Materials Science and Engineering Commons^™

Cermet Development For High Temperature And High Pressure Applications, Beatriz Justus Ferez, Samantha Guthrie, Brian J. Jaques (Mentor), Darryl P. Butt (Mentor)

Idaho Conference on Undergraduate Research

Many traditionally used low cost alloys are easily corroded in steam or supercritical CO₂. An effective solution is to utilize ceramic heat exchangers that are often integrated with metallic components which result in a significant thermal expansion mismatch. The goal of this project is to develop a sealing method to create a hermetic joint between the ceramic and metal alloy. Proposed is a seal ring containing a cermet powder with a coefficient of thermal expansion (CTE) higher than the ceramic and metal to produce a high temperature compressive seal. Cermets of Ag and MgO have been selected to …

Computational Studies Of Grain Boundary Behavior In Uranium Dioxide Nuclear Fuels, Eric Nelson, Lan Li (Mentor), Simon C. Middleburgh (Mentor)

Idaho Conference on Undergraduate Research

Nuclear power is responsible for the production of 380,000 Megawatts of energy worldwide, which results in over 11% of the world’s energy production [world-nuclear.org]. Pellet-cladding interactions (PCI) are a key nuclear fuel failure mechanism which presents formidable challenges to researchers due to extreme nuclear fission conditions. Although PCI interactions have been reduced due to fuel additives, understandings of PCI interactions remain elusive. We propose new approaches to increase understanding of nuclear fuel interactions; specifically, uranium dioxide and the effects of dopants. This study focuses on amorphous uranium dioxide and fission products, while benchmarking new methods with previous computational studies. Results …

Verifying The Implementation Of An Anisotropic Grain Boundary Energy Model In Idaho National Lab’S Marmot, John-Michael H. Bradley, Evan D. Hansen, Jarin C. French, Yongfeng Zhang (Mentor)

Idaho Conference on Undergraduate Research

This work aims to verify the correct implementation of an anisotropic grain boundary (GB) energy model for face-centered cubic (FCC) and fluorite materials in Idaho National Laboratory’s phase field fuel performance code MARMOT. The model was recently implemented in MARMOT with the purpose of enabling higher fidelity simulations of UO₂ nuclear fuels. As part of verification, tests were performed to measure the energy dependence on misorientation of high symmetry GBs in an FCC metal (Cu). The energies of the [100], [110], and [111] twist boundaries result as predicted, as do the energies of the [111] symmetric tilt boundaries. However, …

Column-Grid-Array (Cga) Versus Ball-Grid-Array (Bga): Boardlevel Drop Test And The Expected Dynamic Stress In The Solder Material, Ephraim Suhir, Reza Ghaffarian

Mechanical and Materials Engineering Faculty Publications and Presentations

Board level drop test is considered with an objective to develop a physically meaningful analytical predictive model for the evaluation of the expected impactinduced dynamic stresses in the solder material. Ball-gridarray (BGA) and column-grid-array (CGA) designs are addressed. Intuitively it is felt that while the application of the CGA technology to relieve thermal stresses in the solder material might be quite effective (owing to the greater interfacial compliance of the CGA in comparison with the BGA), the situation might be quite different when the PCB/package experiences dynamic loading. This is because the mass of the CGA joints exceeds considerably that …

Open Source Laser Polymer Welding System: Design And Characterization Of Linear Low-Density Polyethylene Multilayer Welds, John Laureto, Serguei V. Dessiatoun, Michael M. Ohadi, Joshua M. Pearce

Department of Materials Science and Engineering Publications

The use of lasers to weld polymer sheets provides a means of highly-adaptive and custom additive manufacturing for a wide array of industrial, medical, and end user/consumer applications. This paper provides an open source design for a laser polymer welding system, which can be fabricated with low-cost fused filament fabrication and off-the-shelf mechanical and electrical parts. The system is controlled with free and open source software and firmware. The operation of the machine is validated and the performance of the system is quantified for the mechanical properties (peak load) and weld width of linear low density polyethylene (LLDPE) lap welds …

