Materials Science and Engineering Commons^™

Ultra-Small Gold Nanoparticles By Galvanic Replacement Of Larger Silver Nanoparticles, Chang Ting Lin

Material Science and Engineering Theses - Archive

In the last two decades, Au nanoparticles have been extensively explored for their biomedical applications, which is mainly driven by their biocompatibility and special optical properties known as surface plasmon resonance (SPR) effect. A variety of Au nanoparticles with different sizes and shapes have been synthesized and tested both in vitro and in vivo. For in vivo applications, it is usually required that Au nanoparticles can be cleared through urine (renal clearance). Renal clearance is determined by several factors of Au nanoparticles, including size, shape and surface modification. In this thesis, for the purpose of using Au nanoparticles as carriers …

Element-Specific Nanoparticle Placement Toward Fabricating Multi-Element Metastructures, Lei Wu

Material Science and Engineering Theses - Archive

Nanoscale entities such as semiconductor nanoparticles, magnetic nanoparticles, metal nanoparticles, and dielectric nanoparticles have attracted a lot of attention due to their novel electrical, optical, and magnetic properties that their bulk materials cannot produce. These unique properties promise applications in nano-optical devices, ultra-sensitive sensors, single electron transistors, and high-density data storages. Moreover, to these captivating properties of the individual nanoparticles, it has been found that novel and scientifically important properties can be obtained when nanoparticles are arranged in specific configurations. Examples include nanoparticle dimers, hexamers, heptamers, and nanoparticle arrays. Until now, however, most studies have focused on one-element nanoparticle systems. …

Research Of Electro-Optical Effect In Metal Halide Perovskites By Fabry-Perot Interometer Method, Hanxiang Yin

McKelvey School of Engineering Graduate Student Theses & Dissertations

Perovskites have been investigated a lot by present and reported with outstanding optoelectronic properties. However, so far there is no publications about another important property, the electro-optical (EO) effect which is related to important applications in photolithography. This thesis is mainly mean to calculate the EO constants of one kind of organic perovskite material, CH₃NH₃PbI₃, which has been reported to have good capability of forming film by spin-coating, through the way of putting the film of CH₃NH₃PbI₃ between two layers of metal mirrors to build a Fabry-Perot interferometer and …

Development Of A Multi-Probe Kelvin Scanner Device For Industrially-Relevant Characterization Of Surface-Activated Carbon Fiber Reinforced Thermoplastic Composites, Kirby Simon

McKelvey School of Engineering Graduate Student Theses & Dissertations

Carbon fiber reinforced thermoplastic (CFRTP) composites are becoming increasingly attractive materials in manufacturing due to their lightweight nature, mechanical strength, and corrosion resistance. Surface activation of these materials is usually required during processing to increase the bond strength of assemblies (aerospace and automotive industries) or improve adhesion with implants (biomedical industry). Industrially-relevant, nondestructive quality control methods for assessing the activation state of these materials do not currently exist, however. Applying principles discovered through the use of scanning probe microscopy, a multiple-probe Kelvin scanning (MPKS) device has been developed that can assess the uniformity of the activation state of plasma-treated CFRTP …

Silicone Tadpole: Research Into Soft Bodies, Danielle Fernandez

Mechanical Engineering Undergraduate Honors Theses

In this thesis, research is conducted in the area of soft robotics by building a soft tadpole that can deform with a specific air pressure. The goal is to mimic the motion of an organic tadpole in respect to its S-shaped tail movement. The angle of deformation, derived from material mechanic theories, ranges from 45 to 80 degrees for this type of movement. The design includes a head compartment which acts as a tank to transfer nitrogen pressure and a tail section that receives the said pressure and bends as a result. The tail section was designed with two rows …

Mechanical Properties Of Heusler Alloys, Wesley Everhart, Joseph William Newkirk

Materials Science and Engineering Faculty Research & Creative Works

Heusler alloys have been a significant topic of research due to their unique electronic structure, which exhibits half-metallicity, and a wide variety of properties such as magneto-calorics, thermoelectrics, and magnetic shape memory effects. As the maturity of these materials grows and commercial applications become more near-term, the mechanical properties of these materials become an important factor to both their processing as well as their final use. Very few studies have experimentally investigated mechanical properties, but those that exist are reviewed within the context of their magnetic performance and application space with specific focus on elastic properties, hardness and strength, and …

