Materials Science and Engineering Commons^™

Investigation Of Light Management Strategies And Photochemistry Of Si/Tio2 Tandem Microwire Slurries For Solar Hydrogen Generation., Saumya Gulati

Electronic Theses and Dissertations

The intermittent nature of the Sun makes it difficult to use it as a primary source of electricity and often needs to be supplemented by electricity from the grid which comes from fossil fuels. This motivates the need for solar energy storage. Photoelectrochemical (PEC) water-splitting has been explored as a means to convert solar energy into hydrogen (and oxygen), which can be stored as fuel. The current method of coupling PV and electrolyzer units has been widely commercialized, however, the cost of H₂ generated is far from the target of $1/kg set by the DOE under the Energy EarthShot …

An In Vivo Biocompatibility Analysis Of A Novel Tissue Regeneration Matrix Using A Pig Model, Shamar Thomas

All Theses

The goal of this project is to develop an injectable bead scaffold to promote tissue regeneration in the void created by lumpectomy and to alleviate post lumpectomy problems by preventing local recurrence and minimizing surgical-related infections. Microbeads were synthesized from collagen type I and crosslinked with tannic acid to form the basis for this injectable therapeutic. Tannic acid acts as a therapeutic anticancer agent. The action mechanisms of tannins in breast cancer cells have been studied with studies showing tannins to be cytotoxic to cancer cells in a dose-dependent manner. Tannic acid induces apoptosis in breast cancer cells via caspase …

Classification Of Electrical Current Used In Electroplastic Forming, Tyler Grimm

All Dissertations

Electrically assisted manufacturing (EAM) is the direct application of an electric current to a workpiece during manufacturing. This advanced manufacturing process has been shown to produce anomalous effects which extend beyond the current state of modeling of thermal influences. These purported non-thermal effects have collectively been termed electroplastic effects (EPEs).

While there is a distinct difference in results between steady-state (ideal DC) testing and pulsed current testing, the very definition of these two EAM methods has not been well established. A "long" pulse may be considered DC current; a "short" pulse may produce electroplastic effects; and even "steady-state" current shapes …

Machine Learning-Based Data And Model Driven Bayesian Uncertanity Quantification Of Inverse Problems For Suspended Non-Structural System, Zhiyuan Qin

All Dissertations

Inverse problems involve extracting the internal structure of a physical system from noisy measurement data. In many fields, the Bayesian inference is used to address the ill-conditioned nature of the inverse problem by incorporating prior information through an initial distribution. In the nonparametric Bayesian framework, surrogate models such as Gaussian Processes or Deep Neural Networks are used as flexible and effective probabilistic modeling tools to overcome the high-dimensional curse and reduce computational costs. In practical systems and computer models, uncertainties can be addressed through parameter calibration, sensitivity analysis, and uncertainty quantification, leading to improved reliability and robustness of decision and …

Identifying The Optimal Range Of Fine Ground Waste Glass As Cement Replacement, Stephanie Taylor

Undergraduate Research Symposium Posters

The viability of finely ground waste glass as cement replacement is linked to the amount of time the concrete is allowed to cure. Testing beyond 91 days was rare, with only one study using an entire year. Replacement levels below 25% provided the best results in compressive strength. The parameters for future testing derived from this literature review will use ASTM C39/C39M-21 to test the compressive strength of specimens with 0%, 10%, 15%, 20% and 25% finely ground glass replacing OPC with measurements taken at 1, 7, 28, 56, 90, 182 and 365 days of curing.

Development Of A Biobased Carbon Adsorbent For Treating Emerging Contaminants In Recycled Water On The International Space Station, Savanna Vacek, Madeline Carroll, Gabson Baguma

Undergraduate Research Symposium Posters

The International Space Station (ISS) operates as a closed system. Water is recycled from humidity and urine and held in a wastewater tank; part of the Water Processing Assembly (WPA). Potable treated water is used indirectly in the Sabatier Reactor.The Sabatier Reactor is a key component in the Environmental Control and Life Support System (ECLSS). Three main functions of ECLSS: water recovery, air revitalization, and oxygen generation Sabatier Reactor recently failed due to contamination of DMSO2, dimethyl sulfone, and DMSD, dimethylsilanediol. DMSO2 and DMSD are emerging contaminants that are not removed by the media used in the WPA due to …

