Materials Science and Engineering Commons^™

The Effect Of Fine Recycled Concrete Aggregates On The Mechanical And Durability Properties Of Concrete, Abbas Chour, Jamal Khatib

BAU Journal - Science and Technology

The fast increase of construction and demolition (C&D) operations has resulted in the creation of massive amounts of garbage, which must be cleared. Reusing C&D waste is of significant importance for environmental conservation and resource utilization. One such alternative for structural concrete is recycled concrete aggregate obtained from building and demolition debris. In this context, the present study aims to comprehensively review the current state of the art in fine recycled concrete materials (fRCA), including their physical properties, technological advantages, mechanical properties, and durability characteristics. The study establishes a paradigm for evaluating the quality of fRCA, whether created in a …

Advancing Polymer Sustainability Through Custom Interpenetrating Polymer Network Synthesis, Processing, And Design, Alexandra Maria Lehman-Chong

Theses and Dissertations

The need for improving polymer sustainability is as ubiquitous as the role of polymers in modern society. Interpenetrating polymer network (IPN) design flexibility offers opportunities for improved polymer sustainability while balancing desired polymer properties for various applications. This work investigates the structure-property-processing relationships of IPNs judiciously designed under the framework of the polymer life cycle. Sustainable polymer design was largely considered at the feedstock and manufacturing stages while considering overall polymer performance. Chemicals from bio-based feedstocks were used to design a full simultaneous polybenzoxazine-epoxy IPN, focusing on the effects of monomer and polymer structure on polymer properties. Processing-property relationships were …

Reducing Food Scarcity: The Benefits Of Urban Farming, S.A. Claudell, Emilio Mejia

Journal of Nonprofit Innovation

Urban farming can enhance the lives of communities and help reduce food scarcity. This paper presents a conceptual prototype of an efficient urban farming community that can be scaled for a single apartment building or an entire community across all global geoeconomics regions, including densely populated cities and rural, developing towns and communities. When deployed in coordination with smart crop choices, local farm support, and efficient transportation then the result isn’t just sustainability, but also increasing fresh produce accessibility, optimizing nutritional value, eliminating the use of ‘forever chemicals’, reducing transportation costs, and fostering global environmental benefits.

Imagine Doris, who is …

Application Of Quantum Algorithms In The Synthesis Of Dynamic Objects, Noilakhon Yakubova

Chemical Technology, Control and Management

Around the world, the food industry is focusing on achieving energy and resource efficiency. One of the main challenges in the field of process automation is the creation of effective control systems using intelligent technologies to improve the quality of processes and achieve the production of high-quality products with less energy and resources. Therefore, it is necessary to work with a large amount of data. Particular attention is paid to the development of computational algorithms for automated high-speed computational analysis systems for processing this data at high speed. Therefore, the article discusses the use of quantum computing methods in controlling …

Fabrication & Characterization Of Hybrid Piezoelectric/Triboelectric Nanocomposite Nanogenerators Via Fusion Deposition Modeling, Khaled El Toukhy

Theses and Dissertations

This thesis aims to discuss the potential of using piezoelectric and triboelectric nanogenerators (PTENGs) for energy harvesting, particularly in the sportswear industry. PTENG's main advantage is that it offers good flexibility making it suitable for high-strain applications. The piezoelectric effect is induced by embedding piezoelectric nanofillers into one of the two triboelectric layers. PTENGs can generate both piezoelectric and triboelectric signals when strained resulting in an enhanced output compared to regular piezoelectric nanogenerators (PENGs) and triboelectric nanogenerators (TENGs). TPU was adopted as the matrix for PTENGs advantageous due to their flexibility, low electrical resistivity, and compatibility with additive manufacturing techniques. …

Ai-Enabled Assessment Of Roadway Integrity: Forecasting Bitumen Deformation And Road Stability Throughout The Lifecycle Under Traffic Impact, Sabahudin Vrtagic, Milan Dordevic, Fatih Dogan, Muhammed Codur, Mario Hoxha, Edis Softic

