Materials Science and Engineering Commons^™

Experimental And Theoretical Evaluation Of The Effect Of Panel Geometry On The Failure Of Corrugated Board Panel, Takashi Takayama, Katsuhiko Saito, Akira Higashiyama

Journal of Applied Packaging Research

McKee’s formula is widely used to predict the compression strength (CS) of corrugated boxes and panels. It can accurately estimate the compression strength of boxes that are within a practical size range, but recently, larger and smaller corrugated boxes than before have been extensively developed. Therefore, there is a need for a CS prediction formula that works beyond the application range of McKee’s formula. Recent researches consider the failure mode as a combination of collapsing and buckling failure and remove the constraints and the assumptions associated with McKee’s formula. This makes it possible to more accurately estimate the CS of …

6th Ic4n Book Of Abstracts, Efstathios Meletis, Constantin Politis, Wolfram Schommers, Nikolaos Kanellopoulos

International Conference from Nanoparticles and Nanomaterials to Nanodevices and Nanosystems - Archive

IC4N is a highly interdisciplinary conference focusing on all aspects of nanoscience and nanotechnology addressing global problems in energy, environment and human health. As in previous editions of this highly popular conference series, the overarching goal is to combine a high quality of scientific dialogue with a relaxing environment. This is a unique opportunity for both senior and junior researchers to meet, interact, and stimulate collaborations on a global scale. A number of Plenary, Keynote and invited lectures are planned by renowned scientists from all over the world, making IC4N an international nano forum of the highest quality.

Proceedings published …

Encapsulation Of Organic Thermochromic Materials With Silicon Dioxide, Mingyang Huang

USF Tampa Graduate Theses and Dissertations

Currently, functional materials are attracting considerable attention in the effort to solve some tough challenges the world is faced with. Thermochromic (TC) materials have the potential to make buildings more energy efficient because of their ability to change color (i.e black to white) at specific temperatures. Using this property, TC materials can reflect solar radiation in the summer, to keep a building cool during daytime hours, and absorb solar radiation in the winter to keep the building warm when their color is dark. Very often, to increase their durability, thermochromic materials are encapsulated. In this work, a new process has …

Method Of Development And Use Of Catalyst-Functionalized Catalytic Particles To Increase The Mass Transfer Rate Of Solvents Used In Acid Gas Cleanup, Leland R. Widger, Cameron A. Lippert, Kunlei Liu

Center for Applied Energy Research Faculty Patents

The present invention relates to methods for improving carbon capture using entrained catalytic-particles within an amine solvent. The particles are functionalized and appended with a CO₂ hydration catalyst to enhance the kinetics of CO₂ hydration and improve overall mass transfer of CO₂ from an acid gas.

Lessons Learned About Building An Assertive Community, Donna C. Llewellyn, William L. Hughes, Megan F. Gambs

Materials Science and Engineering Faculty Publications and Presentations

One of our observations in this lessons learned paper is that there is underwhelming faculty development related to scholarship other than on how to submit and sometimes how to write proposals. This de facto service model misses everything outside of the proposal-writing process; which is the least important, but is often the most celebrated, rewarded, and supported phase. Inspired by national Centers for Teaching & Learning, and modeled after the emerging Communities of Transformation literature, we are piloting a Center for Transformative Research at Boise State University. The vision of our Center is to build and sustain an ASSERTive community …

Voices Of Our Students: Using Evidence-Based Methods To Inform A Multidisciplinary Engineering Program Design, Vicki Stieha, Noah Salzman, Amy J. Moll

Materials Science and Engineering Faculty Publications and Presentations

Listening carefully to our students and integrating the variables that matter to them is a step that we can take to increase the number of women and underrepresented minority graduates in engineering. This paper shares an evaluative case study as we report findings from data gathering tools guiding our continuous improvement process. The findings illuminate students’ perceptions of their engineering design course and curriculum. We conclude by discussing the pedagogical decisions the teaching team is making as a result of listening to our students’ voices.

