Materials Science and Engineering Commons^™

A Study Of Copper And Aluminum Incorporated Chromium Oxide Core-Shell Magnetic Nanoparticles, Tamzid Ibn Minhaj

Graduate Theses/Dissertations

The structural and magnetic properties of copper (Cu) and aluminum (Al) -incorporated chromium oxide (α-Cr₂O₃, i.e., chromia) inverted core-shell nanoparticles (CSNs) were investigated. The objectives of this study were to determine the role of the substituting (for chromium, Cr) element and of Cu concentration on governing the magnetic properties of the CSNs. For synthesis of the CSNs, α-Cr₂O₃ nanoparticles were first grown using microwave assisted synthesis whereupon a hydrothermal nanophase epitaxy (HNE) method was used to incorporate Cu or Al in the chromia-based shell of the nanoparticles. The morphology, structure and size characteristics …

Study Of Multiferroic Properties Of Ferroelectric- Ferromagnetic Heterostructures Bzt-Bct/Lsmo, Md Abdullah-Al Mamun

Graduate Theses/Dissertations

Currently, there has been a flurry of research focused on multiferroic materials due to their potential applications. Lead (Pb)-based ferroelectric and multiferroic materials (PZT, PMN-PT, PZN-PT etc.) have been widely used for sensors, actuators, and electro-mechanical applications due to their excellent dielectric and piezoelectric properties. However, these materials are facing global restriction due to the toxicity of Pb. In this thesis, multiferroic properties of ferroelectric-ferromagnetic heterostructures consist of Pb-free perovskite oxides 0.5Ba(Zr_0.2Ti_0.8)O₃-0.5 (Ba_0.7 Ca_0.3)TiO₃ (BZT-BCT) and La_0.7Sr_0.3MnO₃ (LSMO) have been studied. The heterostructures BZT-BCT/LSMO were …

Dft Study On The Li Mobility In Li-Ion-Based Solid-State Electrolytes, Shafiqul Islam

Graduate Theses/Dissertations

I have investigated the diffusion mechanisms of Li-ion in amorphous lithium phosphite (LiPO₃) with addition of sulphur. By applying the nudge elastic band (NEB) method in crystal LiPO₃ and Li₃PO₄, I confirmed the easing of diffusion pathways for Li ion in LiPO₃ which is consistent with the previous theoretical finding[1]. From the diffusion study in 0.5 Li₂O- 0.5 P₂O₅ and 0.4 Li₂SO₄ – 0.6 (Li₂O-P₂O₅) melts above 3000K performed with ab-initio molecular dynamics (AIMD), produces identical outcome as …

Anisotropic Character Of Low-Order Turbulent Flow Descriptions Through The Proper Orthogonal Decomposition, Nicholas Hamilton, Murat Tutkun, Raúl Bayoán Cal

Mechanical and Materials Engineering Faculty Publications and Presentations

Proper orthogonal decomposition (POD) is applied to distinct data sets in order to characterize the propagation of error arising from basis truncation in the description of turbulence. Experimental data from stereo particle image velocimetry measurements in a wind turbine array and direct numerical simulation data from a fully developed channel flow are used to illustrate dependence of the anisotropy tensor invariants as a function of POD modes used in low-order descriptions. In all cases, ensembles of snapshots illuminate a variety of anisotropic states of turbulence. In the near wake of a model wind turbine, the turbulence field reflects the periodic …

Fifty-Plus-Year Postflight Analysis Of First Fluid Experiment Aboard A Spacecraft, Mark M. Weislogel, Yongkang Chen, William J. Masica, Fred J. Kohl, Robert D. Green

Mechanical and Materials Engineering Faculty Publications and Presentations

This year marks the 55th anniversary of the first fluid physics experiment performed aboard a spacecraft during the Mercury-Atlas 7 mission. Since then, NASA has conducted over 80 fluids physics experiments aboard a variety of spacecraft, many of which have enhanced the understanding of large-length-scale capillary phenomena relevant to liquid management in the weightless state. As both celebration and demonstration, the Mercury-Atlas 7 fluids experiment is revisited in light of the current understanding of large-length-scale capillary fluidics. Employing a modern numerical tool, a rich variety of experimental outcomes are discovered that were not observed during the flight experiment. Interestingly, experimental …

The Effects Of Carboxylic Acids In Aluminum Anodizing, Abby E. Koczera

Honors Theses and Capstones

Hard-anodized alumina coatings were formed in sulfuric acid at low temperature and high current density in the presence of carboxylic acid additives. Citric acid, trimesic acid, mellitic acid and ethylenediaminetetraacetic acid (EDTA) were utilized in varying concentrations. The additives were chosen for their capacity to form complexes with tri-valent aluminum and hence impart chemical stability to the coatings. The coatings were sealed in boiling water, and corrosion resistance was observed in a high pH solution of potassium hydroxide. The coatings were examined using scanning electron microscopy (SEM) to assess coating thickness and pore dimensions. Thicker coatings were produced when the …

Comprehensive Finite Element Modeling Of Ti-6al-4v Cellular Solids Fabricated By Electron Beam Melting, Edel Arrieta

Open Access Theses & Dissertations

Additive manufacturing permits the fabrication of cellular metals which are materials that can be highly customizable and possess multiple and extraordinary properties such as damage tolerance, metamorphic and auxetic behaviors, and high specific stiffness. This makes them the subject of interest for innovative applications. With interest in these materials for energy absorption applications, this work presents the development of nonlinear finite element models in commercial software platforms (MSC Patran/Nastran) that permit the analysis of the deformation mechanisms of these materials under compressive loads. In the development of these models, a detailed multiscale study on the different factors affecting the response …

