techniques, Abdulrahman Alofi, Ahmed Shamseldin, Sharif Iqbal M. Sheikh, Hussein Attia

Faculty Publications

Fuel adulteration, the practice of blending lower-quality substances like kerosene with gasoline, poses significant challenges for ensuring fuel quality and safety. This study investigates two electromagnetic-based methods for detecting such adulteration: the open-ended coaxial line method and the circular waveguide method. The results reveal that the open-ended coaxial line technique is particularly effective in detecting kerosene contamination, identifying levels as low as 10% by measuring changes in the dielectric constant of the gasoline-kerosene mixture. Operating in the frequency range of 0.25–1.25 GHz, this method captures subtle changes in permittivity. In contrast, the circular waveguide method evaluates contamination by monitoring shifts …

Go to article

Intrinsic Defects (Vacancies And Antisites) In Neutron Irradiated Cdsip2 Crystals, Timothy D. Gustafson, Elizabeth M. Scherrer, Nancy C. Giles, Kevin T. Zawilski, Peter G. Schunemann, Jonathan E. Slagle, Kent L. Averett, Larry E. Halliburton Oct 2025

Intrinsic Defects (Vacancies And Antisites) In Neutron Irradiated Cdsip2 Crystals, Timothy D. Gustafson, Elizabeth M. Scherrer, Nancy C. Giles, Kevin T. Zawilski, Peter G. Schunemann, Jonathan E. Slagle, Kent L. Averett, Larry E. Halliburton

Faculty Publications

Cadmium silicon phosphide (CdSiP2) is a nonlinear optical material widely used in optical parametric oscillators. Intrinsic defects (vacancies and antisites) are responsible for unwanted broad optical absorption bands in these crystals that degrade the performance of the devices. In the present work, optical absorption and electron paramagnetic resonance (EPR) spectra are acquired (at room temperature and 12 K, respectively) from a neutron-irradiated CdSiP2 crystal. After the irradiation, the crystal is highly absorbing from the band edge near 600 nm to beyond 1.3 μm because of overlapping defect-related absorption bands. Heating to 550 °C removes nearly all the …

Go to article

Microstructural Evolution And Magnetic Properties Of Spark Plasma Sintered Smco5 And Smco5-Fe Composites, Farhan Ishrak, Michael Lastovich, Fu-Yun Tsai, Charles Perkins Iv, Henri Baldino, Alex Helmer, Sean Rego, Sanoj Karki, Daniel Hedlund, Rajeev Gupta, Tushar Borkar Oct 2025

Microstructural Evolution And Magnetic Properties Of Spark Plasma Sintered Smco5 And Smco5-Fe Composites, Farhan Ishrak, Michael Lastovich, Fu-Yun Tsai, Charles Perkins Iv, Henri Baldino, Alex Helmer, Sean Rego, Sanoj Karki, Daniel Hedlund, Rajeev Gupta, Tushar Borkar

Mechanical Engineering Faculty Publications

Optimizing SmCo(5-)based nanocomposites for high-temperature magnetic applications requires balancing coercivity and saturation magnetization, properties often compromised by grain coarsening, oxidation, and secondary phase formation during conventional sintering. This study investigates the microstructural evolution and magnetic properties of SmCo5 and SmCo5-Fe composites processed via high-energy ball milling followed by spark plasma sintering at 900 degrees C and 1000 degrees C, a route designed to retain the nanostructure while enabling rapid densification compared to conventional sintering. A suite of characterization techniques, including electron microscopy, X-ray diffraction, magnetometry, Magneto-optical Kerr effect, and magnetic force microscopy, reveals the extent of consolidation, phase composition, and …

Go to article

Enhancing 6g Network Security With Quantum Key Distribution: A Comprehensive Review, Bassma M. Kamil Oct 2025

Enhancing 6g Network Security With Quantum Key Distribution: A Comprehensive Review, Bassma M. Kamil