Cobalt/Carbon Composites As Sulfur Hosts For High-Performance Lithium-Sulfur Batteries, Yun-Rui Yang, Huan-Huan Dong, Zhi-Qiang Hao, Xiang-Xi He, Zhuo Yang, Lin Li, Shu-Lei Chou

Journal of Electrochemistry

Lithium-sulfur (Li-S) battery is one of the promising energy storage devices because of its high energy density. However, the sulfur cathode suffers from sluggish electrochemical reaction kinetics, slow charge transfer, large volume expansion and severe shuttle effect of lithium polysulfides inevitably resulting in low reversible capacity, poor rate performance and short cycle life, limiting its practical applications. Herein, the recent progress of cobalt/carbon composites, including cobalt nanoparticles and cobalt single atoms, as the sulfur host materials in Li-S batteries is overviewed. In general, cobalt plays the role of electrocatalyst, which inhibits the shuttle effect of lithium polysulfides, accelerates the electrochemical …

Recent Advances Of Functional Electrolyte Additives For Lithium-Sulfur Batteries, Xiu-Qing Zhang, Shuai Tang, Yong-Zhu Fu

Journal of Electrochemistry

Lithium-sulfur (Li-S) batteries have become one of the most promising next-generation battery systems due to their high energy density and low cost. However, the application of Li-S batteries still faces critical challenges, such as the low conductivities of S and Li₂S, shuttle effect of polysulfides and dendrite growth of Li, etc. The optimization of the electrolyte can ameliorate the electrolyte|electrode interphase, conveniently regulating the parasitic reaction and improving the performance of the resultant batteries. The functional additives in electrolytes provide chances to tune the interphase and even the redox mechanism to improve the performance of the batteries. In …

Ultraviolet-Initiated In-Situ Cross-Linking Of Multifunctional Binder Backbones Enables Robust Lithium-Sulfur Batteries, Sha Li, Xiao Zhan, Gu-Lian Wang, Hui-Qun Wang, Wei-Ming Xiong, Li Zhang

Journal of Electrochemistry

Lithium-sulfur (Li-S) batteries show attractive prospects owing to their high theoretical energy density, but their commercialization still faces such challenges as lithium polysulfides shuttling, severe volume change and considerable polarization. These stubborn issues place higher demands on each component in the battery, such as the development of multifunctional binders with superior mechanical properties. Herein, ethoxylated trimethylolpropane triacrylate was firstly introduced into sulfur cathodes, and in-situ cross-linked by ultraviolet (UV) curing combined with traditional polyvinylidene difluoride binder (i.e., forming a binary binder, denoted as c-ETPTA/PVDF) to construct high-loading and durable Li-S batteries. The covalently cross-linked ETPTA framework not only significantly enhances …

Preface To The Special Issue On Lithium-Sulfur Batteries, Jia-Jia Chen, Ren-Jie Chen, Zhong Jin

Journal of Electrochemistry

No abstract provided.

Metals And Alloys As Catalytic Hosts Of Sulfur Cathode For Lithium-Sulfur Batteries, Zhen-Yu Wang, Xue-Ping Gao

Journal of Electrochemistry

Lithium-sulfur batteries are recognized as one of the most promising next-generation energy storage devices, owing to the high theoretical energy density of 2600 Wh·kg^–1. However, their application has been seriously hindered by the sluggish electrochemical reaction kinetics of elemental sulfur and discharged products (Li₂S₂/Li₂S), and the notorious “shuttle effect” of soluble intermediate lithium polysulfide species, leading to poor cycle stability, low sulfur utilization and inferior coulombic efficiency. Introducing catalytic hosts into sulfur cathode is an efficient path to propel the conversion of sulfur-contained species, thus preventing the dissolution and loss of active-sulfur …

Poly(Ether Imide)S: Synthesis And Properties, Rachel Price

Honors College Theses

The synthesis of strong polymers is crucial to the creation of heat-resistant, durable, and mechanically useful plastics that we use every day. Poly(ether imide)s are used in applications such as food service, aerospace, automotive, and many more. This thesis will discuss the synthesis and properties of these plastics to help express a larger understanding of these polymers.