Modeling And Experimental Determination Of Physical Properties Of Ge X Ga Y Se 1-X-Y Chalcogenide Glasses Ii: Optical And Thermal Properties, Jason Lonergan, Charmayne Lonergan, John Mccloy, Kathleen A. Richardson

Materials Science and Engineering Faculty Research & Creative Works

This study systematically analyzed the correlation between topological structure and chemical ordering on the optical and thermal properties of synthesized material in the glass forming region of the Ge_xGa_ySe_1-x-y ternary. A series of ten compositions from 5 to 30 mol% Ge and 5 to 15 mol% Ga were examined within the ternary, showing broadband infrared properties with transmission from 1 to 25 μm. Topological constraint theory applied to compositions examined exhibited sharp inflection at the average coordination number of = 2.67 defined as the chemical threshold where the glass network consists of tetrahedral Ge(Ga)Se_{2 …}

Device Engineering Of Algan/Gan Hemts For Applications In Power-Electronic And Sensing, Isra Mahaboob

Legacy Theses & Dissertations (2009 - 2024)

The research work presented in this Ph.D. thesis focuses on the engineering of AlGaN/GaN high electron mobility transistors (HEMTs) for the development of future device technology in power electronic and sensing applications.

Synthesis And Characterization Of Dielectric And Multiferroic Nanocrystalline Transition Metal Oxide Materials And Nanocomposites, Frederick A. Pearsall

Dissertations, Theses, and Capstone Projects

Nanocrystalline transition metal oxides with unique chemical, physical, magnetic and dielectric properties have very broad applications, ranging from photocatalysis, capacitor energy storage and 4-state memory. Frequency stable, high permittivity nanocomposite capacitors produced under mild processing conditions offer an attractive replacement to MLCCs derived from conventional ceramic firing. In one project reported herein, 0-3 nanocomposites were prepared using BaTiO₃ (barium titanate, BTO) nanocrystals, suspended in a poly(furfuryl alcohol) matrix, resulting in a stable, high effective permittivity, low and stable loss dielectric. Effective medium approximations were used to compare this with similar nanocomposite systems. The use of synthesized BTO nanocrystal photocatalysts …

Fundamental Core Effects In Co-Cr-Fe-Ni Based High Entropy Alloys, Abhishek Mehta

Electronic Theses and Dissertations

High entropy alloys (HEAs) are near equiatomic multi-principal-element-alloys (MPEAs) which are different from traditional solvent-based multicomponent alloys. Based on initial work by Yeh and Co-workers, they were proposed to exhibit four "core" effects: high entropy, sluggish diffusion, lattice distortion, and cocktail effect. Present work investigates two of the four "core" effects, i.e. high entropy and sluggish diffusion effects, in Co-Cr-Fe-Ni based transition metal high entropy alloys. Solid-to-solid diffusion couple approach was adopted to investigate, these core effects. Experimental results contradicts the "high entropy" effect based on thermodynamics analysis: that the HEAs with low entropy of mixing may be thermodynamically more …

(111)-Oriented Gallium Arsenide Tensile-Strained Quantum Dots Tailored For Entangled Photon Emission, Christopher Schuck

Boise State University Theses and Dissertations

The use of molecular beam epitaxy (MBE) to create quantum dots (QDs) embedded in solid-state semiconductor media has been at the forefront of novel and record-breaking optoelectronic device development for many years. However, the wide range of semiconductor fabrication capabilities and the non-equilibrium growth parameters inherent to MBE mean that there are still many QD research frontiers that are yet to be explored.

This work focuses on a recently discovered method that permits, for the first time, the growth of QDs under tensile strain on non-(100) surfaces. My research explores the first (and currently only) optically active materials system for …

Bgaas Alloy Semiconductors For Lasers On Silicon, Joshua Mcarthur

Mechanical Engineering Undergraduate Honors Theses

In the world of semiconductors today, there is a large dissonance between optical devices and electrical application. Due to the limitations of electron transport, photonic integrated circuits are soon-to-be vital in fields like telecommunications and sensing. Right now, these PIC’s are mostly made from indium phosphide. Due to its ubiquitous nature, however, there is a huge push to integrate efficient optics with silicon. It’s cheap, abundant, dope-able, and our electronic infrastructure is based on it. The reason why silicon photonics aren’t already commercialized is because of silicon’s indirect bandgap—it is inefficient with optical applications. The problem with combining direct gap …