Al-Esraa University College Journal for Engineering Sciences

With the considerable progress of sixth-generation (6G) networks further on the horizon, security has attracted much attention in the face of increasingly sophisticated threats, especially from quantum computing. Classical cryptographic schemes based on computational hardness are becoming more and more brittle, as they can easily be attacked with a quantum computer. Quantum Key Distribution (QKD) arises as a promising tool for information-theoretic security through quantum mechanics to obtain an unbreakable key by exchanging unknown bit sequences. In this paper, we provide an extensive survey on the integration of QKD both in the envisioned 6G architecture, including current implementations, technical feasibility, …

Go to article

Protection The Nfv Net-Work Using The Random Forest Classification, Mustafa H. Taha, Ibtesam Jomaa Hawi, Wafaa Waheeb Abdullah Ali Oct 2025

Protection The Nfv Net-Work Using The Random Forest Classification, Mustafa H. Taha, Ibtesam Jomaa Hawi, Wafaa Waheeb Abdullah Ali

Al-Esraa University College Journal for Engineering Sciences

A misuse attack is the most common and dangerous type of attack that could target NFV (Network Function Virtualization). In a misuse attack, the attacker attempts to consume the NVF environment’s resources by sending a large amount of traffic. To protect the NFV environment, an early and accurate misuse attack detection system has been proposed based on NFV and Random Forest Classifier. The proposed model starts with importing the dataset and analyzing it then pre-processing and feature selection using a PSO (particle swarm optimization) Test algorithm, classification is based on the most common and efficient machine learning technique, which is …

Go to article

Design Of A Hybrid System For Powering Wireless Communication Units, Samer Rabih, Ahed Alboody Oct 2025

Design Of A Hybrid System For Powering Wireless Communication Units, Samer Rabih, Ahed Alboody

Al-Esraa University College Journal for Engineering Sciences

Wireless and optical communication units are becoming more widespread nowadays, especially in rural areas. Therefore, feeding electricity has become essential for the continuity of services. As a result of economic and social development, there has been an urgent need to supply electrical power for the basic requirements of wired and wireless telecommunications equipment. This is linked to public safety, long life, and connection to uninterruptible power systems to ensure continuous power supply, whether from renewable energy sources or traditional diesel systems. This research studies and designs a renewable energy (solar) power system to power telecommunications equipment. The proposed power system …

Go to article

Dynamic Ris-Enabled Massive Mimo Noma Systems Power Allocation Optimization For 6g Using Machin Learning Approach, Mohamed Hassan, Khalid Hamid, Salah Hagahmoodi, Elmuntaser Hassan Oct 2025

Dynamic Ris-Enabled Massive Mimo Noma Systems Power Allocation Optimization For 6g Using Machin Learning Approach, Mohamed Hassan, Khalid Hamid, Salah Hagahmoodi, Elmuntaser Hassan

Al-Esraa University College Journal for Engineering Sciences

This study examines spectral efficiency (SE) and throughput throughout a spectrum of user densities (from 50 to 1000 users), user mobility speeds (0 to 350 km/h), latency, packet loss, and fairness index, within a wide range of signal-to-noise ratios (SNRs). The analysis includes a number of different situations, such as (i) cooperative non-orthogonal multiple access (NOMA) with massive multiple-input multiple-output (mMIMO), (ii) mMIMO cooperative NOMA integrated with cognitive radio (CR), and (iii) CR-assisted mMIMO cooperative NOMA enhanced with reconfigurable intelligent surfaces (RIS). All of these are part of 6G millimeter-wave (mmWave) networks. The study investigates the enhancement of latency, packet …

Go to article

Harnessing Waste Heat From Solar Cells Using Advanced Energy Storage Systems, Hayder Ibrahim Ismael Oct 2025

Harnessing Waste Heat From Solar Cells Using Advanced Energy Storage Systems, Hayder Ibrahim Ismael

