Materials Science and Engineering Commons^™

High Performance Piezoelectric Materials And Devices For Multilayer Low Temperature Co-Fired Ceramic Based Microfluidic Systems, Wenli Zhang

University of Kentucky Doctoral Dissertations

The incorporation of active piezoelectric elements and fluidic components into micro-electromechanical systems (MEMS) is of great interest for the development of sensors, actuators, and integrated systems used in microfluidics. Low temperature cofired ceramics (LTCC), widely used as electronic packaging materials, offer the possibility of manufacturing highly integrated microfluidic systems with complex 3-D features and various co-firable functional materials in a multilayer module. It would be desirable to integrate high performance lead zirconate titanate (PZT) based ceramics into LTCC-based MEMS using modern thick film and 3-D packaging technologies. The challenges for fabricating functional LTCC/PZT devices are: 1) formulating piezoelectric compositions which …

Low Temperature Epitaxial Growth Of Ge Quantum Dot On Si (100) - (2×1) By Femtosecond Laser Excitation, Ali Oguz Er, Wei Ren, Hani E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

Low temperature epitaxy of Ge quantum dots on Si (100) - (2×1) by femtosecond pulsed laser deposition under femtosecond laser excitation was investigated. Reflection high-energy electron diffraction and atomic force microscopy were used to analyze the growth mode and morphology. Epitaxial growth was achieved at ∼70 °C by using femtosecond laser excitation of the substrate. A purely electronic mechanism of enhanced surface diffusion of the Ge adatoms is proposed. © 2011 American Institute of Physics. [doi:10.1063/1.3537813]

Precise Control Of Highly Ordered Arrays Of Nested Semiconductor/Metal Nanotubes, Diefeng Gu, Helmut Baumgart, Kandabara Tapily, Pragya Shrestha, Gon Namkoong, Xianyu Ao, Frank Müller

Electrical & Computer Engineering Faculty Publications

Lithographically defined microporous templates in conjunction with the atomic layer deposition (ALD) technique enable remarkable control of complex novel nested nanotube structures. So far three-dimensional control of physical process parameters has not been fully realized with high precision resolution, and requires optimization in order to achieve a wider range of potential applications. Furthermore, the combination of composite insulating oxide layers alternating with semiconducting layers and metals can provide various types of novel applications and eventually provide unique and advanced levels of multifunctional nanoscale devices. Semiconducting TiO₂ nanotubes have potential applications in photovoltaic devices. The combination of nanostructured semiconducting materials …

Thermo-Physical Properties Measurement And Steel - Ceramic Shell Interactions In Investment Casting, Chirag Mahimkar

Masters Theses

"Investment casting is a process in which a ceramic shell is prepared on a wax or foam pattern. The wax is melted out or the foam is burnt out and the shell is sintered to have sufficient strength to withstand casting conditions. The investment casting process is very important as it produces near net shape castings which reduce the need for subsequent operations of castings like machining etc. Investment casting shells are subjected to a number of heating cycles during pattern removal, firing, preheating before pouring and finally during solidification. The thermo-physical properties of the shell play an important role …

Calcium Wire Ladle Treatment To Improve Cleanliness Of Centrifugal Cast Steel, Edith Yolanda Martinez Silva

Masters Theses

"Centrifugal casting provides the opportunity of combining large centrifugal forces and directional solidification to reduce non-metallic inclusions in the cast steel product. Calcium treatment in the ladle has the potential of reducing and modifying non-metallic inclusions to achieve better machinability and mechanical properties. The objective of this research is to analyze the combined effects of calcium wire ladle treatment and centrifugal casting on the number, size, composition and morphology of non-metallic inclusions in centrifugally cast steel products.

All experiments were completed at an industrial foundry. The experiments involved feeding calcium wire into the ladle after argon oxygen decarburization (AOD) and …

Growth And Characterization Of Thermoelectric Ba8Ga16Ge30 Type-I Clathrate Thin-Films Deposited By Pulsed Dual-Laser Ablation, Robert Harry Hyde

USF Tampa Graduate Theses and Dissertations

The on-going interest in thermoelectric (TE) materials, in the form of bulk and films, motivates investigation of materials that exhibit low thermal conductivity and good electrical conductivity. Such materials are phonon-glass electron-crystals (PGEC), and the multi-component type-I clathrate Ba₈Ga₁₆Ge₃₀ is in this category. This work reports the first investigation of Ba₈Ga₁₆Ge₃₀ films grown by pulsed laser deposition (PLD).