A Comparison Of Microstructure And Uniaxial Compressive Response Of Ice-Templated Porous Alumina Scaffolds Fabricated From Two Different Particle Sizes, Nikhil D. Dhavale

Mechanical & Aerospace Engineering Theses & Dissertations

Development of bio-inspired highly porous (>50 vol.%) cellular ceramics is crucial to meet the demand of high-performance lightweight and damage-tolerant materials for a number of cutting-edge applications including impact energy absorption, biomedical implants, and energy storage. A key design feature that is observed in many natural materials (e.g., nacre, bamboo, wood, etc.) is the presence of hierarchical microstructure that results in an excellent synergy of various material properties, which are otherwise considered as mutually exclusive in current paradigm of materials design. To this end, development of multilayered, interconnected and anisotropic cellular ceramics could benefit the aforementioned applications. However, mimicking …

Wide Bandgap Organo‐Lead Trihalide Perovskites For Solar Cells, Miao Hu

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Methylammonium lead trihalide perovskite (MAPbX3, where MA is methylammonium, and X is a halide)-based solar cells have been extensively investigated recently, with a demonstrated and certified solar power conversion efficiency (PCE) exceeding 20%. To further boost the PCE beyond the Schockley–Queisser limit, tandem structured solar cells have been investigated based on integrating MAPbX3 and the lower bandgap solar cells. Although the best reported efficiency for this type of tandem cells is not close to the theoretically achievable value, mixed-halide perovskite MAPbBrxI3–x is still one of the most promising candidates as the wide-bandgap light absorber for the tandem application to match …

Technical Developments In Fish Exclusion, Guidance, And Collection Materials, A. L. Peters

International Symposium on Hydraulic Structures

Construction of mills, dams and other structures in rivers and streams, and the withdrawal of water for irrigation or cooling industrial facilities vital to social and economic progress, have impacted the survival of marine life. Barriers and guidance or collection nets can protect fish and aquatic species while allowing water to flow unimpeded for commercial and industrial use. However, nets can attract aquatic growth, fill with debris, degrade with environmental stress, and be expensive to operate and maintain.

A closer look at the technical developments of materials and net designs in diverse settings can offer guidance that will be of …

Green Synthesis Nanocomposite Membranes, Dibakar Bhattacharyya, Vasile Smuleac, Rajender S. Varma, Subhas K. Sikdar

Chemical and Materials Engineering Faculty Patents

A nanocomposite membrane includes a macroporous polymer membrane having a plurality of pores. A plurality of metal nanoparticles are synthesized and immobilized within those plurality of pores. The nanoparticles are reduced and capped with a green reducing and capping agent such as green tea extract.

Controlling The Corrosion And Cathodic Activation Of Magnesium Via Microalloying Additions Of Ge, R. L. Liu, M. F. Hurley, A. Kvryan, G. Williams, J. R. Scully, N. Birbilis

Materials Science and Engineering Faculty Publications and Presentations

The evolution of corrosion morphology and kinetics for magnesium (Mg) have been demonstrated to be influenced by cathodic activation, which implies that the rate of the cathodic partial reaction is enhanced as a result of anodic dissolution. This phenomenon was recently demonstrated to be moderated by the use of arsenic (As) alloying as a poison for the cathodic reaction, leading to significantly improved corrosion resistance. The pursuit of alternatives to toxic As is important as a means to imparting a technologically safe and effective corrosion control method for Mg (and its alloys). In this work, Mg was microalloyed with germanium …

The Progress Of Order-Structured Membrane Electrode Assembly, Shang-Feng Jiang, Bao-Lian Yi

