Materials Science and Engineering Commons^™

Material Composition And Toxicology Of Cosmetic Products, Hilda Gonzalez

Materials Engineering

In today’s modern society, the U.S. Food and Drug Administration regulates many industries to protect consumers’ health; the cosmetics industry is not one of them. Through self-regulation, companies continue to sell products for topical use on the body that have been known to contain toxic chemicals with little to no testing on the effects they have on the human body. The purpose of this project was to determine the content of such known toxins in five different brands of face powders. X-Ray Diffraction (XRD) was used to verify the primary component and Inductively Coupled Plasma-Optical Emissions Spectroscopy (ICP-OES) was used …

The Environmental Impact Assessment Of Cal Poly's Manufacturing Laboratory, Yoonho Mark Kim

Materials Engineering

The purpose of the study is to obtain basic understanding of the sustainability of Cal Poly IME 144 laboratory. Since the general condition of the lab prevents precise, efficient data collection, fuzzy logic is used to provide an overview of the laboratory's sustainability. Aluminum chips, brass chips, and paper waste are identified as primary waste streams. Electric usage of the laboratory is approximately calculated based on the machines' running time. Fuzzy logic system with three inputs and one output is designed in the Matlab software environment with Simulink to simulate a model for the laboratory's sustainability. Also the study suggests …

The Effect Of Silicon On The Electrochemical Corrosion Resistance Of Carbon Steel, Loan Faget, Michael S. Rouse

Materials Engineering

The purpose of this study was to investigate how the silicon (Si) content of carbon steels affects their electrochemical corrosion resistance. Tests were conducted using concentrated HCl and carbonated water on three carbon steels with different levels of silicon: 0.02, 0,19, and 0.94 weight percent. Like H2S, the prime concern of Chevron, HCl and CO2 are corrosive components in oil refinery. Electrochemical properties were measured using a potentiodynamic test outlined in Standard ASTM G59-97: Test Method for Conducting Potentiodynamic Polarization Resistance Measurements. Previous studies have determined that adding silicon to steel increases the corrosion resistance; however, results show that corrosion …

Prediction Of Tribological Behavior Of Candidate Materials For Rotor Seals, John W. Franzino, Will F. Michul

Materials Engineering

To reduce high costs associated with manufacturing and testing materials for rotor seals, a procedure needs to be developed to quickly and accurately test candidate materials as they are released. The test should reduce the amount of fabrication required and model working conditions in order to accurately assess the tribological behavior of candidate materials. A possible solution was examined that utilized a rig meant to model operational stresses and wear. Compression modulus data was then taken in order to quantify the accumulation of damage due to microcracking, the primary mode of failure, through a damage index parameter. Testing results concluded …

Characterization Of A Thin Film Composite Membrane: Fluorinated Copolymer In A Carbon Nanotube Matrix, Eric P. Bonaventure, Michael A. Brew, Cynthia R. Shannon

Materials Engineering

IDEX Health and Science has created a thin-film composite membrane consisting of a carbon nanotube matrix impregnated with a fluorinated copolymer called Teflon® AF 2400. This membrane is being studied for use in degassing chambers of analytical instruments such as a High Pressure Liquid Chromatography (HPLC) degassing modules. The level of impregnation of the Teflon® in the carbon matrix affects the diffusion properties which are crucial for the performance of the membrane. Scanning Electron Microscopy (SEM) characterization techniques were used to measure the outer Teflon® and the inner carbon matrix layer thickness. The outer Teflon® and inner carbon matrix layer …

Development Of Low Temperature, Aqueous Synthesis Method Of Lead Sulfide Quantum Dots, Albert Nakao, Colin Yee

