Open Access. Powered by Scholars. Published by Universities.®

Materials Science and Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

2021

Discipline
Institution
Keyword
Publication
Publication Type
File Type

Articles 541 - 570 of 708

Full-Text Articles in Materials Science and Engineering

Novel Design And Facile Synthesis Of Functional Nanostructures For Energy And Environmental Application, Zhuojun Wang Jan 2021

Novel Design And Facile Synthesis Of Functional Nanostructures For Energy And Environmental Application, Zhuojun Wang

Wayne State University Theses

Environmental pollution and energy crisis are two of the major obstacles in the development of a more sustainable society. It is an interesting but technically challenging task to design novel methods for the facile and scalable synthesis of multifunctional materials for applications in both energy storage and environmental remediation. In this thesis, I tried to design and synthesize novel nanostructured materials for energy and environmental applications, achieved highly promising results. I developed a facile electrochemical approach to synthesize the zinc oxide with the zinc element for photocatalytic reactions. It demonstrated dramatically improved performances in degradation of organic pollutant in water, …

Go to article

Uv-Ozone Oxide Treatments For High-Efficiency Silicon Photovoltaic Devices, Munan Gao Jan 2021

Uv-Ozone Oxide Treatments For High-Efficiency Silicon Photovoltaic Devices, Munan Gao

Electronic Theses and Dissertations, 2020-2023

Fabrication of solar cells with higher efficiency, simpler processes and lower cost is largely perceived as the ultimate goal for photovoltaic research. To reach such a goal each step needs to be refined and optimized. In this dissertation, a UV-ozone treatment is proposed as a simple and versatile process that can be applied to multiple fabrication steps for improvement. The UV-ozone cleaning method provides comparable surface cleaning quality to more expensive and hazardous industrial standard RCA clean with less chemical used. A good passivation quality was achieved on both n-type and p-type silicon wafer by a silicon oxide/aluminum oxide passivation …

Go to article

Investigation Of Cation Exchange Behaviors Of FaXMa1-XPbl3 Films Using Dynamic Spin Coating, Hyang Mi Yu, Byeong Geun Jeong, Dae Young Park, Seong Chu Lim, Gon Namkoong, Mun Seok Jeong Jan 2021

Investigation Of Cation Exchange Behaviors Of FaXMa1-XPbl3 Films Using Dynamic Spin Coating, Hyang Mi Yu, Byeong Geun Jeong, Dae Young Park, Seong Chu Lim, Gon Namkoong, Mun Seok Jeong

Applied Research Center Publications

In this study, we fabricated and characterized uniform multi-cation perovskite FAxMA1−xPbI3 films. We used the dynamic spin-coating method to control the cation ratio of the film by gradually increasing the FA+, which replaced the MA+ in the films. When the FA+ concentration was lower than xFA ~0.415 in the films, the stability of the multi-cation perovskite improved. Above this concentration, the film exhibited δ-phase FAPbI3 in the FAxMA1−xPbI3 films. The formation of δ-phase FAPbI3 disturbed the homogeneity of the photoluminescence spatial distribution and suppressed the absorption spectral bandwidth …

Go to article

Applied Machine Learning In Extrusion-Based Bioprinting, Shuyu Tian Jan 2021

Applied Machine Learning In Extrusion-Based Bioprinting, Shuyu Tian

Theses and Dissertations

Optimization of extrusion-based bioprinting (EBB) parameters have been systematically conducted through experimentation. However, the process is time and resource-intensive and not easily translatable across different laboratories. A machine learning (ML) approach to EBB parameter optimization can accelerate this process for laboratories across the field through training using data collected from published literature. In this work, regression-based and classification-based ML models were investigated for their abilities to predict printing outcomes of cell viability and filament diameter for cell-containing alginate and gelatin composite hydrogels. Regression-based models were investigated for their ability to predict suitable extrusion pressure given desired cell viability when keeping …

Go to article

Tailoring Texture, Microstructure, And Shape Memory Behavior Of Niti Alloys Fabricated By L-Pbf-Am, Sayed Ehsan Saghaian N.E. Jan 2021

Tailoring Texture, Microstructure, And Shape Memory Behavior Of Niti Alloys Fabricated By L-Pbf-Am, Sayed Ehsan Saghaian N.E.