Plasmonic Properties Of Nanoparticle And Two Dimensional Material Integrated Structure, Desalegn Tadesse Debu

Graduate Theses and Dissertations

Recently, various groups have demonstrated nano-scale engineering of nanostructures for optical to infrared wavelength plasmonic applications. Most fabrication technique processes, especially those using noble metals, requires an adhesion layer. Previously proposed theoretical work to support experimental measurement often neglect the effect of the adhesion layers. The first finding of this work focuses on the impact of the adhesion layer on nanoparticle plasmonic properties. Gold nanodisks with a titanium adhesion layer are investigated by calculating the scattering, absorption, and extinction cross-section with numerical simulations using a finite difference time domain (FDTD) method. I demonstrate that a gold nanodisk with an adhesive …

Design Process Of A Novel Dynamic Mechanical Analysis Sample Preparation Methodology, Julian M. Richardson

Honors Theses

The technique of dynamic mechanical analysis (DMA) has been a frontrunner in the field of polymer science for decades. It’s used as a tool for characterization has been integral in mankind’s understanding of the properties of polymeric materials. The procedure for obtaining data using DMA is widespread and standardized, however the procedure for preparing the samples is a list of dimensions and tolerances with no mention of how to obtain said dimensions. Every research group using DMA is left to their own devices to prepare samples. This discontinuity can create the problem of nonuniform results across the scientific community. This …

Improved Data Acquisition Using A Novel Dynamic Mechanical Analysis Sample Preparation Technique: The Numbers Do Not Lie, Jordan J. Winetrout

Honors Theses

Dynamic mechanical analysis (DMA) is a technique commonly used to identify the thermomechanical properties of polymeric materials. In the aerospace industry, a typical DMA sample is a glassy epoxy-amine polymer network. On a laboratory scale, these types of materials are cured in a silicon mold and sanded by hand to yield a sample with testable dimensions. This preparation technique is time consuming and causes sample imperfections which negatively affects data acquisition. This thesis aims to absolve the issues with DMA sample preparation by using a custom vacuum housing and a DeWALT^TM brand orbital sander. This novel approach has been …

A Study On Ultrasonic Energy Assisted Metal Processing : Its Correeltion With Microstructure And Properties, And Its Application To Additive Manufacturing., Anagh Deshpande

Electronic Theses and Dissertations

Additive manufacturing or 3d printing is the process of constructing a 3-dimensional object layer-by-layer. This additive approach to manufacturing has enabled fabrication of complex components directly from a computer model (or a CAD model). The process has now matured from its earlier version of being a rapid prototyping tool to a technology that can fabricate service-ready components. Development of low-cost polymer additive manufacturing printers enabled by open source Fused Deposition Modeling (FDM) printers and printers of other technologies like SLA and binder jetting has made polymer additive manufacturing accessible and affordable. But the metal additive manufacturing technologies are still expensive …

Left Atrial Model, Borna Sobati, Sarah Porello, Tess Pate

Biomedical Engineering

The objective is to produce an electrophysiological model of an adult human left atrium. This model will be used to test mapping probe catheters used for locating cardiac arrhythmias against current technology used in practice. Dr. Chris Porterfield requested this model and other physicians or probe catheter manufacturers may also use this product in the future. Dr. Porterfield also discussed the possibility of future senior project groups using the model as a bench test for designing new catheter tips. The model will precisely simulate electrical behaviors of the heart in normal as well as arrhythmic conditions. Ideally, the model will …

Methods To Remotely Eliminate Biofilm From Medical Implants Using 2.4 Ghz Microwaves, Brett Glenn

Mechanical Engineering Undergraduate Honors Theses

Infections associated with biofilm growth are usually challenging to eradicate due to their high tolerance toward antibiotics [11, 12]. Biofilms often form on the inert surfaces of medically implanted devices [13]. No matter the sophistication, microbial infections can develop on all medical devices and tissue engineering constructs [12]. Related infections lead to 2 million cases annually in the U.S., costing the healthcare system over $5 billion in additional healthcare expenses [12].