This dissertation details the in-situ growth of polycrystalline type-I clathrate Ba₈Ga₁₆Ge₃₀ thin-films by pulsed laser ablation. Films deposited using conventional laser ablation produced films that contained a …

Effect Of Nickel On Castability Of Chromium Molybdenum Steel & The Dynamic Fracture Toughness Of Hy-130, Abhilash Dash

Masters Theses

"The fill lengths of Ni alloyed Cr-Mo steels obtained from fluidity studies (Paper 1) varied linearly with superheat. A 5% Ni steel showed a maximum fill length compared to other steels tested. Ni decreased the liquidus, solidus, and dendritic coherency temperature, but it did not have any significant effect on volume fraction (0.27-0.31) of the solid phase at the dendrite coherency point. The filling time obtained experimentally at 150 C⁰ superheat for 5% Ni steel (HY 130) was close to 1.4 s. For similar conditions, the predicted fill time using a Magmasoft model was close to 1.9 s. Modeling results …

Crack Formation In Investment Casting Ceramic Shells, W. A. Everhart

Masters Theses

"This thesis is a collection of papers that discuss shell cracking in investment casting during pattern removal. The application of rigid polymeric foam for large investment casting patterns with complex geometries can improve the dimensional tolerances and the surface quality of the casting. However, these pattern materials have a tendency to promote crack formation in investment casting shells during pattern removal by firing.

The first two papers discuss the factors affecting shell cracking and methods to prevent it. Experimental methods were combined with finite element modeling to predict stress in the shell. A 3D nonlinear finite element model was developed …

Partially Halogenated Acenes And Heteroacenes For Organic Electronics, Balaji Purushothaman

University of Kentucky Doctoral Dissertations

Inorganic materials have dominated electronic applications such as photovoltaic cells, thin film transistors (TFTs) and light emitting diodes (LEDs). However developments in the field of organic electronics over the past three decades have enabled the use of organic materials in these devices. While significant improvements have been made to improve their electronic properties there are several road blocks towards commercial application. One of the significant obstacles is the poor charge carrier mobility associated with organic semiconductors processed by well established printing methods. The goal of my research project is to improve the charge carrier mobility of solution cast films of …

Stabilisation Of Linear-Cavity Fibre Laser Using A Saturable Absorber, David Michel, Feng Xiao, Kamal Alameh

Research outputs 2011

We investigate the optimisation of the length of an un-pumped erbium doped fibre (EDF) in order to suppress amplifier noise in a linear-cavity fibre laser structure. The experimental results demonstrate the existence of an optimum length of the un-pumped EDF which eliminates noise due to high optical pumping powers, thus leading to a stable laser output.

Garnet Multilayer Thin Film Structure With Magnetostatically-Altered And Improved Magnetic Properties Prepared By Rf Magnetron Sputtering, Mohammad Nur-E-Alam, Mikhail Vasiliev, Viacheslav Kotov, Kamal Alameh

Research outputs 2011

We prepare an all-garnet multilayer film structure by sandwiching a magneto-soft garnet material in between two magneto-hard garnet materials with high bismuth substitution levels using RF magnetron sputtering technique and investigate the microstructure and the effects of magnetostatic inter-layer coupling on magnetic properties. Both types of the Bi-substituted magneto-optic garnet materials used possess excellent optical, magnetic and magneto-optical properties suitable for the application in different new and emerging technologies in optics and photonics. Garnet layers of composition type Bi2Dy1Fe4Ga1O12 have strong perpendicular magnetic anisotropy and Bi1.8Lu1.2Fe3.6Al1.4O12 magneto-soft layer features magnetization behavior similar to that of in-plane magnetized films. The all-garnet …

Nonuniformity In Lattice Contraction Of Bismuth Nanoclusters Heated Near Its Melting Point, A. Esmail, M. Abdel-Fattah, Hani E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

The structural properties of bismuth nanoclusters were investigated with transmission high-energy electron diffraction from room temperature up to 525 ± 6 K. The Bi nanoclusters were fabricated by thermal evaporation at room temperature on transmission electron microscope grids coated with an ultrathin carbon film, followed by thermal and femtosecond laser annealing. The annealed sample had an average cluster size of ∼14 nm along the minor axis and ∼16 nm along the major axis. The Debye temperature of the annealed nanoclusters was found to be 53 ± 6 K along the [012] direction and 86 ± 9 K along the [110] …

Fundamental Studies Of Co-Base Superalloy Biomedical Prototypes Fabricated By Electron Beam Melting: Microstructures And Microstructural Architecture, Sara M. Gaytan

Open Access Theses & Dissertations

Rapid prototyping, especially electron beam melting (EBM) technology by ARCAM have proven to provide outstanding microstructural and mechanical properties on different alloys fabricated by this technology. Being a computer designed driven technology, complex components, that are hard or even impossible to fabricate by traditional manufacturing techniques, can be fabricated by layer-by-layer EBM technology.