Theses and Dissertations--Mechanical and Aerospace Engineering

Laser Powder Bed Fusion (L-PBF) is one of the most promising Additive Manufacturing (AM) methods to fabricate near net-shape metallic materials for a wide range of applications such as patient-specific medical devices, functionally graded materials, and complex structures. NiTi shape memory alloys (SMAs) are of great interest due to a combination of unique features, such as superelasticity, shape memory effect, high ductility, work output, corrosion resistance, and biocompatibility that could be employed in many applications in automotive, aerospace, and biomedical industries. Due to the difficulties with traditional machining and forming of NiTi components, the ability to fabricate complex parts, tailor …

Go to article

Viscoelasticity Of Ptfe-Based Face Seals, Bo Tan Jan 2021

Viscoelasticity Of Ptfe-Based Face Seals, Bo Tan

Theses and Dissertations--Mechanical and Aerospace Engineering

PTFE-based materials are widely used in areas of tribology, particularly in seal and bearing applications because of their outstanding self-lubricating properties. Often in dynamic seal applications there is a need for ultra-low mechanical friction loss between the sealing surfaces. Due to its extremely low friction coefficient, there is interest in employing Polytetrafluoroethylene (PTFE) materials in such applications. One challenging aspect of employing PTFE is that these materials are viscoelastic and plastic. This dissertation concentrates on the modeling of viscoelastic material response when used as mechanical face seals with a focus on PTFE-based materials. First, the viscoelastic characteristics are measured through …

Go to article

Development Of An Injectable Methylcellulose Hydrogel System For Nucleus Pulposus Repair And Regeneration, Nada A. Haq-Siddiqi Jan 2021

Development Of An Injectable Methylcellulose Hydrogel System For Nucleus Pulposus Repair And Regeneration, Nada A. Haq-Siddiqi

Dissertations and Theses

Low back pain is the most common cause of disability in the world and is often caused by degeneration or injury of the intervertebral disc (IVD). The IVD is a complex, fibrocartilaginous tissue that allows for the wide range of spinal mobility. Disc degeneration is a progressive condition believed to begin in the central, gelatinous nucleus pulposus (NP) region of the tissue, for which there are few preventative therapies. Current therapeutic strategies include pain management and exercise, or surgical intervention such as spinal fusion, none of which address the underlying cause of degeneration. With an increasingly aging population, the socioeconomic …

Go to article

Microstructure Evolution And Mechanical Property Response Of Tc11 Titanium Alloy Under Electroshock Treatment, Chang Liu, Lechun Xie, Dongsheng Qian, Lin Hua, Liqiang Wang, Lai-Chang Zhang Jan 2021

Microstructure Evolution And Mechanical Property Response Of Tc11 Titanium Alloy Under Electroshock Treatment, Chang Liu, Lechun Xie, Dongsheng Qian, Lin Hua, Liqiang Wang, Lai-Chang Zhang

Research outputs 2014 to 2021

© 2020 The Authors This work investigated the effects of electroshock treatment (EST) on the microstructure variation and mechanical properties of TC11 alloy. The average hardness of the specimens decreased from 358 HV to 328 HV after EST of 0.04 s, then increased to 396 HV after EST of 0.06 s. After EST, the yield strength of specimen declined from 959 MPa to 797 MPa after EST of 0.04 s, and then increased to 1265 MPa after EST of 0.06 s, but the fracture strain decreased continuously. The variation in mechanical properties was closely related to the phase transition from …

Go to article

Synthesis And Catalytic Properties Of Metal-Organic Frameworks Mimicking Carbonic Anhydrase, Longji Li Jan 2021

Synthesis And Catalytic Properties Of Metal-Organic Frameworks Mimicking Carbonic Anhydrase, Longji Li