Optical Fiber Tip Micro Anemometer, Jeremiah C. Williams, Hengky Chandrahalim

AFIT Patents

A passive microscopic flow sensor includes a three-dimensional microscopic optical structure formed on a cleaved tip of an optical fiber. The three-dimensional microscopic optical structure includes a post attached off-center to and extending longitudinally from the cleaved tip of the optical fiber. A rotor of the three-dimensional microscopic optical structure is received for rotation on the post. The rotor has more than one blade. Each blade has a reflective undersurface that reflects a light signal back through the optical fiber when center aligned with the optical fiber, the blades of the rotor shaped to rotate at a rate related to …

High Tg, Bio-Based Isosorbide Methacrylate Resin Systems For Vat Photopolymerization, Xi Chu, Jianwei Tu, Heather Berensmann, John J. La Scala, Giuseppe R Palmese

Henry M. Rowan College of Engineering Departmental Research

The use of isosorbide-derived polymers has garnered significant attention in recent decades as a high-performance, renewable material sourced from biomass. Of particular interest is isosorbide methacrylate, which possesses low viscosity (< 500 >cps), high thermal properties (Tg ≈ 220 °C), and high modulus (>4 GPa). These characteristics present a promising opportunity to replace BPA-derived methacrylate compounds in various applications. This investigation aims to synthesize and characterize isosorbide-based low-viscosity resin systems for 3D printing. The resin blends are composed of isosorbide methacrylate and two bio-renewable methacrylates, furfuryl methacrylate (FM) and bis-hydroxymethyl-furan methacrylate (BHMF-M), polymerized through a digital light processing (DLP) technique. …

Shape Memory Polymer-Based Multifunctional Syntactic Foams, Siavash Sarrafan

LSU Doctoral Dissertations

With the increase in popularity of shape memory polymers (SMPs), especially in applications such as aerospace, textile, biomedical engineering, and even structures, the weight of the material and the devices made with it has always been a crucial factor. Using the shape memory polymer as a matrix to make a syntactic foam is one of the best and most affordable approaches to creating a lighter material that still has the shape memory effect. The addition of particles of different stiffness, strength, and size, with variable fractions, creates a composite that enables engineering the mechanical, as well as other physical and …

Lunar In-Situ Aluminum Production Through Molten Salt Electrolysis (Lisap-Mse), Jacob Ortega, Jeffrey D. Smith, Fateme Rezaei, David Bayless, William P. Schonberg, Daniel S. Stutts, Daoru Frank Han

NASA-Missouri Space Grant Consortium

The goal of Artemis is to establish a sustained presence on the Moon. To achieve so, numerous resources are necessary. The Moon contains several essential elements needed to sustain human presence. Most of those elements are trapped in the form of minerals. To refine those minerals into useful materials, reduction methods are needed. Most reduction methods on Earth require large amounts of mass and power which is unrealistic for early stages of building a lunar base. To solve this problem, we are developing a concept of Lunar In-Situ Aluminum Production through Molten Salt Electrolysis (LISAP-MSE).

The LISAP-MSE project, if successful, …

A Guide To Fifty Years Of Research At Montana Tech: Part 2 The Treatment Of Electroplating And Electromachining Metal Hydroxide Sludge For The Recovery Of Metal Values [See Also Part 1), Larry G. Twidwell

Metallurgy

ABSTRACT and FORWARD

The treatment and recovery of metal species from hydrometallurgical solutions and wastewater solids has been and continues to be an important research topic. This presentation includes a guide to the literature with a summary discussion of the research conducted at Montana Tech in the Department of Metallurgical and Materials Engineering during the 1984-2001 period. A previous presentation (Part 1) focused on the removal of arsenic, selenium, and other species by hydrometallurgical processes and the formation of environmentally stable disposable products. This guide is available at the reference presented above.

This following presentation (Part 2) is based on …

A Guide To Fifty Years Of Research At Montana Tech: Part 1-The Treatment Of Arsenic, Selenium, Thallium, Metal Bearing Solutions And Waste Solids, Larry G. Twidwell

Metallurgy

ABSTRACT and FORWARD

The removal of arsenic, selenium, and metal species from hydrometallurgical solutions and wastewaters has been and continues to be an important research topic. This presentation includes a discussion of the research conducted at Montana Tech in the Department of Metallurgical and Materials Engineering during the past fifty years. The discussion is focused on removal of arsenic by co-precipitation with Fe(III) and Fe(II), co-precipitation with Fe(III) and Al(III), reduction using elemental iron; the removal of selenium by elemental iron and catalysed iron; and the removal of cadmium, copper, nickel, zinc by co-precipitation with Fe(III) and Al(III).