Materials Engineering

Quantum dots have become an active area of research in the past decade due to their unique properties. Quantum confinement effects allow for efficient spectral conversion and size tunable fluorescence and absorption peaks. Near infrared spectral converting lead sulfide quantum dots have potential applications in solar power, biological imaging and communications technology. However at Cal Poly, lead sulfide dots have not been synthesized. The quantum dot synthesis currently adapted at Cal Poly encompasses organometallic precursors at high reaction temperatures, producing cadmium selenium dots. The organometallic approach has been found to produce nanocrystals with high quality photoluminescence, but due to its …

Influence Of Nanofiller Morphology On The Viscoelastic Properties Of Cnf/Epoxy Resins, Liberata Guadagno, Marialuigia Raimondo, Khalid Lafdi, Annalisa Fierro, Salvatore Rosolia, Maria Rossella Nobile

Chemical and Materials Engineering Faculty Publications

In this paper we discuss the viscoelastic properties of CNF/Epoxy-Amine Resins for structural applications. The use of reactive diluent inside the unfilled and nanofilled epoxy mixture as proven to be of benefit to strongly decrease the viscosity.

Electroplating Of Nanoengineered Polymer Substrate, Brandon Voelker

Masters Theses

The development of a polyethylene based polymer with metallic inclusions, a nanoengineered polymer, has recently opened up great potential for many new commercial and industrial applications. The major advantage of developing these nanoengineered polymers is to be able to tailor the resistance and other properties by varying the composition of the polymer. The industrial usage of this polymer benefits from the addition of an electrically conductive, metallic coating. This research develops methods of electroplating nickel and copper layers on to the polymer substrates using DC and pulsed techniques.

Electroplating is conducted in a 1000 mL beaker using a specialized plating …

Local Vibrational Modes Competitions In Mn-Doped Zno Epitaxial Films With Tunable Ferromagnetism, Qiang Cao, Maoxiang Fu, Guolei Liu, Huaijin Zhang, Shishen Yan, Yanxue Chen, Liangmo Mei, Jun Jiao

Mechanical and Materials Engineering Faculty Publications and Presentations

We reported spectroscopic investigations of high quality Mn-doped ZnO (ZnMnO) films grown by oxygen plasma-assisted molecular beam epitaxy. Raman scattering spectra revealed two local vibrational modes (LVMs) associated with Mn dopants at 523 and 712cm^-1. The LVMs and magnetic properties of ZnMnO films can be synchronously modulated by post annealing processing or by introducing tiny Co. The relative intensity of two LVMs clearly shows competitions arising from uncompensated acceptor and donor defects competition for ferromagnetic and nonmagnetic films. The experimental results indicated that LVM at 523 cm^-1 is attributed to Mn—(Zinc-vacancy) complexes, while LVM at 712 cm …

The Effects Of Austempering And Cryogenic Processing On The Mechanical Properties Of Forged E4340 Steel For Automotive Engine Connecting Rods, Aaron Taylor Ludlow

Materials Engineering

The components in top-fuel dragster and stock car engines undergo significantly more force than their production passenger vehicle counterparts do. Therefore, they must be manufactured and processed to withstand those forces so that they do not catastrophically fail while in service. In this project, the effects of austempering and adding a cryogenic processing step to the control quench and double temper heat treatment on the tensile and hardness properties of E4340 high-strength steel were examined. Tensile test samples were machined from raw connecting rod forgings and underwent either a quench-double temper heat treatment, an austempering heat treatment, or the quench-double …

A Novel Silica-Based Nano Pigment As A Titanium Dioxide Replacement, Ryan Stoneburner

Masters Theses

This research focused on the evaluation of a new Silica-based pigment for the replacement of titanium dioxide (TiO₂) in paperboard coatings. The silica-based pigment has shown the ability to be a replacement in terms of functionality and runnability. TiO₂ is currently the highest opacifying pigment used in paper coatings, but it is also the most costly. Finding a less expensive pigment that doesn't reduce effectiveness is critical to reducing the cost of TiO₂ formulations. To evaluate the new pigment, coatings will be applied using a Cylindrical Laboratory Coater (CLC) with varying amounts of TiO₂ and …