Mahurin Honors College Capstone Experience/Thesis Projects

The natural enzyme carbonic anhydrase has gained attention in recent years for its ability to catalyze the interconversion of aqueous carbon dioxide (CO2) and bicarbonate. However, it lacks the efficiency to qualify practical usage on a large scale due to its inherent deficiency and fragile nature. On the other hand, its active center can be used as an ideal model for the design of novel catalytic materials targeting carbon dioxide capture and sequestration. This study focused on the synthesis of a zinc-based metal-organic framework (Zn-MOF-1) mimicking the carbonic anhydrase using the solvothermal method. Important properties such as catalytic …

Go to article

Quality Assurance Of Lightweight Structures Via Phase-Based Motion Estimation, Ikenna E. Ifekaonwu Jan 2021

Quality Assurance Of Lightweight Structures Via Phase-Based Motion Estimation, Ikenna E. Ifekaonwu

College of Graduate Studies: Theses & Dissertations

In recent years, lightweight structures have become mature and adopted in various applications. The importance of quality assurance cannot be overemphasized hence extensive research has been conducted to assess the quality of lightweight structures. This study investigates a novel process that exploits motion magnification to investigate the damage characteristics of lightweight mission-critical parts. The goal is to assure the structural integrity of 3D printed structures and composite structures by determining the inherent defects present in the part by exploiting their vibration characteristics. The minuscule vibration of the structure was recorded with the aid of a high-speed digital camera, and the …

Go to article

Interface Characterization In Tungsten Fiber/Zr-Based Bulk Metallic Glass Matrix Composite, Mohammad Ammar Mofid, Mostafa Jafarzadegan Jan 2021

Interface Characterization In Tungsten Fiber/Zr-Based Bulk Metallic Glass Matrix Composite, Mohammad Ammar Mofid, Mostafa Jafarzadegan

Journal of Metals, Materials and Minerals

In this research, Zr55Cu30Al10Ni5 bulk metallic glass (BMG) alloy is used as the base material to form tungsten fiber reinforced BMG composites. The composites are synthetized using melt infiltration casting method and their microstructure and compressive properties are investigated. Two different infiltration times of 10 min and 15 min are used to produce the composites. The microstructural evaluation of the interface between tungsten fiber and BMG matrix reveals that a narrow reaction band emerges between the tungsten wires and BMG alloy. Some portions of this layer are broken into the fine Zr/W-rich particles …

Go to article

On The Mechanical Properties Of Al/Cu-Grid/Al Intermetallic Composite, Hamza Essoussi, Said Ettaqi Jan 2021

On The Mechanical Properties Of Al/Cu-Grid/Al Intermetallic Composite, Hamza Essoussi, Said Ettaqi

Journal of Metals, Materials and Minerals

The present paper deals with the experimental investigation of new process combining static compression with high temperature as a simple way to prepare new Al/Cu-grid/Al metallic composite (MC) that consists of Aluminum matrix and Copper grid acting as ductile reinforcement stacked between the Al sheets. At the stage of composite fabrication, two different thermal cycles were tested to highlight the effect of processing temperature on the layers’ adherence and the mechanical properties of the prepared composites. Consequently, the microstructural and mechanical results revealed that the compression at 630℃ for 30 min, then furnace cooled to 450℃ followed by air cooling …

Go to article

Thermal Behavior Of Solid Acids In The Rb3h(So4)2-Rbhso4 System Under Ambient Atmosphere, Chatr Panithipongwut Kowalski, Permpoon Chaijaroen, Farook Kaewniyom Jan 2021

Thermal Behavior Of Solid Acids In The Rb3h(So4)2-Rbhso4 System Under Ambient Atmosphere, Chatr Panithipongwut Kowalski, Permpoon Chaijaroen, Farook Kaewniyom