Al-Esraa University College Journal for Engineering Sciences

Renewable energy is largely produced by photovoltaic (PV) solar cells, but such a process is greatly impacted with thermal buildup as the solar cells work. Redundant heat not only lowers the level of electrical production, but also hastens deterioration and decreases the life-time of PV modules. In this study, we suggest a hybrid system which combines high-performance energy storage devices, namely, super-capacitors, and PV modules coupled with the use of waste heat as a source of useful energy and which increases efficiency of the system in conjunction. In order to estimate the potential amount of thermal energy recovery, as well …

Go to article

Empirical Research Of A Greenhouse Monitoring And Controlling System Using Zigbee Protocol, Mohammed Hijazeh, Salah Hagahmoodi Oct 2025

Empirical Research Of A Greenhouse Monitoring And Controlling System Using Zigbee Protocol, Mohammed Hijazeh, Salah Hagahmoodi

Al-Esraa University College Journal for Engineering Sciences

Greenhouses are of great importance in the agricultural field as they provide the appropriate and important environment for the growth and production of various plants regardless of the surrounding environmental conditions. Monitoring and controlling these houses are considered necessary and important in order to provide the required environment and obtain the best production. Therefore, the aim of this project is to study the monitoring and control of these houses using wireless sensor networks, which are considered modern and simple methods due to the accuracy of work and little effort they provide, and thus better production. The study will be for …

Go to article

Designing An Efficient Deduplication Algorithm For Audio Files In Cloud Storage, Ammar Zakzouk, Alaa Al Sebae, Hasan Hasan Oct 2025

Designing An Efficient Deduplication Algorithm For Audio Files In Cloud Storage, Ammar Zakzouk, Alaa Al Sebae, Hasan Hasan

Al-Esraa University College Journal for Engineering Sciences

Data duplication is a significant challenge in large-scale data storage systems, as it consumes storage space and impacts data organization, management, and processing. An optimal storage system effectively utilizes available storage space. To solve this problem, hash algorithms are employed to generate hash keys for files. Matching files have the same hash key. However, the hash key for two different files in the data may match, and this is what we refer to as a collision. The collision issue is related to the length of the hash key. As the length of the hash key increases, the probability of a …

Go to article

The Future Of Al-Driven Cybersecurity For Advanced Iot, Estqlal Hammad Dhahi, Sanaa Hammad Dhahi, Ohood Fadil Alwan Oct 2025

The Future Of Al-Driven Cybersecurity For Advanced Iot, Estqlal Hammad Dhahi, Sanaa Hammad Dhahi, Ohood Fadil Alwan

Al-Esraa University College Journal for Engineering Sciences

Internet of Things technologies experience rapid advancement because of 5G networks and upcoming 6G technologies, which resulted in transformational changes to security dynamics. This study examines the functionality of artificial intelligence through platforms developed to secure Internet of Things systems. The demand for improved security capabilities has become essential because IoT devices generate new assault channels, and their market penetration speed is escalating. Machine learning algorithms, together with deep learning and natural language processing methods, are investigated in this paper for enhancing the security protocols of IoT systems through studies found in academic literature. The paper explores upcoming developments and …

Go to article

Foundations Of Artificial Intelligence In Healthcare Diagnostics: A Systematic Survey, Raghad Tariq Al-Hassani Oct 2025

Foundations Of Artificial Intelligence In Healthcare Diagnostics: A Systematic Survey, Raghad Tariq Al-Hassani

Al-Esraa University College Journal for Engineering Sciences

Artificial Intelligence (AI) is becoming the cornerstone of the future of healthcare diagnostics, that has to ability to change the healthcare diagnostic landscape in terms of diagnostic accuracy, speed, and availability. This systematic review investigates the basic methods, tools, applications, and challenges involved in the integration of AI in diagnostic medicine. It emphasizes the using of machine learning models, deep learning networks (e.g., CNNs), NLP for clinical documentation, and smart computing infrastructures, such as edge device and IoMT. They are making possible real-time, data-driven decision making that is already at human-expert-level performance or, in some cases, even better (in the …

Go to article

Secure Gif Files Based On Zuc Stream Cipher And Present Algorithm, Suhad Fakhri Hussein Oct 2025