Revealing Prior Austenite Grain Boundaries Of 4340 Steel, Ryan Brierly Barrows

Materials Engineering

Grain growth during austenitization has a negative effect on fatigue strength. Several methods have been investigated in order to determine an accurate method of measuring the austenite grain size of 4340 steel. The McQuaid-Ehn method, an industry standard for evaluating austenite grain size, has been recognized to produce inaccurate results due to the coarsening of grains during extended austenitizing. A method utilized for hypoeutectoid steels, outlined by the ASTM-E112 standard, is investigated to potentially obtain more accurate results by reducing the duration of austenitizing. Studies regarding effective etching procedures for revealing austenite grains without austenitizing are also addressed. Samples are …

Copper Doping Of Zno Crystals By Transmutation Of 64Zn To 65Cu: An Electron Paramagnetic Resonance And Gamma Spectroscopy Study, Matthew C. Recker, John W. Mcclory, Maurio S. Holston, Eric M. Golden, Nancy C. Giles, Larry E. Halliburton

Faculty Publications

Transmutation of ⁶⁴Zn to ⁶⁵Cu has been observed in a ZnO crystal irradiated with neutrons. The crystal was characterized with electron paramagnetic resonance (EPR) before and after the irradiation and with gamma spectroscopy after the irradiation. Major features in the gamma spectrum of the neutron-irradiated crystal included the primary 1115.5 keV gamma ray from the ⁶⁵Zn decay and the positron annihilation peak at 511 keV. Their presence confirmed the successful transmutation of ⁶⁴Zn nuclei to ⁶⁵Cu. Additional direct evidence for transmutation was obtained from the EPR of Cu²⁺ ions (where ⁶³Cu and ^{65 …}

The Effect Of Clay, Cement And Fibers On The Strength And Durability Of Compressed Earth Blocks, Wyatt Adair Banker-Hix

Master's Theses

This Thesis examines the effect of soil characteristics, cement content and fibers on the strength and durability of compressed earth blocks (CEBs). This work expands on the available information regarding the constituent properties which affect the compressive and tensile strengths and durability of CEBs. Additionally, little research on the subject of synthetic fibers and their effect on strength and durability of CEBs is available and this work provides an initial study in this area.

To study the effects of fibers, as well as confirm the trends of previous research regarding the effects of clay and cement, 27 unique batches of …

Material Potential | Recontextualizing Material Libraries, Diana Wagner

Masters Theses

Material libraries are growing resources that offer an opportunity for artists and designers to discover a variety of materials. These collections are composed in a traditional taxonomy, pairing materials based on composition. Samples are typically commercially made and are displayed independent of context, means of production, cultural significance, and application.

Through making we learn a material’s potential: the transformation it can make, the form it can take, and the new composites we can create. This generative experience lives in the studio and workshop. But how can we introduce this language of process, critical thinking, and making to activate and challenge …

Low Noise, High Detectivity Photodetectors Based On Organic Materials, Fawen Guo

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Organic photodetectors (OPDs) are potentially useful in many applications because of their light weight, flexibility and good form factors. Despite the high detectivities that have been frequently reported for OPDs recently, the application of these OPDs for weak light detection has been rarely demonstrated.

In this thesis, low noise, high gain photodetectors based on organic and ZnO nanoparticles were proposed and demonstrated for highly sensitive UV light detection. The nanocomposite photodetector works in a hybrid mode of photodiode and photoconductor with the transition controlled by the UV light illumination. The nanocomposite detector shows two orders of magnitude higher sensitivity than …

Effects Of Temperature And Humidity On The Barrier Properties Of Biaxially-Oriented Polypropylene And Polyvinyl Alcohol Films, Chen Mo, Wang Yuan, Wang Lei, Yin Shijiu