Microstructural and mechanical properties are compared for an EBM femoral knee component prototype with a traditionally-fabricated and body-removed femoral knee implant. Block and cylindrical shape components fabricated by EBM were also analyzed for this project. The alloy utilized for these components is Co-26Cr-6Mo-0.2C characterized by the standards …

Ballistic Projectile Metallurgical Issues And Fundamentals: Aerosol Production In Rod Penetration Erosion And Erosion Phenomena Associated With Railgun Development, Brenda Ivette Machado

Open Access Theses & Dissertations

The issue is derived from ballistic erosion as it relates to nanoparticle production and respiration of these particles as a health concern ballistic erosion and ballistic erosion as it relates to railgun performance. A common thread between these two issues is dynamic recrystallization (DRX). DRX has been demonstrated to be the dominant mechanism for solid-state flow associated with ballistic projectile/target penetration and interaction, friction-stir welding phenomena, and other high-strain rate deformation phenomena.

Aerosol particulates collected on filters from ballistic penetration and erosion events for W-Ni-Co and W-Ni-Fe kinetic energy rod projectiles penetrating steel target plates were observed to be highly …

Microstructural Architecture Developed In The Fabrication Of Solid And Open-Cellular Copper Components By Additive Manufacturing Using Electron Beam Melting, Diana Alejandra Ramirez

Open Access Theses & Dissertations

The fabrication of Cu components were first built by additive manufacturing using electron beam melting (EBM) from low-purity, atomized Cu powder containing a high density of Cu2O precipitates leading to a novel example of precipitate-dislocation architecture. These microstructures exhibit cell-like arrays (1-3µm) in the horizontal reference plane perpendicular to the build direction with columnar-like arrays extending from ~12 to >60 µm in length and corresponding spatial dimensions of 1-3 µm. These observations were observed by the use of optical metallography, and scanning and transmission electron microscopy. The hardness measurements were taken both on the atomized powder and the Cu components. …

Effect Of Process Parameter On Temperature Distribution, Microstructure, And Mechanical Properties Of Self-Reacting Friction Stir Welded Aluminum Alloy 6061-T651, Monica Adriana Torres

Open Access Theses & Dissertations

Self-reacting friction stir welding is the latest FSW tool configuration developed, it employs two shoulders--one on top and one on the bottom of the workpiece-- this tool configuration offers many advantages over conventional welding techniques. However, the current lack of information and specifications limits its understanding and application. This investigation analyzed the effect of process parameters on temperature distribution, microstructure evolution, and final mechanical properties of 6061-T651 SR-FS welds. A factorial experiment was carried out, in which three-process parameters were analyzed--rotational speed, travel speed, and tool plunge force-- three levels were analyzed for each parameter, except for a tool plunge …

Fabrication And Characterization Of Nanocrystalline Yttrium Oxide Thin Films For Electronic Device Applications, Mudavakkat Vikas Haridas

Open Access Theses & Dissertations

This thesis presents the optimization of growth conditions for fabricating nanocrystalline Yttrium Oxide (Y2O3) thin films on silicon and optical grade, high quality quartz substrates in order to study its structural, optical and electrical properties for electronic device applications.

Commercially Y2O3 has proven to be difficult to fabricate at high quality due to its high temperature growth requirements and the need to alter established fabrication methods for electronic devices. A high temperature requirement for high quality poses a problem for research and analysis. This calls upon for an optimization of the growth conditions to facilitate fabrication of thin films for …

The Effect Of Cr, Si And B On The Oxidation Behavior On Three Nb-Based Alloys, David Alvarez

Open Access Theses & Dissertations

Nb-based alloys are of particular interest to replace the current Ni-based superalloys for high-temperature structural applications. One important limitation to improve the efficiency of gas-turbine engines is the temperature limit of current materials being used. By allowing the temperature to increase, the efficiency will increase. Nb-based alloys have high melting points and adequate mechanical properties but the oxidation resistance is still inadequate.