This presentation …

The Influence Of Diamine Curing Additives On The Network Architecture Of Phthalonitrile Thermosetting Polymers, Tyler J. Richardson

Dissertations

Phthalonitrile monomers undergo diamine-promoted polymerization by a complex reaction mechanism involving two competitive cure pathways, forming two primary network architectures: linear polyisoindoline chains and branched triazine crosslinks. The influence of the diamine curing additive on the polymerization pathway, and the influence of the resulting network architectures on cured network properties, have not been adequately explored within the phthalonitrile field. Two structurally different diamine curing additives, bis[4-(3-aminophenoxy)phenyl] sulfone (mBAPS) and 1,3-phenylenebis((4-(4-aminophenoxy)phenyl)methanone) (AEK-134), were studied for the polymerization of resorcinol phenylphosphate phthalonitrile (RPPhPN), where the influence of diamine structure and concentration on the polymerization behavior, network architecture, and bulk thermal and thermomechanical …

Effects Of Tempering Temperature On Gas Turbine Fan Cases, Seth Utter

Honors Scholar Theses

The project aimed to investigate the effects of tempering temperature on metals used for gas turbine engine fan cases as a major relevant concern is containing blades in during blade-out events. There are three ways to accomplish this: using a thicker metal, incorporating different materials into the case, or heat treating the metal. This project focused on the third solution: reviewing the impact toughness and hardness of fractured samples and their equivalent ductile-to-brittle transition shear faces. Given its availability, 1045 steel, as opposed to aerospace grade metals, was used for in-house testing. The data obtained from these experiments were then …

Microstructure Characterization Of Az31 Under Strain, Aaron Beckley

Liberty University Research Week

Undergraduate

Three Minute Thesis

Welding 3d Printed Structures For Composite Sacrificial Tooling, Dominic L. Perez, Kyle Gerold, Matt K. Ficker, Matthew D. Wooden, Aidan M. Dungy, Brennan G. Coit

Research & Creative Achievement Day

3D printed parts offer the ability to generate dimensioned, complex objects with minimal machining touch time and skill, but they are typically very weak and limited in size. Strong and light composite parts require tooling to be created for the fabric to lay on while the resin is curing, but tooling can be quite expensive during the prototyping phase or for low part quantity runs. This study examined the techniques required to weld smaller 3D printed parts together to form large 3D printed tools that could be used as a sacrificial tool for a composite part. In this method, the …

Carbon Cornhole, Justin O. Dailey, Blake M. Endle, Joshua J. Lebrun, Bailey J. Banaszynski, Josiah M. Gleisner

Research & Creative Achievement Day

The purpose of this design project is to create a durable lightweight yard game for players of all skill levels. Carbon Cornhole is a composite improvement on the already popular yard game, cornhole, with a new twist. The final product is based on valued feedback from customers. The board is manufactured of carbon fiber/epoxy sandwich panels with a closed cell foam core. The composite design provides a lightweight product. The panels are specifically manufactured to retain their mechanical properties when exposed to outdoor elements such as water and UV radiation. The addition of inlayed LED lights and two new "skill …

Flexural Creep Comparison To Tts Creep For Pp And Pp-Gf30, Max R. Kauphusman, Regan G. Harvey

Research & Creative Achievement Day

Creep testing is one of the most expensive datasets to acquire in both cost ($10k+) and time (2+ months). Dynamic Mechanical Analysis offers a unique opportunity to characterize creep properties of polymers using a technique called Time Temperature Super Positioning (TTSP) in a relatively short period of time. TTSP works by holding either frequency or loading constant at set temperatures for a constant period of time. WLF equations are then used to combine multiple curves from different temperatures into a master curve that can be used to extrapolate out creep performance at designated reference temperatures and save a considerable amount …

Carbon Fibers Recycling From Degraded Prepregs And Mechanical Properties Or Recycled Composite, Monjur Morshed Rabby, Minhazur Rahman, Partha Pratim Das, Vamsee Vadlamudi, Rassel Raihan

Institute of Predictive Performance Methodologies (IPPM-UTARI)-Archive

The size of the global composites market is anticipated to grow more than previously. Due to the rapidly rising volume of CFRP production, the waste from this material poses numerous problems and has significantly increased the socio-technological pressure to find sustainable composite recycling solutions. The problem is that recycling the composite part is challenging once its service life has expired. The same problem is true for the raw materials (prepregs) used in composite manufacturing. When the prepreg out-life/shelf-life is over, prepregs are abandoned, resulting in a loss of millions of dollars and an adverse environmental effect. In this study, the …