Journal of Applied Packaging Research

The goal of this work was to study the effects of relative humidity (RH) and temperature on the barrier properties of biaxially-oriented polyvinyl alcohol (BOVLON) and polypropylene (BOPP) films. The water vapor transmission rate (WVTR) and the oxygen transmission rate (OTR) of the BOVLON and BOPP films were determined with MOCON PERMATRAN-W and MOCON OX-TRAN at 10℃-40℃ and 35%-90% RH. The results indicated that RH and temperature had different influence on the WVTR and OTR of the BOVLON and PP films. The OTR and WVTR values of the BOVLON films increase both exponentially with RH. Their WVTR values increase exponentially …

The Next Steps For Ultra-High Temperature Ceramics, Eric Wuchina, M. Opeka

Ultra-High Temperature Ceramics: Materials For Extreme Environmental Applications II

No abstract provided.

Sic/Sic Ceramic Matric Composites: A Turbine Engine Perspective, Adam Chamberlain, Jay Lane

Ultra-High Temperature Ceramics: Materials For Extreme Environmental Applications II

No abstract provided.

Low-Temperature Mocvd Process For Deposition Of Ir- And Hf-Containing Refractory Films, N.B Morozova, N.V. Gelfond, I.K. Igumenov, N.I. Baklanova

Ultra-High Temperature Ceramics: Materials For Extreme Environmental Applications II

No abstract provided.

Characterization Of 3d Interconnected Microstructural Network In Mixed Ionic And Electronic Conducting Ceramic Composites, William M. Harris, Kyle S. Brinkman, Ye Lin, Dong Su, Alex P. Cocco, Arata Nakajo, Matthew B. Degostin, Yu-Chen Karen Chen-Wiegart, Jun Wang, Fanglin Chen, Yong S. Chu, Wilson K. S. Chiu

Faculty Publications

The microstructure and connectivity of the ionic and electronic conductive phases in composite ceramic membranes are directly related to device performance. Transmission electron microscopy (TEM) including chemical mapping combined with X-ray nanotomography (XNT) have been used to characterize the composition and 3-D microstructure of a MIEC composite model system consisting of a Ce_0.8Gd_0.2O₂ (GDC) oxygen ion conductive phase and a CoFe₂O₄ (CFO) electronic conductive phase. The microstructural data is discussed, including the composition and distribution of an emergent phase which takes the form of isolated and distinct regions. Performance implications are considered …

Ceramic Welds, And A Method For Producing The Same, Greg Hilmas, William Fahrenholtz, Jeremy Lee Watts, Harlan James Brown-Shaklee

Materials Science and Engineering Faculty Research & Creative Works

A method of producing a ceramic weld, including identifying a ceramic first surface and a ceramic second surface to be bonded together, maintaining a non-oxidizing atmosphere over the first and second surfaces, and engaging the first and second surfaces to define a joint. An arc is generated between an electrode and the joint to create a liquid phase, and the liquid phase is cooled to yield a solid fusion layer, wherein the first and second surfaces are joined in the fusion layer.

A First-Principles Examination Of Dopants In Hfo2, Daniel Cunningham

Honors Scholar Theses

A systematic first-principles study using density functional theory was performed on dopants in HfO2, a material with great importance as a high-k dielectric. Sixteen dopants were tested, most of which came from the fourth period of the periodic table (K-Ge, Al and Si). The relative stability of the monoclinic, tetragonal, and cubic phases were calculated for HfO2 with each dopant in order to determine which dopants tend to stabilize which phases. It was found that the most important factor in determining relative phase stability of doped HfO2 was the ionic radius of the dopant, where dopants smaller than Hf tend …

Design And Fabrication Of Electrostatically Actuated Serpentine-Hinged Nickel-Phosphorous Micromirror Devices, Nicholas A. Wiswell

Master's Theses

A process for micromachining of micro-mirror devices from silicon-on-insulator wafers was proposed and implemented. Test methods and force applicators for these devices were developed. Following successful fabrication of these devices, a novel process for fabrication of devices out of the plane of the silicon wafer was proposed, so that the devices could be actuated electrostatically. In particular, the process makes use of thick photoresist layers as a sacrificial mold into which an amorphous nickel-phosphorous alloy may be deposited. Ideal design of the electrostatically actuated micro-mirrors was investigated, and a final design was selected and modeled using FEA software, which found …