Materials Science and Engineering Faculty Research & Creative Works

Asphalt-paved Road junctions frequently encounter deformation and degradation challenges due to heavy vehicular traffic and varying climatic conditions, such as temperature fluctuations and precipitation. This study employs a multifaceted approach, incorporating a Multilayer Perceptron (MLP) model, ancillary machine learning techniques, and optimization methodologies, to address these challenges effectively. The primary objectives are the prediction and analysis of pavement deformation, the optimization of maintenance strategies, and the evaluation of road effectiveness. Our findings underscore the substantial contribution of heavy vehicles to road erosion and the profound impact of vehicular retention and braking at intersections. A Multilayer Perceptron (MLP) model is utilized …

Electrochemical Performance Of Porous Ceramic Supported Tubular Solid Oxide Electrolysis Cell, Heng-Ji Wang, Wen-Guo Chen, Zhou-Yi Quan, Kai Zhao, Yi-Fei Sun, Min Chen, Ogenko Volodymyr

Journal of Electrochemistry

Solid oxide electrolysis cell (SOEC) is an efficient and clean energy conversion technology that can utilize electricity obtained from renewable resources, such as solar, wind, and geothermal energy to electrolyze water and produce hydrogen. The conversion of abundant intermittent energy to hydrogen energy would facilitate the efficient utilization of energy resources. SOEC is an all-ceramic electrochemical cell that operates in the intermediate to high temperature range of 500–750 ℃. Compared with traditional low temperature electrolysis technology (e.g., alkaline or proton exchange membrane cells operating at ~100 ℃), the high-temperature SOEC can increase the electrolysis efficiency from 80% to ~100%, providing …

Nitrogen-Doped Graphite Felt On The Performance Of Aqueous Quinone-Based Redox Flow Batteries, Heng Zhang, Li-Xing Xia, Shan Jiang, Fu-Zhi Wang, Zhan-Ao Tan

Journal of Electrochemistry

Modification of electrode is vitally important for achieving high energy efficiency in aqueous quinone-based redox flow batteries (AQRFBs). The modification of graphite felt (GF) was carried out by means of urea hydrothermal reaction, and simultaneously, the effects of hydrothermal reaction time on the functional groups and surface structure of nitrogen-doped graphite felt were studied. The surface morphology and defect, element content and surface chemical state of the modified electrode were characterized by scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET) test, Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). The electrochemical performance of the modified electrodes was evaluated by cyclic voltammetry, electrochemical impedance …

An In-Situ Raman Spectroscopic Study On The Interfacial Process Of Carbonate-Based Electrolyte On Nanostructured Silver Electrode, Yu Gu, Yuan-Fei Hu, Wei-Wei Wang, En-Ming You, Shuai Tang, Jian-Jia Su, Jun Yi, Jia-Wei Yan, Zhong-Qun Tian, Bing-Wei Mao

Journal of Electrochemistry

The solid-electrolyte interphase (SEI) plays a key role in anodes for rechargeable lithium-based battery technologies. However, a thorough understanding in the mechanisms of SEI formation and evolution remains a major challenge, hindering the rapid development and wide applications of Li-based batteries. Here, we devise a borrowing surface-enhanced Raman scattering (SERS) activity strategy by utilizing a size optimized Ag nanosubstrate to in-situ monitor the formation and evolution of SEI, as well as its structure and chemistry in an ethylene carbonate-based electrolyte. To ensure a reliable in-situ SERS investigation, we designed a strict air-tight Raman cell with a three-electrode configuration. Based on …

Isolation And Characterization Of Caffeine-Degrading Bacteria From Coffee Plantation Areas In Malaysia, Elvina Clarie Dullah, Mohd Fazli Farida Asras