Secure Gif Files Based On Zuc Stream Cipher And Present Algorithm, Suhad Fakhri Hussein

Al-Esraa University College Journal for Engineering Sciences

Some important security needs include authentication, confidentiality, integrity, non-repudiation, and user privacy. Many security systems include these required protections for information transmission. The encryption process is one of the most important security measures. Many secure encryption algorithms are based on different keys and key lengths to ensure a high degree of security. GIF file format is common file format that is used in several application, securing these files through transmission is imperative. In this paper, an efficient method for encryption GIF file is proposed based on using modified present algorithm, modified ZUC stream cipher, and an efficient method for key …

Go to article

Advanced Strategies And Solutions Towards More Secure And Effective Two-Factor Authentication In Networking, Zahraa Sameer Jawad Oct 2025

Advanced Strategies And Solutions Towards More Secure And Effective Two-Factor Authentication In Networking, Zahraa Sameer Jawad

Al-Esraa University College Journal for Engineering Sciences

With the rapid increase in cybersecurity threats targeting network systems, traditional two-factor authentication (2FA) methods are insufficient to address advanced attacks. Vulnerabilities such as phishing, SIM-swapping, and social engineering exploit the limitations of SMS-based and email-based 2FA. This paper examines advanced strategies and solutions for securing networked environments through robust 2FA mechanisms, focusing on approaches like elliptic curve cryptography (ECC), digital certificates, and biometric verification. This article offers a comparative review of various strategies about their effectiveness in enhancing security, while also highlighting their capacity to optimize user-friendliness and adaptability to emerging threats. Research findings promote an effective countermeasure strategy …

Go to article

Advancements In Ultrasound Technology And Iot Security: A Physics-Based Approach To Enhanced Imaging With Lightweight Encryption Algorithms, Noor Fawzi Shafiq Oct 2025

Advancements In Ultrasound Technology And Iot Security: A Physics-Based Approach To Enhanced Imaging With Lightweight Encryption Algorithms, Noor Fawzi Shafiq

Al-Esraa University College Journal for Engineering Sciences

The rapid advancements in ultrasound technology, coupled with the growing significance of IoT security, present a unique opportunity to enhance imaging systems while ensuring data integrity. This study explores the integration of physics-based principles in ultrasound imaging, focusing on how lightweight encryption algorithms can secure data transmitted from IoT devices.Ultrasound technology has evolved significantly, benefiting from improved imaging techniques and the incorporation of IoT devices. As these devices proliferate across various applications, including healthcare and industrial monitoring, the need for secure data transmission becomes paramount. This paper proposes a framework that combines advanced ultrasound imaging with robust lightweight encryption methods …

Go to article

Artificial Intelligence Approaches To Mitigating Network Congestion In Iot Systems, Aysar Hadi Oleiwi Oct 2025

Artificial Intelligence Approaches To Mitigating Network Congestion In Iot Systems, Aysar Hadi Oleiwi

Al-Esraa University College Journal for Engineering Sciences

The unprecedented explosion of Internet of Things (IOT) devices has elevated the requirements of the network infrastructures to unprecedented levels, causing severe congestion problems, especially in applications which demand low latency, high throughput, and real-time feedback. Static routing protocols, AQM, and TCP variants are some of the traditional mechanisms for congestion control that are unable to perform efficiently in dynamic and diverse IoT environments as they are reactive-based and inflexible. To this end, in this paper, we explore the promising ability of Artificial Intelligence (AI) methods such as Machine Learning (ML), Deep Learning (DL), Reinforcement Learning (RL), and their combination …

Go to article

Groundwater Quality Analyses For Irrigation Purposes In Salah Al-Din, Iraq: A Review, Noor A. Radhi, Dawood E. Sachit, Abdul-Sahib T. Al-Madhhachi Oct 2025

Groundwater Quality Analyses For Irrigation Purposes In Salah Al-Din, Iraq: A Review, Noor A. Radhi, Dawood E. Sachit, Abdul-Sahib T. Al-Madhhachi