The Impact Of Solution Ionic Strength, Hardness, And Ph On The Sorption Efficiency Of Polychlorinated Biphenyls In Magnetic Nanocomposite Microparticle (Mnm) Gels, Angela M. Gutierrez, Thomas D. Dziubla, J. Zach Hilt

Chemical and Materials Engineering Faculty Publications

Environmental conditions of groundwater and surface water greatly vary as a function of location. Factors such as ionic strength, water hardness, and solution pH can change the physical and chemical properties of the nanocomposites used in remediation and the pollutants of interest. In this work, magnetic nanocomposite microparticle (MNM) gels are used as sorbents for remediation of PCB 126 as model organic contaminant. Three MNM systems are used: curcumin multiacrylate MNMs (CMA MNMs), quercetin multiacrylate MNMs (QMA MNMs), and polyethylene glycol-400-dimethacrylate MNMs (PEG MNMs). The effect of ionic strength, water hardness, and pH were studied on the sorption efficiency of …

Mechanical Characterization Of Additively Manufactured Alloys Compared To Their Wrought Counterparts, Laith A. Alqawasmi

Mechanical Engineering ETDs

Additive manufacturing is a method of manufacturing based on building parts layer by layer, allowing for more control over shape of the product, therefore reducing machining costs, reducing material waste, faster production times and the ability to build complex engineering design that other manufacturing technologies won’t be able to produce. This research is on the tensile and indentation testing (following ASME standards) of 3D printed Ti-6Al-4V and Inconel 718 built by powder-based direct energy deposition technology. Ti-6Al-4V is an attractive material for the aerospace and aviation industry, and Inconel 718, a nickel-chromium based superalloy, is an attractive material for usage …

Modifying Barium Hexaferrite Magnets By Adding Sol-Gel Synthesized Cobalt Ferrite Phase, Thanida Charoensuk, Wannisa Thongsamrit, Anuchit Hunyek, Komkrich Chokprasombat, Pongsakorn Jantaratana, Chitnarong Sirisathitkul

Karbala International Journal of Modern Science

Combining various types of ferrites brings about magnetic properties desirable for different applications. This study aims to modify barium hexaferrite (BaFe₁₂O₁₉) by physically mixing it with cobalt ferrite (CoFe₂O₄). BaFe₁₂O₁₉/CoFe₂O₄ magnets were produced by ball-milling and pressing sol-gel-derived ferrite powders. The ferrite composites showed variations in magnetic properties from BaFe₁₂O₁₉ magnets with a saturation magnetization of 69.46 emu/g and a maximum energy product of 0.4529 MGOe. For the BaFe₁₂O₁₉:CoFe₂O₄ weight ratio of 4:1, both satura-tion …

Femtotesla Magnetometry And Nanoscale Imaging With Color Centers In Diamond, Yaser Silani

Optical Science and Engineering ETDs

Intriguing photophysical properties of color centers in diamond make them ideal candidates for many applications from imaging and sensing to quantum networking. In the first part of this work, we have studied the silicon vacancy (SiV) centers in diamond for nanoscale imaging applications. We showed that these centers are promising fluorophores for Stimulated Emission Depletion (STED) microscopy, owing to their photostable, near-infrared emission and favorable photophysical properties. In the second part, we built a femtotesla Radio-Frequency (RF) magnetometer based on the diamond nitrogen vacancy (NV) centers and magnetic flux concentrators. We used this sensor to remotely detect Nuclear Quadrupole Resonance …

A High-Strength Precipitation Hardened Cobalt-Free High-Entropy Alloy, Matthew Luebbe, Jiaqi Duan, Fan Zhang, Jonathan Poplawsky, Hans Pommeranke, Maalavan Arivu, Andrew Hoffman, Mario F. Buchely, Haiming Wen

Materials Science and Engineering Faculty Research & Creative Works

Recent Studies on Precipitation-Hardened High-Entropy Alloys (HEAs) Demonstrate their High Strength and Thermal Stability, Making Them Promising Materials for High-Temperature Structural Applications Such as Nuclear Reactors. However, Many Existing HEAs Contain Cobalt (Co), Which is Unsuitable for Nuclear Applications Because of the Long-Term Activation Issue of Co. Co is Also Expensive and Considered a Critical Material for Other Applications. Therefore, It is Desired to Exclude Co from the Composition. a Co-Free (Fe_0.3Ni_0.3Mn_0.3Cr_0.1)88Ti₄Al₈ HEA Was Developed and Studied in This Work. in Contrast to Previous Co-Free HEAs, This Alloy is …