Journal of Metals, Materials and Minerals

The thermal behavior of solid acids in the Rb3H(SO4)2-RbHSO4 system under ambient atmosphere has been studied in comparison to the previously reported high-temperature behavior of the same system under humidified atmosphere. The findings showed that, under this level of humidity, the transition of RbHSO4, the transition of Rb5H3(SO4)4, and the disproportionation of Rb3H(SO4)2, occurred at the same temperatures as those under humidified atmosphere. However, the results from differential scanning calorimetry did not reveal the reaction temperature between Rb3H(SO4)2 and RbHSO4 due to the slow process. The dehydration temperatures of Rb5H3(SO4)4 were surprisingly similar between the systems under low and high …

Go to article

Synthesis Of A Two-Part Geopolymer From Red Mud And Silica Fume, Arup Kumar Mandal Jan 2021

Synthesis Of A Two-Part Geopolymer From Red Mud And Silica Fume, Arup Kumar Mandal

Journal of Metals, Materials and Minerals

In this present study, the development of a two-part geopolymer from waste red mud (RM) and silica fume (SF) by alkali activator is examined. The influence of silica fume addition, alkali concentration, curing duration are studied. The compressive strength of geopolymers has been achieved 0.8 MPa to 8 MPa with varying different compositions and synthesis parameters. The optimum RM/SF ratio is 60/40, the optimum solid/solution ratio is 1.8 gmL-1 or 2 gmL-1, and the optimum Na2SiO3/NaOH ratio is 0.5 day for 28 days curing time. The incorporation of iron in the geopolymer matrix contributes to geopolymerization. The study suggests that …

Go to article

Debinding Behaviour And Sintering Temperature-Dependent Features Of Coloured Zirconia Fabricated By Ceramic Injection Moulding, Wantanee Buggakupta, Thanakorn Wasanapiarnpong, Nutthita Chuankrerkkul Jan 2021

Debinding Behaviour And Sintering Temperature-Dependent Features Of Coloured Zirconia Fabricated By Ceramic Injection Moulding, Wantanee Buggakupta, Thanakorn Wasanapiarnpong, Nutthita Chuankrerkkul

Journal of Metals, Materials and Minerals

Zirconia (ZrO2) is one of ceramic materials that has very good mechanical and chemical properties suitable for biomedical applications as well as other industrial applications. ZrO2 ceramics, in fact, has been used in orthodontic dentistry. Nowadays, ZrO2 has been played its role in decorative and jewelry purposes, such as watchcases and artificial stones. Ceramic injection moulding (CIM), a near-net shape manufacturing process that can produce small, complex-shaped components and is suitable for large volume production, is one of the best powder fabrication methods. In this work, CIM was carried out in order to form the coloured-ZrO2 specimens. Binders used in …

Go to article

Graphene Enhanced Linear Low-Density Polyethylene Nanocomposites By Premixing And Melt Compounding, Wan Nazri Wan Busu, Ruey Shan Chen, Muhammad Jefri Mohd Yusof, Sahrim Ahmad Jan 2021

Graphene Enhanced Linear Low-Density Polyethylene Nanocomposites By Premixing And Melt Compounding, Wan Nazri Wan Busu, Ruey Shan Chen, Muhammad Jefri Mohd Yusof, Sahrim Ahmad

Journal of Metals, Materials and Minerals

In this study, linear low-density polyethylene/graphene nanoplatelets (LLDPE/GNPs) nanocomposites were prepared from conventional melt-mixing method and our new approach; two-step premix mixing technique. Indirect mixing technique (IDT) was employed to fabricate a premix of LLDPE/ GNPs in the ratio of 80:20 wt%. The effects of GNPs loadings and the processing method of nanocomposites on the mechanical strength, decomposition temperature, crystallinity, electrical impedance and morphology were investigated. Irrespective of processing methods, the prepared nanocomposites exhibited crystalline structure due to the presence of GNPs whilst the degradation temperature was recorded to be increased with GNPs loadings that signified improved thermal stability. The …