Al-Esraa University College Journal for Engineering Sciences

The focus of this study is the effect of the physical and chemical characteristics of groundwaters on plants and agricultural crops, following the last studies on this matter. The results underscore the necessity for groundwater treatment before its utilization in irrigation for sustainable agricultural farming. It is also possible to identify which crop type can be grown in well-watered land, according to the characteristics of irrigation water and the yield of each crop. The study also introduces some ideas about irrigation water quality parameters such as Electrical conductivity (EC), Total Dissolved Solids (TDS), pH, Chloride (Cl–), Sodium (Na …

Go to article

Examining Iot-Enhanced For Current Developments In Face Image Authentication (Fia) Methods And Their Drawbacks, Marwa Jamal Hadi, Emaan Ouudha Oraby Oct 2025

Examining Iot-Enhanced For Current Developments In Face Image Authentication (Fia) Methods And Their Drawbacks, Marwa Jamal Hadi, Emaan Ouudha Oraby

Al-Esraa University College Journal for Engineering Sciences

The quick development of IoT and facial image manipulation (FIM) algorithms, as well as the growth of their user-friendly applications, highlight the pressing need for manipulation detection methods. These techniques need to demonstrate how face photos have been altered and validate their legitimacy. The scientific community has recently taken notice of the phrase “DeepFakes” and methods for detecting them. Take note of the latest methods for identifying watermark-based face image modification as well. The important thing to remember is that every one of these methods has its own set of drawbacks. This study provides a brief introduction to face image …

Go to article

L.G. Twidwell: A Summary Of Fifty-Six Years Of Research, Larry G. Twidwell Oct 2025

L.G. Twidwell: A Summary Of Fifty-Six Years Of Research, Larry G. Twidwell

Metallurgy

No abstract provided.

Go to article

Co2-Induced Changes In Rheology, Structural Evolution, And Particle Characteristics Of Cement Paste, Seongho Han, Tae Yong Shin, Seung Mo Kim, Jae Hong Kim, Kamal H. Khayat Oct 2025

Co2-Induced Changes In Rheology, Structural Evolution, And Particle Characteristics Of Cement Paste, Seongho Han, Tae Yong Shin, Seung Mo Kim, Jae Hong Kim, Kamal H. Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The injection of carbon dioxide (CO2) into cementitious systems has emerged as a promising approach to enhancing sustainability in concrete production. This study explores the impact of CO2 injection on the rheological behavior, structural build-up, and particle size evolution of cement paste by systematically varying the water-to-cement ratio (w/c) (0.35, 0.4, and 0.5) and CO2 concentration (0.06, 0.28, and 0.84 mol). Rheological analysis revealed a significant increase in initial yield stress with CO2 injection. Using the Modified Bingham model, yield stress increased by 72 % and 150 % for 0.28- and 0.84-mol CO2, …

Go to article

L.G. Twidwell: A Summary Of Fifty-Six Years Of Research, Larry G. Twidwell Oct 2025

L.G. Twidwell: A Summary Of Fifty-Six Years Of Research, Larry G. Twidwell

Metallurgical & Materials Engineering

No abstract provided.

Go to article

Developing A Low-Temperature Pathway For The Synthesis Of Two-Dimensional Ws2 Nanosheets, Akhil Potdar Oct 2025

Developing A Low-Temperature Pathway For The Synthesis Of Two-Dimensional Ws2 Nanosheets, Akhil Potdar

Holster Scholar Projects

Since their discovery in 2004, two-dimensional (2D) materials have attracted great attention due to their unique mechanical, electrical, and chemical properties. However, their integration into devices is limited by the high temperatures required for crystalline growth, which prevents the use of flexible and biocompatible substrates like polymers for biomedical and next-generation electronic devices. This project aims to therefore develop a low-temperature synthesis process for two-dimensional tungsten disulfide (WS₂), a material particularly promising due to its tunable bandgap and biocompatibility. We propose that by first depositing an intermediate tungsten oxide film (WOx) via Hollow Cathode Plasma-Assisted Atomic Layer Deposition (HCP-ALD) and …