Journal of Electrochemistry

Performances of proton exchange membrane fuel cells (PEMFCs) have been recently improved. However, the cost and Pt loading must be further reduced for the commercialization of PEMFCs. Previous researches have proved that the order-structured electrode is beneficial to the effective utilization of Pt-based catalysts, decreasing the Pt loading and increasing the three-phase boundary for reaction. Especially, the nanostructure thin films (NSTFs) electrode, an ultra-thin catalytic layer developed by 3M Company, demonstrates high performance and durability. Besides, some other researchers have employed the high conductive carbon nanotube arrays or high stable metal oxide arrays as the order-structured catalyst supports for fundamental …

Recent Progress In Solid-State Nmr Study Of Electrode/Electrolyte Materials For Lithium/Sodium Ion Batteries, Gui-Ming Zhong, Zi-Geng Liu, Da-Wei Wang, Qi Li, Ri-Qiang Fu, Yong Yang

Journal of Electrochemistry

Solid state NMR technique is a powerful tool for characterizing the local structure and compositions of solid materials quantitatively. A comprehensive understanding of the structure evolution during the electrochemical reactions of the materials for lithium/sodium ion batteries will be obtained with the combination of solid state NMR, XRD, and XAS methods. Through analyzing solid state NMR spectra, we can obtain the compositions, local structures and ion diffusion dynamics of electrodes, electrolytes and surface layers for lithium/sodium ion batteries, providing an important theoretical support for the design and development of high-performance materials for batteries. In this paper, we review the recent …

Synthesis, Structural Diversity, And Redox Control Of Cyclometalated Monoruthenium Complexes, Zhong-Liang Gong, Jiang-Yang Shao, Yu-Wu Zhong

Journal of Electrochemistry

Cyclometalated ruthenium complexes have received increasing attractions recently due to their excellent redox and photophysical properties. One structural feature of these complexes is that there is a ruthenium-carbon (Ru-C) σ bond presented in the molecule. Three common methods, namely, the “late metalation”, “early metalation”, and “transmetalation” methods, for the synthesis of cyclometalated ruthenium complexes are discussed and summarized. General strategies for the design of cyclometalating ligand and cyclometalated ruthenium complexes are introduced. By using different ancillary ligands, such as pyridine, imidazole, triazole, and pyrimidine, a great number of ruthenium complexes can be prepared. The presence of the Ru-C bond significantly …

3, 4-Ethylenedioxythiophene Monomer As Safety-Enhancing Additive For Lithium Ion Batteries, Wei-Xiao Ji, Feng Wang, Jiang-Feng Qian, Yu-Liang Cao, Xin-Ping Ai, Han-Xi Yang

Journal of Electrochemistry

Safety concern is a major obstacle hindering the wide applications of large-capacity lithium ion batteries (LIBs) in electric vehicles. In this paper, a polymerizable monomer of 3, 4-ethylenedioxythiophene (EDOT) was proposed and tested as an electrolyte additive for enhancing the safety of LIBs. The electro-oxidative polymerization behaviors and influence of PEDOT additive on the thermal behavior of LiCoO₂ cathode, as well as the safety performance and electrochemical properties of LiCoO₂-based LIBs were investigated. The results from cyclic voltammetry (CV) and transmission electron microscope (TEM) characterizations indicated that the monomer additive can be electro-oxidatively polymerized to form a …

Reduced Graphene Oxide (Rgo) Hollow Network Cages For High-Performance Electrochemical Energy Storage, Chi Zhang, Xu-Jun He, Gao-Ren Li

Journal of Electrochemistry

The reduced graphese oxide (RGO) hollow network cages were synthesized via zinc oxide (ZnO) template-assisted electrodeposition. The as-prepared RGO hollow network cages exhibited the multi-level architectures, from nano sheets, porous structures, networks, to 3D microscaled hollow cages, which can simultaneously optimize transport of electroactive species, utilization rate of electrode material, and super capacitive performance. Electrochemical measurements confirmed the superior performance of RGO hollow network cages for supercapacitors (SCs), such as high Csp (393 F⋅g^-1 at 1.0 A⋅g^-1), excellent rate capability (21.2% Csp loss from 1.0 to 20 A⋅g^-1), and superior cycling stability (< 1% Csp loss after 10000 cycles).