Novel solutions to biofilm’s microbial colonization span the spectrum of engineering and science disciplines. Yet a practical solution still does not exist. The research presented here will explore a …

Modelling Palladium Decorated Graphene Using Density Functional Theory To Analyze Hydrogen Sensing Application, Sameer Kulkarni

Mechanical Engineering Undergraduate Honors Theses

Graphene is an exciting new material with many promising applications. One such application of graphene is gas sensing, when adsorbed with transition metals, notably Palladium. Therefore, it is of paramount importance to have appropriate ab initio calculations to calculate the various properties of graphene under different adsorbates and gasses. The first step in these calculations is to have a functioning base Density Functional Theory (DFT) model of pristine graphene decorated with Palladium. The computational methods described in this paper has yielded results for pristine graphene that have been confirmed many times in previous experimental and theoretical studies. Future work needs …

The Influence Of Heat Treatment On Corrosion Behavior Of Martensitic Stainless Steel Uns 42670, Armen Kvryan

Boise State University Theses and Dissertations

Ceaseless demand for lighter, faster, and more efficient aircraft has been one of the greatest driving forces behind bearing steel innovations. Recent studies demonstrate that corrosion is one of the leading causes of bearing failure in both military and commercial aircraft. High-performing bearing steels are available but are not being used in US military applications due to high cost and security issues when steels are produced outside of the continental United States. One approach to address this issue is to engineer steels that are cost-efficient and heat treated for corrosion resistance, long wear life, etc.

This dissertation presents information on …

Plasma Oxidation Of Liquid Precursors For Complex Metal Oxides., Babajide Patrick Ajayi

Electronic Theses and Dissertations

Clean energy production and storage are two of the most significant challenges in the 21^st century currently limited by the discovery and development of new and advanced materials. Complex oxides and alloys made using earth-abundant elements will play a crucial role in technology development moving forward, however, current preparation techniques are limited by their inability to produce complex oxides and alloys with precise composition control at fast timescales. A concept was proposed to produce mixed metal oxides with composition control through the oxidation of liquid precursors via plasma oxidation. It was hypothesized that the oxidation process can be completed …

Understanding The Effect Of Crystalline Structure And Atomic Arrangement In Metal Oxide Electrodes For Sodium Ion Batteries, Changjian Deng

Boise State University Theses and Dissertations

This dissertation investigates the fundamental understanding in the influences of order-disorder and atomic arrangement on electrochemical properties of electrode materials for sodium ion batteries (SIBs). In specific, TiO₂ anode and NaNi_xFe_yMn_xO₂ cathode materials are studied. Due to their low cost and relatively high abundance of raw materials SIBs are attractive for large-scale energy storage systems for high round trip efficiency and long cycle life. Recent studies suggest that various polymorphs of TiO₂ are suitable as anode material. However, the impact of crystallinity on the electrochemical properties of the material has not …

Additive Manufacturing Of High Performance Flexible Thermoelectric Generators Using Nanoparticle Inks, Tony Valayil Varghese

Boise State University Theses and Dissertations

Flexible thermoelectric devices are attractive power sources for the growing demand of flexible electronics and sensors. Thermoelectric generators have an advantage due to no moving parts, silent operation and constant power production with a thermal gradient.

Conventional thermoelectric devices are rigid and fabricated using complex and relatively costly manufacturing processes, presenting a barrier to increase the market share of this technology. To overcome such barriers, this work focuses on developing near ambient-temperature flexible thermoelectric generators using relatively low-cost additive manufacturing processes. A screen printable ink was developed for transforming nanoparticle ink into high-performance flexible thermoelectric generators with a peak thermoelectric …

The Development Of A Viscoelastic Ellipsoidal Model For Use In Measuring Plantar Tissue Material Properties During Walking, Jessica Lee Deberardinis

UNLV Theses, Dissertations, Professional Papers, and Capstones

Introduction: The mechanical characteristics of the plantar tissues during walking is not well understood as most of the current research focuses on testing specific plantar regions in cadavers or while the feet of the participants are raised. In this work, it is hypothesized that a viscoelastic geometric ellipsoid model used to assess multiple structures of the foot would be accurate and robust. This model would be participant-specific and applicable to the entire stance phase of gait.