Go to article

Extraction Of Aluminum From Lunar Regolith Through Molten Salt Electrolysis, Jacob N. Ortega, Todd P. Sander, Jeffrey D. Smith, Fateme Rezaei, David J. Bayless, William Schonberg, Daniel S. Stutts, Frank D. Han Oct 2025

Extraction Of Aluminum From Lunar Regolith Through Molten Salt Electrolysis, Jacob N. Ortega, Todd P. Sander, Jeffrey D. Smith, Fateme Rezaei, David J. Bayless, William Schonberg, Daniel S. Stutts, Frank D. Han

Materials Science and Engineering Faculty Research & Creative Works

This paper presents the methodology, development, and results of an end-to-end regolith-to-metal concept for producing aluminum in-situ on the lunar surface, namely, the Lunar In-Situ Aluminum Production through Molten Salt Electrolysis (LISAP-MSE) method. Using electrolytic reduction, aluminum oxide (i.e., alumina) can be reduced into aluminum and oxygen via electrolysis in a molten salt bath. A steady supply of hydrogen chloride could allow this in-situ resource utilization (ISRU) method to supply several necessary materials consumed in the electrolytic reduction step of the process to produce bulk aluminum metal, oxygen, water, and silica from anorthite abundant in lunar highland regions. In this …

Go to article

Chemistry Of Inclusions By Size In Three Primary Copper Anodes, Charles Campbell, Michael Moats Oct 2025

Chemistry Of Inclusions By Size In Three Primary Copper Anodes, Charles Campbell, Michael Moats

Materials Science and Engineering Faculty Research & Creative Works

Three copper anodes from different commercial electro refineries were characterized to measure inclusion chemistry, size (diameter), and morphology. An automated scanning electron microscope (SEM) paired with energy-dispersive X-ray spectroscopy (EDS) was used to examine hundreds of inclusions near the mold and set sides of each anode. The investigation revealed that in the two anodes with less impurities (99.65% Cu and 99.75% Cu), many of the inclusions were Cu2O with an average diameter of 2 microns. The greater impurity anode (99.05% Cu, 4076 ppm Pb, 1939 ppm As, 635 ppm Bi) contained significant numbers of complex oxide inclusions, averaging 4.6 microns …

Go to article

Tensile Performance Sensitivity To Variations Of Standard 17-4 Ph Heat Treatments On Lpbf-Produced Material, Ben Brown, Cory Read, Joseph Newkirk, Frank Liou Oct 2025

Tensile Performance Sensitivity To Variations Of Standard 17-4 Ph Heat Treatments On Lpbf-Produced Material, Ben Brown, Cory Read, Joseph Newkirk, Frank Liou

Materials Science and Engineering Faculty Research & Creative Works

Standard heat treatments for metals of a particular composition are typically designed with the assumption of a conventional starting microstructure, such as that produced by casting or wrought processing. When applied to metals fabricated by Laser Powder Bed Fusion (LPBF) metal additive manufacturing (AM), these heat treatments can produce inconsistent performance due to the unique as-built microstructures. This study investigates how modifications to standard heat treatments for 17-4 PH steel influence the microstructure and mechanical properties of LPBF-fabricated material. Specimens were produced and subjected to varying solutionizing and homogenizing treatments followed by standard aging treatments. Microstructures were characterized using optical …

Go to article

Melting Behavior Of Direct Reduced Iron Pellets With Different Carbon Content In Molten Steel And Molten Slag, Fabian Andres Calderon Hurtado, Joseph Govro, Arezoo Emdadi, Ronald J. O'Malley Oct 2025

Melting Behavior Of Direct Reduced Iron Pellets With Different Carbon Content In Molten Steel And Molten Slag, Fabian Andres Calderon Hurtado, Joseph Govro, Arezoo Emdadi, Ronald J. O'Malley