Makara Journal of Technology

Decaffeination by microbial degradation is currently the most optimal and low-cost approach, involving only microbial cells and/or their enzymes. The bacterium was characterized using a series of biochemical tests. Positive results were obtained from carbohydrate fermentation, citrate utilization, and catalase tests, while negative results were obtained from Voges-Proskauer (VP) and indole tests. Three different caffeine concentrations of 0.25%, 0.4%, and 2% were tested and measured through Gas Chromatography-Mass Spectrophotometry (GC-MS) analysis. The highest caffeine reduction (89.25%) was found when 0.25% caffeine was used in the media. Only a small amount of caffeine was reduced to 0.4% and 2%, with 34.78% …

Combined Risk Based Inspection And Fault Tree Analysis For Repetitive 3-Phase Line Piping Leakage At West Java Offshore Topside Facility, Dona Yuliati, Akhmad Herman Yuwono, D. Rizal Asral, Donanta Dhaneswara

Journal of Materials Exploration and Findings

Hydrocarbon releases might result in serious consequences in various aspects. In addition to the contribution to environmental pollution, repetitive leakages need high repair costs. This study aim is to minimize potential repetitive leakage for other typical 3-phase piping systems. We conducted the risk assessment by adopting Risk Based Inspection (RBI) API 581 to identify risk level, calculating piping lifetime, recommended inspection plan and mitigations. The most relevant root causes can be obtained through quantitative Fault Tree Analysis (FTA). Observation and investigation was taken from eight 3-phase piping systems that experienced repetitive leakages. It has been found that the risk level …

The Effect Of Parameters In Cryogenic Treatment On Mechanical Properties Of Tool Steel: A Review, Ronaldus Caesariano Ekaputra, Myrna Ariati Mochtar

Journal of Materials Exploration and Findings

Tool steel is classified as special alloy steel which proposed as dies or mold materials as their high mechanical properties and dimensional stability. In order to improve tool steel’s mechanical properties, heat treatment process, especially, cryogenic treatment is conducted. Cryogenic treatment is done by exposing tool steel material at sub-zero liquid/gas media after heated at austenite temperature. This process significantly affects the martensite phase transformation increase and avoids retained austenite emersion. In particular, the higher martensite volume fraction, the higher hardness and wear resistance value of tool steel. It had been proven that adjusting critical process parameters of cryogenic treatment …

Characteristics Of Sodium Lithium Titanate Synthesized At Different Solid-State Reaction Temperature For Lithium-Ion Battery Anode, Ilham Nur Dimas Yahya, Nofrijon Sofyan, Deni Shidqi Khaerudini, Gerald Ensang Timuda, Slamet Priyono

Journal of Materials Exploration and Findings

The effect of sintering temperature on the characteristics of sodium lithium titanate (NaLiTi₃O₇/NaLTO) synthesized at different solid-state reaction temperature and its performance as lithium-ion battery anode has been investigated. The precursors for the synthesis consisted of LiOH.H₂O, TiO₂, and NaHCO₃. The synthesis was performed via solid-state reaction method. The precursors were mixed and sintered at variation temperatures of 900^oC, 1000^oC, and 1100^oC for 2 hours under atmosphere condition. The final product was characterized using X-ray diffraction (XRD) and particle size analyzer (PSA). The XRD …

Nitrogen Gas Quenching Pressure Effect On Bs S155 Alloy Steel In Vacuum Furnace, Agus Mulyadi Hasanudin, Eddy Sumarno Siradj

Journal of Materials Exploration and Findings

The production of metal and alloy products requires the use of heat treatment, when during the heat treatment process, quenching is a crucial step. The quenching medium can be anything from water, a salt bath, oil, air and gas. In a vacuum furnace, pressurized gas, most frequently nitrogen (N₂) gas, serves as one of the quenching mediums. One of the drawbacks of the quenching process is the distortion and dimensional change of the parts. This paper aims to investigate the influence of nitrogen gas quenching pressure on the distortion and dimensional change of aerospace actuator gear planet parts …

Pipeline Risk Analysis Optimization With Monte Carlo Method Using Gamma Distribution, Farhan Rama Digita, Jaka Fajar Fatriansyah, Abdul Rahim Ridzuan, Hanna Ovelia, Imam Abdillah Mas'ud, Irma Hartia Tihara, Baiq Diffa Pakarti Linuwih