This research focuses on the oxidation behavior of three Nb-based alloys to study the effect of Cr and Si variation and look at the effect of Boron. Boron can form a glassy borosilicate which is viscous at high …

Development Of Thermo-Regulating Fabric Using Phase Change Material (Pcm), Prasad S. Bhatkhande

Master's Theses and Doctoral Dissertations

This research study concentrates on use of phase change material (PCM) in textiles which can produce thermo-regulating characteristics to control body temperature useful for various daily wear and technical textiles. The latent heat which is released or absorbed during the process of phase change is studied and discussed in this research. The PCMs are encapsulated into tiny microcapsules to protect from washing out or abrasion. These microcapsules are bounded onto the fabric surface by using a binder. The microcapsules and their effectiveness are tested by using SEM, Optical Microscope, DSC and Comfort tester. The testing is further extended to the …

Rate-Dependent Stiffening And Strain Localization In Physically Associating Solutions, Kendra Erk, Kenneth R. Shull

School of Materials Engineering Faculty Publications

Model physically associating solutions of acrylic triblock copolymer molecules in a midblock-selective solvent displayed non-linear strain-stiffening behavior which transitioned to rapid strain softening during shear start-up experiments at reduced rates spanning almost four orders of magnitude. Softening was believed to result from the shear-induced formation of highly localized regions of deformation in the macromolecular network. This behavior was accurately captured by a model that incorporated the strain energy and relaxation behavior of individual network strands in the solution. Flow curves predicted from the model were non-monotonic, consistent with the onset of flow instabilities at high shear rates. The non-linear stress …

Development And Characterization Of The Oxidation Behavior Of Various High Temperature Niobium Based Alloys, Benedict Isabel Portillo

Open Access Theses & Dissertations

The oxidation response of various niobium based refractory alloys from the Nb-Mo-Si-B-X alloy system has been examined at temperatures between 700 and 1400°C in air. The development of these alloys was part of an ongoing effort to develop and discover a new materials system capable of replacing nickel based super alloys. Additions of titanium were found to provide limited oxidation resistance. A discontinuous layer of TiO2 was observed to from at temperatures above 1100°C. Alloys containing titanium additions were observed to suffer from pest oxidation at low and intermediate temperatures due to the development of Nb2O5. Poor oxidation resistance at …

Density Functional Theory Study On The Electronic Structure Of N- And P-Type Doped Srtio3 At Anodic Solid Oxide Fuel Cell Conditions, S. Suthirakun, Salai Cheettu Ammal, G. Xiao, Fanglin Chen, Hans-Conrad Zur Loye, Andreas Heyden

Faculty Publications

The electronic conductivity and thermodynamic stability of mixed n-type and p-type doped SrTiO3 have been investigated at anodic solid oxide fuel cell (SOFC) conditions using density functional theory (DFT) calculations. In particular, constrained ab initio thermodynamic calculations have been performed to evaluate the phase stability and reducibility of various Nb- and Ga-doped SrTiO3 at synthesized and anodic SOFC conditions. The density of states (DOS) of these materials was analyzed to study the effects of n- and p-doping on the electronic conductivity. In agreement with experimental observations, we find that the transformation from 20% Nb-doped Sr-deficient SrTiO3 to a non-Sr-deficient phase …

A Comparison Of Two Engineering Outreach Programs For Adolescents, Louis S. Nadelson, Janet M. Callahan

Materials Science and Engineering Faculty Publications and Presentations

There is continued growth and development of outreach programs designed to increase pre-college students’ awareness and understanding of engineering as a profession and as a career. These outreach programs vary in format and in the groups targeted for participation but maintain the same fundamental goal of increasing participant knowledge of engineering. Many of these outreach programs also maintain the implicit goal of increasing the participants' knowledge and attitudes toward college. The additional resources and funding that are commonly allocated to support outreach programs frequently involve documenting accountability which motivates evaluation of program impact. Therefore, many outreach events include program evaluation …

Solution Phase And Membrane Immobilized Iron-Based Free Radical Reactions: Fundamentals And Applications For Water Treatment, Scott Romak Lewis