Materials Science and Engineering Faculty Research & Creative Works

This study investigates the melting behavior of direct reduced iron (DRI) pellets in molten slag and steel baths, focusing on how the carbon content influences the melting rate through the stirring effects of gas evolution on heat transfer. A computational model using COMSOL Multiphysics 6.1 is developed to simulate the temperature profile at the pellet's core and the gas evolution resulting from the reaction between FeO and carbon within the pellet. The model is validated using experimental data from this study as well as literature on the DRI pellet–molten slag system. Results indicate that, despite the increased enthalpy demand associated …

Go to article

Selective Nickel Leaching And Preparation Of Battery-Grade Nickel Carbonate From Copper-Rich Industrial Intermediate, Janaka Jayamini Wijenayake, Michael S. Moats, Lloyd Masuzyo Mseteka, Lana Alagha Oct 2025

Selective Nickel Leaching And Preparation Of Battery-Grade Nickel Carbonate From Copper-Rich Industrial Intermediate, Janaka Jayamini Wijenayake, Michael S. Moats, Lloyd Masuzyo Mseteka, Lana Alagha

Materials Science and Engineering Faculty Research & Creative Works

The rising demand for electric vehicles (EVs) has driven a significant increase in nickel consumption, a critical element in EV battery production. An industrially viable hydrometallurgical process was developed for the selective recovery of nickel from a copper-rich industrial intermediate, containing approximately 70 wt.% Cu and 6 wt.% Ni, predominantly as sulfides alongside minor impurities. Approximately 90% of nickel was selectively extracted via single-stage atmospheric pressure leaching using HCl and H2O2 at 95 °C for 12 h, with the majority of copper retained in the leach residue, which can be utilized as a valuable feedstock for copper smelters. The selectivity …

Go to article

Laboratory Investigation Of High-Temperature Preformed Particle Gels For Fluid Control In Granite Cores For Geothermal Applications, K. Caleb Darko, Yanbo Liu, Thomas P. Schuman, Mingzhen Wei, Baojun Bai Oct 2025

Laboratory Investigation Of High-Temperature Preformed Particle Gels For Fluid Control In Granite Cores For Geothermal Applications, K. Caleb Darko, Yanbo Liu, Thomas P. Schuman, Mingzhen Wei, Baojun Bai

Chemistry Faculty Research & Creative Works

To understand the applicability of high-temperature preformed particle gel (HT-PPG) for control of short-circuiting in enhanced geothermal systems (EGSs), core flooding experiments were conducted on fractured granite cores under varying fracture widths, gel particle sizes and swelling ratios. Key parameters such as injection pressure, water breakthrough pressure, and residual resistance factor were measured to evaluate HT-PPG performance. The gel exhibited strong injectability, entering granite fractures at pressure gradients as low as 0.656 MPa/m; HT-PPG yields a superior sealing performance by significantly reducing the permeability; and dehydration occurs during HT-PPG propagation, with a dehydration ratio ranging from 4.71% to 11.36%. This …

Go to article

Additive Manufacturing Of Multi-Material Aircraft Sandwich Structures, Dhriti Mandalam Surendranath Kumar, Cody Van Dyck Oct 2025

Additive Manufacturing Of Multi-Material Aircraft Sandwich Structures, Dhriti Mandalam Surendranath Kumar, Cody Van Dyck

College of Engineering Summer Undergraduate Research Program

This SURP proposal is centered around the exploration of the application of 3D printing composite part processing techniques to produce multi-material sandwich structures for high performance applications such as civilian and military aircraft. These processing techniques have the potential to significantly reduce the costs and the environmental impact of existing conventional autoclave composite processing techniques. The exploration of new ‘out-of-autoclave’ composite part processing techniques may help to reduce processing costs and the environmental impact of processing, as well as broaden the engineering applications of cellular core materials beyond their existing engineering applications. 3D printing directly onto sandwich core materials will …

Go to article

First Prev Next Last