Journal of Materials Exploration and Findings

The inspection process of piping components in the oil and gas industry is one of the most crucial things, given the high risk posed by pipeline system failures, which have a huge impact on losses, both from environmental and financial aspects. Risk-based inspection with the Monte Carlo method is one of the efforts that can be made to minimize failures in piping systems, by involving data distribution to calculate the probability of component failure. Although the normal distribution is commonly used for generating random variables, its use in corrosion rate calculation can lead to overestimation due to negative corrosion rate …

Optimization Of The Building Envelope And Roof Shading To Reduce The Energy Consumption Of College Low-Rise Buildings In Indonesia, Nasruddin Nasruddin, Azimil Gani Alam, Mohammad Imroz Sohel

Makara Journal of Technology

Energy consumption in buildings is a crucial concern globally, prompting researchers to explore innovative solutions to mitigate its impact. This study investigates the optimization of building envelopes and roof shading systems of existing buildings in Indonesia to realize notable energy savings. Multiple scenarios were explored, with modifications to building envelopes and roof shading, highlighting the overall thermal transfer value as a key parameter. Using EnergyPlus simulations, the efficacy of natural ventilation in corridors and roof shading modifications was assessed in reducing energy consumption. The findings revealed that renovating existing buildings by optimization of the building envelope and roof shading by …

The Influence Of Boron (B), Tin (Sn), Copper (Cu), And Manganese (Mn) On The Microstructure Of Spheroidal Graphite Irons, A. V. Bugten, P. Sanders, C. Hartung, R. Logan, M. Di Sabatino, L. Michels

Michigan Tech Publications

Most spheroidal graphite irons (SGIs) have a matrix consisting of ferrite, pearlite, or a mix of the two. To achieve the desired matrix composition, pearlite promoters such as Mn, Cu, or Sn, are added to the molten metal. Among these elements, Sn is the most potent pearlite promoter. However, each has a different impact on the solidification, graphite precipitation, eutectoid transformation, and ultimately the final structure of the material. Research has shown that B promotes ferrite in fully pearlitic grades where Cu and Mn were used to promote pearlite. The present work investigates the effect of B in SGI with …

The Role Of Interactive Spaces In Enhancing Social Interaction Of Children In Orphanage Institutions, Zainab Khalid Rashad Al Khafaji, Shamael M. W. Al Dabbagh

Al-Esraa University College Journal for Engineering Sciences

The child who moves to an environment outside his family environment, suchas orphanage institutions because of the loss of one or all of his family members, itis obvious that he feels a kind of alienation and isolation from his peers and a loss ofa sense of interaction and communication with society, so it is possible to mitigatethis feeling by promoting diversity in interactive activities within the internal spacesof the orphanage institutions and at the neighborhood level, the research problemwas represented by "the lack of clarity in the nature of knowledge aboutthe role of of interactive spaces in enhancing social interaction …

Environmental Footmark And Its Effects On The Sustainability Of Towns, Ali Abdul Samea Hameed

Al-Esraa University College Journal for Engineering Sciences

The Ecological Footmark (EF) is one of the utmost recent and important criteria for assessing the capacity of the population to uphold a life sustainable way. It tests the extent which the indicators have an influence on the natural resources (NR) of the ecosystem such as forestry, water bodies, agricultural lands, pastures, CO2, and properties for construction purposes. This footmark was utilized to evaluate the use of NR to the capacity of the land for regeneration. This research paper discusses the theoretical conceptual component of the EF framework and plans regarding issues related to the environment. The environmental image (EI) …

The Effects Of Urban Fragmentation / Analysis Of The Causes And Challenges In The City Structure, Seemon Matte Abbo, Inaam Amin Albazzaz