Developments Of Photo-Assisted Fuel Cells, Ling-Ling Zhang, Shao-Jun Dong

Journal of Electrochemistry

The exploitation and utilization of fossil fuels have led to serious energy crisis and environmental pollution. In this case, the development of renewable energy is an alternative to traditional energy consumption. Fuel cells (FCs) can convert chemical energy into electricity via the electrochemical reaction, which is green and environment-friendly. Photo-assisted FCs integrate photo-responsive components into FCs, leading to the dual routes of energy conversion including light energy to electricity and chemical energy to electricity, and thus, improving the energy utilization efficiency. The development of photo-assisted FCs is significant for practical application and promising to solve the coming energy crisis. In …

Preparation And Characterization Of Van Der Waals Heterostructures, Horacio Coy Diaz

USF Tampa Graduate Theses and Dissertations

In this dissertation different van der Waals heterostructures such as graphene-MoS₂ and MoTe₂-MoS₂ were prepared and characterized. In the first heterostructure, polycrystalline graphene was synthesized by chemical vapor deposition and transferred on top of MoS₂ single crystal. In the second heterostructure, MoTe₂ monolayers were deposited on MoS₂ by molecular beam epitaxy.

Characterization of graphene-MoS₂ heterostructures was conducted by spin and angle resolve spectroscopy which showed that the electronic structure of the bulk MoS₂ and graphene in this van der Waals heterostructures is modified. For MoS₂ underneath the graphene, a band …

Simultaneous Metal-Insulator And Antiferromagnetic Transitions In Orthorhombic Perovskite Iridate Sr0.94Ir0.78O2.68 Single Crystals, Hao Zheng, Jsaminka Terzic, Feng Ye, X. G. Wan, D. Wang, Jinchen Wang, Xiaoping Wang, P. Schlottmann, Shujuan Yuan, Gang Cao

Center for Advanced Materials Faculty Publications

The orthorhombic perovskite SrIrO₃ is a semimetal, an intriguing exception in iridates where the strong spin-orbit interaction coupled with electron correlations tends to impose an insulating state. We report results of our investigation of bulk single-crystal S_r0.94Ir_0.78O_2.68 or Ir-deficient, orthorhombic perovskite SrIrO₃. It retains the same crystal structure as stoichiometric SrIrO₃ but exhibits a sharp, simultaneous antiferromagnetic (AFM) and metal-insulator (MI) transition occurring in the basal-plane resistivity at 185 K. Above it, the basal-plane resistivity features an extended regime of almost linear temperature dependence up to 800 K but the strong …

The Impact Of Volunteering At A Girls Outreach Activity On Community Formation, Donna C. Llewellyn, Janet Callahan, Amy J. Moll, Catherine Rose Bates

Materials Science and Engineering Faculty Publications and Presentations

This paper is focused on exploring the motivation for volunteering at an engineering outreach activity. The outreach activity itself involved a two day, overnight experience for 9th and 10th grade girls that started in 2005, and which has been held annually since that time. The outreach event takes place in Boise, Idaho, and at the time of its onset was the only outreach or camp activity in the state focused on girls or young women. Across ten years, 510 total girls have participated, with approximately 85% of them coming from the immediate metropolitan area. The program was developed with a …

The Effects Of Ionizing Radiation And Oxidizing Species On Strains Of Deinococcus Radiodurans Lacking Endogenous Oxidative Protection Methods, Dylan L. Klawuhn

Theses and Dissertations

Multiple strains of Deinococcus radiodurans were transformed, creating knockout mutations in genes responsible for manganese ion transport, manganese and copper/zinc super-oxide dismutase, and bacillithiol synthesis. These mutated strains were then irradiated with ~20,000 Gys. The results showed that the mutated strains had a higher sensitivity to ionizing radiation, those responsible for bacillithiol synthesis having an increase in sensitivity 3000 times more than wild type Deinococcus radiodurans. In addition to radiation the mutated strains were also exposed to paraquat, an oxidizing herbicide. Strains missing manganese super-oxide dismutase showed increased sensitivity.