Permeability Of Oxygen And Carbon Dioxide Through Pinholes In Barrier Coatings, Petri Johansson, Johanna Lahti, Jorma Vihinen, Jurkka Kuusipalo

Journal of Applied Packaging Research

Abstract

Packaging materials are typically made of multilayer structures combining polymers, metals and inorganic materials. Multilayer structures are selected in order to optimize the thickness and performance in packaging applications. Atomic layer deposited (ALD) aluminium oxide (Al₂O₃) layer provides good barrier properties against oxygen and carbon dioxide gases i.e. permeation of gases through ALD coated polymer films will reduce remarkably. The target was to study the effect of pinholes on the oxygen and carbon dioxide permeability of ALD coated extrusion-coated packaging paper. Pinholes were artificially generated by ultra violet (UV) laser drilling through the polymer layer …

Composite Membranes Derived From Cellulose And Lignin Sulfonate For Selective Separations And Antifouling Aspects, Andrew Steven Colburn, Ronald J. Vogler, Aum Patel, Mariah Bezold, John D. Craven, Chunqing Liu, Dibakar Bhattacharyya

Chemical and Materials Engineering Faculty Publications

Cellulose-based membrane materials allow for separations in both aqueous solutions and organic solvents. The addition of nanocomposites into cellulose structure is facilitated through steric interaction and strong hydrogen bonding with the hydroxy groups present within cellulose. An ionic liquid, 1-ethyl-3-methylimidazolium acetate, was used as a solvent for microcrystalline cellulose to incorporate graphene oxide quantum dots into cellulose membranes. In this work, other composite materials such as, iron oxide nanoparticles, polyacrylic acid, and lignin sulfonate have all been uniformly incorporated into cellulose membranes utilizing ionic liquid cosolvents. Integration of iron into cellulose membranes resulted in high selectivity (> 99%) of neutral …

Optimization Of Induction Quenching Processes For Hss Roll Based On Mmpt Model, Ligang Liu, Hui Yu, Zhiqiang Yang, Chunmei Zhao, Tongguang Zhai

Chemical and Materials Engineering Faculty Publications

To improve the comprehensive performance of high speed steel (HSS) cold rolls, the induction hardening processes were analyzed by numerical simulation and experimental research. Firstly, a modified martensitic phase transformation (MMPT) model of the tested steel under stress constraints was established. Then, the MMPT model was fed into DEFORM to simulate the induction quenching processes of working rolls based on an orthogonal test design and the optimal dual frequency of the induction quenching process was obtained. The results indicate that the depth of the roll’s hardened layer increases by 32.5% and the axial residual tensile stress also becomes acceptable under …

Synthesis Of Metal Oxide Surfaces And Interfaces With Crystallographic Control Using Solid-Liquid-Vapor Etching And Vapor-Liquid-Solid Growth, Beth S. Guiton, Lei Yu

Chemistry Faculty Patents

The present invention provides integrated nanostructures comprising a single-crystalline matrix of a material A containing aligned, single-crystalline nanowires of a material B, with well-defined crystallographic interfaces are disclosed. The nanocomposite is fabricated by utilizing metal nanodroplets in two subsequent catalytic steps: solid-liquid-vapor etching, followed by vapor-liquid-solid growth. The first etching step produces pores, or “negative nanowires” within a single-crystalline matrix, which share a unique crystallographic direction, and are therefore aligned with respect to one another. Further, since they are contained within a single, crystalline, matrix, their size and spacing can be controlled by their interacting strain fields, and the array …

Erosion Resistance Of Tungsten-Carbide Coatings For Steel Pipes In Fluid Catalytic Cracking Units, Davis Vannasing, Jennifer Hulfachor

Materials Engineering

In petroleum processing, the flow of catalyst readily leads to erosion of piping in a fluid catalytic cracking unit. Advances in coating materials and processes necessitate a re-evaluation of current protection methods. Commercially available tungsten-carbide (WC) claddings and nanostructured WC-W CVD coatings were investigated as potential alternative erosion-resistant coatings. Erosion tests by solid particle impingement were conducted on 2 variations of claddings and 1 variation of WC-W coatings following ASTM standard G76. A36 steel coupons were used as reference samples. For statistical validation, 2-3 replications of the tests were performed for the claddings and WC-W coating. Testing was conducted using …

Implementation Of Multivariate Artificial Neural Networks Coupled With Genetic Algorithms For The Multi-Objective Property Prediction And Optimization Of Emulsion Polymers, David Chisholm

Master's Theses

Machine learning has been gaining popularity over the past few decades as computers have become more advanced. On a fundamental level, machine learning consists of the use of computerized statistical methods to analyze data and discover trends that may not have been obvious or otherwise observable previously. These trends can then be used to make predictions on new data and explore entirely new design spaces. Methods vary from simple linear regression to highly complex neural networks, but the end goal is similar. The application of these methods to material property prediction and new material discovery has been of high interest …

Processing Of Aluminum Foam Using A Double Replication Process, Luc Salvo, Sevara Mukhtarova

Acta of Turin Polytechnic University in Tashkent

The purpose of this paper is to look at the impact of small morphological variations on kinetic storage of infiltrated open-cell foams. For this a new production process was studied, and a general description of the process and its variants are given.