Al-Esraa University College Journal for Engineering Sciences

Fragmentation is a fundamental term in the history of critical urban thought,yet the product of fragmentation is manifested in fragments. Urban fragmentationis used to describe the phenomenon that occurs when the urban environment isbroken up into smaller units or dispersed areas. This means that cities becomefragmented rather than cohesive and integrated. This disintegration can be the resultof various factors such as poor planning, lack of infrastructure, different land uses,and social dispersion. This research addresses the problem of urban fragmentationas one of the challenges facing the urban structure of cities, and clarifies the mostimportant factors affecting the city structure during the …

A Review: Special Types Of Concrete Used In Structures, Reem Hatem Ahmed, Mohammed Mosleh Salman

Al-Esraa University College Journal for Engineering Sciences

The term “special” possesses inherent significance and is utilized in this context to denote the distinctive attributes characteristic of concrete. The term “special” connotes enhanced strength, durability, and solidity in concrete. The production of specialized concrete involves the incorporation of distinct components via specific procedures following specific criteria. Specialized concrete is required to construct unique structures such as power plants, offshore buildings, docks, and airports. Each of these unique structures is essential for survival in harsh conditions, including sulfate, chemical, acid, and chloride attacks, as well as other surface characteristics. Concrete is a versatile material that exhibits good compressive strength …

The Role Of Young Architects As Entrepreneurship Generational Units In Shaping The Future Of Architecture, Attaa H. Al Obaidi, Anwar. S. Al-Qaraghuli

Al-Esraa University College Journal for Engineering Sciences

Youth are the pillar of nations and the secret of their renaissance, thebuilders of their civilization and the line of defense, the main participants inbasic planning processes, and the agents of change to build a world that iscompatible with the aspirations of future generations. This applies to the field ofarchitecture in terms of the importance of young architects in shaping it underthe challenges it faces, which impose interaction in a manner commensuratewith the emerging requirements and needs. This research is based on theconsideration that young architects are an integrated phenomenon thatcontributes to shaping architectural production according to the data of …

Using Artificial Intelligence To Diagnose Demented In The Elderly, Ohood Fadil Alwan

Al-Esraa University College Journal for Engineering Sciences

In addition to possible other symptoms, memory loss and impairment are the hallmarks of Demented or Alzheimer’s disease (AD). Despite the fact that dementia is incurable and has a significant negative impact on patients' lives, an early diagnosis can help start the right treatment and prevent additional brain damage. Over the years, machine learning techniques have been used to classify AD; nevertheless, the efficacy of the results depends on the use of multi-step classifiers and manually created features. Thanks to recent advances in deep learning, patterns may now be classified using neural networks' final stage. In order to diagnose dementia …

Risk Detection Of Gestational Diabetes In Early Pregnancy Depend On Artificial Neural Network, Sanaa Hammad Dhahi

Al-Esraa University College Journal for Engineering Sciences

Early prediction of gestational diabetes mellitus (GDM) risk is particularly important because it may enable more effective interventions and reduce cumulative maternal and fetal injury. The aim of this study is to develop machine learning (ML) models for early prediction of GDM using widely available variables, facilitating early intervention, and enabling the application of prediction models in settings where more complex tests are not accessible. In this paper, an artificial neural network (ANN) was used to detect the risk of gestational diabetes. A global dataset was used to collect clinical and experimental data from pregnant women and people with diabetes …

Impact Of Merging Basalt Fibers With Various Types Of Concrete And The Factors Affecting Them: A Review, Adil M. Jabbar, Lubna S. Dankha

Al-Esraa University College Journal for Engineering Sciences

This paper reviews effecting of blending basalt fibers into concreteon mechanical properties, ductility, and toughness. Based on concretecomponents, the perfect basalt fiber percentage can differ and is influencedby factors like fiber length, w/c ratio, and age. The beneficial basalt fiberspercentage is lower than that of steel fibers. Even with a low concentrationof basalt fibers, concrete tensile and flexural strength can be improved moreeffectively than a higher amount of steel fibers. As the amount of basaltfiber increases, the mix workability decreases. Additionally, the flow abilitymay drop slightly as the length of the fibers increases. Adding basalt fiber toconcrete can minimize drying …