Go to article

Enhancing Stability And Antioxidant Efficacy Of Fisetin By Encapsulating As Β-Cyclodextrin Inclusion Complex With Porous Polylactic Acid Film From Breath Figure, Charasphat Preuksarattanawut, Warinyupa Mangmee, Munchumas Prousoontorn, Ekasit Nisarattanaporn, Krisana Siraleartmukul Jan 2021

Enhancing Stability And Antioxidant Efficacy Of Fisetin By Encapsulating As Β-Cyclodextrin Inclusion Complex With Porous Polylactic Acid Film From Breath Figure, Charasphat Preuksarattanawut, Warinyupa Mangmee, Munchumas Prousoontorn, Ekasit Nisarattanaporn, Krisana Siraleartmukul

Journal of Metals, Materials and Minerals

This research aims to investigate the scope of fisetin (FIT)/β-cyclodextrin (β-CD) inclusion complexes with the ratios of 1:2 and 2:1 mole by means of freeze-drying, kneading and physical mixing methods (controlled process). Moreover, the complex compounds are analyzed by Fourier-Transform Infrared Spectroscopy (FTIR) and Differential Scanning Calorimetry (DSC). The results show that the most suitable preparation method of fisetin (FIT)/β-CD complex is the freeze-drying method with the fisetin (FIT) to β-CD ratio at 1:2. The emission of FIT/β-CD was investigated and it is found that the emission rate of freeze-dried FIT/β-CD in 1:2 ratio by freeze-drying method is lower than …

Go to article

Using Shrimp Shells As Based Catalysts For Fame Production From Palm Oil Feedstock, Assadaporn Poonanan, Anupat Prukpaiboon, Paul Egwuonw Dim, Mutsee Termtanun Jan 2021

Using Shrimp Shells As Based Catalysts For Fame Production From Palm Oil Feedstock, Assadaporn Poonanan, Anupat Prukpaiboon, Paul Egwuonw Dim, Mutsee Termtanun

Journal of Metals, Materials and Minerals

In this study, waste shrimp shells from industry were used as a heterogeneous bio-based catalyst for trans-esterification reaction of fresh palm oil. CaO was prepared from shrimp shells calcination. Surface area, phase composition, and basicity of the calcined shrimp shell catalysts were studied using N2 adsorption (BET), X-ray diffraction (XRD), and CO2 temperature-programmed-desorption (CO2-TPD), respectively. The influence of shrimp shells calcination temperature and operation condition, methanol to palm oil ratio on trans-esterification reaction, were investigated. Five hours trans-esterification was carried out at 65℃ using different shrimp shell at four different calcination temperature: 700, 750, 800 and 850℃ with 9:1 methanol …

Go to article

Preparation Of Transparent Alumina Thin Films Deposited By Rf Magnetron Sputtering, Busarin Noikaew Noikaew, Laksana Wangmooklang, Saisamorn Niyomsoan, Siriporn Larpkiattaworn Jan 2021

Preparation Of Transparent Alumina Thin Films Deposited By Rf Magnetron Sputtering, Busarin Noikaew Noikaew, Laksana Wangmooklang, Saisamorn Niyomsoan, Siriporn Larpkiattaworn

Journal of Metals, Materials and Minerals

Alumina (Al2O3) thin films were prepared by RF magnetron sputtering technique using Al2O3 ceramic target. Effects of sputtering powers and oxygen gas mixtures were investigated and the optimized coating condition was applied on semi-precious gemstones. RF sputtering powers were varied to optimize the transparency of the films. Besides, the oxygen gas mixtures were also studied at the optimized sputtering power with a constant sputtering pressure. Optical and physical properties of the thin films were investigated using UV-Vis Spectrophotometer, FESEM, XRF, GIXRD, XRR including a microscratch tester. The Al2O3 films were highly transparent in the visible region in form of an …

Go to article

Extraction Of Cellulose Nanofibers From Empty Palm Fruit Bunches Via Mechanical Defibrillation, Zi-Qian Tan, Takaomi Kobayashi, Duangdao Aht-Ong Jan 2021