University of Kentucky Doctoral Dissertations

Membrane-based separation processes have been used extensively for drinking water purification, wastewater treatment, and numerous other applications. Reactive membranes synthesized through functionalization of the membrane pores offer enhanced reactivity due to increased surface area at the polymer-solution interface and low diffusion limitations. Oxidative techniques utilizing free radicals have proven effective for both the destruction of toxic organics and non-environmental applications. Most previous work focuses on reactions in the homogeneous phase; however, the immobilization of reactants in membrane pores offers several advantages. The use of polyanions immobilized in a membrane or chelates in solution prevents ferric hydroxide precipitation at near-neutral pH, …

Fabrication And Study Of Molecular Devices And Photovoltaic Devices By Metal/Dielectric/Metal Structures, Bing Hu

University of Kentucky Doctoral Dissertations

A new class of electrodes with nanometer-scale contact spacing can be produced at the edge of patterned metal/insulator/metal this film structures. A key challenge is to produce insulator layers with low leakage current and have pristine metal contacts for controlled molecular contacts. Atomic layer deposition of high quality Al₂O₃ thin films onto Au electrodes was enabled by surface modification with a self-assembled monolayer of -OH groups that react with a monolayer of trimethylaluminum gas source. Ar ion milling was then used to expose the edge of the Au/dielectric/Au structure for molecular electrode contacts. The junctions are characterized …

Studies On Silicon Nmr Characterization And Kinetic Modeling Of The Structural Evolution Of Siloxane-Based Materials And Their Applications In Drug Delivery And Adsorption, Jyotrhirmai Ambati

University of Kentucky Doctoral Dissertations

This dissertation presents studies of the synthetic processes and applications of siloxane-based materials. Kinetic investigations of bridged organoalkoxysilanes that are precursors to organic-inorganic hybrid polysilsesquioxanes are a primary focus. Quick gelation despite extensive cyclization is found during the polymerization of bridged silane precursors except for silanes with certain short bridges. This work is an attempt to characterize and understand some of the distinct features of bridged silanes using experimental characterization, kinetic modeling and simulation. In addition to this, the dissertation shows how the properties of siloxane- materials can be engineered for drug delivery and adsorption.

The phase behavior of polymerizing …

Nanostructured Arrays For Sensing And Energy Storage Applications, Raghu Mangu

University of Kentucky Doctoral Dissertations

Vertically aligned multi walled carbon nanotube (MWCNT) arrays fabricated by xylene pyrolysis in anodized aluminum oxide (AAO) templates without the use of a catalyst, were integrated into a resistive sensor design. The steady state sensitivities as high as 5% and 10% for 100 ppm of NH₃ and NO₂ respectively at a flow rate of 750 sccm were observed. A study was undertaken to elucidate (i) the dependence of sensitivity on the thickness of amorphous carbon layers, (ii) the effect of UV light on gas desorption characteristics and (iii) the dependence of room temperature sensitivity on different NH_{3 …}

Mse News 2011, Department Of Materials Science And Engineering, Michigan Technological University

Department of Materials Science and Engineering Annual Reports

Table of Contents

• New Fund and Center: a Challenge, an Opportunity, and an Appeal from Chair Mark Plichta
• MSE Scientist: Positioned for Success with Unique Program
• Student Accomplishments and Awards
• Department News
• Alumni Updates

Phase Change Materials As A Thermal Storage Device For Passive Houses, Kevin Ryan Campbell

Dissertations and Theses

This study describes a simulation-based approach for informing the incorporation of Phase Change Materials (PCMs) in buildings designed to the "Passive House" standard. PCMs provide a minimally invasive method of adding thermal mass to a building, thus mitigating overheating events. Phase change transition temperature, quantity, and location of PCM were all considered while incrementally adding PCM to Passive House simulation models in multiple climate zones across the United States. Whole building energy simulations were performed using EnergyPlus from the US Department of Energy. A prototypical Passive House with a 1500 Watt electric heater and no mechanical cooling was modeled. The …

A Feasibility Study Of Model-Based Natural Ventilation Control In A Midrise Student Dormitory Building, Steven James Gross

Dissertations and Theses

Past research has shown that natural ventilation can be used to satisfy upwards of 98% of the yearly cooling demand when utilized in the appropriate climate zone. Yet widespread implementation of natural ventilation has been limited in practice. This delay in market adoption is mainly due to lack of effective and reliable control. Historically, control of natural ventilation was left to the occupant (i.e. they are responsible for opening and closing their windows) because occupants are more readily satisfied when given control of the indoor environment. This strategy has been shown to be effective during summer months, but can lead …