Compositional Optimization Of Amyloid-Graphene Oxide Nanohybrids For Biomaterials, Claire L. Drewery

Materials Engineering

Amyloid nanofibrils are natural materials capable of self-assembling into precise structures with tunable functionalities, while exhibiting excellent mechanical properties. In combination with highly conductive graphene oxide (GO), the 1-D amyloid nanofibrils and 2-D nanosheets of GO can produce a robust and bio-functional nanohybrid, hypothesized to exhibit multi-domain functional properties useful for enzyme sensing, water purification, drug delivery, and tissue scaffolding applications. Here, we examine the properties of an amyloid-graphene oxide nanohybrid film made with amyloids derived from hen egg white lysozymes in an attempt to explore the diverse toolbox of amyloid derivatives and establish ideal fabrication methods and formulations of …

Surface Engineering Of Annealed High Entropy Alloys Towards Thermodynamically Stable, Anti-Oxidation, Solar Selective Absorbers, Sheppard R. Somers

ENGS 88 Honors Thesis (AB Students)

Concentrating solar power (CSP) systems require receivers that maintain their physical properties at the high operating temperature and are absorbent. The high entropy alloy Fe28.2Ni18.8Mn32.9Al14.1Cr6 (HEA) investigated in this thesis fills these needs by harnessing the HEA’s oxidation process to create a selective solar absorbing layer that grows at a parabolic rate at CSP operating temperatures. Results of this research demonstrate that annealing processes of HEA can yield over 90% solar thermal efficiency by engineering the surface oxidation to be both physically and optically optimized for absorption.

Nano-Enhanced Composite Membranes For Water Desalination, Benjamin Fredrik Victor Sundling Von Fürstenrecht

Materials Engineering

In theory single walled carbon nanotubes (SWCNT) will aid in ion rejection due hydrophobicity and smoothness of the SWCNT. An efficient means of water desalination utilizing SWCNT in a membrane seems plausible. A lyotropic liquid crystal (LLC) solution was made with a synthesized polymerizable surfactant methacryloxy ethyl hexadecyl dimethyl ammonium bromide (C16MA) to help with vertical alignment of SWCNT. Due to SWCNT lack of solubility and tendency to agglomerate in water, a dispersion performed using an inert surfactant centrimonium bromide (CTAB) to make sure that the SWCNT were homogeneously dispersed in the solution without altering the hexagonal packing factor of …

Investigation Of Copper Infiltration Alloys For Use In Metal Matrix Composite Drill Bits, Samuel J. Stueland, Timothy P. Markiewicz

Materials Engineering

A newly developed copper-based alloy, P98-X1 was tested for compressive strength to predict qualitative performance compared to MF53, F-Bronze, CuNiSn, and CuMnNi for use as the infiltration alloy in metal matrix composite (MMC) drill bits. Ingots of each alloy were cast using an arc furnace and cut into compression testing samples using wire electrical discharge machining (EDM). The alloys were selected for testing based on solid solution strengthening coefficient and melting point. Five of each alloy were compression tested to determine yield strength of the infiltration alloy. Yield strength was determined using a 0.002mm displacement offset from the linear elastic …

Rotating Beam Fatigue Of Forged 2219-T852 Aluminum Alloy, Julio Escamilla, Madison Reed

Materials Engineering

2219 aluminum has been used extensively in aerospace applications due to its ability to retain strength in large section thicknesses, thus making it ideal for large forgings. However, the Metallic Materials Properties Development and Standardization (MMPDS) handbook, a source of design data for aerospace industry applications, lacks information on 2219 in the T852 condition, particularly concerning the behavior of the alloy under cyclic loading conditions. Data was collected for forgings of 2219-T852 aluminum as produced by Weber Metals to determine the fatigue life of the alloy-temper combination and to assess the effects of forge thickness and orientation on fatigue life. …