Extraction Of Cellulose Nanofibers From Empty Palm Fruit Bunches Via Mechanical Defibrillation, Zi-Qian Tan, Takaomi Kobayashi, Duangdao Aht-Ong

Journal of Metals, Materials and Minerals

In recent years, there has been an increasing interest in finding alternative material to replace fossil-oil based product due to the environmental concern. Lignocellulosic biomass has emerged as the promising candidate due to its low-cost and sustainability. The objective of this work was to prepare cellulose nanofibers (CNFs) from empty palm fruit bunches (EPFB), which are the waste originating from palm oil industry. Cellulose fibers were first extracted from EPFB by chemical treatment, followed by mechanical disintegration using high-pressure homogenization. Fiber concentration and defibrillation time during mechanical treatment were studied to investigate their effects on the properties of produced nanofibers. …

Go to article

Investigations On Phase Coexistence And Functional Properties Of Bczt Lead-Free Piezoceramic, Jirapa Tangsritrakul, Thiyanee Sonkami, Chumpon Wichittanakom, Chotiros Dokkhan, Panithi Wiroonpochit Jan 2021

Investigations On Phase Coexistence And Functional Properties Of Bczt Lead-Free Piezoceramic, Jirapa Tangsritrakul, Thiyanee Sonkami, Chumpon Wichittanakom, Chotiros Dokkhan, Panithi Wiroonpochit

Journal of Metals, Materials and Minerals

Large piezoelectric properties was observed in (1-x)BZT-(x)BCT where x=0.5 or Ba0.85Ca0.15Ti0.9Zr0.1O3 (denoted as BCZT), leading to a promising candidate for lead-free piezoelectric materials. However, phase formation of the BCZT is controversial and still unclear since various phase coexistences were identified in the literatures, for instances, the mixed phases of rhombohedral-tetragonal (R-T), ortho-rhombic-tetragonal (O-T) or rhombohedral-orthorhombic-tetragonal (R-O-T). Additionally, it is well known that the crystal structure plays a crucial role on the occurrence of polarization in the piezoceramics. Therefore, this work aims to investigate the coexistence of phase formation at room temperature for the BCZT powder and ceramic. Moreover, the electrical …

Go to article

The Effect Of Phosphogypsum On Stabilizing Clay Soil And Improving Its Properties For Use As Foundation Soil, Mai Yahya Maaitah, Mus'ab Ziad Banat Jan 2021

The Effect Of Phosphogypsum On Stabilizing Clay Soil And Improving Its Properties For Use As Foundation Soil, Mai Yahya Maaitah, Mus'ab Ziad Banat

Journal of Metals, Materials and Minerals

Expansive soil covers large areas in a variety of regions in Jordan which is insufficient to meet the engineering specifications in construction. Phosphogypsum is considered to be the main by-product material which comes from phosphate rock deposits that is available in Jordan. The main purpose of this research is to study the effects of stabilization by phosphogypsum on expansive soil properties. Three Jordanian regions were chosen to represent the expansive soils, Irbid, Madaba, and Abu-Nusire city. Soils were mixed with phosphogypsum at different percentages by dry weight of soil. Some of the representative laboratory tests for swell properties were conducted: …

Go to article

Influence Of Precursor Preparation On The Synthesis Of Boron Carbide From Glutinous Rice Flour, Kannigar Dateraksa, Sujarinee Sinchai Jan 2021

Influence Of Precursor Preparation On The Synthesis Of Boron Carbide From Glutinous Rice Flour, Kannigar Dateraksa, Sujarinee Sinchai

Journal of Metals, Materials and Minerals

Boron carbide is a promising candidate for a variety of applications, including blasting nozzles, neutron moderators, and lightweight armor. Using of inexpensive and readily available starting materials which can react with boric acid to form B-O-C bonds, e.g., glutinous rice flour, is one of alternative means to produce high purity boron carbide powder at low temperature. In this study, boric acid and glutinous rice flour, boron and carbon sources, were used for synthesizing B4C powder by the carbothermic reduction. The mole ratios of boric acid to glutinous rice flour ranging from 1:1 to 2.5:1 were formulated and mixed by continuous …