Dft Study Of Adsorption Of Trimetallic Endohedral Fullerenes On Graphene, Nakul Nitin Karle

Open Access Theses & Dissertations

A density functional theory (DFT) study on the geometric and electronic structure of C60 and Sc3N@C80 along with their adsorption on pristine single layer graphene (SLG) is presented. C60 is found to adsorb in two nearly degenerate configurations: (i) with a pentagon facing the SLG, which is the most stable one, and (ii) with a hexagon facing the SLG in a face-to-face perfect alignment, rarely common in Ï?â??Ï? interactions, 0.06 eV higher in energy. The calculated binding energy of 0.76 eV, which includes dispersion effects, is in good agreement with previous theoretical and experimental reports. On the contrary, Sc3N@C80 adsorption …

Organic-Inorganic Graphite And Transition Metal Dichalcogenide Based Composites For 3d Printing, Jorge Alfredo Catalan Gonzalez

Open Access Theses & Dissertations

This project was multipronged to help fuse together topics of additive manufacturing and two-dimensional (2D) layered materials, and studying the mechanical and electrical properties of the composites produced. The composites are made from the thermoplastic polymer acting as a matrix and the graphite and 2D transition metal dichalcogenides (TMDs) serving as the filler or reinforcement. Different concentrations of TMD's were added to the matrix to study the effect of composition on the mechanical and electrical properties. To shed insights into the mechanical properties, test coupons were produced as "dog bone" structures for tensile testing using the ASTM D638 type 5 …

Methods For Producing Graphene From Petroleum By-Products, Eva M. Deemer

Open Access Theses & Dissertations

N/A

On Demand 3d Printed Hybrid Scaffolds For Tissue Engineering Applications, Ivan D. Hernandez

Open Access Theses & Dissertations

A composite 3D printed polymer scaffold with inbuilt porosity and filled with a hydrogel can provide an ideal support system for cell growth, proliferation, and vascularization. Therefore, a hybrid system of 3D printed polycaprolactone (PCL) scaffold and a hydroxyapatite-based hydrogel was developed for application in the reconstruction of bone defects, which are inherently difficult to repair without any guided therapies. In the present study, a 3D printed gyroid structure of PCL allowed the loading of a higher amount of hydrogel as compared to conventionally used 3D printed mesh structure of the same volume and strut thickness. The hydrogel was composed …

Ac Susceptibility And Epr Investigations Of Superspin Dynamics In Manganese Oxide Nanoparticles, Mahesh Koirala

Open Access Theses & Dissertations

We have investigated the superspin dynamics of 5 nm and 10 nm mixed state Mn3O4 nanoparticles utilizing ac-susceptibility and electron paramagnetic resonance measurements. The out of phase component of the ac-susceptibility measurements show a magnetic anomaly below (T

Protonic Conductors For Intermediate Temperature Fuel Cell Electrolytes: Superprotonic Csh2po4 Stabilization And In-Doped Snp2o7 Structure Study, Heber Jair Martinez Salinas

Open Access Theses & Dissertations

Proton conductor solid electrolytes CsH2PO4 and In-doped tin pyrophosphate have been investigated as candidates to fill a gap of suitable electrolytes for fuel cells at the intermediate temperature range due their unusually high conductivities between 200 and 300 °C. Unfortunately, in the case of CsH2PO4, complicated experimental conditions, like a humidified environment, or high pressure, are needed to preserve the sought high conducting phase.

In the first stage of this work, X-ray diffraction on CsH2PO 4 samples performed in air, and under normal conditions of humidity and pressure, evidence of the cubic phase of CsH2PO4 was observed during short intervals …

Structural And Mechanical Characterization Of Nanocrystalline Tungsten And Tungsten-Based Alloy Thin Films For Extreme Environment Applications, Gustavo Martinez

Open Access Theses & Dissertations

Extreme environments associated with nuclear applications often results in degradation of the physical, mechanical and thermo-mechanical properties of the materials. Tungsten (W) exhibits unique physical and mechanical properties, which makes tungsten a good candidate for nuclear applications; however, intrinsic W exhibits low fracture toughness at all temperatures in addition to a high ductile to brittle transition. In the present work, nanocrystalline W, W-Y and W-Mo alloys were nanoengineered for nuclear applications. Nanocrystalline tungsten coatings with a thickness of ~1 µm were deposited onto Silicon (100) and Sapphire (C-plane) using RF and DC sputtering techniques under various growth conditions. Yttrium content …

Impact Of Clip Connection And Insulation Thickness On Bracing Of Purlins In Standing Seam Roof Systems, Michael W. Seek, Daniel Mclaughlin

Engineering Technology Faculty Publications

The flexural strength of purlins in standing seam roof systems is highly dependent upon the extent to which the sheathing provides lateral and torsional restraint. Typical models to predict the restraint provided by the sheathing assume that the plane of lateral resistance occurs at the top flange of the purlin. In reality, depending on the configuration of the clip and the amount of insulation located between the purlin and the clip, the plane of lateral resistance and corresponding center of rotation shifts above the top flange. This distance, referred to as the effective standoff, is important to evaluate the effectiveness …