Effects Of Heat Treatment On The Dimensional Stability And Mechanical Properties Of Guadua Bamboo, Kade Schmitz, Skye Dascher, Shalto Dascher

Materials Engineering

Contributing to about 4% of particulate emissions, the construction industry is one of the largest polluters of the environment. In an effort to reduce emissions, BamCore has produced a dual panel wall system made of Guadua bamboo with a Douglas fir veneer. Bamboo is a highly renewable material with a fast growth rate and carbon sequestration abilities. This project investigates how heat treating Guadua bamboo influences its dimensional changes and mechanical properties for building applications. It was found that a dimensional increase in every direction occurred for all samples when exposed to higher relative humidity (50% to 90%), and that …

A Study And Simulation Of Flux Induced Corrosion In Copper Tubing Used For The Distribution Of Potable Water, Daniel O. Benham

Materials Engineering

Water side corrosion within copper plumbing can occur due to a wide variety of unwanted circumstances. Through the controlled immersion of six ¾” copper tubing samples with five utilizing a unique industry standard soldering flux, this investigation associates residual flux deposits with the initiation of pitting in copper. Water stagnation in a copper potable water distribution system, typically associated with an infrequently used faucet, is a condition highly prone to copper pitting. A test apparatus designed to produce a partially stagnant flow condition with scheduled electrolyte flushes every 3 days was developed and constructed to contain 6 test samples for …

The Impact Of Preheat On 2205 Duplex Stainless Steel Welds, Angelee G. Q. Breuninger, Iris I. Li, Cristian V. Sion

Materials Engineering

The goal of this project is to determine the relationship between preheat temperature and phase balance of austenite and ferrite in the heat affected zone (HAZ) of a dissimilar thickness weld made of Sandvik SAF 2205 duplex stainless steel (DSS). Various preheat temperatures were applied (no preheat, 63°C, 98 °C, 141 °C, 181 °C, and 214 °C) to a 2-inch thick plate that was welded to a 0.072-inch thin sheet, with a 0.125-inch standoff, using manual gas tungsten arc welding (GTAW). Welding variables (voltage, amperage, and travel speed) were recorded and thermocouples were placed along the backside of the weld, …

Investigation Of The Encapsulation Efficiency Of Hexanal In Y-Cyclodextrin Metal Organic Frameworks, Travis J. Lang

Materials Engineering

Nanoporous materials have been extensively studied for applications such as drug delivery and organic compound storage. The nanoporous material of this study is a metal organic framework (MOF) which is a coordination of metal ions with organic binders. The structure created by this coordination can be used to absorb organic compounds, such as plant growth regulators, and subsequently release the organic compounds over a prolonged period to extend the storage life of foods. This study is examining the encapsulation efficiency of hexanal in γ-cyclodextrin metal organic frameworks (γ-CDMOFs) as a mechanism for potential active packaging applications. γ-CDMOFs were synthesized by …

Moisture Characterization Of Thermoplastics And Thermosets For Use As Matrices In Fiber Reinforced Composites, Kieran Hook, Ray Hsu

Materials Engineering

Epoxy matrix composites are widely used in aerospace industry for lighter aircraft while thermoplastic-matrix composites have traditionally been underutilized despite their excellent fracture resistance, impact strength, and the ability to be recycled. Toray Advanced Composites (Morgan Hill, CA) wants to investigate the structural integrity of thermoplastic matrices in common aircraft operating environments. An experiment was conducted to observe the effect of moisture absorption on thermoplastic composites’ mechanical strength. PEEK, PPS, and PEI matrices were compared to an epoxy matrix in this experiment. Samples were submerged in 160ºF distilled water to accelerate moisture absorption. For two months, the changes in mass …

Microstructural Transformation Of Cold-Sprayed Grcop-42 For Rocket Engine Combustion Chamber Liners, Mason Souther

Materials Engineering

Rocket engines have always relied on high-conductivity copper liners to protect structural components from extreme thermal loads produced by combustion. Forged NARloy-Z has been the material of choice for decades but increasing cost of its constituent silver and high waste in the machining process has reduced the alloy’s cost effectiveness. Aerojet Rocketdyne wants to determine the viability of cold-spray additively manufactured GRCop-42 as a replacement alloy to reduce liner cost. Screening tests were performed to observe the microstructural development and microhardness changes of cold-sprayed GRCop-42 after being subjected to multiple stages of the typical heat treatment of a combustion chamber …