Go to article

The Effect Of Artificial Defects On The Fatigue Characteristics Of Aisi 4340 Steel, Yakov B. Unigovski, Dmitry Fishman, Liat Fishman, Liron Shichman, Ofir Moshe, Roni Shneck, Emmanuel Gutman Jan 2021

The Effect Of Artificial Defects On The Fatigue Characteristics Of Aisi 4340 Steel, Yakov B. Unigovski, Dmitry Fishman, Liat Fishman, Liron Shichman, Ofir Moshe, Roni Shneck, Emmanuel Gutman

Journal of Metals, Materials and Minerals

This study examined the fatigue life (Nf) and fatigue limit (FL) of AISI 4340 steel in relation to surface roughness, artificial defects and shot peening. Artificial surface defects on fatigue specimens were obtained by electrical discharge machining (EDM) or by pre-corrosion in 3.5% NaCl and perchloric acid solutions, followed by a fatigue test. The presence of artificial defects of various sizes, taken into account by the area  parameter, led to a significant decrease in fatigue characteristics, while shot peening contributed to their noticeable improvement. Defects resulting from electrochemical corrosion had a much greater negative effect on fatigue …

Go to article

Experimental And Numerical Characterization Of Fatigue Crack Propagation In High-Speed Railway Wheel Er8 Steel, Chaichayo Suetrong, Vitoon Uthaisangsuk Jan 2021

Experimental And Numerical Characterization Of Fatigue Crack Propagation In High-Speed Railway Wheel Er8 Steel, Chaichayo Suetrong, Vitoon Uthaisangsuk

Journal of Metals, Materials and Minerals

In this work, characteristics of fatigue crack growth in the Paris regime of the rail wheel steel grade ER8 were investigated. Experimental crack growth tests under different cyclic loads of a compact tension (CT) specimen and corresponding FE simulations were carried out. The extended FE method (XFEM) coupled with damage evolution based on the strain energy release rate or the Paris law was applied to describe the crack propagation mechanism in the tested CT samples. Hereby, the fatigue fracture model parameters were firstly determined from the experimental data. It was found that the predicted crack growth rates agreed well with …

Go to article

Effect Of Cladding Of Stellite-6 Filler Wire On The Surface Of Ss316l Alloy Through Cold Metal Arc Transfer Process, Thinesh Babu Thiagarajan, Sengottuvel Ponnusamy Jan 2021

Effect Of Cladding Of Stellite-6 Filler Wire On The Surface Of Ss316l Alloy Through Cold Metal Arc Transfer Process, Thinesh Babu Thiagarajan, Sengottuvel Ponnusamy

Journal of Metals, Materials and Minerals

In this work, Cladding was done on SS316L alloy through the CMT process using Stellite-6 filler wire. 31 experiments were done at different welding conditions as per CCD matrix. The cladding specimens were characterized by macro and micro-study, Vickers microhardness evaluation and corrosion resistance analysis. An optical microscope, SEM-EDAX, and XRD were used to predict the structural characterizations, presence and the distributions of the elements. Based on the study higher voltage & welding speed showed appreciable hardness at the interface & cladding regions. The thickness of the interface was noted at a maximum of 190 μm. The EDS spectra showed …

Go to article

Preparation Of A Mixed Al/Sc Nano-Oxide Derived From The Bauxite Residue (Red Mud) Via The Sulfuric Acid Roasting–Leaching–Precipitation Process, Razieh Habibpour, Eslam Kashi, Mehdi Janfada Jan 2021

Preparation Of A Mixed Al/Sc Nano-Oxide Derived From The Bauxite Residue (Red Mud) Via The Sulfuric Acid Roasting–Leaching–Precipitation Process, Razieh Habibpour, Eslam Kashi, Mehdi Janfada