Methods: The proposed viscoelastic ellipsoid model would represent several key anatomical areas: Heel, Posterior Midfoot, Anterior Midfoot, Metatarsals 1-2, Metatarsals 3-5, Toe 1, Toe …

Equation Of State Of H2o Ice Using Melt-Recrystallization, Zachary Michael Grande

UNLV Theses, Dissertations, Professional Papers, and Capstones

The recent surge in exoplanet discoveries due to advancements in astrophysical technology and analysis has brought the reliability of early equation of state measurements into question as they are the limiting factor when modeling composition of these planets. H2O content is among the most important for the search of habitable planets as well as in understanding planetary dynamics and atmosphere formation. Over the last three decades the equation of state of H2O has been investigated with various techniques but, has suffered from anisotropic strain and poor powder statistics resulting in a large discrepancy in equation of state fits. At pressures …

Cesium Platinum Iodide Perovskite Synthesis, Development And Application In Photovoltaic Devices, Dakota Schwartz

UNLV Theses, Dissertations, Professional Papers, and Capstones

Third generation photovoltaics, including perovskites, are essential to improving solar technology for widespread future use. Perovskite solar cells have surpassed 23.7% power conversion efficiency, comparable to traditional silicon photovoltaic panels. However, these perovskites are fabricated using lead-based compounds, posing toxicity issues. Furthermore, existing perovskites have limited thermal and moisture stability in ambient environments. In order to address toxicity and stability concerns, as well as to maximize photon absorption in solar cells through bandgap optimization, this effort focuses on the development of novel leadfree perovskite materials. A cesium platinum iodide composition is selected as a model system due to the theoretical …

Nanoparticle Doped Optical Fibers For High Energy Lasers, Amber L. Vargas

All Theses

Fabrication of rare earth (RE) doped optical fibers for use in fiber-based lasers and amplifiers is conventionally performed using a solution doping technique where RE salts (i.e., ErCl3) are dissolved in a solvent, introduced into the porous silica soot, dried and consolidated to form the active fiber core. This process does not allow for tailoring of the chemical environment about the RE. Alternatively, nanoparticle (NP) doping is more recent approach to incorporating rare earths into an optical fiber and have been shown to permit modification of the chemical environment around the RE in ways the enhance spectroscopic performance. This is …

Open Source Completely 3-D Printable Centrifuge, Salil S. Sule, Aliaksei Petsiuk, Joshua M. Pearce

Michigan Tech Publications, Part 1

Centrifuges are commonly required devices in medical diagnostics facilities as well as scientific laboratories. Although there are commercial and open source centrifuges, the costs of the former and the required electricity to operate the latter limit accessibility in resource-constrained settings. There is a need for low-cost, human-powered, verified, and reliable lab-scale centrifuges. This study provides the designs for a low-cost 100% 3-D printed centrifuge, which can be fabricated on any low-cost RepRap-class (self-replicating rapid prototyper) fused filament fabrication (FFF)- or fused particle fabrication (FPF)-based 3-D printer. In addition, validation procedures are provided using a web camera and free and open …

Optical Enhancement In Periodic Plasmonic Gratings For Sers And Metal-Semiconductor-Metal Photodetectors (Msm-Pds) Applications, Ahmad Aziz Darweesh

Graduate Theses and Dissertations

This dissertation is aimed to numerically study the effect of plasmonic grating electrodes on the efficiency of metal-semiconductor-metal photodetectors (MSM PDs) and the sensitivity of Surface Enhanced Raman Spectroscopy (SERS). This research can benefit many areas of nanoscience and optics, including plasmonic applications, such as, super lenses, nano-scale optical circuits, optical filters, surface plasmon enhanced photo-detectors solar cells, imaging sensors, charge-coupled devices (CCD), and optical-fiber communication systems. Several parameters, wire widths and thickness, gap space, taper angle, and the incident wavelength and angle, were investigated. The goal of this research is to utilize the plasmonic phenomenon by using plasmonic gratings …

A Silicon Germanium Cmos Linear Voltage Regulator For Wireless Agricultural Applications, Aminta Naidili Castillo Robles

Graduate Theses and Dissertations

This thesis presents the design, simulation and test results of a silicon germanium (SiGe) complementary metal-oxide-semiconductor (CMOS) linear regulator. The objective of the circuit is to power other analog devices regardless of the load current and input voltage changes. The application of this regulator is to be part of a project developing a miniaturized semiconductor platform that can be inserted into stems of crops in order to measure data inside the plant and then send it wirelessly to the user. The linear regulator was designed on a BiCMOS SiGe 0.13µm which is a GlobalFoundries process. It has been tested at …