Weld Fracture Between C450 Stainless And C300 Maraging Steels In Golf Club Heads, Emily Oreste, Shea Costner

Materials Engineering

This project studied fractures along the weld on the face of TaylorMade metalwood golf clubs. The weld joint investigated was between investment cast C450 stainless steel and hot rolled C300 maraging steel that had been joined by plasma arc welding (PAW). Cracking in the welds between these two metals was discovered during in-house prototype testing. To understand the differences between the clubs with intact weld joints and clubs with fractured weld joints, the microstructures throughout the weld zones were imaged and a grid of microhardness values of the entire sample cross-section was generated. The images and hardness values were analyzed …

Investment Cast C450 Microstructural Characterization In Golf Club Heads, Kenneth Yin-Fai Lau

Materials Engineering

Two types of tensile bars were observed in this study of golf iron heads for TaylorMade Golf. As-cast and as-cast then machined tensile bars. The tensile bars underwent tensile tests to observe tensile strength, percent elongation, and fracture mechanisms. Furthermore, the hardness of the tensile bars was also taken despite seeing no difference in sample types. However, the as-cast samples did not consistently meet the requirements of percent elongation > 10.00% as there was a sample with 0.00% and another with 1.26%. These samples also showed brittle fracture, instead of the desired cup-and- cone ductile fracture. To investigate further, transverse sections …

Minimizing The Dimensional Change In Two Component Epoxy Based Thermoset Adhesives Through Adapting Mix Ratio And Initial Crosslink Density, Jefferson Peter Norman

Materials Engineering

Meissner Filtration uses amine-hardened epoxy as a high-performance adhesive to encapsulate hollow fiber membranes at the ends of rigid filter housings. Dimensional change of the epoxy while curing can result in residual stress formation that is detrimental to the manufacturing of the filter and causes structural integrity issues when the filter is used in industrial processes where heating and cooling cycles are implemented. The residual stresses can cause cracks, microscopic fractures, and delamination from the housing, resulting in failure of the filter. The goal of this project was to evaluate how changes in processing conditions could minimize dimensional variability due …

Non-Toxic Soil Thickeners For Reducing Mudslide Intensity, Miranda Miao, Isaac Blackburn, Erika Haley Yao

Materials Engineering

Non-toxic food thickeners were investigated as a solution for thickening mud to mitigate the effects of mudslides. All soil was obtained from a site on the California Polytechnic State University campus where a mudslide occurred in 2017. Guar gum was mixed into the soil at 1 wt% and 10 wt% of the moisture content in the soil. Whey protein was mixed into the soil at 2 wt% and 19 wt% of the moisture content in the soil. The soils’ liquid limit was found using the Casagrande cup testing method. Liquid limit testing indicated that thickeners raised the liquid limit, most …

Mechanical Tear Testing And Failure Analysis Of Armordillo® Textile For Future Comparison With Next Generation Replacement Textiles, Jordan Bryce Pohl

Materials Engineering

ArmorDillo^® is a heavy-duty, waterproof textile designed to protect valuable equipment against outdoor elements such as rain, dirt, salt, ultraviolet rays, and damage from other external factors that is manufactured by Transhield^® USA and is currently in service with many branches of the United States Armed Forces, primarily the United States NAVY. Due to emerging security threats to classified military hardware the US NAVY through the United States Naval Surface Warfare Center (NSWC) is actively researching and sourcing a textile replacement for ArmorDillo^® to meet these threats. This study investigates the mechanical durability of ArmorDillo^® under …

Evaluation Of Tensile Properties For Selective Laser Melted 316l Stainless Steel And The Influence Of Inherent Process Features, Paul Swartz

Master's Theses

Optimal print parameters for additively manufacturing 316L stainless steel using selective laser melting (SLM) at Cal Poly had previously been identified. In order to further support the viability of the current settings, tensile material characteristics were needed. Furthermore, reliable performance of the as-printed material had to be demonstrated. Any influence on the static performance of parts in the as-printed condition inherent to the SLM manufacturing process itself needed to be identified. Tensile testing was conducted to determine the properties of material in the as-printed condition. So as to have confidence in the experimental results, other investigations were also conducted to …