Journal of Metals, Materials and Minerals

In this study, three methods were used and compared for the selectable extraction of aluminum/ scandium with the least amount of iron in red mud (RM) samples from the Iran alumina plant in Jajarm as follows: 1) RM direct acid leaching with H2SO4, 2) RM washing with hydrochloric acid and oxalic acid before leaching with H2SO4, and 3) RM sulfuric acid roasting-leaching-precipitation.  The aim was to extract the highest amount of scandium while preventing the leaching of other metals, especially iron. Due to any discriminative features, the selective separation of Al/Sc with …

Go to article

Study Of Mechanical Properties And Characteristics Of Eco-Fibres For Sustainable Children's Clothing, Siti Shukhaila Shaharuddin, Marzie Hatef Jalil, Kaveh Moghadasi Jan 2021

Study Of Mechanical Properties And Characteristics Of Eco-Fibres For Sustainable Children's Clothing, Siti Shukhaila Shaharuddin, Marzie Hatef Jalil, Kaveh Moghadasi

Journal of Metals, Materials and Minerals

The aim of this paper is to study the application of eco-fibres as a new approach to achieve the multifunctional design for children’s clothing toward sustainability in the clothing industry. In this regard, this study focuses on the evaluation of the fabrics’ mechanical properties including tensile strength and microstructural details as critical points for multifunctional children's clothing purposes. The eco-fibre fabrics studied are organic cotton twill and recycled polyester. Studies have proven that frequent laundering and dry-cleaning result in increased pilling. Furthermore, high quality of colour fastness properties was found in 100% organic woven cotton fabric and recycled polyester fabric …

Go to article

Effect Of Micro Graphite Particles On The Microstructure And Mechanical Behavior Of Aluminium 6061 (Al-Mg-Si) Alloy Composites Developed By Novel Two Step Casting Technique, Madeva Nagaral, Raghavendra Pai K., V. Auradi, Bharath V., Shanawaz Patil, Mahantesh S. Tattimani Jan 2021

Effect Of Micro Graphite Particles On The Microstructure And Mechanical Behavior Of Aluminium 6061 (Al-Mg-Si) Alloy Composites Developed By Novel Two Step Casting Technique, Madeva Nagaral, Raghavendra Pai K., V. Auradi, Bharath V., Shanawaz Patil, Mahantesh S. Tattimani

Journal of Metals, Materials and Minerals

In the present research, the effect of micron sized graphite addition on the microstructure and tensile failure of Al6061 alloy has been studied. The Al6061 alloy metal matrix composites reinforced with 6, 9 and 12 varying weight percentages of graphite particles were fabricated by novel two step stir cast route which helps in improving the wettability of Al6061 alloy matrix with graphite particles. The synthesized composites were subjected to microstructural studies, density, hardness and tensile properties testing. Microstructural characterizations of obtained samples were carried out by SEM microscopy, EDS and XRD patterns. The occurrence of graphite particles were confirmed by …

Go to article

Assessment Of Hydrothermal Parameters On Alkaline Activation Of Fly Ashes Using A Central Composite Design, Ivan Supelano García, César Armando Ortíz Otálora, Carlos Arturo Parra Vargas, Julieth Alexandr Mejía Gómez Jan 2021

Assessment Of Hydrothermal Parameters On Alkaline Activation Of Fly Ashes Using A Central Composite Design, Ivan Supelano García, César Armando Ortíz Otálora, Carlos Arturo Parra Vargas, Julieth Alexandr Mejía Gómez

Journal of Metals, Materials and Minerals

Coal fly ash (CFA) is a powder generated during combustion of coal; its improper disposal constitutes an environmental issue. To minimize this problem, one of the uses of CFA is as feedstock for production of zeolite. Different studies have shown that zeolites may be easily obtained from CFA by relatively cheap and fast conversion processes. Most of these studies have been focused on the study of the zeolite synthesis using classical methods through changing one factor per time and fixing the other factors, where it illustrates the impact of each variable individually via a huge number of experiments, however it …

Go to article

First Prev Next Last