Microfacet Wavelength Scaling Of The Brdf, Samuel E. Freda

Theses and Dissertations

The bidirectional reflectance distribution function (BRDF) describes realistic scattering of light off materials by relating incident irradiance to outbound radiance. One popular class of BRDF models assumes a surface is comprised of tiny microfacets. The drawback of microfacet BRDFs is that they often no not contain specific material parameters and neglect wavelength effects. Wave optics BRDF expressions, however, can describe wavelength effects at the expense of being more computationally cumbersome. Previous work of following a Beckmann-Kirchhoff derivation of BRDF, then relating wave optics BRDF coordinates to microfacet coordinates led to a complicated, but versatile, BRDF. In this work, the infinite …

Observation Of Metallic Surface States In The Strongly Correlated Kitaev-Heisenberg Candidate Na2Iro3, Nasser Alidoust, Chang Liu, Su-Yang Xu, Ilya Belopolski, Tongfei Qi, Minggang Zeng, Daniel S. Sanchez, Hao Zheng, Guang Bian, Madhab Neupane, Yu-Tzu Liu, Stephen D. Wilson, Hsin Lin, Arun Bansil, Gang Cao, M. Zahid Hasan

Center for Advanced Materials Faculty Publications

We report high-resolution angle-resolved photoemission spectroscopy measurements on the honeycomb iridate Na₂IrO₃. Our measurements reveal the existence of a metallic surface band feature crossing the Fermi level with nearly linear dispersion and an estimated surface carrier density of 3.2 x 10¹³ cm^-2, which has not been theoretically predicted or experimentally observed, and provides the first evidence for metallic behavior on the boundary of this material, whereas the bulk bands exhibit a robust insulating gap. We further show the lack of theoretically predicted Dirac cones at the M¯ points of the surface Brillouin …

Anisotropic Softening Of Magnetic Excitations In Lightly Electron-Doped Sr2Iro4, X. Liu, M. P. M. Dean, Z. Y. Meng, M. H. Upton, T. Qi, T. Gog, Y. Cao, J. Q. Lin, D. Meyers, H. Ding, Gang Cao, J. P. Hill

Center for Advanced Materials Faculty Publications

The magnetic excitations in electron-doped (Sr_1−xLa_x)₂IrO₄ with x = 0.03 were measured using resonant inelastic x-ray scattering at the Ir L₃ edge. Although much broadened, well defined dispersive magnetic excitations were observed. Comparing with the magnetic dispersion from the undoped compound, the evolution of the magnetic excitations upon doping is highly anisotropic. Along the antinodal direction, the dispersion is almost intact. On the other hand, the magnetic excitations along the nodal direction show significant softening. These results establish the presence of strong magnetic correlations in electron-doped (Sr_1−xLa_{x …}

Progress Of Carbonation In Chloride Contaminated Concretes, Yaocheng Wang, P. A.M. Basheer, S. Nanukuttan, Y. Bai

International Conference on Durability of Concrete Structures

Concretes used in marine environment are generally under the cyclic effect of CO₂ and chloride ions (Cl^-). To date, the influence of carbonation on ingress of chloride ions in concretes has been widely studied; in comparison, study on the influence of Cl^- on the progress of carbonation is limited. During the study, concretes were exposed to independent and combined mechanisms of carbonation and chloride ingress regimes. Profiles of apparent pH and chloride concentration were used to indicate the progress of carbonation and ingress of Cl^- in concretes. From the apparent pH profile, a carbonation front …

Carbon Fiber As Anode Material For Cathodic Prevention In Cementitious Materials, Emma Qingnan Zhang, Luping Tang, Thomas Zack