Physical Properties Of Copper Niobium Nanolamellar Composites Fabricated By Accumulative Roll Bonding, Jared Justice

Nuclear Engineering ETDs

Nanolamellar composites with high interface density have increased strength due to interfaces serving as barriers to dislocation movement and high radiation damage resistance. However, these interfaces also serve as barriers to electron motion, reducing the electrical resistivity and thermal conductivity. This work seeks to understand the inherent tradeoff between strength and physical properties of nanolamellar composites produced by accumulative roll bonding with layer thickness ranging from 25 nm to 193 nm. The electrical resistivity was investigated over temperatures ranging from 2 K to 300 K. The effect of longitudinal rolling and cross rolling was also investigated. Electrical resistivity results were …

Modeling Of Asphalt Concrete For Cross-Anisotropic Visco-Elasticity And Heterogeneity, Zafrul Hakim Khan

Civil Engineering ETDs

Asphalt Concrete (AC) is a cross-anisotropic viscoelastic material. This study has developed a methodology to backcalculate the cross-anisotropic properties of the AC layer from the Falling Weight Deflectometer (FWD) sensor and pavement response data from embedded sensors inside a pavement section. This study has also developed a two-way coupled Multiscale Finite Element Model (MsFEM) with Phase Field Fracture (PFF) to study the microstructural heterogeneity and damage of the AC layer based on the actual field loadings. A Finite Difference Time Domain (FDTD) and Machine learning-based backcalculation algorithm were developed to determine the layer thickness and dielectric constant from air-coupled Ground …

Design, Fabrication And Characterization Of Zero Power Sensor/Harvester For Smart Grid Applications, Zeynel Guler

Mechanical Engineering ETDs

This study presents a flexible sensor/harvester device to be used in both electromagnetic sensing and energy harvesting applications for smart grids. When a current passes through a wire, the sensor detects the magnetic field created by that current. The sensor magnet interacts with the wire magnetic field resulting in a transfer of energy through the piezoelectric cantilever. Piezoelectric, conductive, magnetic, and magnetostrictive composite thin films were prepared to fabricate this device.

Initially, the magnet of the cantilever was optimized considering its shape, thickness, length, taper angle etc. via both simulations and experiments. Peak to peak voltage versus cantilever position graph …

Air-Jet Bioprinting Of Stem Cell-Encapsulated Alginate Micro-Droplets For Organoid Biomanufacturing, Mirabella B. Stump

Electronic Theses and Dissertations

Biomanufactured 3D-organoids show promise for modeling and treating various conditions, particularly insulin-dependent diabetes mellitus (type-1 diabetes). Pancreatic islet organoids serve as sustainable sources of insulin-producing β-cells, potentially restoring insulin regulation in patients and providing a long-term solution for diabetes. Hydrogel droplet printing is an emerging technique in regenerative medicine due to its advantageous tunability and biocompatibility; however, challenges of consistency, quality control, and scalability persist. To address these issues, we developed a novel air-jetting based droplet bioprinting system for the generation of monodispersed alginate micro-droplets. The objective of this project was to incorporate human induced pluripotent stem cells (hiPSCs) into …

Fabrication And Characterization Of Flexible Microelectrode Arrays On Kapton Polyimide For Implantable Spinal Cord Stimulation Applications, Nabil Jamhour

Theses and Dissertations

Recent advances in spinal cord stimulation (SCS) technology have made a significant impact in the treatment of chronic pain which is a prevalent issue amongst 20% of the population in developed nations. A few medical device manufactures have developed SCS devices that have been studied in clinical environments and reported to be effective and safe for commercial use. However, the current SCS devices available are bulky, rigid, and still present infection, fibrosis, discomfort, pulse delivery challenges and other concerns for patients. In this study, flexible electrodes processed on Kapton® polyimide films by physical vapor and inkjet deposition are fabricated and …