Fabrication And Characterization Of Edge-Emitting Semiconductor Lasers, Junyeob Song

Graduate Theses - Physics and Optical Engineering

The semiconductor laser was invented in 1962, and has recently become ubiquitous in modern life. This thesis focuses on the development of a semiconductor laser fabricating process which utilizes semiconductor manufacturing technology in a cleanroom environment including photolithography, etching, deposition, and bonding processes. A photomask for patterning is designed, recipes of photolithography process and etching process are developed with experiments. This work gives how to develop the process of fabrication and determine the parameters for each processes. A series of semiconductor laser devices are then fabricated using the developed process and characterization is performed to assess device performance with industrial …

Calculation And Experimental Verification Of Longitudinal Spatial Hole Burning In High-Power Semiconductor Lasers, Ting Hao

Graduate Theses - Physics and Optical Engineering

Longitudinal spatial hole burning (LSHB) is believed to be one of the limiting factors in scaling the output power of high-power semiconductor lasers. In this work, a self-consistent simulation of LSHB was performed to investigate the non-uniform longitudinal photon density distribution, carrier density distribution, and gain distribution in a high-power semiconductor laser. The calculation is based on a modification to the semiconductor laser rate equations and solved using a finite difference approach, with Newton’s method employed to numerically solve the differential equations. The impact of LSHB on output power was analyzed with different parameters, including injection current, cavity length, and …

A Comparison Of Pressure-Less Silver Sintering Materials With Conventional Electronic Die Attach Practices, Ross M. Liederbach

Electrical Engineering Undergraduate Honors Theses

This thesis contains information on an experiment which validates silver sintering paste manufacturer’s die attach processes and examines feasibility for use in commercial products. Four silver pastes were used in constructing die attach samples, which were then void and shear tested. The silver sintering materials that are investigated in this work are compared with manufacturer data and also with data from conventional attaches such as conductive epoxy and solder. In addition, materials demonstrating the highest shear strength were down-selected and processed to compare thermal characteristics with solder and conductive epoxy. Under theoretical analysis, the characteristics of silver provide the most …

Ua66 Ogden College Of Science & Engineering Newsletter, Cheryl Stevens, Dean

Ogden College of Science & Engineering Publications

No abstract provided.

The Synthesis And Characterization Of Copper Indium Sulfide And Cadmium Selenide Nanocrystals And Their Applications In Photodetectors, Zachary T. Bever

Electrical Engineering Undergraduate Honors Theses

Semiconductor nanocrystals are a topic of much interest in electrical engineering. Their use has been explored for many applications. This paper investigates the synthesis and characterization of CuInS2 and CdSe nanocrystals. As the nanocrystals were left in reaction for increasing amounts of time, the bandgap of the material decreased as the nanocrystal size increased due to the quantum confinement effect. The CdSe nanocrystals were then investigated in a photodetector application which achieved a detectivity on the order of 10^9 cmHz^(1/2)W^(-1).

Phase Transformation In Monolayer Molybdenum Disulphide With And Without Defects Under Tension Predicted By Atomistic Simulations, Khanh Quoc Dang

Graduate Theses and Dissertations

In addition to its use as a solid lubricant, molybdenum disulphide (MoS2) has gained recent attention as a possible substitute for silicon as it is increasingly difficult to keep shrinking down electronic devices made of silicon, the conventional electronic material. When thinned down to atomic thickness, monolayer MoS2 possesses very unique and promising electronic and electrical properties. Unlike electronic and electrical properties, knowledge of the mechanical properties and role of structural defects on these properties of monolayer MoS2 is unexplored. For this thesis, the two main objectives are (1) to gain insight about the failure mechanism of monolayer MoS2 by …