International Conference on Durability of Concrete Structures

Cathodic prevention (CPre) technique is a promising method and has been used for the past two decades to prevent steel from corrosion in concrete structures. However, wide application of this technique has been restricted due to high costs of anode materials. In order to lower the cost and further improve this technique, carbon fiber composite anode has been introduced as an alternative anode material with affordable price and other outstanding properties. This paper presents the study of using carbon fiber mesh as anode material for long-term cathodic prevention system and the effect of accelerated current on macro- and microstructure of …

Corrosion Of Steel In Concrete And Its Prevention In Aggressive Chloride-Bearing Environments, Luca Bertolini, Maddalena Carsana, Matteo Gastaldi, Federica Lollini, Elena Redaelli

International Conference on Durability of Concrete Structures

This keynote paper deals with the durability of reinforced concrete (RC) structures exposed to aggressive environments characterized by high concentration of chloride ions, namely, marine environments or the use of de-icing salts. The mechanism of chloride-induced corrosion of steel in concrete is introduced, and its influence on the service life of RC structures is analyzed. Factors affecting the time to corrosion initiation are described with regard to both concrete properties and environmental exposure conditions. Design approaches available for achieving durability targets associated with the design service life are analyzed, focusing on studies carried out by the authors in recent years …

Comparison Study Of Tensile Strength , Ductility, And Fracture Mode Of H11, Arp 2000, And Mp35n Connecting Rod Bolts For Use In High Performance Racing Engines, Megan Mccabe, Samuel Randall

Materials Engineering

Oliver Racing Parts (ORP) has historically purchased connecting rod bolts made of high strength, high cost, nickel-cobalt alloy, MP35N, and a medium strength, low cost, proprietary tool steel called ARP 2000. ORP has recently acquired capabilities to manufacture their own bolts. To determine the quality of their product as it compares to their previous supplier, ORP produced three different types of ⅜” diameter bolts: one set of bolts made of MP35N, and two sets of H11 bolts, designated H11A and H11B for their respective processing. The H11, ARP 2000, and MP35N bolts were tensile tested using a custom designed test …

Improving The Mechanical Performance Of 3d Printed Parts Using Fused Filament Fabrication, Inderpreet Binning

Industrial and Manufacturing Engineering

The 3D printing industry has seen rapid growth in the last 10 years and has been called the next industrial revolution. There are several different processes used in 3D printing, but the most popular process is called Fused Filament Fabrication (FFF) or Fused Deposition Modeling (FDM). This is the process where (most commonly) plastic filament enters a nozzle, is heated to a semi-liquid state, and then deposited into a pattern to create a print. One major drawback to this process is that the prints are anisotropic. This means that the strength of the print varies with the orientation that it …

Superalloy Metallurgy A Gleeble Study Of Environmental Fracture In Inconel 601, Alan C. Demmons

Master's Theses

At temperatures above 0.5 Tm and in aggressive atmospheres predicting alloy performance is particularly challenging. Nickel alloys used in regimes where microstructure and properties are altered dynamically present unique requirements. Exposure may alter properties with unexpected early failure. The Gleeble is a valuable tool for investigation and simulation of thermo-mechanical properties of an alloy in various regimes up to the threshold of melting. In this study, four regimes of temperature and strain rate were simulated in an argon atmosphere to both investigate and document normal and abnormal failure modes. Commercial Inconel 601 was tested in selected regimes and in two …

Solution Casting And Mechanical Testing Of Arabinan-Cellulose Nanocomposites, Kevin Su, Alina Lusebrink

Materials Engineering

The purpose of this work was to investigate methods to produce consistent, reliable, and testable thin films of arabinan-cellulose nanocomposites. Mechanical properties and composition of the Opuntia ficus-indica cactus spines served as motivation for this research. The high specific strength and stiffness, biodegradability, and sustainability of these spines inspired the creation of composites fabricated from the same materials found in cactus spines: arabinan and nanocrystalline cellulose (NCC). Arabinan serves as the matrix material and NCC as the reinforcement. To explore the feasibility of using a non-toxic solvent, different solution casting techniques with water as a solvent were investigated. Ultrasonication was …